PRODUCT NAME:

HERO SUPER PREMIUM INTERIOR EMULSION SINCE 1902

HERO
SUPER PREMIUM
INTERIOR EMULSION

Experience the pinnacle of innovation and protection with HERO, the ultimate choice for discerning
homeowners looking for a feature loaded product at budget friendly prices. Our paint combines a
host of cutting-edge features, setting it apart from traditional options in the market.
Choose HERO where uncompromising quality meets exceptional performance.

PRODUCT BENEFITS

zero voc

BEST IN CLASS ACTIVE STAIN GUARD ANTI-VIRAL ZERO VOC BRIGHT COLORS
WASHABILITY TECHNOLOGY FORMULA WITH ASSURANCE & HIGH SHEEN
SILVER ION TECHNOLOGY

P R O D U C T F E AT U R E S

 

LOW MEDIUM HIGH EXCELLENT
   

   

  @ 30°C IF STORED IN A DRY SEALED CONTAINER AT
  SHADED CONDITION.

  

 5 Years    

   

 SHEEN SOFT SHEEN HIGH SHEEN SMOOTH   

   


  220
Sq Foot/Liter/ coat.    
      

      

          
    

*Finish - High sheen as compared to other emulsions at this price point.

**Coverage - Actual coverage may vary as coverage depends on method and condition of application as well as surface roughness and porosity.
HERO SUPER PREMIUM
INTERIOR EMULSION
SINCE 1902

A P P L I C AT I O N D E TA I L S
Surface Preparation
• Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking
paint, laitance, algae, fungi etc. and wipe it clean.

Primer
• Apply coat of Shalimar Water Thinnable Cement Primer / Super Water Thinnable Cement Primer / Seal Proof as per
recommendation. Allow it to dry for 3-4 Hrs or apply coat of Shalimar Universal White Primer as per
recommendation. Allow it to dry 6-8 hrs.
• Spot prime before and after filling nail holes / cracks.

Putty (if required)

• Level the surface with Shalimar Magic Acrylic Wall Putty or Shalimar Shakti Wall Guard Putty and allow it to dry for
4-6 hrs.
• Sand surface with 180/320 emery paper and wipe it clean.
• Apply an additional coat depending upon the surface conditions and smoothen the surface.

Primer
• Apply coat of Shalimar Water Thinnable Cement Primer / Super Water Thinnable Cement Primer / Seal Proof as per
recommendation. Allow it to dry for 3-4 Hrs or apply coat of Shalimar Universal White Primer as per
recommendation. Allow it to dry 6-8 hrs.

Top Coat
• Thin Shalimar Paints Hero Super Premium Interior Emulsion with potable water, 40% to 50% by volume.
• For dark shade, thin Shalimar Paints Hero Super Premium Interior Emulsion with potable water 25%-30% by volume.
• Apply 2 coats of the emulsion with an interval of 4-6 hrs.
• Application can be done by brush, roller or spray.
• For dark shades, an additional coat is recomended.

Application Surfaces
• All kind of well-prepared plasters, concrete and masonry surfaces.

PRECAUTIONS

• Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of
application.
• Do not apply when humidity is greater than 90%. It may cause prolonged drying time of paint and moisture
condensation on the walls.
• Do not over-thin or over-extend the brush.
• Tint using Shalimar Paints machine colorants only.
• Stir well and strain before use.
• Tinted shades need thorough shaking immediately after colourants addition as well as before use.
• For best performance, ensure that the surface is dry. On moisture meter, the reading should be below 16%. In case it
is above that, find out the source of water and address it before painting.
• For better washability ensure the paint surface is cured for 2 weeks under normal atmospheric conditions (30°C ; 50 -
60%RH].
• Application of Acrylic Wall Putty and adherence to the painting system is mandatory for best results.

S A F E TY F E ATU R E S

• Kindly refer to the MSDS for detailed information on safety measures while handling the paint, which is available on
request.
• Store the container with the lid tightly closed in an upright position, in a cool, dry place.
• Keep out of reach of children and away from eatables.
• May be harmful, if swallowed. In case of ingestion seek immediate medical attention.
• Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
• In case of skin contact, immediately wash skin with soap and plenty of water. Get medical attention if irritation
develops or persists.
• Do not breathe vapour or spray. It is recommended to wear suitable nose pad during sanding and surface preparation
to avoid dust inhalation.
• Left-Over Material Disposal: Left-over material/drums should not be disposed in soil/drains. Consumers should
consult a local recycling agency for proper disposal of paint/drum.
• In the event of spills, contain spillage using sand or earth.
• No added Lead, Mercury or Chromium compounds.