Emflon® PFR Filters

High Strength, Long Life Sterilizing Filters for Air and Gas
Features Benefits
} Comprehensive validation } Assures highest removal efficiency and


highest safety margins
} High flow rates and low pressure drop

} Allows use of small systems, reducing
} Robust construction

installation and running costs
} Long steaming life and long service Benefits } Ensures integrity and reliability

} Offers low cost filtration

Description Effective Surface Area

Superior Performance AB1PFR7PVH4 0.8 m2 (8.6 ft2)

Emflon PFR filters provide high assurance of filter integrity and
long life, even during continuous use in hot air up to 60 °C, Cumulative Steam Life3
in vent applications up to 80 °C and during repeated steaming.
Up to 142 °C and 0.3 bar ΔP AB05 AB 1,2,3
This is combined with high flow rates and excellent de-wetting
characteristics resulting in very economical filtration through 100 hours 165 hours
the use of smaller installations and reduced energy costs. 3
The steam life and service life data were determined by testing under
Emflon PFR filters have an absolute removal rating of 0.2 μm controlled laboratory conditions up to the time indicated. Actual operating
conditions may affect the filter’s long term resistance to steam sterilization
in liquids and 0.003 μm in gases and have been validated by:- and hot air service. Filters should be qualified for each process application.
} Brevundimonas (Pseudomonas) diminuta liquid challenge
at 107/cm2 Figure 1
System Air Flow vs. Differential Pressure (AB1 Size Cartridge)
} Brevundimonas (Pseudomonas) diminuta aerosol challenge 600
} PP7 bacteriophage aerosol challenge

Assembly differential pressure1 (mbar)

Assembly differential pressure1 (psi)

550 8
500
} Airborne sodium chloride aerosol challenge at 100 L/min 450
7

flow (0.003 μm rated in gases) 400 6

350 5
Specifications 300
4
250
Materials Of Construction 200 3
150 2
Membrane Double layer hydrophobic PTFE 100
1
Support and Drainage Layers Polypropylene, oxidation resistant 50
0
0 100 200 300 400 500 600 700
Core, Cage, End Caps Polypropylene, oxidation resistant Air Flow Rate (Nm3/h)
Adapters Polymeric, encapsulated in Vent mode 2 bar g inlet
1 bar g inlet 3 bar g inlet
oxygen-resistant polypropylene

Maximum Differential Pressure Ordering Information

Temperature Forward Direction Reverse Direction Em on PFR Part Number: (example: AB2PFR7PVH4)

Up to 40 °C 5.3 bar (76.8 psi) 3.0 bar2 (43.5 psi) AB PFR PV

Up to 80 °C 4.1 bar (60 psi) – O-ring

Code Filter Size Code Module Type Code Material
Steam up to 125 °C 1.0 bar (14.5 psi) 0.5 bar (7.3 psi)
05 127 mm (5 in.) 24 Double O-ring H4 Silicone
Steam up to 142 °C 0.3 bar (4.4 psi) 0.2 bar (3.0 psi) 1 254 mm (10 in.) with bayonet
lock and at
Excursion conditions only
2 2 508 mm (20 in.)
end
3 762 mm (30 in.)
75 Double O-ring
Service Life in Air 4 1016 mm (40 in.) with bayonet
Temperature Service Life lock

60 °C Pressurized Air Typically 12 months

80 °C Vent Service Typically 6 months
4
AB05 Cartridges only, 5AB 1, 2, 3 cartridges only

Visit us on the Web at www.pall.com

E-mail us at [email protected]
Corporate Headquarters International Offices
Port Washington, NY, USA Pall Corporation has offices and plants throughout the world in locations such as: Argentina, Australia, Austria,
+1.800.717.7255 toll free (USA) Belgium, Brazil, Canada, China, France, Germany, India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico,
the Netherlands, New Zealand, Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden,
+1.516.484.5400 phone
Switzerland, Taiwan, Thailand, the United Kingdom, the United States, and Venezuela. Distributors in all major
[email protected] e-mail industrial areas of the world. To locate the Pall office or distributor nearest you, visit www.pall.com/contact.

European Headquarters The information provided in this literature was reviewed for accuracy at the time of publication. Product data may
Fribourg, Switzerland be subject to change without notice. For current information consult your local Pall distributor or contact Pall directly.

+41 (0)26 350 53 00 phone

[email protected] e-mail

Asia-Pacific Headquarters
Singapore
+65 6389 6500 phone
© 2014, Pall Corporation. Pall, and Emflon are trademarks of Pall Corporation.
[email protected] e-mail ® indicates a trademark registered in the USA and TM indicates a common law trademark.
Filtration.Separation.Solution. is a service mark of Pall Corporation.

USD1477b(7)