CMOS CAMERA MODULES

your BEST camera module partner

KLT-MAA12-IMX586 V1.0
48MP Sony IMX586 MIPI Interface Auto Focus Camera Module

Front View Back View

Specifications
Camera Module No. KLT-MAA12-IMX586 V1.0
Resolution 48MP
Image Sensor IMX586
Sensor Type 1/2.0"
Pixel Size 0.8 um x 0.8 um
EFL 4.74 mm
F.NO 1.79
Pixel 8000 x 6000
View Angle 79.4°(DFOV) 67.2°(HFOV) 53.2°(VFOV)
Lens Dimensions 10.80 x 10.80 x 6.40 mm
Module Size 18.61 x 9.00 mm
Module Type Auto Focus
Interface MIPI
Auto Focus VCM Driver IC DW9767
Lens Model KLT-LENS-PS60122A100
Lens Type 650nm IR Cut
Operating Temperature -20°C to +70°C
Mating Connector OK-10F030-04

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

KLT-MAA12-IMX586 V1.0
48MP Sony IMX586 MIPI Interface Auto Focus Camera Module

Top View Side View

Bottom View Mating Connector

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
No Name
01 AVDD1 2.8V
02 AVDD2 1.8V
03 GND
04 MCP
05 MCN
8000
06 DGND
6000

07 MDPO
08 MDNO 6.40±0.15
09 DGND
6.20±0.15
10 MDP2
11 MDN2
VCM+
10.8±0.15 VCM- 3.9±0.1 10.8±0.15
T2.4 Protective Film
12 DOVDD 1.8V 1
13 DVDD1 1.1V
10.8±0.15

14 DVDD2 1.1V
copper grounding
15 PVDD NC
16 PGND NC 0.4±0.05
18.61±0.20

17 AFVDD 2.8V 1
18 AFGND UV Glue 0.12±0.03
19 MDN1 1 PIN
20 MDP1
Mark点 #15
，
copper grounding
21 DGND
22 MDN3 #30 #16 0.4±0.05
2±0.15

23 MDP3 4.5±0.15 OK-10GM030-04

24 DGND 9±0.20
25 XVS-OUT NC
26 RESET
TOP VIEW SIDE VIEW BOTT0M VIEW
27 SCL
28 SDA
29 MCLK
30 AGND
： 、 ：
、 ： ：
： ：
： ：
： ：
：
：
 CMOS CAMERA MODULES
your BEST camera module partner
Lens Model: KLT-LENS-PS60122A100

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 DW9767
Bi-directional AF Driver IC with 8KBytes eFlash

FEATURES GENERAL DESCRIPTION

Bi-directional current driver for autofocus The DW9767 is designed for linear control of bi-
10-bit resolution DAC (Typ. +/- 100mA) directional voice coil motors. The DW9767 is a single
Embedded 8Kbyte eFlash memory 10-bit DAC with a typical +/- 100mA output current
TM
Smart Actuator Control (SAC ) mode sinking capability and has an 8Kbyte eFlash memory.
TM
Supply voltage range (VDD): 2.3V to 3.3V This device features Smart Actuator Control (SAC )
I/O voltage range (VIN): 1.8V to VDD mode which can minimize the mechanical vibration and
2 TM
Fast mode and Fast mode plus I C interface compatible achieve very fast mechanical settling time. The SAC is
Power On Reset (POR) protected by patent and registered trademark of
Thermal Shutdown (TSD) DONGWOON ANATECH.
S/W Memory protection
Power down mode less than 1uA The DW9767 operates from a single 2.3V to 3.3V supply.
2
Package: 8-pin WLCSP (0.77mm x 1.70mm x 0.30mm) The internal DAC and eFlash are controlled via an I C
serial interface that operates at clock rate up to 1MHz.
APPLICATIONS The DW9767 offers a power down mode with current
Mobile cameras consumption less than 1uA.DW9767 has software
Digital still cameras protection, it is available to guard against inadvertent
Camcorders writes.
Web cameras
Action cameras The DW9767 can be used for auto focus applications in
mobile cameras, digital still cameras, camcorders, web
cameras and action cameras.

TYPICAL APPLICATION CIRCUIT

VDD

VDD
VIN
Cd=1uF
GND OUTP
(+)

Rp Rp VCM
DW9767
SCL
(-)
SDA OUTN
HOST CEN

ID

Bi-direction

www.dwanatech.com Confidential
May 12, 2017 Rev.0.40 Preliminary
Diagonal 8.000 mm (Type 1/2.0) 48Mega-Pixel CMOS Image Sensor with Square Pixel
for Color Cameras

IMX586-AAJH5-C
General description and application

IMX586 is a diagonal 8.000 mm (Type 1/2.0) 48 Mega-pixel CMOS active pixel type stacked image sensor with a
square pixel array. It adopts Sony's back-illuminated and stacked CMOS image sensor to achieve high speed image
capturing by column parallel A/D converter circuits and high sensitivity and low noise image (comparing with
conventional CMOS image sensor) through the backside illuminated imaging pixel structure. R, G, and B pigment
primary color mosaic filter is employed. It operates with five power supply voltages: analog 2.9 V and 1.8V, digital 1.1
V, PLL-PHY 1.1V and 1.8 V for input/output interface and achieves low power consumption.
In addition, this product is designed for use in cellular phone and tablet PC. When using this for another application,
Sony Semiconductor Solutions Corporation does not guarantee the quality and reliability of product. Therefore, don’t
use this for applications other than cellular phone and tablet PC. Consult your Sony Semiconductor Solutions
Corporation sales representative if you have any questions.

Functions and Features

◆ Back-illuminated and stacked CMOS image sensor

◆ Quad Bayer Coding color filter arrangement
◆ Phase Detection Auto Focus (PDAF)
◆ High Frame Rate 30fps@Full resolution (QBC Re-mosaic) / 30fps@QBC-HDR / 120fps@2x2 Adjacent Pixel
Binning (16:9) / 240fps@2x2 Adjacent Pixel Binning V2H2(16:9)
◆ High signal to noise ratio(SNR)
◆ Dual sensor synchronization operation
◆ Built-in 2D Dynamic Defect Pixel Correction
◆ Lens Shading Correction (LSC)
◆ Built-in temperature sensor
◆ Output video format of RAW10/8, COMP8
◆ QBC Re-mosaic function
◆ QBC HDR function
◆ Two PLLs for independent clock generation for pixel control and data output interface
◆ CSI-2 serial data output
MIPI D-PHY 2lane/4lane, Max. 2.5Gbps/lane, D-PHY spec. ver. 1.2 compliant
MIPI C-PHY 1/2/3trio, Max 2.5Gsps/Trio, C-PHY spec ver. 1.0 compliant
◆ 2-wire serial communication (Supports I2C "Fast mode" and "Fast-mode Plus")
◆ 28K bit of OTP ROM for users

Sony Semiconductor Solutions Corporation reserves the right to change products and specifications without prior notice.
This information does not convey any license by any implication or otherwise under any patents or other right.
Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony Semiconductor Solutions
Corporation cannot assume responsibility for any problems arising out of the use of these circuits.

1 E18Y10B9Z
Copyright 2018, 2019 Sony Semiconductor Solutions Corporation
 IMX586-AAJH5-C

Device Structure

◆ CMOS image sensor

◆ Image size : Diagonal 8.000 mm (Type 1/2.0)
◆ Total number of pixels : 8032 (H) × 6248 (V) approx. 50.18 M pixels
◆ Number of effective pixels : 8032 (H) × 6088 (V) approx. 48.89 M pixels
◆ Number of active pixels : 8000 (H) × 6000 (V) approx. 48.00 M pixels
◆ Chip size : 7.504 mm (H) × 5.659 mm (V)
◆ Unit cell size : 0.80 μm (H) × 0.80 μm (V)
◆ Substrate material : Silicon

Absolute Maximum Ratings

Item Symbol Ratings Unit notes

Supply voltage (analog1) VANA1 -0.3 to +4.2 V
Supply voltage (analog2) VANA2 -0.3 to +2.52 V
Supply voltage (digital1, digital2(PLL-PHY)) VDIG1,2 -0.3 to +1.54 V refer to
Supply voltage (interface) VIF -0.3 to +2.52 V VSS level

Input voltage (digital) VI -0.3 to +2.52 V

Output voltage (digital) VO -0.3 to +2.52 V
Guaranteed Operating temperature TOPR -20 to +70 ˚C
Guaranteed storage temperature TSTG -30 to +80 ˚C
Guaranteed performance temperature TSPEC -20 to +60 ˚C

Recommended Operating Voltage

Item Symbol Ratings Unit notes

Supply voltage (analog1) VANA1 2.9 ± 0.1 V
Supply voltage (analog2) VANA2 1.8 ± 0.1 V refer to
Supply voltage (digital1, digital2(PLL-PHY)) VDIG1,2 1.1 ± 0.1 V VSS level

Supply voltage (interface) VIF 1.8 ± 0.1 V

2
Copyright 2018, 2019 Sony Semiconductor Solutions Corporation
 CMOS CAMERA MODULES
your BEST camera module partner
Camera Module Pinout Definition Reference Chart
OmniVision Sony Samsung On-Semi Aptina Himax GalaxyCore PixArt SmartSens Sensors
Pin Signal Description
DGND GND ground for digital circuit
AGND ground for analog circuit
PCLK DCK DVP PCLK output
XCLR PWDN XSHUTDOWN STANDBY power down active high with internal pull-down resistor
MCLK XVCLK XCLK INCK system input clock
RESET RST reset active low with internal pull-up resistor
NC NULL no connect
SDA SIO_D SIOD SCCB data
SCL SIO_C SIOC SCCB input clock
VSYNC XVS FSYNC DVP VSYNC output
HREF XHS DVP HREF output
DOVDD power for I/O circuit
AFVDD power for VCM circuit
AVDD power for analog circuit
DVDD power for digital circuit
STROBE FSTROBE strobe output
FSIN synchronize the VSYNC signal from the other sensor
SID SCCB last bit ID input
ILPWM mechanical shutter output indicator
FREX frame exposure / mechanical shutter
GPIO general purpose inputs
SLASEL I2C slave address select
AFEN CEN chip enable active high on VCM driver IC
MIPI Interface
MDN0 DN0 MD0N DATA_N DMO1N MIPI 1st data lane negative output
MDP0 DP0 MD0P DATA_P DMO1P MIPI 1st data lane positive output
MDN1 DN1 MD1N DATA2_N DMO2N MIPI 2nd data lane negative output
MDP1 DP1 MD1P DATA2_P DMO2P MIPI 2nd data lane positive output
MDN2 DN2 MD2N DATA3_N DMO3N MIPI 3rd data lane negative output
MDP2 DP2 MD2P DATA3_P DMO3P MIPI 3rd data lane positive output
MDN3 DN3 MD3N DATA4_N DMO4N MIPI 4th data lane negative output
MDP3 DP3 MD3P DATA4_P DMO4P MIPI 4th data lane positive output
MCN CLKN CLK_N DCKN MIPI clock negative output
MCP CLKP MCP CLK_P DCKN MIPI clock positive output
DVP Parallel Interface
D0 DO0 Y0 DVP data output port 0
D1 DO1 Y1 DVP data output port 1
D2 DO2 Y2 DVP data output port 2
D3 DO3 Y3 DVP data output port 3
D4 DO4 Y4 DVP data output port 4
D5 DO5 Y5 DVP data output port 5
D6 DO6 Y6 DVP data output port 6
D7 DO7 Y7 DVP data output port 7
D8 DO8 Y8 DVP data output port 8
D9 DO9 Y9 DVP data output port 9
D10 DO10 Y10 DVP data output port 10
D11 DO11 Y11 DVP data output port 11

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner
Cameras Applications

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner
Camera Reliability Test

Reliability Inspection Item

Testing Method Acceptance Criteria
Category Item

Storage High 60°C 96 Hours Temperature Chamber No Abnormal Situation

Temperature Low -20°C 96 Hours Temperature Chamber No Abnormal Situation

Operation High 60°C 24 Hours Temperature Chamber No Abnormal Situation

Temperature Low -20°C 24 Hours Temperature Chamber No Abnormal Situation
Environmental
Humidity 60°C 80% 24 Hours Temperature Chamber No Abnormal Situation

High 60°C 0.5 Hours

Thermal Shock Low -20°C 0.5 Hours Temperature Chamber No Abnormal Situation
Cycling in 24 Hours

Drop Test Without Package 60cm 10 Times on Wood Floor Electrically Functional
(Free Falling) With Package 60cm 10 Times on Wood Floor Electrically Functional
50Hz X-Axis 2mm 30min Vibration Table Electrically Functional
Vibration Test 50Hz Y-Axis 2mm 30min Vibration Table Electrically Functional
Physical
50Hz Z-Axis 2mm 30min Vibration Table Electrically Functional

Loading Weight 4 kg
Cable Tensile
60 Seconds Tensile Testing Machine Electrically Functional
Strength Test
Cycling in 24 Hours

Contact Discharge 2 KV ESD Testing Machine Electrically Functional

ESD Test
Air Discharge 4 KV ESD Testing Machine Electrically Functional
Electrical On/Off 30 Seconds
Aging Test Power Switch Electrically Functional
Cycling in 24 Hours

USB Connector On/Off 250 Times Plug and Unplug Electrically Functional

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
Camera Inspection Standard your BEST camera module partner

Inspection Item
Inspection Method Standard of Inspection
Category Item
Color The Naked Eye Major Difference is Not Allowed.
FPC/ PCB Be Torn/Chopped The Naked Eye Copper Crack Exposure is Not Allowed.
Marking The Naked Eye Clear, Recognizable (Within 30cm Distance)

Scratches The Naked Eye The Inside Crack Exposure is Not Allowed
Gap The Naked Eye Meet the Height Standard
Holder
Appearance Screw The Naked Eye Make Sure Screws Are Presented (If Any)
Damage The Naked Eye The Inside Crack Exposure is Not Allowed
Scratch The Naked Eye No Effect On Resolution Standard
Contamination The Naked Eye No Effect On Resolution Standard
Lens
Oil Film The Naked Eye No Effect On Resolution Standard
Cover Tape The Naked Eye No Issue On Appearance.
No Communication Test Board Not Allowed

Bright Pixel Black Board Not Allowed In the Image Center

Dark Pixel White board Not Allowed In the Image Center
Blurry The Naked Eye Not Allowed
No Image The Naked Eye Not Allowed
Vertical Line The Naked Eye Not Allowed
Horizontal Line The Naked Eye Not Allowed
Function Image Light Leakage The Naked Eye Not Allowed
Blinking Image The Naked Eye Not Allowed
Bruise Inspection Jig Not Allowed

Resolution Chart Follows Outgoing Inspection Chart Standard

Color The Naked Eye No Issue
Noise The Naked Eye Not Allowed
Corner Dark The Naked Eye Less Than 100px By 100px
Color Resolution The Naked Eye No Issue
Height The Naked Eye Follows Approval Data Sheet
Width The Naked Eye Follows Approval Data Sheet
Dimension
Length The Naked Eye Follows Approval Data Sheet
Overall The Naked Eye Follows Approval Data Sheet

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

KLT Package Solutions

KLT Camera Module Complete with Lens ProtecƟon Film

Tray with Grid and Space Place Cameras on the Tray

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Camera Modules Package Solution

Full Tray of Cameras Cover Tray with Lid

Put Tray into AnƟ-StaƟc Bag Vacuum the AnƟ-StaƟc Bag

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Camera Modules Package Solution

Sealed Vacuum Bag with Labels
1. Model and Description 2. Quantity 3. Shipping Date 4. Caution

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Large Order Package Solution

Place Foam Sheets Between Trays Foam Sheets are Slightly Larger than Trays

Place Foam Sheets and Trays into Box Foam Sheets are Tightly Fiƫng Box

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Small Order Package Solution

Place Foam Sheets and Trays into Small Box Foam Sheets are Nicely Fiƫng the Small Box

Package in Small Box for Shipment Place Small Boxes into Larger Box

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Carbon Box Package Solution

Seal the Carbon Box Final Package Labelled Box

Carbon Box Ready for Shipment

1. Delivery Address and Phone No. 2. Box No. and Ship Date 3. Fragile Caution

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Sample Order Package Solution

Place Sample into Small AnƟ-StaƟc Bag Place Connectors into Small Ant-StaƟc Bag

Sample Labels on the Small Bag

1. Camera Module or Connector Model 2. Shipping Date and Quantity 3. Caution

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner

Connectors Large Order Package Solution

Connectors in a Wheel Label Connectors in the Wheel

The Wheel is Perfectly Fiƫng the Box Connectors Box Ready for Shipment

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner
Company Kai Lap Technologies (KLT)

Kai Lap Technologies Group Limited. (KLT) was established in 2009, a next-generation technology driven manufacturer
specialized in research, design, and produce of audio and video products. KLT is occupying 20,000 square feet
automated plants with 100 employees of annual throughput 30,000,000 units cameras.

KLT provides OEM, ODM design, contract manufacturing, and builds the camera products. You may provide the
requirements to us, even with a hand draft, our sales and engineering work together to meet your needs. We consider
ourselves your last-term partner in developing practical and innovative solutions.

Our team covers everything from initial concept development to mass produced product. KLT specializes in customized
camera design, raw material, electronic engineering, firmware/software development, product testing, and packing
design. Our experienced strategic supply systems offer a robust and dependable manufacturing capacity for orders of
various sizes.

Limited Warranty

KLT provides the following limited warranty if you purchased the Product(s) directly from KLT company or from KLT’s
website, www.KaiLapTech.com. Product(s) purchased from other sellers or sources are not covered by this Limited
Warranty. KLT guarantees that the Product(s) will be free from defects in materials and workmanship under normal use
for a period of one (1) year from the date you receive the product (“Warranty Period”).

For all Product(s) that contain or develop material defects in materials or workmanship during the Warranty Period, KLT
will, at its sole option, either: (i) repair the Product(s); (ii) replace the Product(s) with a new or refurbished Product(s)
(replacement Product(s) being of identical model or functional equivalent); or (iii) provide you a refund of the price you
paid for the Product(s).

This Limited Warranty of KLT is solely limited to repair and/or replacement on the terms set forth above. KLT is not
reliable or responsible for any subsequential events.

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.
 CMOS CAMERA MODULES
your BEST camera module partner
KLT Strength

Powerful Factory

Professional Service

Promised Delivery

www.KaiLapTech.com [email protected] Tel: (852) 6908 1256 Fax: (852) 3017 6778

All rights reserved @ Kai Lap Technologies Group Ltd. Specifications subject to change without notice.