Scribd
Upload
26 views2 pages

Tutorial 2-1

Uploaded by

Candy 49
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views2 pages

Tutorial 2-1

Uploaded by

Candy 49
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Siddaganga Institute of Technology

Department of Electrical & Electronics Engineering


Power Systems – III [7REE01]
Tutorial 2
1. For the network shown figure, obtain the bus admittance matrix by singular transformation analysis.
Line data is given in the table.
Line Admittance
Nodes
No. p.u.
1 1-2 1.0
2 2-3 2.0
3 3-1 1.0

2. For the network shown figure each generator and line have impedance of (0.1+j0.1) p.u. and (0.2+j0.2)
p.u. respectively. Neglecting line charging admittances form Ybus by direct inspection method.

3. For the network and data described in question 2 obtain Ybus by singular transformation method.
4. For the network shown in figure, taking node 1 as reference form the primitive matrices [z] and [y] and
obtain the bus admittance matrix by singular transformation. The data is given in table.
Elements Self-impedance Mutual impedance
1 j 0.6 -
2 j 0.5 j 0.1 (with element 1)
3 j 0.5 -
4 j 0.4 j 0.2 (with element 1)
5 j 0.2 -

5. Consider the linear graph of a power system as shown in figure. Each element has a series impedance of
(0.01+j0.06) p.u. Compute Ybus by singular transformation and verify the result with that obtained by
the direct inspection method.
6. The graph of a power system is as shown in figure. The p.u. reactance of each element is taken as j0.1
p.u. Formulate Ybus by the singular transformation method and verify the same with the Ybus obtained
by the direct inspection method.

7. Form the Ybus by the singular transformation for the network shown in figure.

8. For the power system network shown in figure, obtain YBus by the singular transformation method. The
reactance of each line is 0.01 p.u and that of the generator is j0.05 p.u. Each line has a half-line charging
admittance of j0.05 p.u.

You might also like