Horizontal axis wind turbine generator
www.engelecenergy.com
EN-20KW-E Technical Datasheet
Part No: EN-20KW-E
Description: The EN-20KW-E use permanent magnetic generator, has high-efficient energy output, is the
most compact, safe and reliable horizontal axis wind turbine. The EN-20KW-E wind turbine
is widely used in garden, park, farm, island and open areas. It can supply stable & sufficient
electricity for the private consuming or selling to electricity grid. The EN-20KW-E wind
turbine is also easy to integrate with solar panels to create hybrid generating systems.
Design
1) The EN-20KW-E uses the special designed PM generator with low loss, best magnetic flux density. The special stator design
reduced the torque dramatically and it help the generator start working at a low cut-in wind speed.
2) The EN-20KW-E use the reinforced fiberglass blades with optimized aerodynamic structural design, it help the turbine increase the
working efficiency and wind energy utilization.
3) The rudder adopts automatic yaw design, it makes the turbines automatically and accurately align with the windward direction.
This design can increase output power and the ability of resisting terrible weather.
4) The EN-20KW-E can withstand winds up to 45m/s by a passive aero-dynamic design. Entirely moulded wind turbine body ensures
the consistent quality and reducing the vibration and noise.
5) Adopting intelligent tracking technology of power generating, effectively regulating current and voltage, and high conversion rate,
over load protection of power generation
Advantage
High outputs
23KW max. power
Intelligent
.了
A Intelligent tracking technology to regulating the efficiency
Reliable
Precision engineer design & entire moulded components
Durable
Withstands storm force winds up to 45m/s, service life>10 year
Generator
High quality, full copper coil, permanent magnetic
Feature Small shape, easy to install and maintain
EN-20KW-E Wind Turbine EN-20KW-E wind turbine power curve
Turbine diameter : 10 meter
Control system : Electronically controlled yaw protection
Blade material : Reinforce fiber glass
Rated output : 20KW at 10m/s
Peak output : 23KW
Cut-in speed : 2.5m/s
Speed regulation : Electronically controller yaw
Rated voltage : 220V/360V
Generator type : Permanent magnet generator
* Wind turbine performance is subject to many factors. All output data contained in this document is indicative and actual turbine outputs will depend on
the prevailing site and installation conditions.
ENGELEC ENERGY
Intelligent manufacturing, Industry5.0
Email:[email protected]
www.engelecenergy.com
