100% found this document useful (1 vote)
43 views1 page

Zinc Oxide Compounded Paste

Uploaded by

alberto webb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
43 views1 page

Zinc Oxide Compounded Paste

Uploaded by

alberto webb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Printed on: Fri Jan 05 2024, 09:55:49 PM(EST) Status: Currently Official on 06-Jan-2024 DocId: GUID-46DA600B-7D26-4394-A999-E1176EBF773F_2_en-US

Printed by: USP NF Official Date: Official as of 01-May-2019 Document Type: USP @2024 USPC
Do Not Distribute DOI Ref: t0ltr DOI: https://doi.org/10.31003/USPNF_M89710_02_01
1

Change to read: gradually raising the temperature until the mass is


thoroughly charred. Ignite the mass until the residue is
uniformly yellow, and cool. Dissolve the residue in 10 mL
Zinc Oxide ▲Compounded▲ (USP 1-May-2019) of 2 N sulfuric acid, warming if necessary to dissolve.
Paste Titrimetric system

(See Titrimetry á541ñ.)▲ (USP 1-May-2019)
DEFINITION Mode: Direct titration
Titrant: 0.05 M edetate disodium VS
Change to read: Endpoint detection: Visual
Zinc Oxide ▲Compounded▲ (USP 1-May-2019) Paste contains NLT Analysis: Transfer the Sample solution to a beaker, and rinse
24.0% and NMT 26.0% of zinc oxide (ZnO). Prepare Zinc the crucible with small portions of water until the combined
Oxide ▲Compounded▲ (USP 1-May-2019) Paste as follows. solution and rinsings measure 50 mL. Add 15 mL of
ammonia–ammonium chloride buffer TS and 1 mL of
eriochrome black TS, and titrate with Titrant until the
Zinc Oxide 250 g solution is blue in color. Each milliliter of Titrant is
Starch 250 g equivalent to 4.069 mg of zinc oxide (ZnO).
Acceptance criteria: 24.0%–26.0%
White Petrolatum 500 g
PERFORMANCE TESTS
To make 1000 g
• MINIMUM FILL á755ñ: Meets the requirements
Mix the ingredients. ADDITIONAL REQUIREMENTS
• PACKAGING AND STORAGE: Package in well-closed

al
IDENTIFICATION containers, and avoid prolonged exposure to temperatures
• A. The residue obtained in the Assay is yellow when hot and exceeding 30°.
white when cool.
ASSAY
Change to read:
• PROCEDURE
Sample solution: Transfer 600 mg of Paste to a porcelain
ci
crucible. Heat gently until melted, and continue heating,
ffi
O

https://online.uspnf.com/uspnf/document/1_GUID-46DA600B-7D26-4394-A999-E1176EBF773F_2_en-US 1/1

You might also like