ATF MATIC S
Description
ATF MATIC S multi-vehicle Automatic Transmission Fluid mainly for Nissan vehicle but
also usable for other continental and Asian vehicles, delivering long-lasting shifting
performance and component durability for today’s automatic transmissions over their
standard service life. Its wide coverage of major manufacturer specifications, extensive
bench testing and field-testing, makes it suitable for use for virtually all automatic
transmissions. For this reason, it reduces the risk of using the wrong oil and simplifies
inventory management.
Performance Benefits
Outstanding anti-shudder performance Excellent seal compatibility and
and smooth shifting conditioning to reduce the risk of fluid
leaks from seal shrinkage, hardening
and cracking
Excellent resistance to oxidation and Very good foaming propertie
thermal breakdown, providing longer
fluid life, extended protection and
optimal fuel efficiency
Superior cleanliness that keeps the Very effective to rust and corrosion
transmission free from sludge and
varnish so that the transmission stays
clean and functions properly
Applications
TESTING METHODS RESULTS
SAE GRADE 32W
VISCOSITY, ASTM D445
cSt @ 40 °C 25.28
cSt @ 100 °C 5.2
The information contained in this document is based on data believed to be reliable and relates only to matters specifically
mentioned in this document. Although all reasonable skill and care is taken in preparation of this information, no representation,
warranty or guarantee is made with regards to accuracy, reliability and completeness.
Viscosity Index, ASTM D 2270 N/A
FOAM SEQUAL III @ 24 °C 0
FOAM SEQUAL II @ 93.5 °C 0
Pour Point, ºC, ASTM D 97 -15
Foam, Seq I @ 24°C 0
Density @ 15ºC kg/l, ASTM D 4052 0.83
Approval
GM DEXRON®-VI
• JASO M315-2013 1A, JASO M315-2013 2A
• JWS 3309, JWS 3314, JWS 3317
Meets Exceeds the performance requirements of:
• Aisin Warner JWS 3309
• ATF RED 1/ RED 1K
• BMW LA2634, LT71141, 7045E, ETL-8072B, MINI T-VI
• Ford MERCON®, Ford FNR5, Ford XT-2-QDX (M), XT-2-QSM (Syn), (XT-8-QAW) JWS 3309, XL-12
• FUSO ATF-II/ATF-SP III/ATF A4
• GM DEXRON® IIIH
• Hino Blue Ribbon ATF
• Honda ATF Z1 (except CVT)
• Hyundai/Kia SP-II/SP-III
• Mazda ATF D-II/ATF M-III/ATF M-V/ATF F-1/ATF S-1/ATF N-1/ATF-3317
• Mitsubishi Diaqueen SK/SP-II/SP-III/J2
• Nissan Matic Fluid C/D/J/K
• Peugeot/Citroen (PSA) AL4
• Renault Matic D2/DPO/AL4
• Subaru ATF/ATF HP/ATF 5AT
PRODUCTS AVAILABLE IN 18L, 200L
Health, Safety & Environment
Health and Safety
• Our Lubricant is unlikely to present any significant health or safety hazard when
properly used in the recommended application and good standards of personal
hygiene are maintained.
• Avoid contact with skin. Use impervious gloves with used oil. After skin contact,
wash immediately with soap and water.
• Guidance on Health and Safety is available on the appropriate Material Safety
Data Sheet, which can be obtained from http://www.advancelubeholdings.com
• Protect the Environment Take used oil to an authorized collection point.
• Do not discharge into drains, soil or water. Additional Information Advice on
applications not covered here may be obtained from our representative.
The information contained in this document is based on data believed to be reliable and relates only to matters specifically
mentioned in this document. Although all reasonable skill and care is taken in preparation of this information, no representation,
warranty or guarantee is made with regards to accuracy, reliability and completeness.
The information contained in this document is based on data believed to be reliable and relates only to matters specifically
mentioned in this document. Although all reasonable skill and care is taken in preparation of this information, no representation,
warranty or guarantee is made with regards to accuracy, reliability and completeness.
