Product Catalogue

DC Power Solutions
Australia and New Zealand

Sma
r te
rE
n

erg
y
 Contents

Eaton’s Telecommunications Power Solutions Business...... 3 Software and Communications

DC Power Solutions PowerManagerII™ Control and

Monitoring Software .............................................. 35
Application and Product Selection Guide ................ 6
DCTools™ Configuration Software ........................ 37
3G Enterprise Power Solutions -
EPS2 Series ............................................................. 7 Rectifier Modules
3G Enterprise Power Solutions - APR24-3G Access Power Rectifier ........................ 39
EPS5 Series ............................................................. 9
APR48-3G Access Power Rectifier ........................ 41
Enterprise Extended Battery Module .....................11
APR48-ES Access Power Energy
3G Access Power Solutions - Saver Rectifier ....................................................... 43
APS3 and APS6 Series .......................................... 13
NPR48-ES Energy Saver Rectifier.......................... 45
3G Access Power Solutions -
APS6-600 Series.................................................... 15 CR48-3G Core Power Rectifier .............................. 47

3G Access Power Solutions - Control and Monitoring

APS12 Series ......................................................... 17 ASC48-ES Solar Charger........................................ 49
DV2 - 3G Access Power Solutions SC200 System Controller ...................................... 51
with Batteries ........................................................ 19
CellSure™ Battery Monitoring and
DV2 - 3G Metro Power Solutions........................... 21 Fault Diagnosis ...................................................... 53
DV2-N - 3G Core Power Solutions ......................... 23 SiteSure-3G™ ........................................................ 55
DV2 - 3G Core Power Solutions ............................. 25
Outdoor Enclosures
Customer Premises Equipment Whisper Cabinet™ Roadside
MPS12-30 Micro Power Solution........................... 27 Telecom Equipment Enclosures ............................ 57

Echo Outdoor Equipment

Inverter Power Solutions
Enclosures ............................................................. 59
Matrix™ Modular Inverter ..................................... 29
Bullet™ Optical Fibre Equipment
Matrix™ 2000 Standalone Inverter........................ 31 Enclosures ............................................................. 61

Telecom Inverter Solution ...................................... 33 ORC™ Roadside Telecom

Equipment Enclosures .......................................... 63

Mini Shelter Outdoor Power

and Equipment Enclosure ..................................... 65

2 EATON DC Power Solutions Catalogue

 Eaton’s Telecommunications Power Solutions Business

Our Business answering tomorrow’s Design for Environment (DfE) Comprehensive Range
needs today. Follow the and Life Cycle Assessment
Eaton is a power charge with Eaton. Visit are core parts of the Eaton Our telecom power solution
management company eaton.com/electrical. product development range includes AC and DC
providing energy-efficient process. They ensure that power systems, power
solutions that help our a product is safe, uses and ancillary equipment
customers effectively Environmental Standards management software,
resources wisely, and fully
manage electrical, hydraulic Eaton strives for the sustainable over the whole cabinets and enclosures,
and mechanical power. A highest environmental life cycle. and other products. Eaton
global technology leader, standards across both our also offers a wide range
Eaton acquired Cooper operations and products. of DC services including
Industries plc in November Our commitment goes
Unsurpassed Experience design, installation and
2012. Eaton serves the beyond compliance with Eaton has in excess of 40 commissioning remote
needs of customers located existing regulations. We are years experience of working monitoring, turnkey
in over 175 countries. For recognised as an industry closely with customers integration and site
more information, visit leader in creating safe to deliver tailored power support, to provide a
www.eaton.com. workplaces and conserving management solutions for seamless solution.
At Eaton, we’re energised world resources. communications networks
by the challenge of powering Eaton is committed to
around the world. Delivery
a world that demands environmental stewardship Eaton’s global scale
more. With over 100 years and participates in a Customer led Solutions manufacturing and logistic
experience in electrical power number of volunteer capability means that
Eaton’s insight into customer
management, we have the government partnership products and services can be
needs is demonstrated
expertise to see beyond programs worldwide. delivered with maximum cost-
through its products in
today. From groundbreaking effectiveness and with the
We were among the terms of reliability, efficiency,
products to turnkey design delivery speed and flexibility
first diversified industrial smart energy features,
and engineering services, that you expect.
companies to pursue global power density, and ease
critical industries around the
ISO 14001 certification of installation, Intelligent
globe count on Eaton.
- a rigorous standard for monitoring and control
We power businesses with managing and improving capabilities add flexibility,
reliable, efficient and safe environmental performance. precision, reliability, and
electrical power management automation - without
solutions. Combined with Today, virtually all of Eaton’s added complexity.
our personal service, support facilities worldwide have
and bold thinking, we are earned this designation.

eaton.com/telecompower 3
 Eaton’s Telecommunications Power Solutions Business

Services Capability Design Services Integration Services Power Monitoring

Eaton’s offers a wide range Skilled engineering staff can Our telecommunications Eaton can provide 24 x
of DC secure power services provide a full design service integration services provide 7 DC power system and
including power quality for DC power systems to complete install, testing and battery monitoring, and
evaluation, sizing, design specifically suit individual integration services for any provide remote diagnostics
consultancy, installation and applications and sites. type of communications or to maximize responsiveness
commissioning, full project other electronic equipment, and uptime, Monthly
management and turnkey World-Wide On-Site to world leading standards performance reports and
integration. Our individually of quality. trend analysis assist optimum
tailored service contract plans Services system performance.
Typical projects Eaton has
can provide ongoing service Eaton’s fully trained customer completed include the
maintenance, training, after- service engineers can carry integration of network
sales service, and repairs, out all installation tasks access equipment into
Eaton’s global presence or supervise and assist roadside cabinets and the
ensures quick response times local staff. on-site installation and
for all of our customers.
commissioning of telecoms
equipment.
Eaton is now applying this
expertise to the provision
of integration services
for original equipment
manufacturers and
network operators.

4 EATON DC Power Solutions Catalogue

 Eaton’s Telecommunications Power Solutions Business

After-Sales Service and Options include extended Training

warranty periods, unlimited
Repairs out-of- warranty repairs, Eaton offers a comprehensive
Eaton DC Regional Repair immediate replacement, range of training courses
Sites, staffed by fully trained on-site maintenance, designed to provide the right
technicians, are strategically and battery testing and level of product knowledge
located around the world conditioning. Special terms with practical demonstrations
to provide rapid turnaround and conditions apply to some and hands-on opportunities.
times. Individually tailored DC services. Courses can be arranged
service contracts are also at an Eaton location or at a
available so customers can customer’s site.
choose the ongoing service
package that best suits their
requirements.

eaton.com/telecompower 5
 DC Power Solutions

Application and Product Selection

Guide for Eaton DC Power Solutions

Eaton DC Power Solutions

Application Enterprise Access Power Metro Core
PowerSolutions Solutions1 PowerSolutions2 PowerSolutions3
1-744A, 24V or Up to 2500A, Up to 15,360A,
48V 24V or 48V 48V
Customer Premises PBX/VoIP
Equipment Wireless Access
Wireless Mini/metro sites
Base transceiver stations (BTS)
Base station controllers (BSC)
Main switches
Wireline Fibre transmission systems
Digital microwave radio
Broadband voice data services
Satellite earth stations

1. Including DV2 (Data-Voice-Video) Power Solutions with APR rectifier modules.

2. Including DV2 (Data-Voice-Video) Power Solutions with NPR rectifier modules.
3. Systems with higher output are also available

6 EATON DC Power Solutions Catalogue

DC Power Solutions
DC Power Solutions

3G Enterprise Power Solutions -

EPS2 Series
The Communication features of the
are the ideal SC200 system controller
solution for converged data include TCP/IP, SNMP and an
networks and low power tele- onboard web server allowing
communications applications access with standard web
requiring compact, efficient and browsers. The SC200 also
flexible DC power supplies. supports GSM cellular
(including text messaging) and
This EPS2 series is a 19” rack
standard PSTN modems.
mounted system and is
available with up to two of the The Enterprise systems include
Eaton 3G Enterprise or Access an integral DC distribution panel
48V rectifier modules providing with easy to fit push-in circuit
a total output of up to 4000W. breakers and low voltage
disconnect contactor to prevent
The versatile SC200 system
over discharging of the optional
controller features a front
backup batteries.
access USB port for ease of
system setup along with a Typical applications include
RS232 rear port and a 10BaseT providing secure power for
Ethernet port for remote customer premises equipment,
networking and roadside cabinets, converged
communications. VoIP/data networks, PoE, IP
routers and small PABX’s.

19” rack mounting

High power density
Intelligent system controls
Pre-configured software
Onboard secure web server
Push-in easy to fit circuit breakers
Low voltage disconnect
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Easy to use menu & full color display
Optional batteries
Compatible with Eaton’s Energy Saver (ES) rectifier

eaton.com/telecompower 7
 DC Power Solutions

Technical Specifications
AC Supply Nominal: 120V, 240V Battery* Eaton Extended Battery Module (EBM)
Operating Range: 90V – 275V 5PX version - 5PXEBM48RT (available globally)
Power Factor † >0.99 (50 – 100% Output Current) 5130 version - 103006587-6591 (EMEA only)Weight:
Efficiency † >96% peak 29.5kg [65lb]
>95% (20% to 100% load, 230Vac) Dimensions (H,W,D*): 85mm (2U), 432mm (19”
mounting), 487mm
*Additional space is required at the rear for cables.
DC Output 43 – 57.5V
Typical Run time values* (see graph).
Voltage Range
DC Output 240V AC: APR48-ES: 4.0kW
Power APR48-3G: 3.6kW
(maximum*) † EPR48-3G: 1.8kW

120V AC: APR48-ES: 2.3kW

APR48-3G: 2.2kW
EPR48-3G: 1.1kW

* Based on two rectifiers fitted, refer to rectifier

data sheets.

Operating Rated: -10°C to +50°C [-14°F to +122°F]

Temperature Extended*: -40°C to +70°C [-40°F to +158°F]
Range
*Output current is derated above 50°C [122°F]

Dimensions 2U , 19” mounting, 14.1” [360mm]*

H,W,D
* Additional clear depth space is required for )
exhaust air.
= Required number of battery modules.

*Battery times are approximate and vary depending

System SC200 on factors such as:
Controller - load configuration
DC Distribution 12-way circuit breakers (2 x Battery, 10 x Load) - battery charge
Module Circuit breaker type: Magnetic/Hydraulic, push fit - battery age and temperature.

Battery circuit breakers: Heinemann AC1R Series * Other battery options available - consult your local
Typical ranges available: 30A, 40A, 50A, 60A, 70A Eaton agent.
Battery Cables CKBATT-02 Eaton EBM 5130 connection cable,
Load circuit Breakers: Heinemann JC1S Series 2000mm long
Typical ranges available: 6A,10A, 15A, 20A, 25A, or CKBATT-01 ‘other batteries’ connection cable,
30A 2000mm long
Communication USB direct Equipment Customer Equipment Connection Cable
Features 10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP, Cable CKLOAD-00 10-way connection loom, 1000mm long
Modbus-RTU and on board web server EBM Rack Included with the EBM as standard
RS232 to external PSTN or GSM modem (modem Mounting Kit
not included)
Rectifier Blank For unused rectifier positions
Panels
All products comply with International Standards.

North America UL (Canada, USA), FCC Class B

DCTools Configuration software. Europe CE
Free download from: Australia and New Zealand C-Tick
www.powerware.com/downloads
PowerManagerII Remote control and monitoring software In the interests of continual product improvement all specifications are
subject to change without notice.

† Power factor, efficiency and DC output power are dependant on

rectifier model fitted. Refer to the rectifier data sheet for further
details.

8 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power Solutions
DC Power Solutions

3G Enterprise Power Solutions -

EPS5 Series
The RS232 rear port and a 10BaseT
are the ideal Ethernet port for remote
solution for converged data networking and
networks and low power tele- communications.
communications applications
Communication features of the
requiring compact, efficient and
SC200 system controller
flexible DC power supplies.
include TCP/IP, SNMP and an
The EPS5 series is a 19” rack onboard web server allowing
mounted system and is access with standard web
available with up to five of the browsers.
Eaton 48V 3G Enterprise power
The Enterprise systems include
rectifier modules, providing a
an integral DC distribution panel
total output of up to 4500W.
with easy to fit push-in circuit
The modular design of the
breakers and low voltage
system allows users to simply
disconnect contactor to prevent
add additional rectifiers and
over discharging of the optional
batteries as required to meet
backup batteries.
future growth of their network
power demand, thus, better Typical applications include
protecting the initial power providing secure power for
system investment. customer premises equipment,
roadside cabinets, converged
The versatile SC200 system
VoIP/data networks, PoE, IP
controller features a front
routers and small PABX’s.
access USB port for ease of
system setup along with a

19” rack mounting

High power density
Intelligent system controls
Pre-configured software
Onboard secure web server
Push-in easy to fit circuit breakers
Low voltage disconnect
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Easy to use menu & full color display
Optional batteries

eaton.com/telecompower 9
 DC Power Solutions

Technical Specifications
AC Supply Nominal: 120V, 240V Battery* Eaton Extended Battery Module (EBM)
Operating range: 90V – 275V 5PX version - 5PXEBM48RT (available globally)
Power Factor † >0.99 (50 – 100% output current) 5130 version - 103006587-6591 (EMEA only)
Efficiency † 91% (50 – 100% output current)
Weight: 29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19”
DC Output 43 – 57.5V mounting), 487mm
Voltage Range *Additional space is required at the rear for cables.
DC Output 240V AC: 4.5kW
Power 120V AC: 2.25kW Typical run time values* (see graph).
(maximum*) †
* Based on five rectifiers fitted, refer to EPR48-3G
rectifier data sheets.

Operating Rated: -10°C to +50°C [-14°F to +122°F]

Temperature Extended*: -40°C to +70°C [-40°F to +158°F]
Range
*Output current is derated above 50°C [122°F]

Dimensions 3U, 19” mounting, 13.2” [335mm]*

H,W,D
* Additional clear depth space is required for
exhaust air.
)

System SC200 = Required number of battery modules.

Controller
DC Distribution 12-way circuit breakers (2 x battery, 10 x load)
*Battery times are approximate and vary depending
Module Circuit breaker type: magnetic/hydraulic, push fit
on factors such as:
- load configuration
Battery circuit breakers: Heinemann AC1R Series
- battery charge
Typical ranges available: 30A, 40A, 50A, 60A, 70A
- battery age and temperature.
Load circuit breakers: Heinemann JC1S Series
* Other battery options available - consult your local
Typical ranges available: 6A,10A, 15A, 20A, 25A,
Eaton agent.
30A
Battery Cables CKBATT-02 Eaton EBM 5130 connection cable,
Communication USB direct
2000mm long.
Features 10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
or CKBATT-01 ‘other batteries’ connection cable,
Modbus-RTU and on board web server
2000mm long.
RS232 to external PSTN or GSM modem (modem
Equipment Customer equipment connection cable
not included)
Cable CKLOAD-00 10-way connection loom, 1000mm long
Rectifier Blank For unused rectifier positions
EBM Rack Included with the EBM as standard
Panels
Mounting Kit

DCTools Configuration software.

Free download from: All products comply with international standards.
www.powerware.com/downloads
North America UL (Canada, USA), FCC Class B
PowerManagerII Remote control and monitoring software
Europe CE
Australia and New Zealand C-Tick
† Power factor, efficiency and DC output power are dependant on
rectifier model fitted. Refer to the rectifier data sheet for further In the interests of continual product improvement all specifications are
details. subject to change without notice.

Eaton, CellSure, SiteSure, DCTools and

10 EATON DC Power Solutions Catalogue PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power Solutions
DC Power Solutions

Enterprise Extended Battery Module

The The scalability of the EBM

ensures that your investment is
) is designed as an protected into the future as the
optional integrated backup demands of your network
power source to the 3G increase. Simply add more
Enterprise Power Systems, EBM modules as your network
providing secure power during grows.
AC grid failure for anything from
EBM has an 18Ahr capacity and
orderly shutdowns through to
is service maintenance free for
extended runtimes for
the life of the battery module.
continuity of service.
Battery function is monitored
Multiple battery modules can and controlled by the power
be connected together to system controller for complete
Eaton 5PX version pictured achieve increased backup battery protection.
capacity for a given output
demand.
This module is slim and rack
mountable to suit the likely
applications for these systems
such as server room racks.
The battery modules use
simple ‘plug and play’ cables for
connecting the Enterprise
Power Solution. No specialized
tools are required, thus making
installation very easy in an IT
environment.

Easy to install
Slimline 19” rack mounting
Extended runtime -18Ahr capacity
Modular and scaleable
Service maintenance free VLRA batteries

eaton.com/telecompower 11
 DC Power Solutions

Technical Specifications
DC Output 48V nominal
Voltage
DC Output 18Ahr
Capacity Maximum input/output current should not exceed
55Amps

Weight 29.5kg
Dimensions 85mm (2U), 432mm (19” mounting), 487mm*
H,W,D
* Additional space is required at the rear for cables.

Typical Run Time Values*

= Required number of battery modules.

*Battery times are approximate and vary depending

on factors such as:
- load configuration
- battery charge
- battery age and temperature.
Order Number Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)

All products comply with international standards. Contact your local

Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
North America UL listed
Europe CE

In the interests of continual product improvement all specifications are

subject to change without notice.

Eaton, CellSure, SiteSure, DCTools and

12 EATON DC Power Solutions Catalogue PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power Solutions
Eaton DC Power Solutions

3G Access Power Solutions -

APS3 and APS6 Series

The SC200 series of system

controller offers highly advance
19” sub-rack control and monitoring features
. including Smart Alarms – a
Modular 3U and 6U options
®
The Eaton 3G Access Power configurable logic for
Up to 6 rectifier modules
Solutions are ideal for low to automated site energy control.
Pre-configured software The SC200 also offers a
medium power telecommuni-
High power density (24/48V: 300/250A, 6U, 19”) cations applications, offering complete array of
Multiple AC option (1Ø, 3Ø, 2Ø) compact, efficient, flexible and communications options with
reliable secure DC power Ethernet, GSM cellular
Fast on-line expansion of rectifiers (hot-swap) (including text messaging),
supply.
High efficiency and unity power factor standard modem and TCP/IP
Priority and non priority options for DC distributions These 19” rack mount systems communications options. The
are available with up to 3 or 6 of slightly lower specification
Compatible with Eaton Energy Saver (ES) Rectifiers the Eaton 3G Access power SC100 is also available.
rectifier modules as either 24V
or 48V with output up to 280A. Typical applications include
For superior operating providing secure power for
efficiency to further reduce customer premises equipment,
operating costs, these systems roadside terminals, data
are also compatible with Eaton networks and IP routers. The
Energy Saver (ES) Access 3G Access Power Solutions are
power rectifiers which provides pre-configured and all system
operating efficiency in excess settings are fully adjustable in
of 96%. software and stored in
transferable, configuration files
The systems include an integral for repeatable and quick one-
DC distribution panel with a step system set-up.
range of MCB and Low Voltage
Disconnect (LVD) options
available.

eaton.com/telecompower 13
 DC Power Solutions

Technical Specifications
Input Software
AC Supply† 100 – 240V, 50 – 60Hz (nominal) DCTools Configuration software.
175 – 275V full power output up to 50°C [122°F] Free download from:
90 – 175V reduced power output www.powerware.com/downloads
Power Factor† >0.99 (50 – 100% Output Current) PowerManagerII Remote control and monitoring software
Efficiency† APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak, Certifications
>95% (20% to 100% load, 230Vac) All products comply with international standards.

Output
DC Output 21.5V – 32V / 43-57.5V In the interests of continual product improvement all specifications are
Voltage Range subject to change without notice.
DC Output APS3-300 48V: 6.00kW
Power 24V: 4.32kW
(maximum)* APS6-300 48V: 8.90kW
APS6-500 48V: 12.0kW
24V: 8.64kW
* Ratings are stated without LVD’s fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.

Environmental
Operating -40°C to +70°C [-40°F to +158°F]
Temperature
Range* * Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]

Mechanical
Dimensions APS3-300: 3U, 19” mounting, 315mm [12.4”]*
H,W,D APS6-300: 6U, 19” mounting, 335mm [13.2”]*
APS6-500: 6U, 19” mounting, 335mm [13.2”]*

* Additional clear space is required for exhaust air.

System
System SC200 or SC100
Controller
DC Distribution APS3-300: 12-way circuit breakers
Module (2 x battery, 10 x load)
APS6-300: 20-way circuit breakers
(4 x battery, 16 x load)
APS6-500: 20-way circuit breakers
(4 x battery, 16 x load)
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage APS3-300: optional battery LVD
Disconnect APS6-300: optional 200A LVD’s for battery
(LVD) or load, or both.
APS6-500: optional 400A LVD’s for battery
or load, or both.
Rectifier Blank For unused rectifier positions
Panels
Options External Surge Protection

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.
.

14 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
 DC Power Solutions
Eaton DC Power Solutions

3GAccess
3G AccessPower
PowerSolutions
Solutions
- -
APS6-600
APS6-600Series
Series

Features 48V secure DC power up to The SC200 series of system

controller offers highly
19” sub-rack 18kW. advanced control and
Compact 6U system The Eaton® 3G Access Power monitoring features including
Solutions are ideal for low to Smart Alarms – a configurable
Up to 6 rectifier modules
medium power telecommuni- logic for automated site energy
Pre-configured software cations applications, offering control. The SC200 also offers a
High power density (48V: 360A, 6U, 19”) compact, efficient, flexible and complete array of
reliable secure DC power communications options with
Multiple AC option (1Ø, 3Ø, 2Ø)
supply. Ethernet, GSM cellular
Fast on-line expansion of rectifiers (hot-swap) (including text messaging),
This 19” rack mount system is standard modem and TCP/IP
High efficiency and unity power factor
available with up to 6 of the communications options. The
Priority and non priority options for DC distributions Eaton 3G, NPR48-ES Network slightly lower specification
Compatible with Eaton’s Network Energy Saver (ES) Rectifier power rectifier modules with a SC100 is also available.
total output up to 360A. For
superior operating efficiency to Typical applications include
further reduce operating costs, providing secure power for
this system is offered as customer premises equipment,
standard with Eaton Energy roadside terminals, data
Saver (ES) Network power networks and IP routers. The
rectifier which provides 3G Access Power Solutions are
operating efficiency in excess pre-configured and all system
of 96%. settings are fully adjustable in
software and stored in
The systems include an integral transferable configuration files
DC distribution panel with a for repeatable and quick one-
range of MCB and Low Voltage step system set-up.
Disconnect (LVD) options
available.

eaton.com/telecompower 15
 DC Power Solutions

Technical Specifications
Input Software
AC Supply† 100 – 240V, 50 – 60Hz (nominal) DCTools Configuration software.
185 – 275V full power output up to 50°C [122°F] Free download from:
90 – 185V reduced power output www.powerware.com/downloads
Power Factor† >0.99 (50 – 100% Output Current) PowerManagerII Remote control and monitoring software
Efficiency† NPR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac) Certifications
CE
Output
DC Output 43.2-57.5V
Voltage Range In the interests of continual product improvement all specifications are
DC Output 48V: 18kW subject to change without notice.
Power
(maximum)* * Ratings are stated without LVDs fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.

Environmental
Operating -40°C to +70°C [-40°F to +158°F]
Temperature
Range* * Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]

Mechanical
Dimensions 6U, 19” mounting, 335mm [13.2”]*
H,W,D
* Additional clear space is required for exhaust air.

System
System SC200, Option for SC100
Controller
DC Distribution 20-way circuit breakers
Module (4 x battery, 16 x load)
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage Optional 400A LVDs for battery or load, or both.
Disconnect
(LVD)
Rectifier Blank For unused rectifier positions
Panels
Options External Surge Protection

† Power factor, efficiency, AC voltage range and output power are

dependent on the rectifier module. Refer to the rectifier data sheet for
more information.
.

16 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power Solutions
Eaton DC Power Solutions

3G Access Power Solutions -

APS12 Series
optimizing system efficiency,
and comprehensive alarm and
system status notifications,
The Eaton® 3G Access Power which are all designed to
Solutions are ideal for low to minimize operational expenses.
medium power telecommuni-
A comprehensive range of
cations applications, offering
other controller features
compact, efficient, flexible and
ensures maximum battery life
reliably secure DC power
and optimum system
supply.
performance under a wide
This 19” rack mount system range of environmental
has an integrated distribution conditions.
panel and is available with up to
The 3G Access Power
12 of the 48V Eaton 3G Access
Solutions are pre-configured
Power Rectifier modules or, for
and all system settings are fully
superior operating efficiency,
adjustable in software and
with Energy Saver (ES) Rectifier
stored in transferable,
modules with output up to
configuration files for
360A.
repeatable and quick one-step
The advanced SC200 system system set-up.
controller offers high-level
Typical applications include
communications capability for
providing secure power for
real time information. It also
cellular base stations, roadside
has built-in intelligence for
terminals, data networks and IP
routers.

Compact 9U, 19” sub-rack

Up to 12 rectifier modules
Compatible with Eaton Energy Saver (ES) Rectifiers
Pre-configured software
High power density (400A/9U)
Dual AC input
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Priority and non priority options for DC distributions

eaton.com/telecompower 17
 DC Power Solutions

Technical Specifications
Input Software
AC Supply† 100 – 240V, 50 – 60Hz (nominal) DCTools Configuration software.
175 – 275V full power output up to 50°C [122°F] Free download from:
90 – 175V reduced power output www.powerware.com/downloads
Dual AC input - 1Ø, 2Ø or 3Ø (one supply feed per PowerManagerII Remote control and monitoring software
6-rectifier shelf)
Power Factor† >0.99 (50 – 100% Output Current) Certifications
Efficiency† APR48-3G : 92% (50 – 100% Output Current) All products comply with international standards. Contact your local
APR48-ES : >96% peak Eaton DC representative for details on the specific product versions
>95% (20% to 100% load, 230Vac) available with these safety and EMC approvals:

Output Europe CE
DC Output 43 – 57.5V Australia / C-tick
Voltage Range New Zealand
DC Output APR48-3G : 17.2kW @ 48V
Power APR48-ES : 17.2kW @ 48V In the interests of continual product improvement all specifications are
(maximum) * * Ratings are stated without LVD’s fitted. In some subject to change without notice.
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB de-rating factors.

Environmental
Operating -40°C to +70°C [-40°F to +158°F]
Temperature Output current is derated above 40°C [104°F] and
Range below -10°C [14°F]

Mechanical
Dimensions 9U, 19” mounting, 335mm [12.4”]*
H,W,D
* Additional clear space is required for exhaust air.

System
System SC200 or SC100
Controller
DC Distribution 20-way circuit breakers (4 x Battery, 16 x Load)
Module
Communication USB direct*
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Low Voltage Optional battery LVD, or non priority LVD, or battery
Disconnect and non priority LVD’s. (Contactors 400A
(LVD) rated)
Rectifier Blank For unused rectifier positions
Panels
Options External Surge Protection

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

18 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power Solutions
Eaton DC Power Solutions

DV2--3G
DV2 3GAccess
AccessPower
Power Solutions
Solutions
with
withBatteries
Batteries
48V and 24V integrated which are all designed to
minimize operational expenses.
systems up to 20kW
A comprehensive range of other
The Eaton® Data-Voice-Video
controller features ensures
Access Power Solutions
maximum battery life and
range of DC power systems is
optimum system performance
designed to provide small to
under a wide range of
medium network applications
environmental conditions.
with compact, efficient, flexible
and secure DC power. Systems are pre-configured for
fast installation and set-up and
These DC power systems can
fully adjustable and transferable
accommodate either the 24V or
for repeatable one-step system
48V rectifier modules, including
set-up.
Eaton’s Energy Saver
Rectifiers, and up to eight 24V Typical applications are
or four 48V strings of high providing secure power for
capacity VRLA batteries. All cellular base transceiver
systems include an integral AC stations, WiMAX nodes, base
and DC distribution with station controllers, long-
flexible combinations of fuses distance transmission systems,
and MCBs, and an SC200 or local office switches and other
SC100 system controller. Low telecommunication switch
Voltage Disconnect (LVD) installations requiring
options are also available. distributed power.
The advanced SC200 system Typical Applications:
controller offers high-level
communications capability for Wireless BTS sites (CDMA
real time information. It also GSM/3G/UMTS)
has built-in intelligence for Transmission terminals
optimizing system efficiency,
Access nodes
and comprehensive alarm and
system status notifications, Local and central office
switching
Features
Intelligent system management features
Pre-configured software
High power density
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Range of DC distribution configurations
Integrated batteries and battery condition monitoring
Wide AC input voltage range
Seismic rated cabinet
Remote monitoring and control
Full length security door (optional)
Compatible with Eaton Energy Saver (ES) Rectifiers

eaton.com/telecompower 19
 DC Power Solutions

Technical Specifications
Specification
Input Options
AC Supply† 3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE AC Distribution Coordinated transient protection up to 40kA, 8/20 s
50/60Hz (nominal) Incoming isolator
Power Factor† >0.99 (20 – 100% Maximum System Current) Individual rectifier MCBs
Efficiency† >96% peak DC Distribution Up to 4 groups of MCBs or fuses. Each group
>95% (20% to 100% load, 230Vac) comprises up to:
9 x 18mm MCBs (1-63A), or
Output 6 x 27mm MCBs (10-125A), or
DC Output 20 – 57.5V 4 x DIN00 HRC fuses (20-160A)
Voltage Range
Typical DC APR24-3G : 14.4kW (500A @ 28.8V) † or Custom options available on request.
Output Power†* APR48-3G : 18 kW (375A @ 48V) Low Voltage Single or dual LVD configured as battery
APR48-ES : 20kW (416A @ 48V) Disconnect disconnect.
* Ratings are stated without LVD’s fitted. In some (LVD)
cases lower ratings may result when LVDs are Rectifier Blank For unused rectifier positions
used. Panels
SiteSure Input/output modules to monitor and control
external equipment
Environmental
CellSure Comprehensive battery monitoring and fault
Operating -25°C to +50°C
diagnosis system with patented state-of-health
Temperature
algorithms.
Range* * Output current is derated above 50°C [122°F]
Refer to rectifier data sheet for more information.
Software
PowerManagerII Remote control and monitoring software
Mechanical
DCTools Configuration Software. Free download from
Dimensions 2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
www.powerware.com/downloads
H,W,D
Weight 870kg [1914lb]
Typical maximum with 10 rectifier modules and 4 Certifications
x 48V/150Ah battery strings. All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
System
Europe CE
Rectifiers APR24-3G
Australia / C-tick, Seismic rating to NZS4203
APR48-3G
New Zealand
APR48-ES
System Controller SC100/SC200
In the interests of continual product improvement all specifications are
Communications USB direct* subject to change without notice.
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Batteries Typically up to 4 strings @ 48V, or 8 strings @ 24V,
600Ah total capacity.
Other battery configurations available.

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

20 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power Solutions
DC Power Solutions

DV2--3G
DV2 3GMetro
MetroPower
Power Solutions
Solutions
48V integrated systems up and optimum system
performance under a wide
to 80kW range of environmental
The conditions.
range
Eaton DV2 Metro Power
of DC power systems is
Solutions are pre-configured for
designed for telecommuni-
fast installation and set-up. All
cations network applications
system settings are fully
requiring compact, efficient and
adjustable in software and
flexible DC power.
stored in transferable config-
These DC power systems use uration files for repeatable one-
Eaton APR-3G or, for superior step system set-up.
operating efficiency, can be
Typical applications are
fitted with Energy Saver (ES)
providing 48V standby power
rectifier modules. AC and DC
for end-of-row and centralized
distribution is integral with
architecture such as local and
flexible combinations of fuses
central office switches and
and MCBs, and an SC200
other large switch installations,
system controller. Low Voltage
wireless switching centers and
Disconnect (LVD) options are
long-distance transmission
also available.
systems.
The advanced SC200 system
controller offers high-level
communications capability for Typical Applications:
real time information. It also
has built-in intelligence for Wireless MSC sites
optimizing system efficiency, (CDMA/GSM/3G UMTS)
and comprehensive alarm and Transmission terminals
system status notifications,
Local and central office
which are all designed to
switching
minimize operational expenses.
Point of presence (POP)
A comprehensive range of sites
other controller features
ensures maximum battery life

Features
Intelligent system management features
Pre-configured software
High power density
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Range of DC distribution configurations
Battery condition monitoring
Wide AC input voltage range
Seismic rated cabinet
Remote monitoring and control
Full length security door (optional)
Compatible with Eaton Energy Saver (ES) Rectifiers

eaton.com/telecompower 21
 DC Power Solutions

Technical Specifications
Specification
AC Supply† 3P+N+PE, 3P+PE, 2P+PE, 1P+N+PE AC Distribution Coordinated transient protection up to 40kA, 8/20 s
50/60Hz (nominal) Incoming isolator
Individual rectifier MCBs
Other options available depending on system DC Distribution A wide range of DC distribution elements are
capacity. available including:
Power Factor† >0.99 (20 – 100% Maximum System Current) 24 x 18mm MCBs (1-63A)
Efficiency† >96% peak 16 x 27mm MCBs (10-125A)
>95% (20% to 100% load, 230Vac) 10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
6 x DIN2 type HRC fuses (100-400A)
DC Output 40 – 57.5V 4 x DIN3 type HRC fuses (400-630A)
Voltage Range 4 x DIN4 type HRC fuses (800-1200A)
Typical DC APR48-3G : 72kW (1500A @ 48V) Low Voltage Single or dual LVD can be configured as battery or
Output Power†* APR48-ES : 80kW (1667A @ 48V) Disconnect load disconnect including non-priority load
* Ratings are stated without LVD’s fitted. In some (LVD) disconnect.
cases lower ratings may result when LVDs are Rectifier Blank For unused rectifier positions
used. Panels
SiteSure Input/output modules to monitor and control
external equipment
CellSure Comprehensive battery monitoring and fault
Operating -25°C to +50°C
diagnosis system with patented state-of-health
Temperature
algorithms.
Range* * Output current is derated above 50°C [122°F].
Refer to rectifier data sheet for more information.

PowerManagerII Remote control and monitoring software

DCTools Configuration Software. Free download from
Dimensions 2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
www.powerware.com/downloads
H,W,D
Weight 200kg [443lb]
Typical configuration with 40 APR-3G rectifier
modules. All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
Europe CE
Rectifiers APR48-3G
Australia / C-tick, Seismic rating to NZS4203
APR48-ES
New Zealand
System Controller SC100/SC200
Communications USB direct*
In the interests of continual product improvement all specifications are
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus- subject to change without notice.
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only

† Power factor, efficiency, AC voltage range and output power is

dependant on rectifier module fitted. Refer to the rectifier data sheet
for more information.

22 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
DC Power Solutions
Eaton DC Power Solutions

DV2-N--3G
DV2-N 3GCore
Core Power
Power Solutions
Solutions
48V integrated systems up and optimum system
performance under a wide
to 126kW range of environmental
The Eaton® Data-Voice-Video conditions.
Core Power Solutions range of
Eaton DV2 Core Power
DC power systems is designed Solutions are pre-configured for
for telecommunications
fast installation and set-up. All
network applications requiring system settings are fully
compact, efficient and flexible
adjustable in software and
DC power. stored in transferable
These DC power systems use configuration files for
the Eaton Energy Saver NPR-ES repeatable one-step system
rectifier module for superior set-up.
operating efficiency. AC and DC Typical applications are
distribution is integral with
providing 48V standby power
flexible combinations of fuses
for end-of-row and centralized
and MCBs, and an SC200
architecture such as local and
system controller. Low Voltage
central office switches and
Disconnect (LVD) options are
other large switch installations,
also available.
wireless switching centers and
The advanced SC200 system long-distance transmission
controller offers high-level systems.
communications capability for
real time information. It also
has built-in intelligence for Typical Applications:
optimizing system efficiency,
and comprehensive alarm and Wireless MSC sites
system status notifications, (CDMA/GSM/3G UMTS)
which are all designed to Transmission terminals
minimize operational expenses.
Local and central office
A comprehensive range of switching
other controller features Point of presence (POP)
ensures maximum battery life sites

Features
Intelligent system management features
Pre-configured software
High power density
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Range of DC distribution configurations
Battery condition monitoring
Wide AC input voltage range
Seismic rated cabinet
Remote monitoring and control
Full length security door (optional)
Standard fitment of the Eaton Energy Saver (ES) Rectifier

eaton.com/telecompower 23
 DC Power Solutions

Technical Specifications
Specification
Input Options
AC Supply† 3P+N+PE, 3P+PE AC Distribution Coordinated transient protection up to 40kA, 8/20µs
50/60Hz (nominal) Incoming isolator
Individual rectifier MCBs
Other options available depending on system DC Distribution A wide range of DC distribution elements are
capacity. available including:
Power Factor† >0.99 (20 – 100% Maximum System Current) 24 x 18mm MCBs (1-63A)
Efficiency† >96% peak 16 x 27mm MCBs (10-125A)
>95% (20% to 100% load, 230Vac) 10 x DIN00 type HRC fuses (20-160A)
6 x DIN1 type HRC fuses (63-250A)
Output 6 x DIN2 type HRC fuses (100-400A)
DC Output 43.2 – 57.5V 4 x DIN3 type HRC fuses (400-630A)
Voltage Range 4 x DIN4 type HRC fuses (800-1200A)
Typical DC NPR48-ES : 126kW (2520A @ 50V) Low Voltage Single or dual LVD can be configured as battery or
Output Power†* * Ratings are stated with LVDs not fitted. In some Disconnect load disconnect including non-priority load
cases lower ratings may result when LVDs are (LVD) disconnect.
used. Rectifier Blank For unused rectifier positions
Panels
SiteSure Input/output modules to monitor and control
Environmental
external equipment
Operating -25°C to +45°C
CellSure Comprehensive battery monitoring and fault
Temperature
diagnosis system with patented state-of-health
Range* * Output current is derated above 50°C [122°F].
algorithms.
Refer to rectifier data sheet for more information.

Software
Mechanical
PowerManagerII Remote control and monitoring software
Dimensions 2200mm [86.6”], 600mm [23.6”], 600mm [23.6”]
DCTools Configuration Software. Free download from
H,W,D
www.powerware.com/downloads
Weight 230kg [443lb]
Typical configuration with 42 NPR-ES rectifier
modules. Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
System
available with these safety and EMC approvals:
Rectifiers NPR48-ES – up to 42 rectifiers
Europe CE
System Controller SC100/SC200
Australia / C-tick, Seismic rating to NZS4203
Communications USB direct*
New Zealand
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server* In the interests of continual product improvement all specifications are
RS232 to external PSTN or GSM modem (modem subject to change without notice.
not included)
*SC200 only

† Power factor, efficiency, AC voltage range and output power

aredependent on the rectifier module. Refer to the rectifier data sheet
for more information.

24 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
DC Power Solutions
Eaton DC Power Solutions

DV2 --3G
DV2 3GCore
CorePower
Power Solutions
Solutions

48V integrated systems up limit, automatic equalize

charging and automatic battery
to 750kW condition monitoring.
The Eaton® Data-Voice-Video
Typical applications are
Core Power Solutions range of providing 48V standby power
DC power systems is designed
for centralized architecture such
for telecommuni-cations as local and central office
network applications requiring
switches and other large switch
high powered, efficient and installations, wireless switching
flexible DC power supplies.
centers, long-distance
These DC power systems use transmission systems and data
Eaton CR48-3G rectifier centers.
modules and include an integral Eaton DV2 Core Power
AC and DC distribution with
Solutions are pre-configured for
flexible combinations of fuses
fast installation and set-up. All
and MCBs, and an SC200
system settings are fully
system controller. Low voltage
adjustable in software and
disconnect (LVD) options are
stored in transferable
also available. DC distribution
configuration files for
cabinets can be connected in
repeatable one-step system
parallel where additional
set-up.
distribution space is required.
Systems up to 4000A can be
configured using internal
horizontal busbars, and up to Typical Applications
15,000A using external
Wireless MSC sites
busbars.
(CDMA/GSM/3G UMTS)
Intelligent system management Local and central office
features include battery switching
temperature compensation,
Point of presence (POP)
fast charge, battery current
sites
Data centers

Features
Intelligent system management features
Pre-configured software
High power density
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Range of DC distribution configurations
Battery condition monitoring
Wide AC input voltage range
Seismic rated cabinet
Remote monitoring and control
Full length security door (optional)

eaton.com/telecompower 25
 DC Power Solutions

Technical Specifications
Input Options
Nominal AC 3P+PE, 208VAC AC Distribution Coordinated transient protection up to 40kA, 8/20µs
Supply 3P+N+PE, Y 230/400VAC Incoming isolator
50/60Hz Individual rectifier MCBs
Power Factor >0.99* (20 – 100% Maximum System Current) DC Distribution A wide range of DC distribution elements are
Efficiency up to 92%* available including:
24 x 18mm MCBs (1-63A)
Output 16 x 27mm MCBs (10-125A)
DC Output 40 – 58V 10 x DIN00 type HRC fuses (20-160A)
Voltage Range 6 x DIN1 type HRC fuses (63-250A)
Typical DC 46kW - 750kW † 6 x DIN2 type HRC fuses (100-400A)
4 x DIN3 type HRC fuses (400-630A)
Output Power
4 x DIN4 type HRC fuses (800-1200A)
Low Voltage Single or dual LVD can be configured as battery or
Environmental Disconnect load disconnect including non-priority load
Operating -25°C to +50°C* (LVD) disconnect.
Temperature Rectifier Blank For unused rectifier positions
Range Panels
SiteSure Input/output modules to monitor and control
Mechanical external equipment
Dimensions 2000mm [78.7”], 600mm [23.6”], 600mm [23.6”] CellSure Comprehensive battery monitoring and fault
H,W,D diagnosis system with patented state-of-health
Weight 200kg [443lb] algorithms.
Typical configuration with 16 CR48-3G rectifier
modules. Software
PowerManagerII Remote control and monitoring software
System DCTools Configuration Software. Free download from
System Controller SC200 www.powerware.com/downloads

* Refer to rectifier specifications for more information. Certifications

† System output power will vary depending on rectifiers and batteries All products comply with International Standards. Contact your local
selected. Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
China MII
Europe CE
Australia / C-tick, Seismic rating to NZS4203
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice.

26 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Customer Premises
Eaton Equipment
DC Power Solutions

MPS12-30Micro Power Solution

MPS12-30
SecurePower
Micro MicroSolution
Power Solution for In-Home Optical Network Terminals (ONT)

Eaton’s MPS12-30 Micro The MPS12-30 is the ideal

Power Solution provides secure secure power protection unit
DC power for ‘next generation’ where continuation of critical
customer premise equipment services is the objective.
(CPE) including fibre based
communication and IP
telephony applications. An
integrated battery provides
secure power backup to critical
services such as phone,
medical alert, home automation
and security during a
commercial (mains) AC power
outage.
Typical backup time on battery
power is approximately 4 to 8
hours depending on factors
such as usage, battery age,
state of charge, and
environmental conditions. The
MPS12-30 indoor solution
greatly improves battery service
life compared to comparable
outdoor designs.

Features
Universal input range of 80 - 260VAC
12V DC (30W max.) output
Integrated, hot-swappable battery backup allows replacement
by the owner, without power interruption
Microprocessor controlled for maximizing reliability
Audible power failure alarm with mute
Digital outputs for remote monitoring
Wall mountable design for flexibility
Multiple LED design for AC power and battery status
indications

eaton.com/telecompower 27
 Customer Premises Equipment

Technical Specifications
Brief Technical Specifications Figure 1: 12V/7Ah Battery Capacity
AC Supply Input range: 80-260Vac Typical Backup time
Input frequency Range: 45-65Hz
30
Inlet: IEC inlet
DC Output Output power (max.): 30W
25
Nominal voltage: 12VDC
Output Voltage Range: 10.5 – 13.8VDC
20
Tolerance: 10.5V (-0.2V,+0.25V)

Load (Watts)
13.8V (-0.35V, +0.15V)
15
Output Protection: 80%
10Amps fuse soldered on PCB
10
Battery Typical type/rating: 12V/7Ah (see figure 1)
Discharge prevention: 10.5V ± 0.5V
5
Rated charging voltage: 13.7V ± 0.25V
Recharge time (internal battery): 4 hours to
90% without load after complete discharge 0
2 4 6 8 10 12 14 16 18 20
Charge current: 2.5A maximum Time (Hours)
Hot swappable
LED Indicator AC mode: green LED continuous
*Battery times are approximate and vary depending
Backup mode: yellow LED continuous on factors such as:
Battery low: yellow LED flashing - battery type
- load configuration
Battery replace: red LED flashing
- battery charge
Battery missing: red LED continuous - battery age and temperature.
Fault: red LED continuous
Battery self-test: green LED flashing
Audible Alarm Battery mode: every 5 seconds
Country/Region Product Variance
Battery low: every 1 second
Standard Product
Battery replace: every 2 seconds MPS12-30 - Micro Power Solution, 12V, 30Watt, Includes
Battery missing: continuous Battery. AC cordset not included.
Fault: continuous
United Kingdom
Physical Specification Weight of unit: 3.5kgs MPS12-30-UK - Micro Power Solution, 12V, 30Watt, Includes Battery
Dimensions H, W, D: 358mm, 120mm, and UK 3pin cordset.
85.6mm
Operating temperature: 0°C to 40°C European Union
MPS12-30-EU - Micro Power Solution, 12V, 30Watt, Includes Battery
Operating humidity: 0% to 90% and Schucko cordset.
Operating elevation: 0 to 3000m
Australia and New Zealand
Certifications MPS12-30-ANZ - Micro Power Solution, 12V, 30Watt, Includes
Battery and Australia/New Zealand cordset.
All products comply with international standards.
Europe: CE North America
MPS12-30-NA - Micro Power Solution, 12V, 30Watt, Includes Battery
and North America cordset.
In the interests of continual product improvement all specifications are subject
to change without notice. Performance ratings are valid with all other variables
at Nominal. Specifications guaranteed over rated operating range.

28 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Inverter Power
EatonSolutions
DC Power Solutions

Matrix™ Modular Inverter

The Eaton® Matrix™ Modular The Matrix Static Transfer
Inverter Solution is an Switch provides automatic and
integrated inverter power instantaneous load transfer
system designed for between mains power and
applications where a very high inverter power and back again,
reliability AC supply is required. to ensure uninterrupted AC
supply to sensitive electronic
The Matrix modular design
equipment.
ensures maximum flexibility to
configure solutions to The Matrix solution uses digital
customers’ requirements. microprocessor control. The
Modules include inverters, monitoring controller gives real-
Static Transfer Switch, time system status through
controller, interface module and comprehensive LCD /LED
Maintenance Bypass Module. displays, and allows program
With its versatile "building settings through the display
block” design and n+x panel.
redundant configuration, the
With the Matrix communication
Matrix ensures reliable
interface module installed, you
telecommunication and
can control and monitor the
industrial AC power.
system remotely.

Ultimate high power density reducing space demand

Hot-pluggable connection allows module addition or removal
without interruption to AC supply
Versatile modular design allows a variety of configurations for
different power needs
Capacity up to 18kVA
n+x redundancy
Single phase 120Vac or 230Vac output options
High efficiency, >89%
Comprehensive LCD/LED display provides system status, and
user-friendly panel eases program settings
Optional maintenance bypass switch with integrated AC
distribution
Optional USB/RS232/RS485 communication for local and
remote management

eaton.com/telecompower 29
 Inverter Power Solutions

Technical Specifications
DC Input Mechanical
Nominal Voltage 48Vdc Inverter Shelf INV-SS-2-1U:
Operating Range 40.5Vdc ~ 58Vdc (HxWxD) 1U x 19” x 330mm (1.75”x19”x13”)
Surge Protection Telcordia GR-1089 CORD, ANSI C62.41-IEEE, STD Weight 2.7kg (6lb)
587-1980 50A STS Shelf INV-STSSS-1U:
Input Protection Reverse polarity protection (HxWxD) 1U x 19” x 330mm (1.75”x19”x 13”)
Weight 2.7kg (6 lb)
AC Output 50A MBS/DU INV-MBSDU-50:
Output Pure sine wave (HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Waveform Weight 7.0kg (15.4lb)
Output power 18kVA (max) 100A STS Shelf INV-STSSS-2U:
Power factor 0.8 (HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Nominal Output 110/115/120Vac Weight 3kg (6.6 lb)
208/220/230/240Vac 100A MBS INV-MBS-100: ‘
Frequency 50/60Hz ±0.5% (HxWxD ) 2U x 19” x 330mm (3.5”x19”x13”)
Crest factor 3:1 Weight 7.0kg (15.4lb)
THD <3%, linear load
<5%, non-linear load Maximum Number of Inverter Modules for Parallel Operation
Efficiency Min 88% at rated load (Max Power)
Overload 1.5*Inom >20s Model Without STS With STS-050 With STS-100
1.25*Inom temperature controlled INV-4810 12 (12kVA) 6 (6kVA) 12 (12kVA)
INV-4810E 12 (12kVA) 12 (12kVA) 12 (12kVA)
Compliance INV-4815 12 (18kVA) 4 (6kVA) 8 (12kVA)
Conducted (AC) EN55022 (Class A)
INV-4815E 12 (18kVA) 8 (12kVA) 12 (18kVA)
Conducted (DC) EN300386
Radiated EN55022 (Class A)
Certifications
Modules All products comply with international standards including CE and UL.
Inverter INV-4810E: 1000VA/800W inverter module
INV-4810: 1000VA/800W inverter module
In the interests of continual product improvement all specifications are
INV-4815E: 1500VA/1200W inverter module subject to change without notice.
INV-4815: 1500VA/1200W inverter module
Static Transfer INV-STS-050: 50A static transfer switch
Switch INV-STS-100: 100A static transfer switch
Controller INV-MC-1000: Controller module
INV-IFC-1000: RS232/USB/RS485 interface module
Shelf INV-SS-2-1U: Chassis for two inverters (1U)
INV-STSSS-1U: Chassis for controller/STS-050 (1U)
INV-STSSS-2U: Chassis for controller/STS-100 (2U)
INV-MBSDU-50: 50A maintenance bypass, power
distribution module (2U)
INV-MBSDU-100: 100A maintenance bypass
module (2U)

30 EATON DC Power Solutions Catalogue

Eaton and Matrix are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
InverterEaton
PowerDC
Solutions
Power Solutions

Matrix™ 2000 Standalone Inverter

The Eaton® Matrix The Matrix 2000 solution uses

Standalone Inverter is designed digital microprocessor control to
Designed for telecom applications for use in telecommunications provide maximum performance
Pure sine wave output applications where a very reliable under all operating conditions.
AC supply is required. The high The built-in controller gives real-
Unity power factor (full 2000 watt output power)
efficiency and compact size makes time system status through
Significant overload capability, 120% continuously, 200% for 5 seconds the Matrix 2000 Inverter an comprehensive LCD/LED displays,
High efficiency, >91% outstanding solution for powering and allows program setting
all types of critical AC equipment. through a keypad panel.
High power density
Built in Static Transfer Switch (STS) The Matrix 2000 Standalone
Inverter provides 2000W of
DSP design for improved reliability and performance reliable AC power in a 1U x 19”
Single phase 120Vac or 230Vac output options rack mount package that includes
Comprehensive LCD/LED with keypad a built-in Static Transfer Switch
(STS). The STS automatically and
Wide selection of configurable parameters. instantaneously switches the AC
International certifications output, from the DC inverter to an
alternative source such as AC
mains (and back again), providing
extra security of the AC supply to
the load equipment.

eaton.com/telecompower 31
 Inverter Power Solutions

Technical Specifications
DC Input Certifications
Operating Range 48V: 40Vdc ~ 60Vdc All products comply with international standards.

Safety EN60950-1 / UL60950-1

AC Input (to Transfer Switch) Europe CE

Voltage Range: INV-4820SA: 89Vac to 138Vac
(50/60Hz) INV-4820ESA: 176Vac to 276Vac In the interests of continual product improvement all specifications are subject to
Transfer Time <10ms change without notice.

AC Output
Power Output 2000VA / 2000W
Wave Form Pure sine wave
Power Factor 1.0
Nominal Output INV-4820SA: 110/115/120Vac
Voltage INV-4820ESA: 208/220/230/240Vac
(selectable)
Output 50,60Hz
Frequency
Efficiency >91% at rated load
Over Load 2*Inom, 5sec max
Protection 1.5*Inom, 10sec max
1.25*Inom, temperature controlled

Environmental
Requirements
Operating -20°C to 60°C (-4°F to 140°F)
Temperature -20°C to 50 °C (-4°F to 122°F), full performance
Range
Cooling Fan Cooled

32 EATON DC Power Solutions Catalogue

Eaton, Matrix, CellSure, SiteSure, DCTools
and PowerManager are trade names,
trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates.
All other trademarks are property of their
Inverter PowerDC
Eaton Solutions
Power Solutions

TelecomInverter
Telecom InverterSolution
Solution
The Eaton Telecom Inverter is smoothed and isolated AC
an innovative dual input inverter power to the load. In “Battery
solution designed for Mode”, the inverter draws
applications where very high power from the DC input. When
reliability of your AC supply is power to the preferred input is
required. By incorporating a interrupted; the Inverters
230Vac input, as well as the seamlessly switch to the
48Vdc input, Eaton has alternative input with no
developed a solution that closes interruption of power to your
the gap between the traditional critical AC loads.
UPS and conventional inverter
The Eaton Telecom Inverter
solutions.
solutions can be configured
The innovative architecture with an optional controller
allows users to provide clean, module and/or Maintenance
regulated and continuous AC Bypass Switch. The monitoring
power to critical loads with the controller gives real-time
same n+x reliability as system status through
traditional DC power systems. comprehensive LCD /LED
The design of the inverter displays, and allows system
ensures a seamless transfer parameter setting through the
between the AC and DC inputs, keypad panel. The
giving zero transfer time and communication interface allows
eliminating the need for a Static users to monitor and control the
Transfer Switch. system remotely.
Users can select between An optional Maintenance
“Line Mode” and “Battery Bypass Switch lets users
Mode”. In Line Mode, the manually switch the loads
inverter operates similar to a between inverter power and AC
double conversion UPS, mains, allowing for complete
drawing power from the AC shutdown of the inverter
mains, and delivering system while still maintaining
mains power to the loads.

Features
Pure sine wave output
AC and DC inputs
High efficiency, >94% in line mode
Up to 28kVA single phase output
120% overload capacity @ 30
Modular n+x design
No single point of failure
Zero transfer time

Optional LCD display + keypad with

ROHS compliance

eaton.com/telecompower 33
 Inverter Power Solutions

Technical
Brief Specifications
Technical Specification
DC Input Certifications
Operating 48V: 40Vdc ~ 60Vdc All products comply with international standards.
Range
Safety EN60950-1 / UL60950-1
Europe CE

AC Input In the interests of continual product improvement all specifications are

Voltage Range: 185Vac - 265Vac subject to change without notice.
(50/60Hz)
Transfer Time zero

AC Output
Power Output 3500VA / 2800W
(inverter Part Numbers
module) INV-4835E Eaton, Dual Input Inverter module. 48Vdc
Maximum 28kVA / 22.4kW input, 230Vac Input, 230Vac output. 3.5kVA
System Power INV-SS-8 Inverter Shelf for 8 x INV-4835E. 8U x 19”
Output INV-MC-2000 Controller for Dual Input Inverter systems
(8 Inverters) (requires controller shelf)
Wave Form Pure sine wave INV-MCSS-1U Controller Shelf for Dual Input Inverter
Power Factor 0.8 systems. 1U x 19”
Nominal Output 208/220/230/240Vac INV-MBS-125 125A Maintenance Bypass Switch for Dual
Voltage Input Inverter systems. 3U x 19”
(selectable)
Output 50/60Hz
Frequency
Efficiency >94% AC Input
>91% DC Input
Over Load 1.5*Inom, 10sec max
Protection 1.2*Inom, temperature controlled

Environmental
Requirements
Operating -20°C to 60°C (-4°F to 140°F)
Temperature -20°C to 50 °C (-4°F to 122°F), full performance
Range
Cooling

34 EATON DC Power Solutions Catalogue Eaton, Matrix, CellSure, SiteSure,

DCTools and PowerManager are trade
names, trademarks, and/or service marks
of Eaton Corporation or its subsidiaries
and affiliates. All other trademarks are
property of their respective owners.
Software and Communications
Eaton DC Power Solutions

PowerManagerII™Control
PowerManagerII™ Control and
and
Monitoring
MonitoringSoftware
Software
The Eaton® PowerManagerII Remote Control and
software provides effective
remote management for Eaton
Monitoring
DC power systems. The PowerManagerII can control
intuitive, Windows® - based and monitor power equipment
graphical user interface enables at multiple sites from one
you to quickly ‘zoom in’ and central location. It provides real-
view concise summary time graphical displays of
information, or specific control system operating conditions,
functions, key operational data, and monitors all system
or alarm details. functions including individual
rectifier modules.
PowerManagerII is cost-
effective. Remote management Event Logs and Data Logs
can reduce operating and
maintenance costs. The latest PowerManagerII lists data from
power system information is each site. This includes all
available where and when you alarms, with activation details.
Features want it, greatly reducing the Historical data can be recorded
Windows® based graphical need for site visits. Alarms are for fault analysis and preparation
user interface highlighted and detailed, to help of maintenance schedules. The
you analyse faults and produce information can be filtered,
Real-time monitoring
maintenance histories and sorted or exported to other
Automatic alarm indication schedules. applications.
Alarm and activity logging PowerManagerII is Customisation
On-line access to system comprehensive. You can
control functions connect as many power PowerManagerII is designed for
Reduces the need for site systems as you like, and all easy customisation. Maps and
visits necessary data is clearly locations of the sites can be
presented. PowerManagerII is added to the PowerManagerII
International language flexible. You can set up area interface.
options map views of urban areas and
In addition to Eaton DC Power
User configurable wider regions, to help you
Systems, air-conditioning
navigation maps visually navigate to any site -
equipment and intruder alarms
Remote battery testing the choices are yours. And it’s
and other plant connected to
simple to add new maps and
the system Supervisory Module
site locations.
I/O connections, can also be
monitored.
With the SiteManager option,
PowerManagerII can monitor a
wide range of inputs using
SiteSure modules.

eaton.com/telecompower 35
 Software and Communications

Technical Specifications
Control
Functions Data Networks
PowerManagerII includes graphical displays of all system control The Eaton Customer Services Team offers a complete installation and
processes. All parameters are displayed together with real-time software customization service, and can provide advice on integration
displays of the system operating conditions: of PowerManagerII into existing data networks.
System Displays operating conditions and system status.
schematic Computer
Individual rectifier PowerManagerII monitors individual rectifier Minimum
performance. Requirements
System summary Graphical real-time display of system status. Operating Windows XP, Windows 7 or Windows Server 2008
System control Display of output voltage control systems. System
functions Ram 2GB
Temperature Set temperature compensation parameters for
Compensation optimum battery charging.
Manual Equalize Initiate battery equalize charge.
Protocols SNMP (Can emit traps)
Periodic Equalize Set the duration and level of auto battery equalize S3P three layer protocol
charges.
Interfaces RS232, RS485, Ethernet, TCP/IP, modem
Fast Charge Set-up fast battery recharge parameters for
optimum system recovery after AC outage.
Low Voltage Set the operational parameters of the low voltage User
Disconnect disconnect module. Configurable
Graphics
Battery Current Set the maximum battery recharge current.
Format Windows bitmap format (.BMP), or Windows
Limit
Metafile (.WMF) file formats supported
Battery Test Conduct on-line battery tests to determine battery
condition.
Discharge Test Calibrates the Battery Capacity remaining
algorithm. In the interests of continual product improvement all specifications are
subject to change without notice.

36 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Software andDC
Eaton Communications
Power Solutions

DCTools™Configuration
DCTools™ Configuration Software
Software

Eaton® DCTools is configuration DCTools is the ideal setup and

software for field technicians diagnostic tool for field
installing and maintaining Eaton technicians. It provides a very easy
DC power systems. It is supplied at way for them to configure an
no charge by download from the Eaton DC product, and view status
Internet and simplifies the setup and alarm conditions.
and operation of all Eaton DC
Among the advantages of using
power systems.
DCTools are reduced installation
Frontline staff will find DCTools is times, lower fault response times,
a major benefit during the less need to visit sites and better
installation, troubleshooting and access to operating data for fault
support of any Eaton DC power analysis and operating conditions
system, CellSure battery such as load growth.
monitoring systems and SiteSure
These make the processes of
ancillary monitoring and control
power system installation and
systems.
operation more efficient with the
For added flexibility DCTools can potential for real operating cost
connect to an Eaton DC power savings.
system in several ways:; directly
DCTools is available for download
through a USB connection to an
at http://dcpower.eaton.com/dc
SC200 Controller, Ethernet
products.asp
LAN/WAN, RS232 serial
connection; or through a dialup or
cellular modem.

Features
DC power system configuration software
Windows® compatible
Easy to use graphical display
Operates with all Eaton DC power systems, CellSure™ and
SiteSure™
Local (USB, RS232 serial) or remote (or Ethernet or dialup
modem) connection
Downloadable from the Internet at no charge

eaton.com/telecompower 37
 Software and Communications

Technical Specifications
Computer
Minimum
Requirements
Operating Windows XP, Window 7
System
RAM 1GB

Internet Required for download only

connection

Interfaces
Communications Ethernet, USB, RS232, or modem
interfaces
supported

Availability
Free download http://dcpower.eaton.com/dc products.asp

In the interests of continual product improvement all specifications are

subject to change without notice.

38 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates.
All other trademarks are property of their
Rectifier Modules
Eaton DC Power Solutions

APR24-3GAccess
APR24-3G Rectifier Module
Power Rectifier
The Eaton® APR24-3G Access Designed for operation at up to
Power Rectifier is the 24V 70°C (158°F) and under a wide
series of rectifier modules range of AC power conditions,
designed specifically for the APR24-3G is perfectly
telecom access networks and suited to the demanding
light industrial applications such environments found in network
as cellular base stations, radio access applications.
trunk networks and SCADA
With up to 90% efficiency,
systems. The APR24-3G is also
suitable for NiCad battery optimum performance at typical
load currents, and power factor
applications.
correction the APR24-3G has
The new generation 3G some of the lowest running
architecture is reliable, power costs for any 24V DC power
dense and compact. The high system of its type available.
power density allows as little as
1U of rack space to be The APR24-3G is designed to
operate with the Eaton SC100
occupied by power, therefore,
maximizing space available for and SC200 system controllers
in any of the versatile Access
telecom equipment.
Power Solutions and provide
The APR24-3G rectifier years of cost-effective and
incorporates a combination of trouble-free service for your
leading-edge high frequency network access equipment.
switch mode technology for a
flexible and efficient DC power
source, with high reliability fan
cooling which further
contributes to its high overall
reliability.

Features
Fast on-line expansion of rectifiers (hot-swap)
Automatic set-up from system controller
Intelligent microprocessor controlled
High power density
High efficiency and unity power factor
Wide AC supply conditions
Wide output voltage ranges
Constant current output
NiCad battery compatible
Compliance with international standards

eaton.com/telecompower 39
 Rectifier Modules

Technical Specifications
Input
AC Supply 220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
Power Factor >0.98 (50 – 100% Output Current)
Efficiency 89% (50 – 100% Output Current)

Output
DC Output 24V: 20 – 32V
Voltage Range
DC Output Constant power 1440W, 28.8 - 32V
(maximum) Constant current 50A, 20 - 28.8V

Environmental
Operating -40°C – +70°C [-40°F – +158°F]
Temperature Output current is derated above 50°C [122°F] and
Range below -10°C [14°F]
Cooling Temperature controlled, high reliability fans

Mechanical
Dimensions 3U: 133mm [5.25”], 42mm [1.65”],
H,W,D 266mm [10.45”] overall
Weight 1.7kg [3.7 lb]

Certifications
North America UL, FCC Verification, CSA, IC
Europe CE
Australia / C-tick, Telepermit
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice. Performance ratings are valid with all
other variables at Nominal. Specifications guaranteed over rated operating
range.

40 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Rectifier Modules
Eaton DC Power Solutions

APR48-3GAccess
APR48-3G Rectifier Module
Power Rectifier
The Eaton® APR48-3G Access These features make the
Power Rectifiers are designed APR48-3G perfectly suited to
specifically for network access the wide variety of equipment
applications such as cellular and demanding environmental
base stations, customer conditions found in network
premises equipment and road- access applications.
side cabinet installations.
The APR48-3G also has power
The new generation 3G factor correction and is up to
architecture is reliable, power 92% efficient, with optimum
dense and compact. The high performance available at typical
power density allows as little as load currents. Together these
1U of rack space to be give the APR48-3G some of the
occupied by power, therefore, lowest running costs for any
maximizing space available for DC powersystem of its type
telco equipment. available.
The APR48-3G rectifier incor- Operating with the Eaton
porates a combination of lead- SC100 or SC200 system con-
ing-edge high frequency switch troller, the APR48-3G rectifier
mode technology for a flexible modules will provide years of
and efficient DC power source, cost-effective, and trouble free
with high reliability fan cooling service for your 48V network
which further contributes to its access equipment.
high overall reliability.
The APR48-3G is a high pow-
ered rectifier with 1800W
output. It is designed for op-
eration at up to 70°C (158°F)
and under a wide range of AC
power conditions.

Features
Fast on-line expansion of rectifiers (hot-swap)
Automatic set-up from system controller
Intelligent microprocessor controlled
Industry leading power density
High efficiency and unity power factor
Wide AC supply conditions
Wide output voltage ranges
Constant power output
Compliance with international standards

eaton.com/telecompower 41
 Rectifier Modules

Technical Specifications
Input
AC Supply 220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
Power Factor >0.99 (50 – 100% Output Current)
Efficiency 92% (50 – 100% Output Current)

Output
DC Output 48V: 43 – 57.5V
Voltage Range
DC Output 1800W @ 48V
(maximum)

Environmental
Operating -40°C – +70°C [-40°F – +158°F]
Temperature Output current is derated above 50°C [122°F] and
Range below -10°C [14°F]
Cooling Temperature controlled, high reliability fans

Mechanical
Dimensions 3U: 133mm [5.25”], 42mm [1.65”],
H,W,D 266mm [10.45”] overall
Weight 1.7kg [3.7 lb]

Certifications
North America UL, FCC Verification, CSA, IC
Europe CE
Australia / C-tick, Telepermit
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice. Performance ratings are valid with all
other variables at Nominal. Specifications guaranteed over rated operating
range.

42 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
munications network options makes the Energy
ators who are striving to Saver Rectifier well suited to
nergy costs across the limited space applications such
ork, and/or to meet as ETSI and road side cabinets.
essive carbon footprint
The Energy Saver Rectifier is
ction targets.
fully compatible with existing
ating with well Rectifier
over 96% Modules
Eaton 3G systems and it is one
of theDC
ency, it produces at leastEaton Power
easiest Solutions
rectifiers to use,
less waste energy than with a simple plug-and-go

APR48-ESAccess
APR48-ES Energy Saver
Power Rectifier
Energy
other modern rectifiers, insertion. It operates under a
with potentially greater wide range of AC power
gs over older conditions and in temperatures
tructure. at up to 70°C (158°F).
2kW Energy Saver Rectifier
ideal module size for
ering access applications
Saver Rectifier
n a telecom network such The Eaton® APR48-ES Energy The high power density, short
llular base stations, ADSL Saver Rectifier is designed for depth and flexible mounting
ment, and fibre nodes. communications network options makes the Energy
operators who are striving to Saver Rectifier well suited to
ectifier features intelligent cut energy costs across the limited space applications such
l signal processing for network, and/or to meet as ETSI and road side cabinets.
nced control, producing aggressive carbon footprint
efficiency in excess of The Energy Saver Rectifier is
reduction targets.
for typical operating loads, fully compatible with existing
also maintaining a very Operating with well over 96% Eaton 3G systems and it is one
minimum operating efficiency, it produces at least of the easiest rectifiers to use,
ency of 95 to 96%, over a 50% less waste energy than with a simple plug-and-go
wide range of loads (from most other modern rectifiers, insertion. It operates under a
to 100% of the 2kW and with potentially greater wide range of AC power
city). savings over older conditions and in temperatures
infrastructure. at up to 70°C (158°F).
The 2kW Energy Saver Rectifier
is the ideal module size for
ures powering access applications
000W output power within a telecom network such
as cellular base stations, ADSL
nergy saving efficiency greater than 96% equipment, and fibre nodes.
Wide efficiency curve
This rectifier features intelligent
ndustry leading power density digital signal processing for
ast on-line expansion of rectifiers (hot-swap) enhanced control, producing
imple ‘plug and go’ insert peak efficiency in excess of
96% for typical operating loads,
nity power factor
while also maintaining a very
igital signal processing for enhanced control high minimum operating
Wide AC supply conditions efficiency of 95 to 96%, over a
very wide range of loads (from
Wide output voltage range
30% to 100% of the 2kW
onstant power output capacity).
ompliance with international standards

Features
2000W output power
Energy saving efficiency greater than 96%
Wide efficiency curve
Industry leading power density
Fast on-line expansion of rectifiers (hot-swap)
Simple ‘plug and go’ insert
Unity power factor
Digital signal processing for enhanced control
Wide AC supply conditions
Wide output voltage range
Constant power output
Compliance with international standards

eaton.com/telecompower 43
 Rectifier Modules

Technical Specifications
Input
AC Supply 120V/208-240V, 50/60Hz (nominal)
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
Power Factor >0.99 (50 – 100% output current)
Efficiency >96% peak
>95% (20 – 100% output power)

Output
DC Output
Voltage Range 43 – 57.5V
DC Output
(maximum) 2000W @ 48V

Environmental
Operating
Temperature -40°C – +70°C [-40°F – +158°F]
Range Output power derates above 50°C [122°F]
Cooling Temperature controlled, variable speed, high
reliability fan <50dBA ambient temperature 25°C

Mechanical
Dimensions 3U: 133mm [5.25”], 42mm [1.65”],
H,W,D 266mm [10.45”] overall
Weight 1.7kg [3.7 lb]

Certifications
North America UL, FCC Verification, CSA, IC
Europe CE

In the interests of continual product improvement all specifications are

subject to change without notice. Performance ratings are valid with all
other variables at Nominal.

44 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
munications network options makes the Energy
ators who are striving to Saver Rectifier well suited to
nergy costs across the limited space applications such
ork, and/or to meet as ETSI and road side cabinets.
essive carbon footprint
The Energy Saver Rectifier is
ction targets.
fully compatible with existing
ating with well Rectifier
over 96% Modules
Eaton 3G systems and it is one
ency, it produces at leastEaton DC
of the Power
easiest Solutions
rectifiers to use,
less waste energy than with a simple plug-and-go

NPR48-ESEnergy
NPR48-ES EnergySaver
Saver Rectifier
Rectifier
other modern rectifiers, insertion. It operates under a
with potentially greater wide range of AC power
gs over older conditions and in temperatures
tructure. at up to 70°C (158°F).
2kW Energy Saver Rectifier
ideal module size for
ering access applications
n a telecom network such The Eaton® NPR48-ES Energy The high power density, short
llular base stations, ADSL Saver Rectifier is designed for depth and flexible mounting
ment, and fibre nodes. communications network options makes the Energy
operators who are striving to Saver Rectifier well suited to
ectifier features intelligent cut energy costs across the limited space applications such
l signal processing for network, and/or to meet as ETSI and road side cabinets.
nced control, producing aggressive carbon footprint
efficiency in excess of The Energy Saver Rectifier is
reduction targets.
for typical operating loads, fully compatible with the
also maintaining a very Operating with well over 96% existing Eaton SC200 system
minimum operating efficiency, it produces at least controller and it is one of the
ency of 95 to 96%, over a 50% less waste energy than easiest rectifiers to use, with a
wide range of loads (from most other modern rectifiers, simple plug-and-go insertion. It
to 100% of the 2kW and with potentially greater operates under a wide range of
city). savings over older AC power conditions and in
infrastructure. temperatures at up to 70°C
(158°F).
The NPR48-ES Energy Saver
Rectifier harnesses the
ures technology of the APR48-ES
000W output power 2kW rectifier to offer a
powerful 3kW of output power.
nergy saving efficiency greater than 96%
Wide efficiency curve This rectifier features intelligent
digital signal processing for
ndustry leading power density enhanced control, producing
ast on-line expansion of rectifiers (hot-swap) peak efficiency in excess of
imple ‘plug and go’ insert 96% for typical operating loads,
while also maintaining a very
nity power factor
high minimum operating
igital signal processing for enhanced control efficiency of 95 to 96%, over a
Wide AC supply conditions very wide range of loads.
Wide output voltage range
onstant power output
ompliance with international standards

Features
3000W output power
Energy saving efficiency greater than 96%
Wide efficiency curve
Industry leading power density
Fast on-line expansion of rectifiers (hot-swap)
Simple ‘plug and go’ insert
Unity power factor
Digital signal processing for enhanced control
Wide AC supply conditions
Wide output voltage range
Constant power output
Compliance with international standards

eaton.com/telecompower 45
 Rectifier Modules

Technical Specifications
Input
AC Supply 120V/208-240V, 50/60Hz (nominal)
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
Power Factor >0.99 (50 – 100% output current)
Efficiency >96% peak
>95% (20 – 100% output power)

Output
DC Output
Voltage Range 43.2 – 57.5V
DC Output
(maximum) 3000W, 60Amp at 50V

Environmental
Operating
Temperature -40°C – +70°C [-40°F – +158°F]
Range Output power derates above 50°C [122°F]
Cooling Temperature controlled, variable speed, high
reliability fan <50dBA ambient temperature 25 C

Mechanical
Dimensions 3U: 130mm [5.1”], 63mm [2.5”],
H,W,D 266mm [10.5”] overall
Weight 2.3kg [5.1 lb]

Certifications
Europe CE

In the interests of continual product improvement all specifications are

subject to change without notice. Performance ratings are valid with all
other variables at Nominal.

46 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Rectifier Modules
Eaton DC Power Solutions

CR48-3G Rectifier
CR48-3G Core PowerModule
Rectifier
The Eaton® CR48-3G Core The CR48-3G also has power
Network Rectifiers are factor correction and is up to
designed specifically for core 92% efficient, with optimum
network applications such performance available at typical
central office and data centres. load currents. Together these
give the CR48-3G some of the
The new generation 3G
lowest running costs for any
architecture of the CR48-3G DC power system of its type
rectifier has improved space
available.
utilisation so rack space can be
maximised for use with telco These features make the CR48-
equipment and not power 3G ideally suited to central
equipment. office and data center
applications that require the
The combination of industry highest level of performance
leading power density and high
and reliability from the DC
frequency switch mode power system.
technology with high reliability
fan cooling makes the CR48-3G Operating with the Eaton
a flexible, efficient, and very SC200 system controller, the
highly reliable DC power CR48-3G rectifier modules will
source. provide years of cost-effective,
and trouble free service for your
The CR48-3G is a very high core 48V network equipment.
powered rectifier with 5800W
output, it is designed for
operation at up to 70°C (158°F)
and under a wide range of AC
power conditions.

Features
Fast on-line expansion of rectifiers (hot-swap)
Automatic set-up from system controller
Intelligent microprocessor controlled
Industry leading power density
High efficiency and unity power factor
3Ø AC supply
Wide AC supply conditions
Wide output voltage ranges
Constant power output
Compliance with international standards

eaton.com/telecompower 47
 Rectifier Modules

Technical Specifications
Input
AC Supply 208V, 50/60Hz (nominal) 3-phase
400V, 50/60Hz (nominal) 3-phase Y
323-510V full output power up to 50°C [122°F]
Power Factor >0.99 (50 – 100% Output Current)
Efficiency 92% (50 – 100% Output Current)

Output
DC Output 43 – 58V
Voltage Range
DC Output 5800W @ 48V
(maximum)

Environmental
Operating -40°C – +70°C [-40°F – +158°F]
Temperature Output current is derated above 50°C [122°F] and
Range below -10°C [14°F]
Cooling Temperature controlled, high reliability fan

Mechanical
Dimensions 3U: 130mm [5.25”], 121mm [4.8”],
H,W,D 321mm [12.6”] overall
Weight 4.4kg [9.7 lb]

Certifications
North America UL, FCC Verification, CSA, IC
Europe CE
Australia / C-tick, Telepermit
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice.

48 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
ControlEaton
and Monitoring
DC Power Solutions

ASC48-ESSolar
ASC48-ES SolarCharger
Charger
The Eaton® ASC48-ES Solar The ASC48-ES combines with
Charger is designed for the Eaton SC200 controller to
communications network provide a fully managed
operators who are striving to solution.
cut energy costs across the
network, and/or to meet Full monitoring includes energy
aggressive carbon footprint metering and logging on input
reduction targets. and output.
It includes a high-performance The ASC48-ES is fully
Maximum Power Point Tracking compatible with existing Eaton
(MPPT) function to extract 3G systems, such as the APS3
more than 99.9% of available and APS6 systems. The output
power from the solar panels. may be paralleled with one or
more APR48-ES rectifiers to
Combined with efficiency of produce a versatile power
above 96%, it ensures that the solution for both AC or
maximum power is available to generator power and solar
charge batteries and run load power.
under all conditions.
This makes it an ideal solution
An ASC48-ES may be for a fully integrated solar /
connected to one or more diesel hybrid solution, or an AC
strings of parallel solar panels. powered system with solar
Several ASC48-ES chargers, added to reduce energy
each with its own solar panels, consumption.
may be operated in parallel. Intelligent control in the SC200
This solar charger features allows optimal balance of solar
intelligent digital signal energy and backup fuel.
processing for enhanced The solar charger is protected
control, producing peak against input over-voltage,
efficiency in excess of 96% for surges and over-temperature. It
typical operating loads, while is rated for operation in
also maintaining a very high temperatures at up to 70°C
minimum operating efficiency (158°F).
of 95 to 96%, over a very wide
range of loads (from 30% to
100% of the 2kW capacity).

Features
2000W output power
MPPT extracts above 99% of available energy
Energy saving efficiency greater than 96%
Wide efficiency curve
Industry leading power density
Fast on-line expansion of rectifiers (hot-swap)
Simple ‘plug and go’ insert
Digital signal processing for enhanced control
Wide input voltage range
Wide output voltage range
Compliant with international standards

eaton.com/telecompower 49
 Control and Monitoring

Technical Specifications
Input
Input voltage 100 V DC to 300V DC nominal
range Maximum open circuit voltage 380 V DC
Absolute maximum input voltage 400V DC
Maximum Uses more than 99.9% of available power
power point
tracking
Efficiency >96% peak
>95% (30 – 100% output power)

Output
DC Output
Voltage Range 43 – 57.5V
DC Output
(maximum) 2000W @ 48V / 185V to 300V input
1150W at 120V input

Parallel
operation
Output Up to 4 chargers may be connected in parallel to
the DC bus
Input Not supported (each ASC48-ES must be connected
to separate string(s) of solar panels)

Environmental
Operating
Temperature -40°C – +70°C [-40°F – +158°F]
Range Output power derates above 50°C [122°F]
Cooling Temperature controlled, variable speed, high
reliability fan

Mechanical
Dimensions 3U: 133mm [5.25”], 42mm [1.65”],
H,W,D 266mm [10.45”] overall
Weight 1.7kg [3.7 lb]

Certifications
Europe CE
Australia /
New Zealand RCM

In the interests of continual product improvement all specifications are

subject to change without notice. Performance ratings are valid with all
other variables at Nominal.

50 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
Control and Monitoring
DC Power Solutions

SC200 System Controller

The application, ensuring fast and
is an advanced problem free installation. On-
control and monitoring solution site changes are easily made
for Eaton Enterprise, Access, from the front panel or with a
Metro and Core Power Windows PC using DCTools
Solutions. configuration software.
It provides a full suite of The high-resolution color LCD
advanced communications display is easy to read and has
options, including built-in an easy to use menu structure.
Ethernet interface, Web server, All system values and alarms
and SNMP agent. can be displayed, with easy
keypad access to check or edit
Alarm notifications may be by
settings.
SNMP traps, email, SMS, dial-
out to PowerManagerII remote The SC200 works with separate
monitoring software, or relay system I/O boards for powerful
contact closures. and user-friendly interfacing.
Easy, low cost I/O expansion is
An intelligent “Smart Alarms”
possible by adding additional
feature provides highly
I/O boards.
configurable control and alarms
to automated site management
and improve performance – e.g.
disconnect loads during peak 24V & 48V power systems
AC grid loading, run outdoor Wireless cell sites &
cabinets in low noise mode at switches
night, manage cooling, or
Transmission terminals
customise site alarms to
network requirements. Local & central office
switching
The SC200 provides full
generator control and fuel
metering capability for off-grid, External GSM or PSTN
hybrid generator, battery, solar modem
and wind applications.
Additional I/O boards for
The SC200 is supplied system expansion
preconfigured with a default SiteSure-3G modules for
configuration file, or factory site management
customized for a particular

Ethernet interface built-in

SNMP agent V1, V2c, V3
Battery mid-point monitoring & discharge time remaining
Generator control & fuel metering
Alternative energy input metering
SMS & email alarm messages (with GSM modem)
Comprehensive system control functions
Complies with international standards
Setup via web, keypad or DCTools configuration software
Language options
Optional extra I/O boards or SiteSure-3G modules for
expansion
Smart alarms
Modbus
eaton.com/telecompower 51
 Control and Monitoring

Technical Specifications
Supply Voltage 18 to 60Vdc Input/Output With IOBSS module (SiteSure-3G):
Range Analog inputs: 48
Operating Range Standard: -10 to +50°C [14 to 122 °F] Digital inputs: 108
Extended: -25 to 70°C [-13 to 158 °F] Digital outputs: 32
Modem PSTN or GSM. Requires external modem.
communications

Analog inputs Current sensor (3), Bus voltage (1), Temperature

(2) China MII
Digital inputs 4 Internal (pre-defined), 6 external (user-defined) North America UL, FCC Verification, IC
LVD contactor 2 with one IOBGP module Europe CE
outputs Up to 16 with additional IOBGP modules Australia / C-tick
Relay outputs 6 Voltage free, NO-C-NC, 0.1A @ 60VDC New Zealand
Screwless terminal block, 0.5mm2 - 2.0mm2
conductors In the interests of continual product improvement all specifications are
subject to change without notice.

Physical Ethernet, USB and RS232

Software IP, http, https (secure web), S3P, Modbus, SMTP
(email)
Management DCTools configuration / local management
software software.
PowerManagerII remote management software.
SNMP version V1, V2c or V3. Supports standard
Network Management System software including
HP OpenView Network Node Manager.

Display Back-lit color dot matrix LCD 160 x 128 pixel

Adjustable viewing angle
Keypad 6 keys
Language English: Standard
Options Spanish, German and Chinese available on
request.
Other language software upgrades by
arrangement.
Indicators Power on, Critical/Major alarm, Minor alarm

Dimensions SC200: 133.5mm (3U), 44.5mm, 70mm

H,W,D IOBGP: 106mm, 175mm, 18mm
Mounting SC200: rectifier slot or flush panel mount
Orientation: vertical or horizontal
IOBGP: panel mount

Event Log 10,000 records

Data Log 10,000 records

Eaton, CellSure, SiteSure, DCTools and

52 EATON DC Power Solutions Catalogue PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
 ControlEaton
and Monitoring
DC Power Solutions

CellSure™Battery
CellSure™ BatteryMonitoring
Monitoring and
and
Fault
FaultDiagnosis
Diagnosis

Features When there’s a power failure Now there’s the Eaton®

there is only one thing between CellSure battery monitoring and
Early warning of potential failures your network never missing a fault diagnosis system.
Reserve Time remaining on Discharge beat and an outage – the
CellSure provides a method to
battery. Batteries tend to be the
Accurate battery capacity and state-of-health measurements report on batteries, showing
forgotten safety net. Rarely
Patented software algorithm where problems may occur and
needed, they sit quietly waiting
giving the most important
Cost effective for network wide deployment to do their job.
information - reliable battery
Remote communications options However, when they are called capacity measurements in real
Graphical data displays to action will they be ready? time.
Data export capability A battery monitoring system is
Real-time monitoring and alarms the best way to keep track of a
battery’s condition and to
Modular and expandable
highlight ahead of time if any
Easy to install and operate maintenance is needed.
Remote Battery Testing (with PowerManagerII™ software)
But until now the hardware
requirements, and the need for
regular site visits to setup and
run a monitoring system, have
made this an expensive option.

eaton.com/telecompower 53
 Control and Monitoring

Technical Specifications
System
configurations
Nominal system 24V or 48V
voltages
Battery strings 1-4 strings
per system
Cell/monobloc 2V, 6V or 12V
voltage
Battery types VRLA (standard) or flooded cells (on request)

Alarms and
Indicators
Controller Status LED, 4 String Alarm LEDs
module
indicators
Controller Voltage free relay contacts (Urgent and Non-urgent)
module alarms

Inputs
Cell/monobloc ±0.5% accuracy
voltage
String current ±1% accuracy
Ambient ±1°C accuracy
temperature
String ±1°C accuracy
temperature

Data Output
Alarm Cell/monobloc voltage low, Cell/monobloc
conditions divergence, Discharge voltage low, String
temperature, String overcharge, Low capacity, Low
charge.
Measured Actual capacity, Reserve charge, Reserve time,
values “State of Health”
Data Weekly log: 7day x 24hour cell/monobloc data
Yearly log: 365day cell/monobloc data (averaged)
Last two partial discharges.
Last full discharge.

Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:
North America UL, FCC Verification
Canada IC
Europe CE
Australia / C-tick
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice.

54 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Control and Monitoring
Eaton DC Power Solutions

SiteSure-3G™
SiteSure-3G™

The Eaton® SiteSure-3G adds SiteSure-3G modules can be

on to the SC200 Controller to remotely controlled and
provide control and monitoring configured using the
of a wide range of external PowerManagerII remote control
devices. It uses the communi- and monitoring software or
cations capability of an Eaton with DCTools local craft
DC power system to monitor terminal.
and control security, air
conditioning, engine alternators SiteSure-3G is also compatible
with Network Management
and other building services, or
sense DC currents for load Systems using SNMP.
metering.
Additional SiteSure-3G modules
can be added as required to
provide the number of inputs
and outputs needed for a
particular application.

Features
Remote control and monitoring
Expandable
Modular
Real time data collection
Compliance with international standards

eaton.com/telecompower 55
 Control and Monitoring

Technical Specifications
Operation
Supply Voltage 19 to 60V
Range
Rated Operating -10°C to +80°C [+14°F to +176°F]
Range

Input/Output
Bus voltage Number: 1
input Range: -60V to +60V
Current inputs Number: 3
Range: -50mV to +50mV
Temperature Number: 2
inputs Range: 2.53V to 3.23V
(-20°C to +70°C with TS02 temperature sensor)
Digital inputs Number: 10
General Number: 4
purpose analog Range: 0V to +10V
inputs
Digital Outputs Number: 6
(Relays) Type: Voltage free, NO-C-NC
0.3A @ 60VDC / 1A @ 30VDC

Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions
available with these safety and EMC approvals:

North America UL, FCC Verification, IC

Europe CE
Australia / C-tick
New Zealand

In the interests of continual product improvement all specifications are

subject to change without notice.

56 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
 Outdoor Enclosures
Eaton DC Power Solutions

WhisperCabinet™
Whisper Cabinet™Roadside
Roadside
Telecom
TelecomEquipment
Equipment Enclosures
Enclosures

Single Bay and Double Bay

Features The Eaton Whisper series of The cabinets are cooled by a

outdoor telecommunications powerful air to air heat
Whisper quiet operation – to minimize neighborhood noise cabinets is a versatile and exchanger system with the
pollution compact range of solutions for ability to dissipate up to 1300W
Air to air heat-exchangers – giving 1300W heat dissipation with DC power, battery backup, of heat. This uses temperature-
only 10°C internal temperature rise equipment mounting, and controlled DC fans for lowest
copper termination. energy use and lowest possible
Variable speed DC fans – lowest noise, highest efficiency, and
Double-skinned marine grade noise. The cabinet is fully NES-
operation under mains fail
aluminium construction compliant.
Removable fan plates – to simplify servicing provides the highest level of
All cabinets are fully monitored
19”, 21” or 23” standard equipment bay mounting - for flexibility equipment protection along with remote communications
with long life and zero
Single or double equipment bays – more room for revenue and control options.
maintenance for the cabinet.
generating equipment
Batteries are mounted in a
Double skin design, cabinet within a cabinet – to fully protect your separate compartment for ease
electronics of access.
Graffiti resistant paint – aids cleaning and against vandal impact The Single Bay Whisper has
mounting space for up to 27U
Three point locks – secure locks to resist tampering
of 19 inch equipment, while the
Marine grade aluminum – ensures long life and corrosion Double Bay Whisper adds
resistance another 27U of mounting
Galvanized steel plinth – for secure and simplified installation space.
MDF options are available for
Separate MDF chamber – enables contractor maintenance access
copper termination.
Large battery compartment – for high power loads and longer
battery reserve times
High seismic withstand capability – for reliability in adversity

eaton.com/telecompower 57
 Outdoor Enclosures

Technical Specifications
Dimensions
(H, W, D)
Overall Single bay: 1500mm x 1650mm x 600mm
Double bay: 1500mm x 2240mm x 600mm
Equipment bay(s) 1330mm x 660mm x 500mm
Single bay: 1 x 27RU 19”/23”, 1 x 48SU, 21”
(ETSI)
Double bay: 2 x 27RU 19”/23”, 2 x 48SU, 21”
(ETSI)
MDF bay 1330mm, 630mm, 300mm
1 x 48SU (ETSI 21”)
Space 2000 pairs R&M disconnect
Battery bay 1330mm, 300mm, 630mm
Suits 2 x 48V x 150Ah FT type

Cable access
Cable Entry 3 x removable panels

Environmental
Thermal 1300W per 10°C above ambient (in equipment
Performance chamber)
External Ambient -40°C to +45°C
Temperature
IP Rating IP56 (equipment bay)
IP54 (MDF and battery bay)
Seismic Rating 2g in any direction

Construction
Cabinet Single bay: 2.0mm marine grade aluminum
Double bay: 2.5mm marine grade aluminum
Base Single bay: 3mm MS hot dipped galvanized
Double bay: 5mm MS hot dipped galvanized
Color/Finish Anti-graffiti green or beige, powder-coat

In the interests of continual product improvement all specifications are

subject to change without notice.

58 EATON DC Power Solutions Catalogue

Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
 Outdoor Enclosures
Eaton DC Power Solutions

EchoOutdoor
Echo OutdoorEquipment
Equipment
Enclosures
Enclosures

Features The Eaton Echo series of The Echo-30 is a companion to

outdoor telecommunications the Echo-B and adds up to 30U
Options: cabinets is a versatile range of of equipment mounting space.
o Echo-B – power, battery and equipment solutions for DC power, battery
The Echo-T is a stand-alone
backup and equipment
o Echo-30 – equipment variant of the Echo-B with
mounting.
o Echo-T – power, battery and equipment increased equipment mounting
The Echo-B houses DC power,
batteries and equipment. space and a generator
Air to air heat exchangers
connection.
It has mounting space for up to
High power rating
11U of 19 inch equipment. The The cabinets are cooled by a
Flexible equipment mounting included DC power system high-performance air to air heat
Fully sealed interior for long life and equipment protection provides up to 187A of load exchanger system. This uses
current plus battery recharge. temperature-controlled DC fans
Multiple enclosure options
13U of 19 inch rack space is for lowest energy use and
Full monitoring and remote control options available for equipment lowest possible noise.
Graffiti resistant paint mounting.
All cabinets are fully monitored
Three point locks – secure locks to resist tampering A flexible mounting system with remote communications
Marine grade aluminum – ensures long life and corrosion allows for a wide range of and control options.
resistance equipment mounting options.
High seismic withstand capability – for reliability in adversity To increase equipment
mounting space, add the
Echo-30.

eaton.com/telecompower 59
 Outdoor Enclosures

Technical Specifications
Output
DC Output 21.5V – 32V / 43-57.5V
Voltage Range

Dimensions .
(H, W, D)
All options H, W, D 1940 x 770x 790 mm

Equipment
Mounting
Echo-B 19inch / 21 inch x 11u (498mm)
Echo-30 19inch / 21 inch x 30u (1333mm) plus 4U reduced
depth
Echo-T 19inch / 21 inch x 12u (533mm)

DC power
Echo-B RM6 power shelf
125A essential load, 125A non-essential load
Echo-T RM3 power shelf
50A load, 30A battery recharge

Battery option
Echo-B, Echo-T Maximum 2 strings x 190Ah at 48v

Environmental
Heat dissipation
for 10°C rise
Echo-B 1500W
Echo-30 3500W
Echo-T 1500W
Ambient -20°C to +40°C Operating
Temperature -20°C to 60°C Storage
IP Rating IP55

Seismic Rating 2g in any direction

Wind survival 40m/s

Construction
Cabinet 2mm marine grade aluminum, conversion coated
Plinth 3mm mild steel, hot zinc sprayed
Color/Finish Ghost Grey or Forest Green
Anti-graffiti powder coat

In the interests of continual product improvement all specifications are

subject to change without notice

60
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
 Eaton DC Power Solutions

Bullet™ Optical Fibre Equipment

Enclosures

Standard and Active Bullet Cabinets

Features The Eaton Bullet outdoor The Eaton Active Bullet
telecommunications cabinet cabinet variant includes all the
Optical, copper and equipment mounting configurations exhibits a very low profile and fibre handling facilities and
Management for optical fibre cables, microducts, splitters and comes in just under one meter equipment mounting of the
high. In an era where street standard Bullet, and adds an
copper pairs
furniture needs to be as innocuous advanced DC power system,
Graffiti resistant paint as possible, the Eaton Bullet including monitoring and
Three point locks – secure locks to resist tampering certainly meets this requirement. batteries.
The power system and
Marine grade aluminum – ensures long life and corrosion
The base Bullet cabinet provides equipment space are cooled by
resistance
full management capability for a high-performance air to air
High seismic withstand capability – for reliability in adversity optical fibre cables, including heat exchanger system. The
Easy access for microducts/blown fibre applications facilities for managing micro-ducts exchanger uses temperature-
and blown fibre. controlled DC fans for lowest
The semi-circular end door provides energy use and lowest possible
Optional Active Cabinet DC Power Extension unrestricted access for managing noise, making them suitable for
Extension cabinet for AC/DC power system and batteries fibre entry. use in residential areas.
13U of 19 inch rack space is During prolonged power
Heat exchanger cooling for the power system and equipment available for equipment outages, simply bring in a
bay. mounting. A flexible mounting generator and plug the supplied
Direct air cooling for the batteries system allows for a wide range of power cable into the generator.
Air to air heat-exchangers – giving up to 450Watts heat equipment mounting options. The cabinet will automatically
dissipation switch over to generator power
and recharge its batteries.
Variable speed AC/DC fans – lowest noise, highest efficiency,
and operation under mains fail
Integrated Eaton AC/DC power system.
External generator connection
See technical specs for equipment mounting
Technical Specifications

Dimensions
(H, W, D)
Cabinet Only H, W, D 895x1160x400mm
With Power
Extension: H, W, D 895x1720x400mm

Equipment /MDF 900mm x 820mmx 320mm (30mm clearance to

Mountable Area door)

Useable space 13U (578 mm) x 15”/19”/23” wide x 320mm

excluding cable deep
entry area

Power 48Vdc standard, 24V optional

Batteries 1 string x 55Ahr (24V, 2 strings x 55Ahr)

Environmental
Thermal 450W + solar gain per 10°C above ambient.
Performance
Ambient -20°C to +40°C Operating
Temperature -20°C to 60°C Storage
IP Rating IP55 (equipment bay)

Seismic Rating 2g in any direction

Wind survival 40m/s

Construction
Cabinet 2mm marine grade aluminum, conversion coated
Plinth Modular concrete
Color/Finish Beige or Forest Green /Anti-graffiti powder coat

.
In the interests of continual product improvement all specifications are
subject to change without notice

EATON DC Power Solutions Catalogue

 Outdoor Enclosures
Eaton DC Power Solutions

ORC™Roadside
ORC™ RoadsideTelecom
Telecom
Equipment
EquipmentEnclosures
Enclosures

Features The Eaton ORC series of The included DC power system

outdoor telecommunications provides up to 187A of load
Air to air heat-exchangers – giving up to 5kW heat dissipation cabinets is a versatile and current plus battery recharge.
Field upgrade or replacement of heat exchangers compact range of solutions for Optional battery cabinets
DC power, battery backup and provide capacity for up to
Variable speed DC fans – lowest noise, highest efficiency, and
equipment mounting. 600Ah backup.
operation under mains fail
The ORC houses DC power,
19” standard equipment bay mounting. batteries and equipment. The cabinets are cooled by a
powerful air to air heat
Double equipment bays – more room for revenue generating Marine grade aluminium
construction and fully sealed exchanger system with the
equipment ability to dissipate up to 5kW of
technology guarantee a long
Graffiti resistant paint – aids cleaning and against vandal impact heat. This uses temperature-
maintenance-free life for the
Three point locks – secure locks to resist tampering controlled DC fans for lowest
cabinet and complete
protection for equipment energy use and lowest possible
Marine grade aluminum – ensures long life and corrosion noise. An NES-compliant option
resistance inside.
There is a wide range of is available for lowest noise
Galvanized steel plinth – for secure and simplified installation residential applications.
equipment mounting, cooling
Optional front exhaust plinth to meet New Zealand NES noise and battery options. All cabinets are fully monitored
requirements The ORC has mounting space with remote communications
Optional internal battery compartment for smaller footprint for up to 19U of 19 inch and control options.
equipment.
Optional integrated battery cabinets for longer back-up time
High seismic withstand capability – for reliability in adversity

eaton.com/telecompower 63
 Outdoor Enclosures

Technical Specifications
Specification
Dimensions
(H, W, D)
Rear vented ORC: 1300mm, 1200mm, 790mm (excludes plinth)
Front vented ORC: 1300mm, 1200mm, 860mm (excludes plinth)
Battery Cabinet: 1300mm, 420mm, 790mm (excludes plinth)
Plinth height
Rear Vented 100mm
Front Vented 300mm
Equipment bays
without battery box: 2 x 19U, 19”, 450mm deep.
with battery box: 2 x 16U, 19”, 450mm deep

Batteries
Internal: 1 string x 100Ahr
External: 2 strings x 150Ahr each cabinet
600Ahr total with left and right side cabinets

Environmental
Thermal Performance 2.5kW per 10°C above ambient.
5kW per 15°C above ambient.
Ambient -20°C to +45°C Operating
Temperature -30°C to 60°C Storage
IP Rating IP56 (equipment bay)

Seismic Rating 2g in any direction

Wind survival 40m/s (doors open)

Construction
Cabinet 2.5mm marine grade aluminum, conversion
coated
Base 5mm mild steel, hot zinc sprayed
Plinth 3mm mild steel, hot zinc sprayed
Color/Finish Ghost Grey or Forest Green /Anti-graffiti
powder coat

In the interests of continual product improvement all specifications are

subject to change without notice.
Additional Heat
Exchangers

Side panel

LH Battery Cabinet

Internal Battery boxes

RH Battery Cabinet
Side panel

64 EATON DC Power Solutions Catalogue Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
 Eaton DC Power Solutions
Outdoor Enclosures

Mini Shelter Outdoor Power and

Mini Shelter Outdoor Power and
Equipment Enclosure
Equipment Enclosure

Features The Eaton Mini Shelter is The enclosure and heat

designed to provide a secure and exchanger will ensure rain,
Steel sandwich panel construction clean environment to back-up moisture, dust and vermin is
power, communications, IT, or kept well away from the
Polyurethane insulation industrial equipment in a harsh or equipment inside. An AC 240V
Attractive powder coat finish outdoor situation. Typical heater can maintain the internal
applications include cellular BTS environment in sub-zero
Vandal resistant 3 point locking (base station transceivers), road & situations.
rail traffic measurement, data and
Galvanised steel base metrological equipment, and A battery compartment in the
48V DC Heat Exchanger for heat removal industrial process control. It is lower half of the cabinet is
suited to any application where thermally isolated from the
Filtered air inlet/outlet to battery compartment sensitive equipment and or back-up upper hot zone, ensuring best
240V AC Heater power are required to be stationed possible life time for the critical
in an environmentally harsh batteries. Options exist for
DC Power System options to 48V 10,800W, 225A location. further cooling or heating of the
battery zone.
Suits 450Ah (48V) battery capacity The enclosure is designed to resist
Remote monitoring and control of DC Power the rigours of the environment, and When using Eaton’s latest
System is made from insulated steel panels technology APS-3G (Access
and proprietary aluminium Power System) with hot-
AC Surge Protection, 48V Internal Service Light extrusions. The insulated skin swappable Energy Saver
design ensures heating from solar APR48-ES rectifier modules and
Options for 24Vdc, 110Vdc or even 240Vac output insolation is minimised and a SC200 controller, you can
secure 3 point locking system provide a highly reliable DC
Options for battery or equipment expansion together with an embedded door power source for your
and concealed hinges keep vandals equipment. When combined
from gaining access to the with Eaton’s PW range SLA
equipment within. batteries you have a fully un-
A 48V DC powered and interruptible power system to
electronically controlled heat support and run the cabinet and
exchanger removes waste heat its enclosed equipment.
through a sealed radiator using high
reliability speed controlled fans.

eaton.com/telecompower 65
 Outdoor Enclosures
Technical Specifications
Technical Specifications
Mechanical
Dimensions 905(w) x 2100(h) x 905(d) mm
Weight 225 kg (excluding DC power & batteries)

Electrical
DC Power System APS6-3G series, 225A, 48V (10,800W)
AC Input 1Ph 220/240V 50/60Hz nominal (see APS spec for
more detail)
Efficiency Greater than 96% for full load with -ES rectifiers
Alarms 6 x volt free c/o relays or RS232, Ethernet TCP/IP,
Web
Standard Extras Low Volts Disconnect, AC switch board
Charging Temperature compensation, Fast charge,
Equalize, Battery test
Meters and Adjustments Colour LCD and keypad. Also DC Tools software
Service Light 48V LED service light panel

Batteries
Typical capacity 48V x 450Ah (2 shelves of 6 x 12V 150Ah FT)

Environmental
Cooling Fan forced DC heat exchanger, 80W/°K (requires
DC system)
Protection Level IP55 in main (upper) equipment space
Operating temperature -10°C to 55 °C
Internal temperature - +10°C above ambient for 800W internal heat load
equipment
Internal temperature – battery +4°C above ambient
EMC AS3548, CISPR 22 class B

Construction
Cabinet Mild steel, polyurethane sandwich panel
Base MS hot dipped galvanised
Color/Finish Grey powder-coat to all external surfaces

Accessories IPN
APS3-321 3G Access power system, 3U 19” 3 x rect bays, SC200 121051
APS6-321 3G Access power System, 6U 19”, 6 x rect bays, SC200 121060
APR48-3G Rectifier Module, 48V 37.5A, 1800W, 92% eff 120890
APR48-ES Rectifier Module, 48V 42A, 2000W, Energy Saver, 96% 61226207
eff
Blank Rectifier Blank Panel 121074
PWTC12F150FR Battery 12V 150Ah, Front Terminal, SLA 115425

PWTC12FG50FR Battery 12V 50Ah, Front Terminal, SLA, GEL 61237831

In the interests of continual product improvement all specifications are subject to change
without notice

Eaton, CellSure, SiteSure, DCTools and

PowerManager are trade names,
66 EATON DC Power Solutions Catalogue trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Email: [email protected] © 2014 Eaton Corporation. All Rights
Notes

eaton.com/telecompower 67
Eaton ANZ support footprint

CAIRNS

TOWNSVILLE
MT ISA

GLADSTONE

BRISBANE

CANBERRA
PERTH

NEWCASTLE
ADELAIDE

SYDNEY

AUCKLAND
MELBOURNE
SALES
MANUFACTURING

T S
TA
LAUNCESTON WELLINGTON
SERVICE
HOBART
CHRISTCHURCH

24 Hour Emergency Service Hotline

AUST: 1300 303 059 NZ: 0508 NZ SERVICE (0508 697 378)

Eaton Australia: Eaton New Zealand: Eaton is a registered trademark of

Eaton Industries Pty. Ltd. Eaton Industries Company Eaton © 2014
Electrical Sector Electrical Sector
10 Kent Road Mascot, First Floor, Enable House, All other trademarks are property
NSW 2020 Australia 106 Wrights Road, Addington, of their respective owners.
1300 877 359 Christchurch 8041 NZ
www.eaton.com/telecompower 0508 EATON NZ (0508 328 666)
www.eaton.com/telecompower

800PQ

In the interests of continuous product improvement all specifications are subject to change without notice. © 2014 Eaton All Rights Reserved.