Luberef Yanbu Refinery Expansion Project
Subject of JHA JHA No. 14 Rev. No. 2
JOB HAZARD ANALYSIS Discipline Rev Date
(JHA) Job Hazard Analysis for Fusion Civil Elec. Struc. Piping
Welding of HDPE Pipe
Other
_______________________________
SSA Discipline Manager SSA Safety Manager SSA Construction Manager
Prepared by Sign Reviewed by Sign A Approved by Sign
ved
Date Date D Date
a
Activity Potential Hazards Preventive Measures Risk Responsible Remarks
Rating Person
Delivery of HDPE Risk From: 1. Only competent operators
1 Vehicle accident shall operate the Vehicle and L Project/Site Regular Site
Pipe and Accessories Manager Inspection.
posses SAG License and third
to the site.
Risk of: party cert.
HSE Supervisor Daily Tool Box
Physical injury and 2. Assign competent workers
Meeting
Damage to property while loading. Site Supervisor
3. Assign flagman to guide the Daily
heavy equipment movement. Foreman Observation
4. Provide pavement marking for
personnel and equipment alley.
5. Barricade the area and post
the sign.
6. Unauthorized person should
not entry the area.
7. Use the appropriate PPE
(gloves, safety shoes, etc.)
1
1. A standby man shall be
Butt Fusion Joint Risk From: assigned by the (CSES) confined L Project/Site Regular Site
Slip and trip while space entry supervisor at each Manager Inspection.
Activities
2 preparing for the designated entry point and shall
continuously monitor the HSE Supervisor Daily Tool Box
job.
confined space entry while Meeting
personnel are inside the confined Site Supervisor
Risk Of: Daily
Physical injury space.
2. Atmospheric gas testing within Foreman Observation
confined spaces shall include,
but not be limited to, testing for
oxygen (O2), flammable
mixtures (Lower Explosive Limit
[LEL]) and toxic gases (e.g.,
H2S).
3. Necessary permits for all
related activities within the
construction site shall be
obtained prior to the
commencement of the job.
Confine space permit shall be
utilized prior to start any work
activities
4. All personnel that will be
involved in this job shall orient
with the nature of that unusual
or unexpected acute hazard
may be happened anytime in
the jointing of HDPE pipe.
5. All workers shall wear proper
safety shoes; safety goggles,
ear protection, safety hats,
safety belts, and appropriate
safety wear in accordance to
site safety requirement.
6. All worker and supervisors shall
maintain good safety practice in
accordance to SAMSUNG safety
requirement at site. Any unsafe
2
Risk From: 1. All personnel involved with the L
3 Removal of Butt Body parts get Butt Fusion Joint shall have Project/Site Regular Site
caught entangled by Manager Inspection.
Fusion, sufficient training and
tools, accessories instruction in the operation of
accessories, tools HSE Supervisor Daily Tool Box
and equipment. the equipment and the risk
and equipment. Meeting
involved. Site Supervisor
Falling from height. 2 Butt Fusion Joint areas shall Daily
be barricaded and proper Foreman Observation
Slip and trip signage shall be in place to
prevent unauthorized
personnel’s entry.
Risk Of: 3. Always use proper PPE, such
Physical as safety helmet, goggles and
injury/Damaged to non-skid safety shoes etc.
property 4. Ensure that your permit to
work has been signed and
approved by concerned parties
3
Risk From: 1. Remove all nails from L
4 Hygiene/ Slip and trip dismantled/unused timber – Project/Site Regular Site
where not possible then Manager Inspection.
Housekeeping
hammer flat.
HSE Supervisor Daily Tool Box
Risk Of: 2. Clean up waste as it is
Meeting
Physical injury created; small waste can be Site Supervisor
bagged, larger waste stacked Daily
and then skipped as soon as is Foreman Observation
practicable.
3. Beware muddy sites - these
will greatly increase risk of
slips. Keep footwear as clean
as is reasonably practicable;
ensure loose mud is removed
prior to climbing ladders, etc.
4. Try and allocate a set period
each day to general
housekeeping possibly at the
end of the day
