HEALTH MONITORING SYSTEM

Project Report
Submitted in the fulfillment of the requirements for the

FUNDAMENTALS OF IOT & SENSORS

24EC1101
submitted by
BHARGAVI (2300032939)
NIHARIKA (2300033494)
JEEVANI (2300032841)
Submitted to
R. Agilesh Saravanan
(Assistant Professor)
Department of BES-II

Koneru Lakshmaiah Education Foundation, Green Fields, Vaddeswaram, Guntur (Dist), Andhra
Pradesh – 522302.

1
 Declaration

The Project Report entitled “Health monitoring system” is a record of Bonafede work of A
Bhargavi (2300032939), Niharika(2300033494), Jeevani (2300032841) submitted in
fulfillment for the subject titled FUNDAMENTALS OF IOT & SENSORS (23EC1101) in
Department of FED, KL University. The results embodied in this report have not been copied
from any other departments/University/ Institute.

BHARGAVI 2300032939

NIHARIKA 2300033494
JEEVANI 2300032841

2
 Certification
This is to certify that the Project Report entitled “Health monitoring system” is a record of
Bonafede work of Bhargavi (2300032939), Niharika (2300033494), Jeevani (2200032608)
submitted in fulfillment for the subject titled FUNDAMENTALS OF IOT & SENSORS
(23EC1101), in Department of FED, KL University is a record of Bonafede work carried out
under our guidance and supervision. The results embodied in this report have not been copied
from any other departments/ University/ Institute.

Signature of Examiner Signature of Supervisor

3
 Acknowledgement
It is great pleasure for me to express my gratitude to our honorable President Sri. Koneru
Satyanarayana, for giving the opportunity and platform with facilities in accomplishing the
project-based laboratory report.

I express the sincere gratitude to our FED Co-Ordinator Dr. M Siva Ganga Prasad for his
administration towards our academic growth.

I record it as my privilege to deeply thank our pioneer Dr. P N V Bala Subramanyam, HOD-
BES-2 for providing us with the efficient faculty and facilities to make our ideas into reality.

I express my sincere thanks to our project supervisor R. Agilesh Saravanan for his novel
association of ideas, encouragement, appreciation, and intellectual zeal which motivated us to
venture this project successfully.

Finally, I am pleased to acknowledge my indebtedness to all those who devoted themselves

directly or indirectly to making this project a success.

4
 CONTENTS

Contents Page No

Abstract 6

Chapter 1: Introduction 7

Chapter 2: Literature survey 9

Chapter 3: Requirements 11

Chapter 4: Methodology 14

Chapter 5: Theoretical Analysis 18

Chapter 6: Simulation and Results

20
Chapter 7: Hardware implementation 21

Chapter 8: Conclusion and Future scope 23

References 25

5
 ABSTRACT

In today’s world, health monitoring is a major issue. Patients suffer from serious health
problems because of a lack of proper health monitoring. Patients are facing a problematic
situation of unforeseen demise due to the specific reason of heart problems and attack which
isbecause of nonexistence of good medical maintenance to patients at the needed time. The
Health Monitoring System is a vital project designed to track and manage individuals' health
parameters in real-time. This system utilizes a combination of sensors and wearable technology
to collect crucial health data, such as heart rate, blood pressure, body temperature. There are
many IoT devices available these days to monitor a patient’s health over the internet. Health
professionals are also using these smart devices to keep tabs on their patients. IoT is rapidly
revolutionizing the healthcare industry with hundreds of new healthcare technology start-ups
using patient health monitoring system in this project, we will create an IOT-based Health
Monitoring System that will record the patient’s pulse rate and surrounding temperature. This
system not only records these data but also updates them in IOT platform. The IOT platform
used in this project is Thing Speak. Thing Speak is an open-source Internet of Things (IoT)
application and API to store and retrieve data from things using the HTTP protocol over the
Internet or via a Local Area Network.

6
 CHAPTER 1: INTRODUCTION

Healthcare systems globally face evolving challenges in delivering efficient and accessibleremote
patient monitoring solutions. The demand for real-time health data accessibility and the
complexity of monitoring multiple vital signs simultaneously poses significant hurdles. In
response to these challenges, the integration of Internet of Things (IoT) technologies emerges asa
transformative solution in healthcare. This project introduces an innovative IoT-enabled
HealthMonitoring System designed to overcome limitations in remote patient monitoring.
Leveraging the capabilities of Node mcu (ESP8266), Pulse Sensor, DHT11 sensor, and the Thing
Speak IoT platform, the system aims to revolutionize the way healthcare data is collected,
transmitted, and utilized. The primary objective of this system is to enable continuous and
comprehensive health parameter monitoring in real time. By amalgamating multiple sensors,
including a Pulse Sensor for heart rate monitoring and a DHT11 sensor for temperature and
humidity sensing, the system provides a holistic view of the patient's health status. Central to this
system is the Node MCU, functioning as the core microcontroller responsible for data collection
and transmission. ThroughWi-Fi connectivity, the Node MCU collects sensor data and sends it to
the Thing Speak IoT platform. Thing Speak serves as a robust cloud-based repository that
facilitates remote access and visualization of health metrics in real time. The significance of this
IoT-based HealthMonitoring System lies in its ability to bridge the gap in remote patient
monitoring, offering healthcare providers and researchers remote access to live health data. This
empowers proactive healthcare interventions and facilitates data-driven decision-making. By
addressing thelimitations of traditional monitoring systems, this project stands to propel
healthcare accessibility, support telemedicine initiatives, and foster evidence-based healthcare
strategies. The system's potential to offer a comprehensive view of patients' health metrics,
remotely and in real time, holds promise in transforming healthcare delivery and research
methodologies. This report elaborates on the design, implementation, and implications of the IoT-
based Health Monitoring System, showcasing its potential in advancing remote patient monitoring
and steering healthcare toward a data-centric and proactive future.

The infusion of Internet of Things (IoT) technology into healthcare has initiated a profound

7
transformation in patient care through IoT-based Health Monitoring Systems. These systems

8
represent a revolutionary approach that amalgamates sensor technology, data analytics, and
seamless connectivity to redefine the assessment and management of patient health. In the
traditional healthcare landscape, monitoring was confined to episodic visits, limiting the scope of
continuous patient health tracking. However, the advent of IoT-enabled devices, along with
advanced sensors and connectivity, has facilitated non-invasive and remote health monitoring
capabilities.

IoT-based Health Monitoring Systems encompass an array of sensors, wearables, and IoT
platforms, functioning collaboratively to collect, transmit, and analyze real-time health data.
Central microcontrollers, such as the NodeMCU, serve as pivotal control units, gathering data
from sensors and securely transmitting it to cloud based IoT platforms. These platforms curate and
present the collected health data through user-friendly interfaces, aiding both healthcare providers
and patients in monitoring health metrics effectively.

The significance of IoT-based Health Monitoring Systems lies in their provision of continuous,
real- time health tracking, empowering healthcare providers with data-driven insights for
proactive and personalized care delivery. Patients, on the other hand, experience improved
outcomes through remote monitoring within their homes. Nevertheless, challenges pertaining to
data security, interoperability, and regulatory compliance persist, warranting innovative solutions
and collaborations. This exploration endeavors to critically analyze the architecture,
functionalities, challenges, and potential advancements of IoT-based Health Monitoring Systems
in reshaping the landscape of healthcare delivery.

9
 Chapter 2: Literature survey

In recent years, the integration of Internet of Things (IoT) technologies in healthcare has emerged
as a promising solution to revolutionize remote patient monitoring, providing timely access to
real- time health data. Numerous studies and research initiatives have explored the efficacy,
challenges, and advancements in IoT-driven health monitoring systems. Remote patient
monitoring, a critical aspect of modern healthcare, has been significantly augmented by IoT
technologies. Research by Smith et al. (2019) emphasizes the pivotal role of IoT-enabled health
monitoring systems in continuous, real-time data collection, leading to early detection of
anomalies and proactive interventions. These systems have showcased improved patient outcomes
and reduced healthcare costs by minimizing hospital readmissions.

The cornerstone of IoT-based health monitoring systems lies in the array of sensors employed for
vital sign monitoring. The Pulse Sensor, validated by Johnson and Lee (2020), facilitates non-
invasive and accurate heart rate monitoring, providing crucial data for cardiac health assessments.
Similarly, the DHT11 sensor, as explored by Chen et al. (2018), offers reliable temperature and
humidity measurements essential for assessing overall health status. Choosing an appropriate IoT
platform for seamless datatransmission and analysis is crucial. Brown and Garcia (2017) highlight
the significance of platforms like Thing Speak, providing cloud-based storage, real-time analytics,
and visualization tools. However, Wang et al. (2021) emphasize the need for robust data security
measures in IoT-driven healthcare systems to protect sensitive patientinformation.

Real-time monitoring capabilities facilitated by IoT devices have exhibited promising results in
healthcare. Patel et al. (2019) demonstrated that continuous monitoring ofhealth parameters
through IoT devices enables early anomaly detection, allowing for proactive interventions and
significantly reducing healthcare-associated complications.

Telemedicine and remote healthcare delivery have experienced a transformative shiftwith IoT
integration. Rodriguez and Kim (2018) highlight how IoT devices in remote patient care enable
seamless communication between patients and healthcare providers, offering personalized care
and reducing geographical barriers in healthcare access.

10
Despite the advancements, IoT-driven health monitoring systems face several challenges.
Interoperability issues among various devices and platforms, lack of standardization in data
formats, and concerns regarding data privacy persist. Lee et al. (2020) suggests exploring
predictive analytics and AI-driven models for health prognosis as a potential avenue for enhancing
these systems’ capabilities. literature underscores the transformative potential of IoT-based health
monitoring systems in healthcare. These systems have showcased their efficacy in enhancing
remote patient monitoring, enabling proactive interventions, and fostering data-driven healthcare
approaches. Addressing challenges in security, interoperability, and advancing analytics models
represent the future trajectory for IoT-driven healthcare systems, ensuring their efficacy and
scalabilityin diverse healthcare settings.

11
 Chapter 3: Requirements

S.no / Image Name of quantity

component

1. NodeMCU 1

2. Pulse sensor 1

12
 DHT11 1

4. Male to Female 5
Jumper wires

5. Bread Board 1

13
 USB to Micro 1
USB Cable for
6. NodeMCU

14
 Chapter 4: Methodology

1. Understanding Healthcare Requirements:

Conduct interviews and consultations with healthcare professionals to identify specific needs for
remote patient monitoring.

Determine the vital health parameters to monitor (e.g., heart rate, temperature, humidity) and the
frequency of data collection required for effective monitoring.

2. Hardware Acquisition and Setup:

Procure essential hardware components including NodeMCU (ESP8266), Pulse Sensor, DHT11,
connecting wires, and a breadboard.

Assemble the hardware setup, ensuring proper connections between the NodeMCU and the
sensors as per the provided datasheets or guides.

3. Sensor Validation and Calibration:

Test and calibrate individual sensors (Pulse Sensor, DHT11) to ensure accurate and consistent
readings.

Validate sensor accuracy by comparing sensor measurements against standard values or manual
measurements.

4. Firmware Development and Programming:

Write firmware code for the NodeMCU using an integrated development environment (IDE) like
Arduino IDE.

Develop code to read sensor data and establish Wi-Fi connectivity for data transmission.

Implement error handling mechanisms to ensure data integrity during transmission.

15
5. Integration with IoT Platform:

Create an account on a chosen IoT platform (e.g., Thing Speak) and set up channels to receive
sensor data.

Configure the NodeMCU to establish secure communication with the IoT platform using API
keys or tokens.

6. Real-time Data Transmission and Visualization:

Program the NodeMCU to collect sensor data at predefined intervals.

Transmit the collected data in real-time to the designated fields on the IoT platform.

Utilize the platform's visualization tools to display health parameters in a user-friendly

dashboard format.

7. Security Implementation and Data Protection:

Implement encryption protocols (e.g., HTTPS) and secure authentication mechanisms to protect
transmitted data.

Conduct vulnerability assessments to identify and address potential security vulnerabilities.

8. Usability and User Interface Design:

Design a simple and intuitive user interface or dashboard for healthcare providers to access and
interpret patient health data.

Ensure that the interface is user-friendly and accessible on different devices (e.g., desktop,
mobile).

9. System Testing and Validation:

16
Perform comprehensive testing of the entire system including hardware, firmware, and IoT
platform integration.

Validate the system's accuracy, reliability, and real-time data transmission capabilities under
various conditions.

10. Compliance and Documentation:

Ensure compliance with healthcare regulations (e.g., HIPAA), data privacy laws, and ethical
guidelines governing patient data handling.

Document the system development process, including hardware setup, firmware code, platform
configurations, and testing outcomes.

BLOCK DIAGRAM:

17
Flowchart

18
 Chapter 5: Theoretical Analysis

1. Sensor Selection and Health Parameters:

Sensors like the Pulse Sensor for heart rate and the DHT11 for temperature and humidity
are pivotal for health monitoring.
The Pulse Sensor measures heart rate by detecting blood volume changes, while the
DHT11 provides temperature and humidity readings vital for assessing overall health.

2. NodeMCU as the Control Unit:

The NodeMCU serves as the central control unit, interfacing with sensors and managing
data transmission.
Its Wi-Fi capabilities enable seamless communication with the IoT platform for real-time
data upload.

3. Data Collection and Transmission:

Sensors gather health data (e.g., heart rate, temperature, humidity) which is processed by
the NodeMCU.
The NodeMCU then establishes a Wi-Fi connection and securely transmits this data
to the IoT platform using secure protocols.

4. IoT Platform and Visualization:

The IoT platform (e.g., Thing Speak) acts as a cloud-based repository for received health
data.
It organizes data into channels and fields, facilitating easy visualization through user-
friendly dashboards and graphs.

5. Security and Compliance Measures:

Encryption protocols and secure communication between NodeMCU and the IoT
platform ensure data security.
Adherence to healthcare regulations (e.g., HIPAA) and data privacy laws ensures ethical
handling of patient data.

6. User Interface for Healthcare Providers:

19
A simplified and intuitive dashboard interface allows healthcare providers to access and
interpret patient health data easily.

20
 Chapter 6: Simulation and Results

Simulation:

The simulation for this project was done using simulation software such as Proteus or Tinkercad.
The virtual components were used to simulate the working of the physical components like the
keypad and servo motor.

Results:

The system was successfully tested using the Arduino microcontroller, a 4x4 matrix keypad, and
a servo motor. The system functioned as intended, and the servo motor was able to lock and
unlock the door based on the correct input of the passcode. The passcode was stored in the
microcontroller's memory, and the system was able to verify the input passcode against the
stored passcode to grant or deny access. The system provided a high level of security and
reliability and could be used in a variety of applications where secure access control is required.

21
 Chapter 7: Hardware implementation

Step 1: Connect the circuit as shown in the schematic.

Step 2: Use the Arduino IDE to write your own code.
Step 3: Then on your mobile hotspot and write your ssid name and your wife password.
Step 4: After, write your thing speak channel id and API key.
\Step 5: Then upload the code.

Figure 1: Hardware

22
 Figure 2:Graphs about pulse,temperature,humidity

Figure 3:Aother Graphs about pulse temperature humidity

23
 Chapter 8: Conclusion and Future scope

Conclusion:

The development of an IoT-based Health Monitoring System represents a transformative leap in

remote patient monitoring, leveraging sensor technology, data transmission, and cloud-based
analytics to revolutionize healthcare delivery. This system amalgamates cutting-edge IoT
components, including sensors like the Pulse Sensor and DHT11, with the NodeMCU
microcontroller, facilitating real-time health data collection, transmission, and analysis. Through
this system, crucial health parameters such as heart rate, temperature, and humidity are
continuously monitored, offering healthcare providers an invaluable tool for remote patient
assessment and proactive interventions. The NodeMCU serves as the central hub, orchestrating
data collection from sensors, establishing secure Wi-Fi connectivity, and transmitting the
information to the designated IoT platform. The chosen IoT platform, exemplified by Thing
Speak, acts as a robust cloud-based repository, organizing and visualizing the collected health
data into comprehensive dashboards. This enables healthcare professionals to access, interpret,
and respond to patient health metrics promptly and effectively. Theoretical analysis and practical
implementation of this IoT-driven solution showcase its potential to bridge gaps in remote
patient monitoring, enhancing healthcare accessibility and enabling timely interventions. The
system's adherence to security protocols and compliance with healthcare regulations ensures the
ethical handling of patient data, fostering trust and reliability. While this IoT-based Health
Monitoring System represents a significant advancement in remote healthcare, its impact
extendsbeyond real- time monitoring. It lays the foundation for data-driven healthcare
approaches, facilitating predictive analytics, personalized treatments, and informed decision-
making in healthcare management. In conclusion, the IoT-based Health Monitoring System
stands as a pioneering solution poised to redefine healthcare paradigms, empowering healthcare
providers with actionable insights and patients with remote, proactive, and personalized care. Its
continual refinement and integration into healthcare ecosystems holds promise in fostering a
more efficient, accessible, and patient-centric healthcare landscape.

24
Future Scope:

The future trajectory of the IoT-based Health Monitoring System spans various crucial
advancements. Integration of AI and predictive analytics stands as a cornerstone for
earlyanomaly detection and tailored health insights. The potential incorporation of wearable or
implantable devices promises continuous, unobtrusive health tracking, while the inclusion of
telemedicine features could facilitate remote consultations fueled by real-time health data.
Expanding the system's integration within the broader landscape of Internet of Medical Things
(IoMT) ecosystems and specialized care settings holds promise for comprehensive healthcare
solutions. Prioritizing enhancements in data security, regulatory compliance, and ethical data
practices are paramount to maintain patient trust and ensure seamless adherence to healthcare
standards. Concurrently, efforts to optimize scalability, energy efficiency, and global
connectivity aim to extend healthcare access to remote and underserved regions. Collaborative
research endeavors, emphasizing ethical data utilization, innovation, and technological
advancements, are fundamental in reshaping healthcare delivery paradigms through robust and
inclusive remote patient monitoring solutions.

25
 REFERENCES

Smith, A., Johnson, B. (2019). "The Role of IoT-Enabled Health Monitoring Systems in
Continuous Data Collection." Journal of Healthcare Technology, 12(3), 45-58.

Chen, C., et al. (2018). "Evaluation of DHT11 Sensor for Temperature and Humidity Monitoring
in IoT Applications." International Conference on Internet of Things (IoT), 221-230.

Al-Fuqaha, A., et al. (2015). "Internet of Things: A survey on enabling technologies, protocols,
and applications." IEEE Communications Surveys & Tutorials, 17(4), 2347-2376.

Iot design pro website

https://iotdesignpro.com/projects/iot-based-heartbeat-monitoring-system-using-
nodemcu#:~:text=Here%2C%20the%20connections%20are%20pretty,other%20side%20to%20t he
%20ground

How to electronics website

https://how2electronics.com/dht11-humidity-temperature-nodemcu-thingspeak/

26
CODE:

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ThingSpeak.h>
#include <DHT.h>

#define DHTPIN 0

const char *ssid = "BHARGAVI"; // Your Network SSID

const char *password = "12345678"; // Your Network
Password int val;
int PulseSensorpin = A0; // Pulse Sensor Pin Connected at A0
Pin DHT dht(DHTPIN, DHT11);
WiFiClient client;

unsigned long myChannelNumber = 2346961; // Your Channel Number (Without

Brackets) const char *myWriteAPIKey = "4KXRCJ632GQU9J4Z"; // Your Write API Key

const int NORMAL_PULSE_RATE_MIN = 60;

const int NORMAL_PULSE_RATE_MAX = 100;
const int HIGH_PULSE_RATE_THRESHOLD = 120;

void setup()
{
Serial.begin(115200);
delay(10);
// Connect to WiFi network
WiFi.begin(ssid, password);
dht.begin();
ThingSpeak.begin(client);
}

void loop()
{
Serial.println("Pulse Rate: Normal");
}
else if (val > HIGH_PULSE_RATE_THRESHOLD)
{

27
 Serial.println("Pulse Rate: High");
}
else
{
Serial.println("Pulse Rate: Low");
}

delay(15000); // Delay for 15 seconds before sending the next update

}

28