Instructions for the Pinpoint Stimulation Design

Spreadsheet
HydraJet Calculations RETURN
Purpose

The purpose of the HydraJet Calculations sheet in this workbook is to calculate the jetting time
needed to cut a specified distance into the formation before breakdown. These calculations
include a correlation based on work done by Pekarek, Lowe and Huitt and presented in a paper in
1963 (SPE #421). The correlation relates the velocity of both the fluid and the particles in the
abrasive jet to the impingement velocity and subsequent erosion of the pipe wall and formation
rock. All input cells are highlighted in blue. All results cells are highlighted yellow. The final
results of this sheet are intended to help design the jetting stage size for a CobraMax or SurgiFrac
treatment.
Select from the dropdown menu the appropriate tool. These tools are based on currently
Step 1 available sizes, although custom sizes can be produced as needed. The program uses the
O.D., I.D. and number of holes in the selected tool for velocity and jet calculations.
Select from the dropdown menu the O.D. of the casing the HydraJet tool will be cutting
Step 2
through.
Select from the dropdown menu the casing grade. The program uses this in the calculations
Step 3
for jetting through different types of steel.
Select from the dropdown menu the casing weight. The program uses this to determine the
Step 4
I.D. of the pipe for the jetting time calculations.
Enter the desired depth you wish to penetrate past the O.D. of the casing. If unsure of what
Step 5
number to use, click the "Reset to Default Values" button to enter the default value.
From the dropdown menu, select the nozzle size you wish to use. Remember that not all of
Step 6 the sizes available in the menu are available. Only 1/8", 3/16", and 1/4" nozzles are currently
used.
Enter the desired number of nozzles you with to use in the tool. If you choose too many a
Step 7 warning message will indicate you need to lower the number. It may take several iterations
between nozzle size, number, and pumping rate to get the desired differential pressure for
jetting.
Enter the discharge coefficient value of your choice. The default value is 0.9 and is based on
Step 8
a new set of the newly redesigned jet inserts.
Enter the flow rate in the tubing. A good beginning guess is 1 BPM / nozzle. Remember,
Step 9 2,000 - 3,000 psi is good for jetting on a CobraMax job, but around 5,000 psi is needed for a
SurgiFrac procedure.
Enter the base fluid density of the jetting fluid. The program uses this in the differential
Step 10
pressure and jetting time calculations.

Step 11
Enter a sand concentration. The default (and most widely used) concentration is 1 lb/gal.
 From the dropdown menu, select the proppant being used for jetting. Most of the proppants
available in the Materials Library have been entered into this spreadsheet along with the data
Step 12 for each proppant needed to calculate jet solid velocities, jetting times, fluid densities, etc.
This data has been hidden to protect this data from general release. Sorry, but I had to
promise. If your proppant is not available in the list, choose the next closest proppant in terms
of size, mesh, and density. The calculations should still be close.
Results
The most important things to look at from this sheet are the differential pressure being generated, the
recommended jetting time and the volumes needed. Again, it may take several iterations to achieve the
desired affect. There is also an indicator that lets you know when bridging is likely to occur across the
jets.

Velocity Calculations RETURN

Purpose

The purpose of the Velocity Calculations sheet in this workbook is to ensure that the job can be performed
safely and with a minimum of erosion on the treating lines or tubulars. Volumes and areas are also
calculated. All input cells are highlighted blue. All results cells are highlighted yellow. The velocities
calculated and limits are based on current best practices and cannot be changed. If a velocity exceeds its
recommended limit, the cell for velocity will highlight to indicate this. As you progress through the sheets
note that more and more of the data used in a sheet relies on data entered on previous sheets. If, for
instance, the tubing rate needs to be changed on the Velocity Calculations sheet, then you must go back
to the HydraJet Calculations sheet to do so.
Enter the Coiled Tubing O.D. If the treatment is being performed down jointed pipe, the O.D.
Step 1 of this pipe may be entered, but the results do not include velocities around joints.

Step 2 Enter the Coiled Tubing wall thickness. Wall thickness of jointed pipe can also be entered.

Enter the I.D. of the Coiled Tubing swivel. This is the inlet port on the Coiled Tubing unit that
allows the unit to move pipe in and out of the well while pumping. If Coiled Tubing is being
used, it is important to know the swivel I.D. Most units have a 2 inch swivel that is normally
Step 3 too small for fracturing rates. A 3 inch swivel is recommended for SurgiFrac operations.

Enter the Coiled Tubing Jetting depth. This is from the reference point on the well at surface
to its run-in depth where the volume calculations are performed. Also note that this depth can
Step 4 be different than the Perforation Depth so that coil movement is taken into account.
Enter the Total Coiled Tubing on Reel. This length is BEFORE running in hole. It is an
Step 5 important number not only for volumes, but for the friction calculation as well.

Enter the Flow Rate Down the Annulus. This is mainly for velocity concerns on a CobraMax
Step 6 treatment, but is also useful on SurgiFrac and certainly SurgiFrac AP treatments.

Enter the I.D. of the Flow Cross Inlets. This is the MINIMUM I.D. of the inlets to the wellhead
Step 7 configuration on the annular side. This value must be known for accurate calculations.
Enter the Number of Inlets. This splits up the velocity equally between inlets in the velocity
Step 8 calculations.
Enter the BOP I.D. This is the MINIMUM I.D. for any wellhead configuration that "sees" fluid
Step 9 flow.
Step 10 Enter the Depth to the Top of Current Perforations. This is for a total well annular volume.
Results
The Results of this sheet include:
Velocities around and through the tubing.*
Velocities through the Coiled Tubing Swivel.*
Velocities around and through the HydraJet Tool assembly.*
Impingement velocity on the Coiled Tubing through the Flow Cross.*
* - Each of the velocity cells will highlight if the recommended limit is exceeded.
Area calculations based on entered data for reference.
Volume Calculations based on entered data for reference.

Erosion Graphs RETURN

Purpose

The purpose of the Erosion Graphs sheet is to give a visual demonstration of the jet impingement
calculation and a comparison of the results to empirical data from the Halliburton HydraJet manual. The
Fluid and Proppant Velocities from Center graph represents the results of the correlation used to
calculate the velocities of both the fluid and aggregate as it moves through the jet, annulus and wellbore
wall. These velocities are then used to calculate the erosion speed and jetting times. The three graphs
below represent the jetting erosion speed calculated from the correlation and are overlaying graphs from
the HydraJetting Manual. Depending on the casing size and differential pressure, the graph closest to the
simulated conditions should closely match with the calculation.
Sand Plug Calculations RETURN
Purpose

The purpose of the Sand Plug Calculations sheet is to help determine the size of the last sand stage that
needs to stay in the wellbore in order to set the sand plug required for the next zone's treatment. This
sheet's graphic also indicates when the final proppant stage is above the tool after a shut down and when
the tool is likely to become stuck during the sand plug setting stage.
Enter the Plug Back Total Depth or the Depth of the last Sand Plug. All sand volume
Step 1 calculations work from this reference depth.
Enter the Desired Top of Sand. This is used to calculate the volume required to fill, unless the
Step 2 override proppant volume is used, in which case this cell blacks out.

Enter the Average Proppant Concentration in Well. Typically, you will wish to use the
proppant concentration of the last sand stage in the design. The proppant used in the
calculations is the one selected on the HydraJet Calculations sheet. If you desire to change
Step 3 this you must go back to the HydraJet Calculations sheet and re-select a proppant type/size.
Step 4 Enter the Current coil depth. This has been added for flexibility and quick calcs.

* If desired, you may enter a rate, pressure response and estimated viscosity of fluid moving
through the proppant plug to estimate it's height. This height is calculated based on the
assumption that the top of the last set of perforations is taking the fluid. You must have a
known treating pressure of this formation and have confidence that you are not displacing the
sand plug into the formation. The GC sand height us using a Gulf Coast correlation while
Darcy is using Darcy's law of flow through a porous media.
** If desired, you may override the calculations by entering a weight of sand in the blue cell
next to the calculated value. This overrides all calculations and gives new estimates for the
height and volume of the plug. The cell below the blue entry cell is the new estimated top of
sand.
Results
Proppant Required for Plug in pounds and also in cubic feet.
The clean volume required to pump the calculated proppant at the desired concentration.
The dirty volume of the sand plug stage.
The height of the sand at ISIP. This is used to indicate that sometimes the tool is still below
sand after shut down. While this usually does not cause a problem, bridging and sticking
could occur. The graphic helps to indicate the possibility. Light brown sand is still in slurry
and before settling. Dark brown is settled sand.

Depth of the last sand stage at ISIP.

Min. Nozzle Dia. RETURN
The Min. Nozzle Dia. Sheet in this workbook is intended to be used as a quick reference for
Purpose bridging of aggregate on the nozzles. The data is gathered from an article by John E. Smith in
World Oil, June 1991. A certain minimum size orifice is recommended based on both
proppant concentration and size. The HydraJet Calculations sheet also has indicators that
BHA's
Purpose RETURN
The purpose of the BHA's sheet in this workbook is for a quick reference of part numbers for
all tools and tool elements associated with Pinpoint Stimulation.

SurgiFrac Proppant Dilution RETURN

Purpose

In SurgiFrac operations, the contribution of the annulus rate not assumed to be controlling
leakoff must be taken into account for calculating the proppant concentration actually going
into the formation. This sheet gives a straight calculation based on input estimations for
leakoff rate and annulus and tubing rates based on inputs from other pages.
Enter an estimated leakoff rate in the annulus. This number is very hard to estimate and can
Step 1 only truly be found with a pre-stage injection/step-up test.
Step 2 Enter the proppant concentration you wish to see the dilution calculations for.
Results
Some of the results from the proppant side are:
Clean rate at the blender
Slurry density at the blender
Sand rate at the blender
Proppant concentration in the fracture (after dilution)

Slurry density in the fracture (after dilution)

SurgiFrac Acid Dilution RETURN

Purpose

In SurgiFrac operations, the contribution of the annulus rate not assumed to be controlling
leakoff must be taken into account for calculating the concentrations of dilute additives such
as acids and salts actually going into the formation. This sheet is intended to give great
flexibility in salt and acid concentrations both in the annular fluid and tubing fluid. It is based
on input estimations for leakoff rate and annulus and tubing rates based on inputs from other
pages.

Enter a rough estimation of the bottom hole treating temperature for base fluid density
Step 1 calculations.
Step 2 Enter the material concentrations for both the annular and tubing fluid.
Results

The results of these density calculations are based on correlations created by Marten Bruijse
for use in the mix.xls spreadsheet to calculate the fluid density for brines and acids. This
spreadsheet goes a step further and does mixing calculations downhole for a Pinpoint
stimulation treatment. The final fluid concentrations are based on % by weight of solution for
the acids and % by weight of water for the brines. The final concentrations are accurate to
less than .1% and the final density is accurate to less than .01 ppg according to Marten Bruijse
for the following limits:
► The assumption is that the HF acid concentration is made using ABF.
► The acetic acid concentration is valid for concentrations < 40%
► The formic acid concentration is valid for concentrations < 40%
► There is no density data for glycolic acid. Therefore, acetic acid properties were assumed.
► NH4Cl has a maximum concentration of 24%
► NaCl has a maximum concentration of 26%
► NaBr has a maximum concentration of 40%
► KCl has a maximum concentration of 24%
► CaCl2 has a maximum concentration of 40%
► AlCl3 has a maximum concentration of 55%

These calculations will also be used in the hydrostatic calculation for treating pressure.

Flowback RETURN
Purpose

The purpose of the Flowback sheet in this workbook is to determine the flowrate of either gas
or fluid through various sizes of chokes and at pressures ranging from 100-10,000 psi.
Step 1 Enter a gas gravity. A beginning estimated range should be between 0.65 - 0.7.
*You may enter a new discharge coefficient and specific heat ratio if they are known.
Step 2 Scroll down to enter a flowback fluid density for the water flowback table.
Results
The results of pressure vs. flowback rate can be seen by scrolling through the tables or down
to the graphs.

Design Schedule RETURN

Purpose

The purpose of the Design Schedule sheet is to lay out a beginning summary of the job
schedule, by stages for pricing. This sheet incorporates my best efforts at calculating tubing
and annulus treating pressures as well as volumes and proppant weights. A user has the
ability to enter up to 100 stages. A "free" sheet has also been added so that the user can
build a tailored report to fit any need. A job plot has also been added to help visualize the
treatment schedule and give an indication of time. PLEASE NOTE: The friction calculations
currently only work when the sheet is set to "English" units.
Enter the base fluid and acid densities for hydrostatic calculations. These densities are
Step 1 independent for flexibility of the spreadsheet. If the fluid chosen is "fresh water", the density is
8.337 lb/gal by default.
Enter the Tubing schedule. All proppant types per stage can be filled in from the 1st stage as
Step 2
a reference by hitting the "Fill Down" button.
Enter the Annulus schedule. All proppant types per stage can be filled in from the 1st stage
Step 3 as a reference by hitting the "Fill Down" button. Please note that the volumes for tubing and
annulus are not linked and must be matched using the calculation buttons.
 Click the appropriate button to calculate the tubing volumes to match the annulus dirty stage
Step 4 volumes (CobraMax) or to calculate the annulus volumes to match the tubing dirty volumes
(SurgiFrac).
Results
The results from the schedule currently include:
► Tubing dirty stage volume.
► Tubing Stage Proppant Weight.
► Tubing Cumulative Proppant Weight.
►
Maximum Tubing Pressure per Stage. Tubing pressure is dependent on a "best guess" at the
current hydrostatic pressure in the wellbore, the nozzle pressure drop, a "best guess" at tubing
friction, and an entered BHTP gradient. These guesses are made based on tubing and casing
sizes entered on the HydraJet Calculations sheet. Note that this pressure is ONLY a best
guess and should be confirmed using stimulation design software.
► Maximum Nozzle Pressure Drop per Stage. This is the same calculation used on the
HydraJet Calculations sheet, but with the current rate base fluid density and proppant type
and concentration.
► Annulus Dirty Stage Volume.
►
Annulus Stage Proppant Weight.
► Annulus Cumulative Proppant Weight.
►
Maximum Annulus Pressure per Stage. This is base on a "best guess" at annulus friction and
hydrostatic pressure to the top perforation specified in the Velocity Calculations sheet.
► Stage Time. Stage time is dependent on the tubing or annulus, whichever has the highest
rate.
RETURN
RETURN

RETURN
 HydraJet Calculations

HELP
Required Data Reset to Default
English 0 English Values
Metric HydraJet Tool 3.4
3.40" O.D. - 10 Hole Helical Jet Nozzle Size (in) 3/16
Design Casing Size (in) 4.500
4.500 Number of Nozzles 8
Casing Grade 2.500
P-110 Cd 0.85
Casing Weight (lb/ft) 15.10 15.1 Total Tubing Flow Rate (BPM) 8.0 0.1875
Desired Penetration Depth into Formation (in) 4 Base Fluid Density (lb/gal) 8.34 2213.4589
Prop Concentration (lb/gal) 1.0
Specific Volume of Sand 100
0.042467948
Mesh

RESULTS
Internal Diameter of Casing 3.825 in
Jetting Time to Penetrate Steel (min) 2.1 min
Drift Diameter 3.700 in
Pipe Wall 0.337 in
Recommended Jetting Time of a 1 ppg
Standoff Assume Centralized 0.213 in 7.4 min
Stage to Cut Single Perforations (min)
Calculated Time to Notch Formation 5.4 min

Flow Rate Total 336 gal/min 2,394 lb

100 Mesh needed based on the
Flow Rate Each Nozzle 42.0 gal/min calculated jet time.
20.68 sacks
Density of Fluid with Sand 8.96 lb/gal
Sand Rate 322 lb/min 2394 gal
Clean Fluid Volume for Jetting.
Flow Rate Base Fluid 322 gal/min 57.00 bbl
Pressure Drop through each Nozzle 2,381 psi 2496 gal
Total Jetting Fluid Dirty Volume
Nozzle Exit Velocity 488.0 ft/s 59.42 bbl
 Velocity Calculations

Tubing Calculations Annulus Calculations

8.00 BPM 25.000 BPM
Flow Rate Down Tubing 336.0 gpm Flow Rate Down the Annulus 2.3394 ft3/s
0.7486 ft3/s 1050.0 gpm
Dimensions
Tool OD 3.400 in ID of flow Cross Inlets 4.160 in
Tool ID 1.2 in Number of Inlets (Dual=2, Quad=4, etc) 2
Casing ID 3.825 in BOP I.D. 5.500 in
Tubing OD 1.750 in Minimum I.D. - Casing Restriction 5.500 in
Tubing Wall thickness 0.175 in Depth to Top of Current Perforations 12000.0 ft
I.D. of Coiled Tubing Swivel 3.00 in
Tubing Jetting Depth 12000.0 ft
Total Coiled Tubing on Reel 15000 ft
Velocities

Velocity Max Velocity Max

(ft/s) Velocity Max Rate (ft/s) Velocity
(ft/s) (BPM) (ft/s)
Velocity Through Coil ID 70.03 35.0 4.00 Velocity Impinging on the Coil 12.39 20.0
Velocity through Swivel 15.25 35.0 18.36 Velocity through BOP Annulus 15.78 20.0
Velocity in ID of Tool 95.32 80.0 6.71 Velocity in Annulus of Casing and CT 37.08 35.0
Maximum Rate Through Coiled Tubing 4.00 Velocity through Restriction by OD of CT 15.78 35.0
Velocity in Annulus by Tools 139.69 60.0
Maximum Treatment Rate Based on Velocity
Areas
Area through Coiled Tubing ID 1.539 in2 Area through Inlets 27.184 in2
Area through Swivel ID 7.069 in2 Area of Annulus through BOP 21.353 in2
Area through ID of Tool 1.131 in2 Annulus Area between Casing and Coiled Tubing 9.086 in2
Annulus Area between Casing and BHA 2.412 in2
Area of Casing I.D. 11.491 in2
Area of Casing Restriction 21.353 in2
Volumes
28.56 bbl 134.85 bbl
Total Coiled Tubing Volume
1199 gal Volume of Annulus between Casing and Coiled 5663 gal
22.85 bbl Tubing to Tubing Reference Depth 0.01124 bbl/ft
Volume of Coiled Tubing ID 960 gal 11.2371 bbl/1000ft
from surface to Reference
Depth 0.00190 bbl/ft 134.85 bbl
1.9039 bbl/1000ft Volume of Annulus + Casing to Top of Current 5663 gal
35.70 bbl Perforation Depth 0.01421 bbl/ft
Volume of Coiled Tubing OD 1499 gal 14.2120 bbl/1000ft
to Reference Depth 0.00297 bbl/ft
2.9749 bbl/1000ft
HELP

Fluid and Proppant Velocities from

600
Velocity (ft/s)

500

400

300

200

100

0
0 0.5 1 1.5 2 2.5 3
DistanceVL VP
from Center (
Penetration Depth (in)

Figure 1 is a velocity profile of both the base fluid and proppant, demonstrating how they accelerate throught the no

10

9
Penetratio
10

3
0 2 4 6 8 10 12 14 16 Time (min)
18 20 22 24 2
Penetration Depth (in)

Figure 2 is an overlay comparing the theoretically derived penetration rate to emperical data from the Halliburton H
This example is for 1.5 ppg sand in jelled water at 2,000 psi pressure drop through 1/4 in nozzles.

10

5
 8

3 Time (min)
0 10 20 30 40 50
Figure 3 is an overlay comparing the theoretically derived penetration rate to emperical data from the Halliburton H
This example is for 1ppg sand in jelled water at 1,000 psi pressure drop through 3/16 in nozzles.
Penetration Depth (in)

10

2 Time (min)
0 10 20
 4

2 Time (min)
0 10 20

Figure 4 is an overlay comparing the theoretically derived penetration rate to emperical data from the Halliburton H
This example is for 1.5 ppg sand in jelled water at 3,000 psi pressure drop through 3/16 in nozzles.
ocities from Center

2.5 3 3.5 4 4.5 5

eVL VP
from Center (in)

accelerate throught the nozzle and slow at different rates.

e
20(min)
22 24 26 28 30 32 34 36 38 40
ata from the Halliburton HydraJet Manual.
(min)
0 50 60 70 80
ata from the Halliburton HydraJet Manual.

20 30 40
 20 30 40

ata from the Halliburton HydraJet Manual.

 Sand Plug Calculations

HELP
Reset to Default Values
Required Data Proppant Data
PBTD or Depth of Last Plug 12680 ft Proppant Type 100 Mesh
Desired Top of Sand Plug 11800 ft Absolute Volume 0.04247 gal/lb
Average Proppant Concentration in Well 8.00 lb/gal Bulk Density 115.8 lb/gal
CURRENT Coil Tubing Depth 11000.00 ft Plug Material Requirements
Tubing Size 1.750 in Top Perforation Depth 12000 ft
Tbg Vol Factor 0.01069 ft3/ft End of Tbg ( EOT ) 11000 ft
Casing Size 4.5 in Proppant Required for 70.22 ft3
Casing Volume Factor 0.07979 ft3/ft Plug 8128 lb 0 9381

Annulus Volume Factor 0.06309 ft3/ft 1016 gal 11800

Clean Plug Volume
9381

Estimated Sand Height Above Perforations 24.2 bbl 9381

Pump Rate through Sand Plug at

1361 gal
Pressure 3.1449 BPM
Dirty Plug Volume 11000

∆P - Estimated Differential Pressure

32.4 bbl
Across Sand Plug 218 psi 11000

Estimated Fluid Viscosity in Sand Plug 2619 ft

2 cp Height of Sand at ISIP 11000

GC Estimated Sand Height Above Depth of Last Sand 9381 ft

Perforations 0.0 ft Stage/Flush at ISIP 12000

Darcies Equation Height Estimate 0.1 ft Volume of Flush 4427 gal

Estimated Particle Settling Based On SPE 26121
 BHA's Halliburton Confidential

HELP Double Slip Connector

Description 1 3/4-in. CT OD 2-in. CT OD 2 3/8-in. CT OD 27/8-in. CT OD
Tool Part No. 100071122 101310839 101312314 100071144 101317095 101215821 101327409 101302063b 101204481 1.01E+08 101285527 101324943
OD (in.) 2.594 3.2 2.88 2.75 3.2 3.09 3.09 3.2 3.6 3.6 3.6 3.8
ID (in.) 1.5 1.5 1.38 1.75 1.75 1.99 1.38 1.75 2.44 1.75 2.43 1.75
Makeup Length (in.) 13.32 8.91 9.53 13.85 9.77 14.24 11.23 10.39 13.43 10.65 13.43 11.48

23/8 -in. 27/8 -in.

2 3/8-in. EUE, 8-rd 2 3/8 -in. EUE, 8-rd 2 3/8 -in. IF 23/8 -in. 23/8 -in. IF 23/8-in. 27/8 -in. EUE 23/8 -in. IF
Bottom Connection 2 3/8 -in. IF Pin 2 3/8-in. PAC Pin EUE, 8-rd EUE 8-rd
Tubing Pin Tubing Pin Pin PAC Pin Pin IF Pin 8-rd Tubing Pin Pin
Tubing Pin Tubing Box

Service Rating H2S Std. H2S H2S Std. H2S H2S Std. H2S Std. H2S H2S
Tensile Rating (lb) 52,000 63,000 63,000 55,000 70,000 81,000 81,600 134,000 100,000 100,000 100,000 140,000
Pressure Rating (psi) 10,000 17,000 12,900 7,500 17,000 8,200 8,200 15,000 9,000 10,000 9,000 10,000
Torque Rating (lb/ft) 1,270 1,270 1,270 1,800 1,800 1,800 2,380 2,600 2,900 2,900 2,900 2,380
Nut 698.24592 698.24592 698.24592 698.24603 698.24603 698.24645 698.24645 101302060 698.24695 698.247 698.24695 101325156
Center Sub 698.24582 698.24582 698.24582 698.24632 698.24632 698.24644 698.24644 101302061 698.24694 698.2469 698.24694 101325080
Bottom Sub 698.24583 101310837 101311984 698.24633 101317141 101215765 101327412 101302062 698.24692 1.01E+08 101285528 101324977
Lock Ring 698.24593 698.24593 698.24593 698.24504 698.24504 698.24643 698.24643 100071153 698.24693 698.2469 698.24693 101204569
O-ring 600.34021 600.34021 600.34021 600.34023 600.34023 600.33974 600.33974 600.33974 600.33978 600.3398 600.33978 100003923
Backup Ring 698.24594 698.24594 698.24594 698.20053 698.20053 N/A N/A N/A N/A N/A N/A N/A
213/16-in.- 213/16-in.- 2 7/8-in.- 35/16-in. 35/16-in. 313/32-in.
21/2-in.- 35/16-in. 10-
Nut Thread 23/16-in.-14UN 23/16-in.-14UN 23/16-in.-14UN 21/2-in.-12UN 10-stub 10-stub 10-stub 10-stub 10-stub 10-stub
12UN stub ACME
ACME ACME ACME ACME ACME ACME
Nut OD 2.44 2.44 2.44 2.75 2.75 3.09 3.09 3.2 3.6 3.6 3.6 3.8

Redress Kit Part No. a 698.24581 698.24581 698.24581 698.24631 698.24631 698.24641 698.24641 698.24641 698.24691 1.01E+08 101204528 101204528
a
Redress kits include O-rings, backup rings, and lock rings.
b
This connector has a 5° internal taper in the top of the nut.

Shear Disconnect
SAP No. 101308640 101298 95367
OD (in.) 3.2 2.94 3.63
ID (in.) 1.75 1.96 2.441
Make-Up Length (in.) 9.37 12.49 12.35
2 3/8 -in. EUE 2 7/8 -in. EUE 8
Top Connection 2 3/8 -in. API IF box
8 rd box rd box
2 3/8 -in. EUE 2 7/8 -in. EUE 8
Bottom Connection 2 3/8 -in. API IF pin
8 rd pin rd pin
Shear Screw Part No. 100005755 100005755 100005755
Max. No. of Screws 10 8 8
O-Ring Part No. 100001988 100006583 100006587
Fishing Profile 3 1/2 GS internal Overshot only Overshot only

Centralizer
Thread
Part No. Casing Size (in.) Max. OD (in.) ID (in.) Make-Up Length (in.)
Connections
2 3/8 - in.
101301835 4.5 3.85 1.75 8.13
API IF
2 3/8 - in.
101309111 4.5 3.85 1.75 24.13
API IF
2 3/8 - in.
97680 4.5 3.942 1.937 8.35
EUE 8rd
2 3/8 -in.
129850 4.5 3.852 1.937 8.35
EUE 8rd
2 3/8 - in.
101308525 5.5 4.75 1.75 8.13
API IF
2 3/8 - in.
101310885 5.5 4.75 1.75 24.13
API IF
 BHA's Halliburton Confidential

2 7/8 - in.
99415 5.5 4.862 2.375 10.61
EUE 8rd
2 7/8 - in.
97679 5.5 4.742 2.375 10.61
EUE 8rd
3 1/2 - in.
90370 7 6.216 2.75 11.61
EUE 8 rd

Knuckle Joint
Thread
Make-Up Articulation Pressure
Part No. OD (in.) ID (in.) Tensile Rating (lb) Connectio
Length (in.) Angle Rating (psi)
ns
2 3/8 - in.
101304461 3.20 1.75 11.56 110,000 5º 15,000
API IF

Blast Joint
Make-up
Part No. OD (in.) ID (in.) Thread Connections
Length (in.)
101306763 3.20 1.75 12.0 2 3/8- in. API IF
101301748 3.20 1.75 24.0 2 3/8 - in. API IF
101306626 3.20 1.75 48.0 2 3/8 - in. API IF
99756 2.94 1.92 39.3 2 3/8- in. EUE 8rd
95434 3.63 2.44 39.3 2 7/8 - in. EUE 8rd

Ported Sub
Make-Up
Part No. OD (in.) ID (in.) Thread Connections
Length
(in.)

2 3/8 -× 2 3/8- in. API

101301434 3.20 1.88 12.00
IF box in. NU 10rd box

2 3/8-× 2 7/8 - in. API

101303833 3.20 1.88 12.00
IF box in. NU 10rd box

2 3/8-in. EUE 8rd box

125812 3.063 1.966 18.12 × 2 3/8 -in. NU 10rd box

2 7/8-in. EUE 8rd box

125813 3.705 2.350 18.25 × 2 7/8 -in. NU 10rd box

Top Cup Packer

Mandrel OD Mandrel ID (in.) Make-Up Length (in.) Thread
Part No. Casing Size (in.)
(in.) Connections
2 3/8 - in.
101309169a,b,c 4.5 3.50 1.285 16.06
API IF
2 3/8 - in.
101309199a,c,d 5.5 4.40 1.75 16.06
API IF
2 3/8-in. EUE
95382e 4.5 3.668 1.937 18.0
8rd
2 7/8-in. EUE
95344 5.5 4.625 2.38 18.0
8rd
dO-ring is sold
aPacker rings are sold bO-ring is sold cCups are sold eOptional 90 durometer
separately. Order
separately. See Table separately. Order SAP separately. See cup for this packer is
SAP No.
11.8.B. No. 100001960. Table 11.8.C. Part No. 186958.
100001961.

Packer ring selection

Casing Size (in.) Casing Weight (lb/ft) OD (in.) Packer Ring
50 Duro 70 Duro 80 Duro 90 Duro
100070000 100012497
9.5 to 10.5 3.71 N/A (696.50034) —
(696.50022) (696.50018)
4 1/2
 BHA's Halliburton Confidential
4 1/2
100009397 100004002
11.6 to 13.5 3.54 N/A (696.51034) —
(696.51022) (696.51018)
13 to 14
100009391 100003941 100012412
5 1/2 15.5 4.6 —
(695.08201) (695.08195) (695.08199)
17
100070094 100012531
20 to 23 4.4 — —
(696.53725) (696.53723)

Cup Selection
Casing Size Casing Weight Cup
(in.) (lb/ft) 70 Duro 85 Duro
100009387 100009390
9.5 to 10.5
(694.94011) (694.94064)
4 1/2
100003936 100009388
11.6 to 13.5
(694.94012) (694.94013)
100009389
13 to 14 N/A (694.94065)
(694.94019)
100003939 100003938
5 1/2 15.5
(694.94023) (694.94022)
17 100012394
—
20 to 23 (694.94025)

RR4-EV Packer Specifications

Weight Range Packer
Part No. Casing Size (in.) Max. OD (in.) Make-Up Length (in.)a
(lb/ft) Elementb
101207099 4.5 9.5 to 11.6 3.75 46.97 —
101251733c 5.5 13 to 23 4.67 46.24 —
For work inside 17- to 23-lb/ft
c
a
Make-up length does bPacker rings must be casing, order shoe SAP No.
not include the ported ordered separately. See 100014056 and wedge SAP No.
sub length. Table 11.9.B. 101252993 separately. Quantity
one of each is required.
Packer ring selection
Packer Ring
Casing Size (in.) Casing Weight (lb/ft) OD (in.) (1 req.) 60 Duro 65 Duro 75 Duro 85 Duro 95 Duro
50 Duro
100014066
100005025 100077733 100005026 100005024
4 1/2 9.5 to 11.6 3.75 (838.95216 —
(838.95217) (838.95222) (838.95226) (838.95211)
)
100077696
100014058 100014057 101251589
5 1/2 13 to 23 4.42 — — (838.93516
(838.93531) (838.93511) (838.93514)
)

SurgiFrac Jet Bodies

Max. Rate-
Make-Up Length Thread
Part No. OD (in.) Min. ID (in.) Number of Holes Phasing Min. OH Min. Liner Max. Liner Max. OH Max. Rate- Prop Max. Rate (only
(in.) Connections
ID ID ID* ID* Prop Frac** Frac*** Jetting sand)
2 3/8 -in.
101252146 3.06 1 14.25 10 Helical
EUE 8rd 3.3 3.6 5 5.5 6 7 9
2 3/8 -in.
101252136 3.06 1 17.25 9 120°
EUE 8rd
2 3/8 -in.
101252143 3.06 1.1 22.25 10 180°
EUE 8rd
2 3/8 -in.
101330284 3.4 1.2 14.25 10 Helical
EUE 8rd 3.75 3.9 5.4 5.75 8 10 12
2 3/8 - in.
101330285 3.4 1.2 13.13 10 Helical
API IF
2 7/8 - in.
101252127 3.66 1.5 14.25 16 90°
EUE 8rd 4 4.25 5.5 5.75 12 15 16
 BHA's Halliburton Confidential

2 3/8- in. API

101323841 3.66 1.5 13.13 16 90°
IF
2 7/8 - in.
101252133 3.66 1.5 20.25 15 120°
EUE 8rd
2 7/8 - in.
101252130 3.66 1.5 28.25 16 180°
EUE 8rd
2 7/8 - in.
101323995 4.5 2.25 16.63 25 72°
API IF
3 1/2- in.
101247141 4.5 2.25 18 25 72°
EUE 8rd 5.3 5.5 6.2 6.5 22 25 35
3 1/2- in.
101252120 4.5 2.25 28 21 120°
EUE 8rd
3 1/2- in.
101252123 4.5 2.25 33 20 180°
EUE 8rd
4 1/2 - in.
101300991 7.5 3.75 27.63 21 Helical
API IF
The jet configuration (location) along the tool body can also effect the internal
HydraJetting Nozzles erosion of the tool body...
Part No. Nozzle Size (in.) Thread * Assumes Centralized Tool
101247257 3/16 ** More than 20,000 # per Jet
1.00-12UNF *** Less than 20,000 # per Jet
101268612 1/4
male
101268616 Blank (no hole) **** Larger sizes can be built on demand… asssume 90 day lead time.

Ball Sub Specifications

Thread
Part No. OD (in.) Min. ID (in.) Ball Size (in.) Make-Up Length (in.)
Connections
2 3/8 - in.
101247256a 3.06 1.19 1.375 10.25
EUE 8rd
2 7/8 - in.
101251668 b
3.66 0.94 1.375 10.25
EUE 8rd
3 1/2 - in.
101251672 c
4.5 1.5 2.125 10
EUE 8rd
2 3/8 - in.
101331279d 3.2 1.06 1.375 13.48
API IF

c
Ball cage (SAP
a
Ball cage (SAP No. b
Ball cage (SAP No.
No. 101251973)
101247249) and ball 101247250) and ball d
Tool comes
and ball (SAP
(SAP No. 101313175) (SAP No. 101313175) complete with the
No. 101313167)
must be ordered must be ordered ball cage and ball.
must be ordered
separately. separately.
separately.

Ball Checks
101252004 0.80" OD Steel Ball
101252003 1.00" OD Steel Ball
101252005 1.375" OD Steel Ball
101251998 2.25" OD Steel Ball
101313175 1.375” Ceramic Ball
101313167 2.175 Ceramic Ball

Ball Cages
3.06 in OD sizes for 4.0
101247249
to 4.5 in Casing
3.66 in OD sizes for 4.5
101247250
to 5.5 in Casing
4.50 in OD size for 6.0
101251973
to 7.625 in Casing
 Annulus Rate
HELP
12.00

SurgiFrac Proppant Dilution 10.00

8.00

6.00
Leakoff rate in Annulus 2.0000 BPM
4.00
Proppant Concentration 8.00 lb/gal
Tubing Rate 8.000 BPM 2.00

Rate on Annulus 25.000 BPM 0.00

1 2 3 Proppant
4 Concentration
5 6 7 8 9 10
Base Fluid Density 8.34 lb/gal
Proppant
Absolute Volume Factor of Proppant 0.04247 gal/lb Conc's. Vs. 1.00 2.00 3.00
Ann Rates
Negative
Slurry Factor 1.3397 1.00 Annulus Rate!
1.00 0.88

Negative
Clean Rate at the Blender 5.9713 BPM 2.00 Annulus Rate!
2.00 1.76

Proppant Concentration (lb/gal)

Negative
Sand Rate at the Blender 2.0287 BPM 3.00 Annulus Rate!
3.00 2.63

Negative
Density of the Slurry at the Blender 12.20 lb/gal 4.00 Annulus Rate!
4.00 3.49

Negative
5.00 Annulus Rate!
5.00 4.34

Annulus Fluid commingling in Negative

23.0000 BPM 6.00 6.00 5.19
fracutre Annulus Rate!
Negative
Slurry Rate in Fracture 31.0000 BPM 7.00 Annulus Rate!
7.00 6.02

Negative
8.00 Annulus Rate!
8.00 6.85

Negative
Slurry Factor in the Fracture 1.0700 9.00 Annulus Rate!
9.00 7.67
 Proppant
Proppant Concentration in the Negative
1.65 lb/gal 10.00 10.00 8.49
Fracture Annulus Rate!

Density of Slurry in Fracture 9.34 lb/gal

7 8 9 10
Annulus Rate (BPM)

4.00 5.00 6.00 7.00 8.00 9.00 10.00

0.79 0.72 0.66 0.61 0.56 0.52 0.49

1.57 1.42 1.30 1.19 1.10 1.03 0.96

2.34 2.11 1.92 1.76 1.63 1.51 1.41

3.09 2.78 2.52 2.31 2.13 1.98 1.84

3.84 3.44 3.11 2.84 2.62 2.43 2.26

4.57 4.08 3.69 3.36 3.09 2.86 2.66

5.29 4.71 4.25 3.87 3.55 3.28 3.05

5.99 5.32 4.79 4.35 3.99 3.68 3.42

6.69 5.93 5.32 4.83 4.42 4.07 3.78

7.37 6.52 5.84 5.29 4.83 4.45 4.12
HELP ********** Density and Mixing Volumes for Acid/Brine Mixtures **************

Fluid 60 ºF 8.3314 lb/gal Tubing Rate 0.500 BPM

Temperature 15.6 ºC
ρwater 0.9990 S.G.
Annulus
35.000 BPM
Rate
Leakoff Rate 2.000 BPM

Tubing Fluid Annulus Fluid Mixture in Fracture

Material % Material % Material
HCl 0.0 HCl 0.0 HCl 0.00
HF 0.0 HF 0.0 HF 0.00
Acetic 0.0 By Weight Acetic 0.0 By Weight Acetic 0.00 By Weight
Formic 0.0 Of Solution Formic 0.0 Of Solution Formic 0.00 Of Solution
Glycolic 0.0 Glycolic 0.0 Glycolic 0.00
Citric 0.0 Citric 0.0 Citric 0.00
NH4Cl 0.0 NH4Cl 0.0 NH4Cl 0.00
NaCl 0.0 NaCl 0.0 NaCl 0.00
NaBr 0.0 By Weight NaBr 0.0 By Weight NaBr 0.00 By Weight
KCl 0.0 Of Water KCl 4.0 Of Water KCl 3.94 Of Water
CaCl2 0.0 CaCl2 0.0 CaCl2 0.00
AlCl3 0.0 AlCl3 0.0 AlCl3 0.00

8.328 lb/gal 8.544 lb/gal 8.541 lb/gal

Density Density Density
0.999 kg/liter 1.025 kg/liter 1.024 kg/liter
 HELP
Flow of Gas
Gas Gravity 0.650
Discharge Coefficient 0.865
Ratio specific heats 1.270

8 9 10 11 12 13
0 0 0 0 0 0 0
200 67.5 86 106 128 153 178
400 135 172 212 256 306 356
600 202.5 258 318 384 459 534
800 270 344 424 512 612 712
1000 337.5 430 530 640 765 890
1200 405 516 636 768 918 1068
1400 472.5 602 742 896 1071 1246
1600 540 688 848 1024 1224 1424
1800 607.5 774 954 1152 1377 1602
Pressure (psi)

2000 675 860 1060 1280 1530 1780

2200 742.5 946 1166 1408 1683 1958
2400 810 1032 1272 1536 1836 2136
2600 877.5 1118 1378 1664 1989 2314
2800 945 1204 1484 1792 2142 2492
3000 1012.5 1290 1590 1920 2295 2670
3200 1080 1376 1696 2048 2448 2848
3400 1147.5 1462 1802 2176 2601 3026
3600 1215 1548 1908 2304 2754 3204
3800 1282.5 1634 2014 2432 2907 3382
4000 1350 1720 2120 2560 3060 3560
4200 1417.5 1806 2226 2688 3213 3738
4400 1485 1892 2332 2816 3366 3916
4600 1552.5 1978 2438 2944 3519 4094
4800 1620 2064 2544 3072 3672 4272
5000 1687.5 2150 2650 3200 3825 4450

* Critical Flow can be assumed if the pressure downstream of the choke is less than 60% of the

Flow of Water through Chokes

Flowback Fluid Density 8.42 lb/gal
 Chok
6 8 10 12 14 16
0.00 0.00 0.00 0.00 0.00 0.00 0.00
100.00 0.05 0.09 0.14 0.20 0.27 0.35
200.00 0.07 0.13 0.20 0.28 0.38 0.50
300.00 0.09 0.15 0.24 0.34 0.47 0.61
400.00 0.10 0.18 0.28 0.40 0.54 0.71
500.00 0.11 0.20 0.31 0.45 0.61 0.79
600.00 0.12 0.22 0.34 0.49 0.66 0.87
700.00 0.13 0.23 0.37 0.53 0.72 0.94
800.00 0.14 0.25 0.39 0.56 0.77 1.00
900.00 0.15 0.27 0.41 0.60 0.81 1.06
1000.00 0.16 0.28 0.44 0.63 0.86 1.12
1100.00 0.17 0.29 0.46 0.66 0.90 1.17
1200.00 0.17 0.31 0.48 0.69 0.94 1.23
1300.00 0.18 0.32 0.50 0.72 0.98 1.28
1400.00 0.19 0.33 0.52 0.74 1.01 1.32
1500.00 0.19 0.34 0.54 0.77 1.05 1.37
1600.00 0.20 0.35 0.55 0.80 1.08 1.42
1700.00 0.21 0.36 0.57 0.82 1.12 1.46
1800.00 0.21 0.38 0.59 0.84 1.15 1.50
1900.00 0.22 0.39 0.60 0.87 1.18 1.54
2000.00 0.22 0.40 0.62 0.89 1.21 1.58
2100.00 0.23 0.41 0.63 0.91 1.24 1.62
2200.00 0.23 0.41 0.65 0.93 1.27 1.66
2300.00 0.24 0.42 0.66 0.95 1.30 1.70
2400.00 0.24 0.43 0.68 0.98 1.33 1.73
2500.00 0.25 0.44 0.69 1.00 1.35 1.77
2600.00 0.25 0.45 0.70 1.01 1.38 1.80
2700.00 0.26 0.46 0.72 1.03 1.41 1.84
2800.00 0.26 0.47 0.73 1.05 1.43 1.87
2900.00 0.27 0.48 0.74 1.07 1.46 1.91
3000.00 0.27 0.48 0.76 1.09 1.48 1.94
3100.00 0.28 0.49 0.77 1.11 1.51 1.97
3200.00 0.28 0.50 0.78 1.13 1.53 2.00
3300.00 0.29 0.51 0.79 1.14 1.56 2.03
3400.00 0.29 0.52 0.81 1.16 1.58 2.06
3500.00 0.29 0.52 0.82 1.18 1.60 2.09
3600.00 0.30 0.53 0.83 1.19 1.63 2.12
3700.00 0.30 0.54 0.84 1.21 1.65 2.15
 3800.00 0.31 0.55 0.85 1.23 1.67 2.18
3900.00 0.31 0.55 0.86 1.24 1.69 2.21
4000.00 0.31 0.56 0.87 1.26 1.71 2.24
4100.00 0.32 0.57 0.89 1.27 1.73 2.27
4200.00 0.32 0.57 0.90 1.29 1.76 2.29
4300.00 0.33 0.58 0.91 1.31 1.78 2.32
4400.00 0.33 0.59 0.92 1.32 1.80 2.35
4500.00 0.33 0.59 0.93 1.34 1.82 2.37
4600.00 0.34 0.60 0.94 1.35 1.84 2.40
Pressure (psi)

4700.00 0.34 0.61 0.95 1.36 1.86 2.43

4800.00 0.34 0.61 0.96 1.38 1.88 2.45
4900.00 0.35 0.62 0.97 1.39 1.90 2.48
5000.00 0.35 0.63 0.98 1.41 1.92 2.50
5100.00 0.36 0.63 0.99 1.42 1.93 2.53
5200.00 0.36 0.64 1.00 1.44 1.95 2.55
5300.00 0.36 0.64 1.01 1.45 1.97 2.58
5400.00 0.37 0.65 1.02 1.46 1.99 2.60
5500.00 0.37 0.66 1.03 1.48 2.01 2.62
5600.00 0.37 0.66 1.03 1.49 2.03 2.65
5700.00 0.38 0.67 1.04 1.50 2.05 2.67
5800.00 0.38 0.67 1.05 1.52 2.06 2.69
5900.00 0.38 0.68 1.06 1.53 2.08 2.72
6000.00 0.39 0.69 1.07 1.54 2.10 2.74
6100.00 0.39 0.69 1.08 1.55 2.12 2.76
6200.00 0.39 0.70 1.09 1.57 2.13 2.79
6300.00 0.39 0.70 1.10 1.58 2.15 2.81
6400.00 0.40 0.71 1.11 1.59 2.17 2.83
6500.00 0.40 0.71 1.11 1.60 2.18 2.85
6600.00 0.40 0.72 1.12 1.62 2.20 2.87
6700.00 0.41 0.72 1.13 1.63 2.22 2.90
6800.00 0.41 0.73 1.14 1.64 2.23 2.92
6900.00 0.41 0.73 1.15 1.65 2.25 2.94
7000.00 0.42 0.74 1.16 1.67 2.27 2.96
7100.00 0.42 0.75 1.16 1.68 2.28 2.98
7200.00 0.42 0.75 1.17 1.69 2.30 3.00
7300.00 0.43 0.76 1.18 1.70 2.31 3.02
7400.00 0.43 0.76 1.19 1.71 2.33 3.04
7500.00 0.43 0.77 1.20 1.72 2.35 3.06
7600.00 0.43 0.77 1.21 1.74 2.36 3.08
7700.00 0.44 0.78 1.21 1.75 2.38 3.11
7800.00 0.44 0.78 1.22 1.76 2.39 3.13
 7900.00 0.44 0.79 1.23 1.77 2.41 3.15
8000.00 0.45 0.79 1.24 1.78 2.42 3.16
8100.00 0.45 0.80 1.24 1.79 2.44 3.18
8200.00 0.45 0.80 1.25 1.80 2.45 3.20
8300.00 0.45 0.81 1.26 1.81 2.47 3.22
8400.00 0.46 0.81 1.27 1.82 2.48 3.24
8500.00 0.46 0.82 1.27 1.84 2.50 3.26
8600.00 0.46 0.82 1.28 1.85 2.51 3.28
8700.00 0.46 0.83 1.29 1.86 2.53 3.30
8800.00 0.47 0.83 1.30 1.87 2.54 3.32
8900.00 0.47 0.83 1.30 1.88 2.56 3.34
9000.00 0.47 0.84 1.31 1.89 2.57 3.36
9100.00 0.47 0.84 1.32 1.90 2.58 3.38
9200.00 0.48 0.85 1.33 1.91 2.60 3.39
9300.00 0.48 0.85 1.33 1.92 2.61 3.41
9400.00 0.48 0.86 1.34 1.93 2.63 3.43
9500.00 0.49 0.86 1.35 1.94 2.64 3.45
9600.00 0.49 0.87 1.35 1.95 2.65 3.47
9700.00 0.49 0.87 1.36 1.96 2.67 3.49
9800.00 0.49 0.88 1.37 1.97 2.68 3.50
9900.00 0.50 0.88 1.38 1.98 2.70 3.52
10000.00 0.50 0.88 1.38 1.99 2.71 3.54

Rate in B
Flow Rate (Mscf/day)

Gas Flow through C

45000

40000

35000

30000

25000

20000

15000
 30000

25000

20000

15000

10000

5000

0
0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 40 60 80 100 120 140 160 180 200 220 240 260 28
Pressure (

Water Flow through

Rate (BPM)

30

25

20

15

10

0
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
 10

0
5

0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
Pressure
Flow of Gas through Chokes for Critical Flow*

Choke Size (x/64th)

14 15 16 18 20 22 24 26
0 0 0 0 0 0 0 0
207 238 270 342 425 515 610 715
414 476 540 684 850 1030 1220 1430
621 714 810 1026 1275 1545 1830 2145
828 952 1080 1368 1700 2060 2440 2860
1035 1190 1350 1710 2125 2575 3050 3575
1242 1428 1620 2052 2550 3090 3660 4290
1449 1666 1890 2394 2975 3605 4270 5005
1656 1904 2160 2736 3400 4120 4880 5720
1863 2142 2430 3078 3825 4635 5490 6435
2070 2380 2700 3420 4250 5150 6100 7150
2277 2618 2970 3762 4675 5665 6710 7865
2484 2856 3240 4104 5100 6180 7320 8580
2691 3094 3510 4446 5525 6695 7930 9295
2898 3332 3780 4788 5950 7210 8540 10010
3105 3570 4050 5130 6375 7725 9150 10725
3312 3808 4320 5472 6800 8240 9760 11440
3519 4046 4590 5814 7225 8755 10370 12155
3726 4284 4860 6156 7650 9270 10980 12870
3933 4522 5130 6498 8075 9785 11590 13585
4140 4760 5400 6840 8500 10300 12200 14300
4347 4998 5670 7182 8925 10815 12810 15015
4554 5236 5940 7524 9350 11330 13420 15730
4761 5474 6210 7866 9775 11845 14030 16445
4968 5712 6480 8208 10200 12360 14640 17160
5175 5950 6750 8550 10625 12875 15250 17875
Rate in Mscf/D
s less than 60% of the upstream pressure.
 Choke Size (x/64)
18 20 22 24 28 32 40 48
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.45 0.55 0.67 0.80 1.08 1.42 2.21 3.18
0.63 0.78 0.95 1.13 1.53 2.00 3.13 4.50
0.78 0.96 1.16 1.38 1.88 2.45 3.83 5.52
0.90 1.11 1.34 1.59 2.17 2.83 4.42 6.37
1.00 1.24 1.50 1.78 2.42 3.16 4.95 7.12
1.10 1.35 1.64 1.95 2.65 3.47 5.42 7.80
1.18 1.46 1.77 2.11 2.87 3.74 5.85 8.43
1.27 1.56 1.89 2.25 3.07 4.00 6.26 9.01
1.34 1.66 2.01 2.39 3.25 4.25 6.63 9.55
1.42 1.75 2.12 2.52 3.43 4.48 6.99 10.07
1.49 1.83 2.22 2.64 3.59 4.69 7.34 10.56
1.55 1.92 2.32 2.76 3.75 4.90 7.66 11.03
1.61 1.99 2.41 2.87 3.91 5.10 7.97 11.48
1.68 2.07 2.50 2.98 4.05 5.30 8.27 11.92
1.73 2.14 2.59 3.08 4.20 5.48 8.57 12.33
1.79 2.21 2.68 3.18 4.33 5.66 8.85 12.74
1.85 2.28 2.76 3.28 4.47 5.84 9.12 13.13
1.90 2.35 2.84 3.38 4.60 6.01 9.38 13.51
1.95 2.41 2.92 3.47 4.72 6.17 9.64 13.88
2.00 2.47 2.99 3.56 4.85 6.33 9.89 14.24
2.05 2.53 3.07 3.65 4.97 6.49 10.13 14.59
2.10 2.59 3.14 3.73 5.08 6.64 10.37 14.94
2.15 2.65 3.21 3.82 5.20 6.79 10.61 15.27
2.19 2.71 3.28 3.90 5.31 6.93 10.83 15.60
2.24 2.76 3.35 3.98 5.42 7.08 11.06 15.92
2.28 2.82 3.41 4.06 5.53 7.22 11.28 16.24
2.33 2.87 3.48 4.14 5.63 7.35 11.49 16.55
2.37 2.93 3.54 4.21 5.73 7.49 11.70 16.85
2.41 2.98 3.60 4.29 5.84 7.62 11.91 17.15
2.45 3.03 3.66 4.36 5.94 7.75 12.11 17.44
2.49 3.08 3.72 4.43 6.03 7.88 12.31 17.73
2.53 3.13 3.78 4.50 6.13 8.01 12.51 18.02
2.57 3.18 3.84 4.57 6.23 8.13 12.70 18.29
2.61 3.22 3.90 4.64 6.32 8.25 12.90 18.57
2.65 3.27 3.96 4.71 6.41 8.37 13.08 18.84
2.69 3.32 4.01 4.78 6.50 8.49 13.27 19.11
2.72 3.36 4.07 4.84 6.59 8.61 13.45 19.37
2.76 3.41 4.12 4.91 6.68 8.73 13.63 19.63
2.80 3.45 4.18 4.97 6.77 8.84 13.81 19.89
2.83 3.50 4.23 5.04 6.85 8.95 13.99 20.14
2.87 3.54 4.28 5.10 6.94 9.06 14.16 20.39
2.90 3.58 4.34 5.16 7.02 9.17 14.33 20.64
2.94 3.63 4.39 5.22 7.11 9.28 14.50 20.88
2.97 3.67 4.44 5.28 7.19 9.39 14.67 21.12
3.00 3.71 4.49 5.34 7.27 9.49 14.84 21.36
3.04 3.75 4.54 5.40 7.35 9.60 15.00 21.60
3.07 3.79 4.59 5.46 7.43 9.70 15.16 21.83
3.10 3.83 4.64 5.52 7.51 9.81 15.32 22.06
3.13 3.87 4.68 5.57 7.59 9.91 15.48 22.29
3.17 3.91 4.73 5.63 7.66 10.01 15.64 22.52
3.20 3.95 4.78 5.69 7.74 10.11 15.79 22.74
3.23 3.99 4.82 5.74 7.81 10.21 15.95 22.97
3.26 4.03 4.87 5.80 7.89 10.30 16.10 23.18
3.29 4.06 4.92 5.85 7.96 10.40 16.25 23.40
3.32 4.10 4.96 5.90 8.04 10.50 16.40 23.62
3.35 4.14 5.01 5.96 8.11 10.59 16.55 23.83
3.38 4.17 5.05 6.01 8.18 10.69 16.70 24.04
3.41 4.21 5.09 6.06 8.25 10.78 16.84 24.25
3.44 4.25 5.14 6.12 8.32 10.87 16.99 24.46
3.47 4.28 5.18 6.17 8.39 10.96 17.13 24.67
3.50 4.32 5.23 6.22 8.46 11.05 17.27 24.87
3.53 4.35 5.27 6.27 8.53 11.14 17.41 25.08
3.55 4.39 5.31 6.32 8.60 11.23 17.55 25.28
3.58 4.42 5.35 6.37 8.67 11.32 17.69 25.48
3.61 4.46 5.39 6.42 8.74 11.41 17.83 25.68
3.64 4.49 5.44 6.47 8.80 11.50 17.97 25.87
3.67 4.53 5.48 6.52 8.87 11.59 18.10 26.07
3.69 4.56 5.52 6.57 8.94 11.67 18.24 26.26
3.72 4.59 5.56 6.61 9.00 11.76 18.37 26.45
3.75 4.63 5.60 6.66 9.07 11.84 18.50 26.64
3.77 4.66 5.64 6.71 9.13 11.93 18.64 26.83
3.80 4.69 5.68 6.76 9.20 12.01 18.77 27.02
3.83 4.72 5.72 6.80 9.26 12.09 18.90 27.21
3.85 4.76 5.75 6.85 9.32 12.18 19.02 27.40
3.88 4.79 5.79 6.90 9.38 12.26 19.15 27.58
3.90 4.82 5.83 6.94 9.45 12.34 19.28 27.76
3.93 4.85 5.87 6.99 9.51 12.42 19.41 27.95
3.96 4.88 5.91 7.03 9.57 12.50 19.53 28.13
 3.98 4.91 5.95 7.08 9.63 12.58 19.66 28.31
4.01 4.95 5.98 7.12 9.69 12.66 19.78 28.48
4.03 4.98 6.02 7.17 9.75 12.74 19.90 28.66
4.06 5.01 6.06 7.21 9.81 12.82 20.03 28.84
4.08 5.04 6.09 7.25 9.87 12.90 20.15 29.01
4.10 5.07 6.13 7.30 9.93 12.97 20.27 29.19
4.13 5.10 6.17 7.34 9.99 13.05 20.39 29.36
4.15 5.13 6.20 7.38 10.05 13.13 20.51 29.53
4.18 5.16 6.24 7.43 10.11 13.20 20.63 29.70
4.20 5.19 6.28 7.47 10.17 13.28 20.75 29.87
4.22 5.22 6.31 7.51 10.22 13.35 20.86 30.04
4.25 5.25 6.35 7.55 10.28 13.43 20.98 30.21
4.27 5.27 6.38 7.59 10.34 13.50 21.10 30.38
4.30 5.30 6.42 7.64 10.39 13.58 21.21 30.55
4.32 5.33 6.45 7.68 10.45 13.65 21.33 30.71
4.34 5.36 6.49 7.72 10.51 13.72 21.44 30.88
4.37 5.39 6.52 7.76 10.56 13.80 21.56 31.04
4.39 5.42 6.55 7.80 10.62 13.87 21.67 31.20
4.41 5.45 6.59 7.84 10.67 13.94 21.78 31.37
4.43 5.47 6.62 7.88 10.73 14.01 21.89 31.53
4.46 5.50 6.66 7.92 10.78 14.08 22.01 31.69
4.48 5.53 6.69 7.96 10.84 14.15 22.12 31.85

Rate in BPM

hrough Chokes /64th

8
10
12
14
16
18
20
24
28
30
 14
16
18
20
24
28
30
36
40

200 400 600 800 000 200 400 600 800 000 200 400 600 800 000
2 2 2 2 3 3 3 3 3 4 4 4 4 4 5
Pressure (psi)

through Chokes /64th

6
8
10
12
14
16
18
20
22
24
28
32
40
48
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000

54
 2000
2200
2400
2600
2800

Pressure (psi) 3000

3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
54
48
40
32
28
24
 28 30 32 36 40
0 0 0 0 0
835 950 1080 1365 1685
1670 1900 2160 2730 3370
2505 2850 3240 4095 5055
3340 3800 4320 5460 6740
4175 4750 5400 6825 8425
5010 5700 6480 8190 10110
5845 6650 7560 9555 11795
6680 7600 8640 10920 13480
7515 8550 9720 12285 15165
8350 9500 10800 13650 16850
9185 10450 11880 15015 18535
10020 11400 12960 16380 20220
10855 12350 14040 17745 21905
11690 13300 15120 19110 23590
12525 14250 16200 20475 25275
13360 15200 17280 21840 26960
14195 16150 18360 23205 28645
15030 17100 19440 24570 30330
15865 18050 20520 25935 32015
16700 19000 21600 27300 33700
17535 19950 22680 28665 35385
18370 20900 23760 30030 37070
19205 21850 24840 31395 38755
20040 22800 25920 32760 40440
20875 23750 27000 34125 42125
 54
0.00
4.03
5.70
6.98
8.06
9.01
9.87
10.66
11.40
12.09
12.75
13.37
13.96
14.53
15.08
15.61
16.12
16.62
17.10
17.57
18.03
18.47
18.91
19.33
19.75
20.15
20.55
20.94
21.33
21.71
22.08
22.44
22.80
23.15
23.50
23.85
24.18
24.52
24.85
25.17
25.49
25.81
26.12
26.43
26.74
27.04
27.34
27.63
27.92
28.21
28.50
28.78
29.07
29.34
29.62
29.89
30.16
30.43
30.70
30.96
31.22
31.48
31.74
31.99
32.24
32.50
32.74
32.99
33.24
33.48
33.72
33.96
34.20
34.44
34.67
34.91
35.14
35.37
35.60
35.82
36.05
36.28
36.50
36.72
36.94
37.16
37.38
37.60
37.81
38.02
38.24
38.45
38.66
38.87
39.08
39.29
39.49
39.70
39.90
40.10
40.31

8
10
12
14
16
18
20
24
28
30
 14
16
18
20
24
28
30
36
40

000
5

6
8
10
12
14
16
18
20
22
24
28
32
40
48
5000

54
 24
28
32
40
48
5000

54
 Base Fluid Density (lb/gal) Calculate Annular Volumes from Tubing Calculate Tubing Volum
HELP HydraJet Velocity
8.34
Acid Density (lb/gal) Tubing Tubing Tubing Tubing Stage Tubing Annulus
9.20 Prop Conc (lb/gal) Proppant Type Rate Volume Fluid Prop Conc (lb/gal)
Stage Type Begin End Fill Down BPM Gallons Type Begin End F
1 Load well / Circ to next zone 2 0.0 0.0 100 Mesh 0.04247 2.0 11000 Linear Gel 0 0 VersaPro

2 1st Cutting Stage 3 1.0 1.0 100 Mesh 0.04247 3.0 1200 Linear Gel 0 0 VersaPro

3 Spacer 4 0.0 0.0 100 Mesh 0.04247 3.0 4000 Linear Gel 0 0 VersaPro

4 Step-Down Test 17 1.0 1.0 100 Mesh 0.04247 3.0 1200 Linear Gel 0 0 VersaPro

5 Spacer 4 0.0 0.0 100 Mesh 0.04247 3.0 6000 Linear Gel 0 0 VersaPro

6 ACID 7 0.0 0.0 100 Mesh 0.04247 3.0 500 SGA Acid 0 0 VersaPro

7 Displace Acid while Jetting 8 0.0 0.0 100 Mesh 0.04247 3.0 1500 Linear Gel 0 0 VersaPro

8 Breakdown and Establish Injection 9 0.0 0.0 100 Mesh 0.04247 3.0 315 Linear Gel 0 0 VersaPro

9 PAD 10 0.0 0.0 100 Mesh 0.04247 0.5 800 Linear Gel 0 0 VersaPro

10 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 519 X-Linked

Linear GelGel 1 1 VersaPro

11 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 269 Linear Gel 2 2 VersaPro

12 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 185 Linear Gel 3 3 VersaPro

13 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 479 Linear Gel 4 4 VersaPro

14 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 198 Linear Gel 5 5 VersaPro

15 Screen-out Slug 12 0.0 0.0 100 Mesh 0.04247 0.5 54 Linear Gel 8 8 VersaPro

16 Flush 13 0.0 0.0 100 Mesh 0.04247 0.5 136 Linear Gel 0 0 VersaPro

17 POOH to next interval 14 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

18 Load well / Circ to next zone 2 0.0 0.0 100 Mesh 0.04247 2.0 11000 Linear Gel 0 0 VersaPro

19 1st Cutting Stage 3 1.0 1.0 100 Mesh 0.04247 3.0 1200 Linear Gel 0 0 VersaPro

20 Spacer 4 0.0 0.0 100 Mesh 0.04247 3.0 4000 Linear Gel 0 0 VersaPro

21 2nd Cutting Stage 6 1.0 1.0 100 Mesh 0.04247 3.0 1200 Linear Gel 0 0 VersaPro

22 Spacer 4 0.0 0.0 100 Mesh 0.04247 3.0 6000 Linear Gel 0 0 VersaPro

23 ACID 7 0.0 0.0 100 Mesh 0.04247 3.0 500 SGA Acid 0 0 VersaPro

24 Displace Acid while Jetting 8 0.0 0.0 100 Mesh 0.04247 3.0 1500 Linear Gel 0 0 VersaPro

25 Breakdown and Establish Injection 9 0.0 0.0 100 Mesh 0.04247 3.0 315 Linear Gel 0 0 VersaPro

26 PAD 10 0.0 0.0 100 Mesh 0.04247 0.5 86 Linear Gel 1 1 VersaPro

27 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 269 Linear Gel 2 2 VersaPro

28 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 278 Linear Gel 3 3 VersaPro

29 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 192 Linear Gel 4 4 VersaPro

100 Mesh VersaPro

 SLF Linear Gel

30 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 396 Linear Gel 5 5 VersaPro

31 SLF 11 0.0 0.0 100 Mesh 0.04247 0.5 217 Linear Gel 8 8 VersaPro

32 Screen-out Slug 12 0.0 0.0 100 Mesh 0.04247 0.5 42 Linear Gel 0 0 VersaPro

33 Flush 13 0.0 0.0 100 Mesh 0.04247 0.5 136 Linear Gel 0 0 VersaPro

34 POOH to next interval 14 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

35 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

36 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

37 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

38 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

39 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

40 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

41 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

42 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

43 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

44 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

45 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

46 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

47 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

48 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

49 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

50 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

51 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

52 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

53 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

54 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

55 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

56 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

57 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

58 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

59 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

60 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

61 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

62 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

63 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

100 Mesh VersaPro

 Not Used Linear Gel

64 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

65 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

66 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

67 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

68 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

69 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

70 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

71 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

72 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

73 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

74 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

75 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

76 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

77 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

78 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

79 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

80 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

81 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

82 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

83 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

84 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

85 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

86 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

87 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

88 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

89 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

90 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

91 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

92 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

93 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

94 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

95 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

96 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

97 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

100 Mesh VersaPro

 Not Used Linear Gel

98 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

99 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro

100 Not Used 1 0.0 0.0 100 Mesh 0.04247 0.0 0 Linear Gel 0 0 VersaPro
bing Volumes from Annulus
Tubing Tubing Tubing Max Tubing Max Nozzle Annulus
Annulus Annulus Ann. Stage Annulus BHTP Stage Dirty Stage Prop Cum Prop Pressure Pressure Drop Stage Dirty
Proppant Type Rate (BPM) Volume (gal) Fluid Gradient Volume (gal) Weight (lbs) Weight (lbs) (psi) (psi) Volume (gal)
Fill Down BPM Gallons Type psi/ft
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 11000 0 0 8096 139 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 1251 1200 1200 10043 335 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 4000 0 1200 10009 312 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 1251 1200 2400 10043 335 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 6000 0 2400 10009 312 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 500 0 2400 9761 344 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 1500 0 2400 10009 312 0
0.0374370122230366
VersaProp 30 3150 X-Linked Gel 0.91 315 0 2400 10009 312 3150
0.0374370122230366
VersaProp 30 48000 X-Linked Gel 0.91 800 0 2400 7322 9 48000
0.0374370122230366
VersaProp 30 30000 X-Linked Gel 0.91 519 0 2400 6132 9 31123
0.0374370122230366
VersaProp 30 15000 X-Linked Gel 0.91 269 0 2400 6132 9 16123
0.0374370122230366
VersaProp 30 10000 X-Linked Gel 0.91 185 0 2400 6132 9 11123
0.0374370122230366
VersaProp 30 25000 X-Linked Gel 0.91 479 0 2400 6132 9 28744
0.0374370122230366
VersaProp 30 10000 X-Linked Gel 0.91 198 0 2400 6132 9 11872
0.0374370122230366
VersaProp 30 2500 X-Linked Gel 0.91 54 0 2400 6132 9 3249
0.0374370122230366
VersaProp 30 8187 X-Linked Gel 0.91 136 0 2400 6132 9 8187
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.91 0 0 2400 5720 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 11000 0 2400 7496 139 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 1251 1200 3600 9443 335 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 4000 0 3600 9409 312 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 1251 1200 4800 9443 335 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 6000 0 4800 9409 312 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 500 0 4800 9161 344 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 1500 0 4800 9409 312 0
0.0374370122230366
VersaProp 30 3150 X-Linked Gel 0.86 315 0 4800 9409 312 3150
0.0374370122230366
VersaProp 30 5000 X-Linked Gel 0.86 86 0 4800 8848 9 5187
0.0374370122230366
VersaProp 30 15000 X-Linked Gel 0.86 269 0 4800 8047 9 16123
0.0374370122230366
VersaProp 30 15000 X-Linked Gel 0.86 278 0 4800 5532 9 16685
0.0374370122230366
VersaProp 30 10000 X-Linked Gel 0.86 192 0 4800 5532 9 11497
VersaProp
 X-Linked Gel

0.0374370122230366
VersaProp 30 20000 X-Linked Gel 0.86 396 0 4800 5532 9 23744
0.0374370122230366
VersaProp 30 10000 X-Linked Gel 0.7 217 0 4800 3612 9 12995
0.0374370122230366
VersaProp 30 2500 X-Linked Gel 0.7 42 0 4800 3612 9 2500
0.0374370122230366
VersaProp 30 8187 X-Linked Gel 0.7 136 0 4800 3612 9 8187
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
VersaProp
 X-Linked Gel

0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
VersaProp
 X-Linked Gel

0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.7 0 0 4800 3200 0 0
0.0374370122230366
VersaProp 0 0 X-Linked Gel 0.86 0 0 4800 5120 0 0
 CommandButton3
CommandButton1
Annulus Annulus Annulus Stage Cum CommandButton4
CommandButton2
Stage Prop Cum Prop Pressure Time Time CommandButton6
CommandButton5
Weight (lbs) Weight (lbs) (psi) (min) (min) CommandButton7
Rate
0 NoRate TIME Tubing Rate
0 0 5720 131.0 131.0 0 1 0.0 2.0
0 0 5720 9.5 140.5 0 1 131.0 2.0
0 0 5720 31.7 172.2 0 1 131.0 3.0
0 0 5720 9.5 181.7 0 1 140.5 3.0
0 0 5720 47.6 229.4 0 1 140.5 3.0
0 0 5720 4.0 233.3 0 1 172.2 3.0
0 0 5720 11.9 245.2 0 1 172.2 3.0
0 0 7029 2.5 247.7 0 1 181.7 3.0
0 0 8074 38.1 285.8 0 1 181.7 3.0
30000 30000 7896 23.8 309.6 0 1 229.4 3.0
30000 60000 7746 11.9 321.5 0 1 229.4 3.0
30000 90000 7623 7.9 329.5 0 1 233.3 3.0
100000 190000 7523 19.8 349.3 0 1 233.3 3.0
50000 240000 7444 7.9 357.3 0 1 245.2 3.0
20000 260000 7729 2.0 359.2 0 1 245.2 3.0
0 260000 8074 6.5 365.7 0 1 247.7 3.0
0 260000 5720 0.0 365.7 1 0 247.7 0.5
0 260000 5120 131.0 496.7 1 1 285.8 0.5
0 260000 5120 9.5 506.2 1 1 285.8 0.5
0 260000 5120 31.7 538.0 1 1 309.6 0.5
0 260000 5120 9.5 547.5 1 1 309.6 0.5
0 260000 5120 47.6 595.1 1 1 321.5 0.5
0 260000 5120 4.0 599.1 1 1 321.5 0.5
0 260000 5120 11.9 611.0 1 1 329.5 0.5
0 260000 6429 2.5 613.5 1 1 329.5 0.5
5000 265000 7554 4.0 617.5 1 1 349.3 0.5
30000 295000 7146 11.9 629.4 1 1 349.3 0.5
45000 340000 7023 11.9 641.3 1 1 357.3 0.5
40000 380000 6923 7.9 649.2 1 1 357.3 0.5
100000 480000 6844 15.9 665.1 1 1 359.2 0.5
80000 560000 4796 7.9 673.0 1 1 359.2 0.5
0 560000 4051 2.0 675.0 1 1 365.7 0.5
0 560000 5554 6.5 681.5 1 1 365.7 0.0
0 560000 3200 0.0 681.5 2 0 365.7 0.0
0 560000 3200 0.0 681.5 2 0 365.7 2.0
0 560000 3200 0.0 681.5 2 0 496.7 2.0
0 560000 3200 0.0 681.5 2 0 496.7 3.0
0 560000 3200 0.0 681.5 2 0 506.2 3.0
0 560000 3200 0.0 681.5 2 0 506.2 3.0
0 560000 3200 0.0 681.5 2 0 538.0 3.0
0 560000 3200 0.0 681.5 2 0 538.0 3.0
0 560000 3200 0.0 681.5 2 0 547.5 3.0
0 560000 3200 0.0 681.5 2 0 547.5 3.0
0 560000 3200 0.0 681.5 2 0 595.1 3.0
0 560000 3200 0.0 681.5 2 0 595.1 3.0
0 560000 3200 0.0 681.5 2 0 599.1 3.0
0 560000 3200 0.0 681.5 2 0 599.1 3.0
0 560000 3200 0.0 681.5 2 0 611.0 3.0
0 560000 3200 0.0 681.5 2 0 611.0 3.0
0 560000 3200 0.0 681.5 2 0 613.5 3.0
0 560000 3200 0.0 681.5 2 0 613.5 0.5
0 560000 3200 0.0 681.5 2 0 617.5 0.5
0 560000 3200 0.0 681.5 2 0 617.5 0.5
0 560000 3200 0.0 681.5 2 0 629.4 0.5
0 560000 3200 0.0 681.5 2 0 629.4 0.5
0 560000 3200 0.0 681.5 2 0 641.3 0.5
0 560000 3200 0.0 681.5 2 0 641.3 0.5
0 560000 3200 0.0 681.5 2 0 649.2 0.5
0 560000 3200 0.0 681.5 2 0 649.2 0.5
0 560000 3200 0.0 681.5 2 0 665.1 0.5
0 560000 3200 0.0 681.5 2 0 665.1 0.5
0 560000 3200 0.0 681.5 2 0 673.0 0.5
0 560000 3200 0.0 681.5 2 0 673.0 0.5
0 560000 3200 0.0 681.5 2 0 675.0 0.5
0 560000 3200 0.0 681.5 2 0 675.0 0.5
0 560000 3200 0.0 681.5 2 0 681.5 0.5
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 3200 0.0 681.5 2 0 681.5 0.0
0 560000 5120 0.0 681.5 2 0 681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
681.5 0.0
0.0
Tubing Pres Tubing PropAnnRate AnnPress AnnProp1
8096 0.0 0 5720 0 2.0
8096 0.0 0 5720 0 3.0
10043 1.0 0 5720 0 3.0
10043 1.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
10043 1.0 0 5720 0 3.0
10043 1.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
9761 0.0 0 5720 0 3.0
9761 0.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
10009 0.0 0 5720 0 3.0
10009 0.0 0 7029 0 3.0
10009 0.0 30 7029 0 0.5
7322 0.0 30 8074 0 0.5
7322 0.0 30 8074 0 0.5
6132 0.0 30 7896 1 0.5
6132 0.0 30 7896 1 0.5
6132 0.0 30 7746 2 0.5
6132 0.0 30 7746 2 0.5
6132 0.0 30 7623 3 0.5
6132 0.0 30 7623 3 0.5
6132 0.0 30 7523 4 0.5
6132 0.0 30 7523 4 0.5
6132 0.0 30 7444 5 0.5
6132 0.0 30 7444 5 0.5
6132 0.0 30 7729 8 0.5
6132 0.0 30 7729 8 0.5
6132 0.0 30 8074 0 0.5
6132 0.0 30 8074 0 0.0
5720 0.0 30 5720 0 0.0
5720 0.0 0 5720 0 2.0
7496 0.0 0 5120 0 2.0
7496 0.0 0 5120 0 3.0
9443 1.0 0 5120 0 3.0
9443 1.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9443 1.0 0 5120 0 3.0
9443 1.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9161 0.0 0 5120 0 3.0
9161 0.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9409 0.0 0 5120 0 3.0
9409 0.0 0 6429 0 3.0
9409 0.0 30 6429 0 0.5
8848 0.0 30 7554 1 0.5
8848 0.0 30 7554 1 0.5
8047 0.0 30 7146 2 0.5
8047 0.0 30 7146 2 0.5
5532 0.0 30 7023 3 0.5
5532 0.0 30 7023 3 0.5
5532 0.0 30 6923 4 0.5
5532 0.0 30 6923 4 0.5
5532 0.0 30 6844 5 0.5
5532 0.0 30 6844 5 0.5
3612 0.0 30 4796 8 0.5
3612 0.0 30 4796 8 0.5
3612 0.0 30 4051 0 0.5
3612 0.0 30 4051 0 0.0
3612 0.0 30 5554 0 0.0
3612 0.0 30 5554 0 0.0
3200 0.0 30 3200 0 0.0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0 0.0
3200 0.0 0 3200 0
3200 0.0 0 3200 0
5120 0.0 0 5120 0
5120 0.0 0 5120 0
0 0.0 0 5120 0
0 0.0 0
 Total Job Plot

Tubing Pressure AnnPress Tubing Rate AnnRate Tubing Proppant Concentration AnnProp1

12000 35

30
10000

Rate/PropC
25
Pressure

8000

20

6000

15

4000
10

2000
5

0 0
0.0 100.0 200.0 300.0 400.0 500.0 600.0 700.0 800.0
Time
 Company Name Job Pumping Summary
Well Name
12/1/2024
Tubing Annulus
Proppant Proppant
Concentration Concentration
Stage Clean Stage Clean
Stage # Stage Description Volume Fluid Rate Begin End Volume Fluid Rate Begin End
1 Load well / Circ to next zone 11000 30# WaterFrac-G 2 0 0 0 0 0 0
2 1st Cutting Stage 1200 30# WaterFrac-G 3 1 1 0 0 0 0
3 Spacer 4000 30# WaterFrac-G 3 0 0 0 0 0 0
4 Step-Down Test 1200 30# WaterFrac-G 3 1 1 0 0 0 0
5 Spacer 6000 30# WaterFrac-G 3 0 0 0 0 0 0
6 ACID 500 30# WaterFrac-G 3 0 0 0 0 0 0
7 Displace Acid while Jetting 1500 30# WaterFrac-G 3 0 0 0 0 0 0
8 Breakdown and Establish Injection 315 30# WaterFrac-G 3 0 0 3150 40# Hybor-G 30 0 0
9 PAD 800 30# WaterFrac-G 0.5 0 0 48000 40# Hybor-G 30 0 0
10 SLF 519 30# WaterFrac-G 0.5 0 0 30000 40# Hybor-G 30 1 1
11 SLF 269 30# WaterFrac-G 0.5 0 0 15000 40# Hybor-G 30 2 2
12 SLF 185 30# WaterFrac-G 0.5 0 0 10000 40# Hybor-G 30 3 3
13 SLF 479 30# WaterFrac-G 0.5 0 0 25000 40# Hybor-G 30 4 4
14 SLF 198 30# WaterFrac-G 0.5 0 0 10000 40# Hybor-G 30 5 5
15 Screen-out Slug 54 30# WaterFrac-G 0.5 0 0 2500 40# Hybor-G 30 8 8
16 Flush 136 30# WaterFrac-G 0.5 0 0 8187 30# WaterFrac-G 30 0 0
17 POOH to next interval 0 30# WaterFrac-G 0 0 0 0 0 0 0
18 Load well / Circ to next zone 11000 30# WaterFrac-G 2 0 0 0 0 0 0
19 1st Cutting Stage 1200 30# WaterFrac-G 3 1 1 0 0 0 0
20 Spacer 4000 30# WaterFrac-G 3 0 0 0 0 0 0
21 2nd Cutting Stage 1200 30# WaterFrac-G 3 1 1 0 0 0 0
22 Spacer 6000 30# WaterFrac-G 3 0 0 0 0 0 0
23 ACID 500 30# WaterFrac-G 3 0 0 0 0 0 0
24 Displace Acid while Jetting 1500 30# WaterFrac-G 3 0 0 0 0 0 0
25 Breakdown and Establish Injection 315 30# WaterFrac-G 3 0 0 3150 40# Hybor-G 30 0 0
26 PAD 86 30# WaterFrac-G 0.5 0 0 5000 40# Hybor-G 30 1 1
27 SLF 269 30# WaterFrac-G 0.5 0 0 15000 40# Hybor-G 30 2 2
28 SLF 278 30# WaterFrac-G 0.5 0 0 15000 40# Hybor-G 30 3 3
29 SLF 192 30# WaterFrac-G 0.5 0 0 10000 40# Hybor-G 30 4 4
30 SLF 396 30# WaterFrac-G 0.5 0 0 20000 40# Hybor-G 30 5 5
31 SLF 217 30# WaterFrac-G 0.5 0 0 10000 40# Hybor-G 30 8 8
32 Screen-out Slug 42 30# WaterFrac-G 0.5 0 0 2500 40# Hybor-G 30 0 0
33 Flush 136 30# WaterFrac-G 0.5 0 0 8187 30# WaterFrac-G 30 0 0
34 POOH to next interval 0 30# WaterFrac-G 0 0 0 0 30# WaterFrac-G 0 0 0
35 Not Used 0 30# WaterFrac-G 0 0 0 0 30# WaterFrac-G 0 0 0
36 Not Used 0 30# WaterFrac-G 0 0 0 0 30# WaterFrac-G 0 0 0
37 Not Used 0 30# WaterFrac-G 0 0 0 0 30# WaterFrac-G 0 0 0
38 Not Used 0 30# WaterFrac-G 0 0 0
 Penetration Depth (in)

2
3
4
5
6
7
8
9
10

0
10
Tim
 Time (min)
10 20 30 40