Scribd
Upload
78 views1 page

4CA2-T10049 01 Dang

Uploaded by

danandrew91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views1 page

4CA2-T10049 01 Dang

Uploaded by

danandrew91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SIME Brakes

SIME Brakes

Disc brake Technical data and dimensions

Caliper 4CA2
Fail safe braking Working conditions: Options:
Braking by spring application • Ambient température: -10°C to +60°C • Manual release lever
Electromagnetic release • Relative humidity ≤ 70% • Hydraulic release
Automatic wear compensation • Dust in atmosphere ≥ 65µ • Manual wear compensation
Opening proving switch Other conditions, consult us. • Flameproof protection
Brake pads with wear indicator • Marine protection
Use: • Closing proving switch
Any application up to 1000act/h • Switch on release nut

Left-hand caliper Right-hand caliper


ØD

17°30 350
G 20
l

355
Opening switch
Cable gland PG16
260 E F
50

Cable gland PG16


30
117.5 440
370

135 117.5

4 × Ø 22 Ød

Weight: 120kg
Response time at nominal torque : see the leaflet of the associated electrical power supply.

Technical data :
Discs 445 495 550 625 705 795
Nominal torque for 1 caliper Opening proving switch :
N.m 950 1100 1270 1500 1750 2000
adjustable from -30 to +20% 250VAC maxi., 5A maxi., with interrupting
Maximum disc speed for capacity : 50VA maxi.
r.p.m. 2100 1900 1800 1500 1300 1200
nominal torque 220VDC maxi., 5A maxi., with interrupting
capacity : 50W maxi.
D mm 445 495 550 625 705 795
d mm 0-70 0-100 0-100 0-100 0-120 0-130 Compatible with PLC (Programmable Logic
E mm 130 160 180 215 255 295 Controllers).
F mm 110 140 160 195 235 275 An opening switch used with other equipment
G mm 225 235 240 250 260 275 than PLC must not be reused with a PLC.
l (approx. dimension) mm 90 125 145 180 225 265

Maximum reaction 1 caliper N 7400


on shaft 2 calipers N 4450

Due to continuous development and improvement, all dimensions and characteristics are subject to change without notice.

Discs Leaflet No. T02220-01 Options Leaflet No. A10048-01 22/03/16


Drawings No. G10047-01 Power supplies AC32 No. T10005-01 / T10006-01 / T10007-01 / T10008-01
Installation and maintenance No. M10048-01 Power supplies AC64 No. T04500-01 / T04510-01 / T04530-01 / T04540-01
Spare parts No. S10048-01 T10049-01-D

www.stromag.com - Customer service / Tel. : +33(0)1 49 90 32 20 / Fax : +33(0)1 49 89 06 38

You might also like