Photoelectric Sensors
BOS R090K-PU-RX10-02
Order Code: BOS02AW
1) Mode settings, 2) Emitter, 3) Optical axis, 4) Receiver, 5) Power indicator, 6) stability, 7) Sensitivity, 8) Sensitivity
Basic features Electrical connection
Approval/Conformity cULus Cable diameter D 3.50 mm
CE Cable length L 2m
UKCA Conductor cross-section 0.20 mm²
WEEE
Connection Cable, 2.00 m, PVC
Principle of operation Photoelectric sensor
Polarity reversal protected yes
Series R090K
Short-circuit protection yes
Style Square
Connection 45°
Electrical data
Display/Operation No-load current Io max. at Ue 20 mA
Operating voltage Ub 10...30 VDC
Adjuster Potentiometer 270°
Rated operating current Ie 100 mA
Rotary switch 2 positions
Rated operating voltage Ue DC 24 V
Display Output function- LED yellow
Stability - LED green Ready delay tv max. 300 ms
Setting Sensitivity (Sn) Ripple max. (% of Ue) 10 %
Light-on/dark-on Switching frequency 1000 Hz
Turn-off delay toff max. 0.5 ms
Turn-on delay ton max. 0.5 ms
Voltage drop Ud max. at Ie 2V
1/2
Internet www.balluff.com eCl@ss 9.1: 27-27-09-01
Subject to change without notice: 284113 ETIM 6.0:
BOS02AW_0.5_2024-10-10
Photoelectric Sensors
BOS R090K-PU-RX10-02
Order Code: BOS02AW
Environmental conditions Mechanical data
Ambient temperature -30...55 °C Dimension 10.7 x 32.7 x 19.5 mm
IP rating IP67 Mounting part Screw M3
Tightening torque max. 0.5 Nm
Functional safety
MTTF (40 °C) 94 a
Optical features
Ambient light max. 10000 Lux
Interface Beam characteristic Divergent
Light type LED, red light
Switching output PNP normally open/normally
Principle of optical operation Through-beam sensor
closed (NO/NC)
Switching function, optical dark-on/light-on
Wave length 660 nm
Material
Housing material PC Range/Distance
PBT
Range 0...20 m
Material jacket PVC
Rated operating distance Sn 20 m
Material sensing surface PMMA
Wiring Diagrams (Schematic)
Opto Symbols
2/2
Internet www.balluff.com eCl@ss 9.1: 27-27-09-01
Subject to change without notice: 284113 ETIM 6.0:
BOS02AW_0.5_2024-10-10
