MæRSK

giant

– Harsh environment jack-up

– Capabilities for subsea handling
– HP/HT drilling

Giant.indd 1 22-08-2012 13:31:55

 MÆRSK GIANT
2012 Refurbishment features
The MÆRSK GIANT was refurbished in 2012. Some of the main Driller’s cabin
areas of the refurbishment included New and integrated driller’s cabin.

mud cubes major overhaul of pipe handling equipment

3 Cubility Mud cube F-02B remotely operated and fully enclosed
3-phase mud separation systems built to NORSOK I requirements moonpool area
incorporating 3 ea vacuum pumps. 2 ea systems on duty and 1 ea Extensive modification and upgrade of the moonpool area.
system on stand-by.
Accommodation
New crane Upgrade and overhaul of the accommodation.
Nov Molde OC 2500LD, 43.6 m (143 ft) boom, max. capacity 27 t

Giant.indd 2 22-08-2012 13:31:58

 MæRSK
Giant
TYPE
Hitachi Zosen, Ultra harsh environment jack-up drilling rig

BUILT
Hitachi, 1986


CLASS
Lloyds

FLAG
Denmark

The Mærsk Giant is one of the ultra harsh environment designed for year-round operation in the North Sea, in water
jack-ups in Maersk Drilling’s fleet. The rig is fully equipped for depths up to 107 m (350 ft) with an available leg length below
high pressure/high temperature (HP/HT) drilling and is hull of 132 m (435 ft).

THE MAIN FEATURES OF

THE mærsk Giant INCLUDE :

• Fully equipped for HP/HT operations

• 15,000 psi BOP system - 18¾”

• Fully integrated pipe transfer and handling system

• 16.8 m (55 ft) cantilever extension capability

• Automised operation on drill floor

Giant.indd 3 22-08-2012 13:31:59

 MAIN PARTICULARS

DIMENSIONS IMPERIAL METRIC

Length overall 277 ft 84 m

Width overall 295 ft 90 m

Depth 31 ft 9.4 m

Length of legs 525 ft 160 m

Cantilever – max. reach: aft of stern 55 ft 16.8 m

to each side of centerline 15 ft 4.6 m

Draught 15.7 ft 4.8 m

WEATHER/DESIGN CRITERIA* IMPERIAL METRIC

Water depth 350 ft 107 m

Wind speed 87 knots 45 m/sec

Penetration 16.4 ft 5m

Wave height 98.4 ft 30 m

Current (surface) 1.5 knots 0.8 m/sec

Air gap 68.8 ft 21 m

PARTICULARS IMPERIAL METRIC

Rated drilling depth 25,000 ft 7,620 m

Hook load static w/top drive 1,000,000 lb 453,600 kg

Rotary load 1,100,000 lb 498,960 kg

Setback load 400,000 lb 180,000 kg

Variable load (incl. hook load) 5000 t 5000 t

Derrick 160 ft x 30 ft x 30 ft 49 m x 9.1 m x 9.1 m

Jacking speed 1.5 ft/min 0.46 m/min

Drill water 26,500 bbl 4,213 m³

Fuel oil 4,335 bbl 690 m³

Nontoxic oil 1,849 bbl 294 m³

Brine 1,448 bbl 230 m³

Potable water 2,734 bbl 435 m³

Liquid mud 2,900 bbl 468 m³

Bulk cement 5,400 bbl 153 m³

Bulk mud 8,100 ft³ 230 m³

Accommodation 100 persons 100 persons

* North Sea Typical

Giant.indd 4 22-08-2012 13:31:59

 Drawworks Drive pipe support deck
National 1320-UE 2,000 hp driven by two GE 752 DC motors with Texas deck for conductor support 4.6 m (15 ft) aft of transom.
disk brake system. For size 30” – to be retrieved after each job. Skidable in transverse
direction with 65 tons load. The deck supports wildcat operations
Travelling equipment in the full drilling envelope.
National 583 t crown block with 6 x 60” sheaves and one 78” sheave
grooved for 1 ½” wireline. One 84” sheave for fast line. National Tensioner system
660G 500 t travelling block and hook, 6 x 60” sheaves grooved Four hydraulic cylinders each with 100 t capacity capable of
for 1½” wireline. providing tension in the conductor in all positions inside the
cantilever well pattern. Complete with accumulator bank providing
Top drive and pipe handling continuous tension.
Varco TDS-4S top drive system with PH85 pipe handler,
complete with a GE 752 DC motor, 1,100 hp, max. 250 rpm. Drilling instrumentation
Capacity 454 t. Varco rig sense system with multi-parameter and alarm settings.
Varco PRS 8i pipe racking machine. Range 2 7⁄8” - 9 ¾”. Max. lift 10 t.
Varco pipe pick-up/lay-down machine (PTS 3). Range 2 7⁄8” - 20” Power supply
consisting of pipe deck machine, pipe conveyor and pipe transfer Five Caterpillar 3516 DITA air-start diesel driven engines, 1,231 kW,
machine. each driving one GE GTA 30 1,560 kVA AC generator, 1,200 rpm, 600
Apply fully interlocked zone management system (ZMS). V and 60 Hz. One Caterpillar 3508 DITA diesel engine with one 480
kW AC emergency generator.
Rotary table
National C-495, 49 ½” rotary table with hydraulic drive. Note: SCR system
Hydraulic motor not for drilling. Hill Graham SCR system with two dual DC drive units and
three single DC drive units with Sace Megamax main breaker
Mud pumps protection.
Three National 12-P-160, triplex pumps, each driven by two GE 752
DC motors. Rating 1,600 hp, max. liner size 7 ¼”, stroke length 12” Cranes
speed 120 spm. Rated for 5,000 psi. One Nov Molde OC 2500LD, 43.6 m (143 ft) boom, max. capacity
27 t. One Nov Molde OC 2500LD, 40 m (130 ft) boom, max capacity
Cementing equipment 45 t. One Nov Molde OCLD 3000, 52.8 m (173 ft) boom, max capacity
Halliburton HC525, 25 bbl cementing unit. On free placement 65 t.
agreement.
Helicopter deck
Well control equipment 25 m (83 ft) diameter helicopter deck suitable for Sikorsky S-61N
Shaffer NXT 18 3∕4” - 15,000 psi consisting of one 10,000 psi annular helicopter and S-92 helicopters.
preventer, one 15,000 psi double ram preventer and one 15,000 psi
single ram preventer. Safety equipment
Vetco Gray diverter system type KFDJ 500 psi. Lifesaving and fire fighting equipment in accordance with Danish
Maritime Authority, U.K. DOE/DOT and Norwegian regulations,
Mud return system draft of IMO MODU code 1989. The rig holds a vessel specific
3 Cubility Mud cube F-02B remotely operated and fully enclosed safety case which has been approved by HSE UK.
3-phase mud separation systems built to NORSOK I requirements
incorporating 3 ea vacuum pumps. 2 ea systems on duty and 1 ea Accommodation
system on stand-by. 100 persons in eight one-man rooms and 46 two-man rooms
Wellco 5200 vacuum degasser. Mud gas separator with 10” gas with full facilities. Six offices and three recreation rooms.
vent outlet 49 m (160 ft) above the drill floor and 20’ dip tube.

Giant.indd 5 22-08-2012 13:32:01

Giant.indd 6 22-08-2012 13:32:01
Giant.indd 7 22-08-2012 13:32:02
 Head offi ce:

Maersk Drilling
50, Esplanaden
1098 Copenhagen K
Denmark

Telephone: +45 3363 3363

Telefax: +45 3363 3182

E-mail: [email protected]
www.maerskdrilling.com

Follow us on Facebook

Maersk Drilling Norge AS Maersk Drilling, Baku Maersk Drilling Malaysia SDN BHD
Christian August Thorings veg 9 9th Floor ISR Plaza Business Center (26129-H)
P.O. Box 134 Forus 69 Nizami Street Suite 14.4, 15th Floor, West Wing
4065 Stavanger Baku AZ1000 Rohas Perkasa, No. 8 Jalan Perak
Norway Azerbaijan 50450 Kuala Lumpur
Malaysia
Telephone: +47 52 01 70 00 Telephone: +994 12 4978450
Telefax: +47 52 01 70 01 Telefax: +994 12 4978467 Telephone: +603-21712885
+603-21632884
E-mail: [email protected] E-mail: [email protected] Telefax: +603-21813888

Maersk Drilling UK Ltd. Maersk Drilling, Venezuela Maersk Drilling USA Inc.
City Wharf Edifi cio MCVSA 2500 City West Boulevard
Shiprow Muelle Terminales Maracaibo Suite 1850
Aberdeen AB11 5BY Las Morochas Houston
United Kingdom Estado Zulia Texas 77042
Venezuela USA
Telephone: +44 1224 243100
Telefax: +44 1224 243213 Telephone: +58 265 4005501 Telephone: +1 713 346 4300
Telefax: +58 265 6311435 Telefax: +1 713 783 9409
E-mail: [email protected]
E-mail: [email protected] E-mail: [email protected]

Maersk Drilling Australia Pty Ltd Maersk Drilling Services A/S, Brunei Maersk Drilling HBA, LDA.
Level 1, 1 Preston Street Brunei Branch Lot 7272 Tensai Business Center, 1st floor, Luanda-South,
Como, WA 6152 Simpang 73, Sungai Duhon Talatona Sector, Zone CS8, Gleba GU22,
Australia Light Industrial Area Municipio Samba, Provincia Luanda.
Kuala Belait KA3131 P.O. Box 6303
Telephone: +61 8 6436 1400 Negara Brunei Darussalam Luanda, Angola
Telefax: +61 8 6436 1444
Telephone: +673 223 9955 Telephone: +244 226430194
E-mail: [email protected] Telefax: +673 223 9958

E-mail: [email protected]

July 2012

Giant.indd 8 22-08-2012 13:32:02