PD503-004A

Surgical
Mobile C-Arm
Imaging System WHA-200 OPESCOPE ACTIVO

GENERAL
The OPESCOPE ACTIVIO (WHA-200) is an imaging system which main applications are
X-ray fluoroscopy and radiography during surgery.
 WHA-200 OPESCOPE ACTIVO
FEATURES
1. Low irradiation 6. Digital Image Processing Function
(1) The system offers genuine pulsed fluoroscopy at (1) The digital imaging data can be stored in HDD.
15 pulses per second as standard. EIA (2) It is enable to Real-time DSA .
(2) Three fluoroscopy modes are available: Normal,
Low Dose and High Quality mode. The
CONFIGURATION
combination of these modes with pulsed
fluoroscopy provides the flexibility to handle all STANDARD CONSTITUTION
situations. C-arm cart 1set
(3) The system allows the insertion of a Beam X-ray generator 1set
Hardening (BH) filter to cut soft X-rays by up to XTV system 1set
50%. X-ray tube 1set (including collimator)
(4) Eight fluoroscopic images can be stored in 17cm (7inch) I.I.
memory (frame memory function). or 23/16cm (9/6inch) I.I. 1set
Monitor cart 1set (including 17"/1monitor)
2. Speedy
(1) The fully balanced C-arm is manually operated. OPTIONAL ITEM
The independent electromagnetic lock • Hand switch
mechanisms allow individual locking of all This is the hand switch for radiography film.
movements, which ensures quick and accurate • I.I. handle
positioning. While this switch is pressed, the locks of C-arm
(2) Pre-programmed anatomical programs can be are released.
preset for each operated region providing optimal • Laser pointer
images by one-touch operation. Built into the X-ray generator, projection type,
APR Parameters cross-shaped
X-ray conditions • Cassette holder
(including fluoroscopy mode and pulse rate) Usable cassettes: 24 30 cm (10" 12"),
BH filter selection max.15mm thick
I.I. field of view (9-inch I.I.) Radiographic range: Approx. 23cm
Parallel collimator (angle, aperture) • Sterilized cover
C-leaf collimator (aperture) There are disposable and washable (cloth) types
Camera (image) rotation position
of sterilized cover. Either of these can be fitted.
H/V reverse • 2 monitor option
(3) While the switch on the I.I. handle is pressed, the Second, 17” CRT used as the reference monitor.
lock on movement of the C-arm are released. The • Fiber Grid
I.I. handle allows rapid single-handed C-arm Ratio: 10:1,
positioning. (Optional) Strips per centimeter: 44lines/cm,
Inter space material: Fiber
3. High quality imaging • Video printer and VTR units
The system incorporates a 400,000pixel CCD • High line display kits
camera and a 100kHU X-ray tube for high-resolution High resolution (1125 scan lines) display kits
imaging. • Digital imaging processor
• Loop memory option
4. Compact and light This option enables loop recording with 64 frames
The system has been made angle-free and compact. and super-shot mode.
Its light weight and large rear caster make it • 6.4inch LCD monitor
convenient to maneuver. This monitor attached to C-arm cart can display
fluoroscopy image of the monitor cart.
5. Clean The upper limit of the temperature for operation
The cables are incorporated into the C-arm, so they is +35 Celsius degree.
will not come into contact with the patient or surgical
instruments, allowing the system to be used safely.

2
 WHA-200 OPESCOPE ACTIVO
Digital Image Processing Function
(Option)
1. Image mode 4. Others
•Continuous Fluoroscopy •Pulse Fluoroscopy •Input signal
•Digital spot • Serial •DSA •MAP Signal level : VS 1.0 Vp-p (75ohm terminating)
•Loop recording image TV system : EIA 525 lines/60Hz
(Serial/DSA rate: EIA max.5fps, CCIR max 4fps) CCIR 625 lines/50Hz
•Output signal
Signal level : VS 1.0 Vp-p (75ohm terminating)
2. Image storage TV system : EIA 525 lines/60Hz
• IC memory : EIA 768 480 11 bits 68 frames CCIR 625 lines/50Hz
: CCIR 761 580 11 bits 56 frames • AD converter
• HDD : 16770 images Resolution: 10 bits (1024 level gray scale)
Sampling rate: EIA 14.318MHz
•Image storage unit for long period : 5inch MOD (option) CCIR 14.1875MHz
• DA converter
Digital unit is build in the monitor cart. Resolution: 10 bits (1024 level gray scale)
The power for digital unit is supplied from monitor cart. • Horizontal/Vertical linearity error: 2%

3. Image processing function

•Window/Level adjustment •Edge enhancement
•Recursive filtering •Gamma
•Vertical inversion •Horizontal inversion
•Negative/Positive inversion
•Zoom •Multi image display •Cyclic display
•Subtraction •Remask

3
 WHA-200 OPESCOPE ACTIVO
SPECIFICATIONS
C-arm cart
SID 900mm
Minimum horizontal X-ray level from floor 785mm (With C-arm above bed)
1095mm (With C-arm under bed)
C-arm rotation 120°
C-arm holder rotation 300/ 120
C-arm longitudinal travel 450mm
C-arm compression travel 200mm
C-arm swiveling 12.5°

X-ray control unit

Nominal maximum output 2kW
Short time rating 60kV 200mAs
110kV 100mAs
Long time rating 110kV 3mA
60kV 5mA
110kV 5mA (High quality mode)
60kV 9mA (High quality mode)
Setting range of tube voltage 40 110kV
Setting range of mAs 0.5 200mAs
Rate of pulse fluoroscopy (EIA) 2, 3.75, 5,7.5, 10, 15fps
(In case of digital image process option 3.75,7.5,15fps)
(CCIR) 1.7,3.1,4.2,6.25,8.3,12.5fps
(In case of digital image process option 3.13,6.25,12.5fps)

X-ray tube
X-ray tube type Fixed anode type
Focal spot size 0.6mm
Thermal capacity 100kHU
Target (angle and material) 8°, Tungsten

Collimator
C-leaf collimator Electrical drive (opening/closing), made of Pb
Parallel collimator Electrical drive (opening/closing and rotation), made of Cu
Compensating filter Electrical drive (filter selection), made of Cu,
0.1,0.2,0.3mm thick
Inherent filtation 0mm

I.I.
Input field size 170mm (7inch) or 230mm/160mm(9/6 inch)

XTV system
Camera type CCD camera
Scanning lines EIA 525 lines
CCIR 625 lines
Effective picture elements EIA 768(H) 494(V)
CCIR 752(H) 582(V)
Imaging memory 8 images
Scanning system 2:1 interrace

TV monitor
Monitor type 17 inch CRT

Grid
Grid ratio 8:1
Strips per centimeter 40 lines/cm
Inter space material Al

4
 WHA-200 OPESCOPE ACTIVO
Environmental Conditions and Power Supply
Use Conditions
Temperature 10 40
Relative Humidity 30 85% (Free of dew condensation)
Atmospheric pressure 700 1060 hPa
Atmosphere Atmosphere without explosive gases or corrosive gases
Power supply
System Single phase AC
Frequency 50 or 60Hz
Capacity 3kVA
Voltage and power impedance 100, 110, 120 V 10% less than 0.2
200, 220, 230, 240 10% less than 0.8
Grounding less than 100
Main breaker Inverter-applicable

DIMENSIONS

Unit : mm
Weight : C-arm cart 250kg
Monitor cart 140kg
(In case of 2monitor option : +30kg)
(In case of digital image process option : +12kg )

Remarks
* Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each site.
* The appearances and specifications are subject to change for reasons of improvement without notice.
* Certain configurations may not be available pending regulatory clearance. Contact your Shimadzu
representative for information on specific configurations.

SHIMADZU CORPORATION. International Marketing Division

3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax: 81(3)3219-5710
Cable Add.: SHIMADZU TOKYO

URL http://www.shimadzu.com