Carrier-level

Core Switches S8500E

SERIES
Varied Service
Characteristics
Versatile IPv6 Solution
99.999%Carrier-level Complete Security
Reliability Mechanism

Advanced Hardware
Architecture and
Industry-leading Port
40GE Campus Density
Network Core Switches

S8500E Series supports the “GreenTouch”

architecture and “Smart@CHIP”, significantly
reducing equipment energy consumption, effectively
cutting down operation and maintenance costs, and
Product Overview providing a perfect solution for the green and
sustainable development of the network.
BDCOM S8500E Series, a new generation T-bit
carrier-level core switch oriented for carrier's IP
BDCOM S8500E Series consists of three models:
MANs and campus networks. Developed on the
S8503E, S8506E and S8510E, which can meet the
leading architecture of distributive multi-stage
port density and performance requirements of
switching matrix and BDROS software platform
different network scales.
BDCOM with its own independent intellectual
property rights, S8500E Series provides high-
performance L2/L3/L4 wire speed switching
capacity by integrating services such as IPv6,
network security, flow analysis, virtualization,
with high reliable techniques including
continuous forwarding, graceful restarting and
loop network protection, the work efficiency of
S8500E Series and its maximum running time
are guaranteed.
Product Characteristics

Advanced Hardware Architecture Design & Innovative VSS Technique

Leading Processing Capacity
S8500E Series supports BVSS (BDCOM Virtual Switch
With the leading architecture of distributive multi- System), which can virtualize multiple physical devices
stage switching matrix, the ASIC switch chip and into one in logic. The virtualized system is superior to
the multi-core processor, S8500E Series meets the the independent physical device in performance,
carrier-level core equipment requirements of high reliability, flexibility and management.
performance, high capacity, high density and
expansion. Doubled Performance: The virtualized system makes
the best use of each link in the device and avoids the
S8500E Series supports high-intensity 40GE service blocking of STP to the link.
boards and realizes the wire-speed switching of 3
layers without blocking. High-reliability: Based on the advanced distributed
processing technique and the efficient function of
cross-physical device link aggregation, S8500E Series
Carrier-level High Reliability
provides with non-stop layer-3 routing forwarding and
S8500E Series adopts HPS (Hitless Protection avoids single points of failure.
System). The key components of S8500E Series such
as the main control unit, power system and the fan Flexibility: With the function of S8500E virtual cluster
system support redundancy design. All system service cards, the distance of virtual cluster system
modules support hot-swap and seamless switching can expand to 80KM, breaking the geographic
without manual intervention. restriction of traditional cluster technique.

S8500E Series supports redundancy protection Easy Management: The whole virtual system realizes
mechanism such as STP/RSTP/MSTP protocol, VRRP single IP unified management and simplifies the
protocol, ring network protection, dual uplink management of network device and network topology.
active/standby link protection and LACP link
aggregation.
Comprehensive IPv6 Solutions
S8500E Series supports ISSU (In-Service Software S8500E Series comprehensively supports IPv6
Upgrade) and GR (Graceful Restart) for OSPF/BGP, Neighbor Discovery, ICMPv6, Path MTU Discovery and
guaranteeing the user data non-stop forwarding DHCPv6.
when the system is upgrading.
S8500E Series supports IPv6-based Ping, Traceroute,
S8500E Series supports BFD and realizes fault Telnet, SSH, ACL, meeting the need of IPv6 network
detection and service recovery in seconds through equipment management and service control.
linking with layer-2 or layer-3 protocol.
S8500E Series supports IPv6 multicast characteristics
High Reliability (99.999%): MTTR of S8500E Series is including MLD, MLD Snooping and IPv6 layer-3 routing
50ms, meeting the requirement of the carrier-level protocols including IPv6 static routing, RIPng, OSPFv3
service. and BGP4+.

BDCOM S8500E Series

2
Product Characteristics

Comprehensive Service Innovative Green Environmental Design

S8500E Series supports complete layer-2 and layer-3 S8500E Series supports the “GreenTouch” architecture.
multicast routing protocol and meets the access Its power consumption is no more than 1000W.
requirement of IPTV, multi-terminal high-definition
video monitoring and high-definition video meeting.
Smart Power Management System: S8500E Series
adopts advanced power system architecture design
S8500E Series supports complete layer-3 routing which can realize the function of efficient power
protocol and a super-large routing table capacity, switching, private power monitoring, soft start, real-
which make super-large data center network, campus time monitoring, intelligent adjustment and energy-
network, enterprise network and industry private saving.
networks available.
Smart Fan Management System: S8500E Series is
Comprehensive Security Mechanisms designed with the intelligent fan and supports
S8500E Series adopts advanced hardware architecture switching between front-back mode and back-front
design, realizing the hierarchical scheduling and mode and fan automatic speed regulation.
protection of the packet. It provides multiple security
measures to defend against DOS or TCP attacks; and S8500E Series supports Efficient Ethernet and
supports command line authority control based on user complies with International standard IEEE 802.3az.
levels.

Comprehensive Security Certification: S8500E Series

complies with IEEE 802.1x, Radius, BDTacacs+.

Enhanced Service Security Mechanism: S8500E Series

supports the plain text or MD5 authentication of
relevant routing protocol; uRRF; DPI (Deep Packet
Inspection) and (Deep Packet Filtration); DPI for
control packets and data packets.

S8500E SERIES
Note:
The standard configuration
does not include the power supply

power slots
MCU slots

business slots

BDCOM S8500E Series

3
Model lists

S8503E S8506E S8510E

Carrier-level Core Switch Carrier-level Core Switch Carrier-level Core Switch

1 fan module, 1 fan module, 1 fan module,

3 power slots, 3 power slots, 3 power slots,
exclude the power supply, exclude the power supply, exclude the power supply,
1 MCU slot, 2 MCU slots, 2 MCU slots,
1 MCU/business slot, 4 business slots 8 business slots
1 business slot

Application Diagram
In
te
rn

S29
et

28E
S85
BS
R2

00E
90
0

VS S85 S29
Office building
S 00E 54
S arm
er s
F

ve
r
S2
92
S2

8E
52

F
8-
P

NV
R
S2
51
0P

CCTV VSS 40GE fiber

10GE fiber
S2

Gigabit fiber
95
2P

Gigabit Ethernet cable

W
A
P
21
00
-T
22
E
W
A
P
21
00

Office building
-I2
3B

BDCOM S8500E Series

4
Specifications
Items S8503E S8506E S8510E
Interface
Switching capacity 736Gbps/1.47Tbps 1.28/2.56Tbps 2.56/5.12Tbps

Forwarding rate 552/1104 Mpps 810/1920 Mpps 1920/3840 Mpps

Total Number of slots 3 6 10

MCU slots 1+1 2 2

Business slots 3 4 8
Performance/Storage
Energy saving IEEE 802.3az green IEEE 802.3az green IEEE 802.3az green
Efficient Ethernet Efficient Ethernet Efficient Ethernet

Operating temperature 0℃ ~ 40℃ 0℃ ~ 40℃ 0℃ ~ 40℃

Operating humidity 10%~90% 10%~90% 10%~90%

(non-condensing) (non-condensing) (non-condensing)

Power supply AC:100V-240V, 50Hz±10% AC:100V-240V, 50Hz±10% AC:100V-240V, 50Hz±10%

DC: -48V DC: -48V DC: -48V

Power consumption(W) <350W <550W <1300W

Dimensions mm (WxDxH) 482×377×178 482×370×397 482×370×530

4U 9U 12U

Weight KG (empty) 10.5 21 25.5

BDCOM S8500E Series

5
Features

MAC Switching Multicast QoS

· Static configuration and dynamically · IGMP v1/v2/v3 · Traffic classification of each field of
learning of MAC address · IGMP Snooping L2/L3/L4 protocol headers
· Check and clear MAC address · IGMP Fast Leave · CAR traffic control
· Configuring of MAC address aging · Multicast group policy and multicast · 802.1P/DSCP priority remark
time number limit · Multiple queuing algorithms such as
· Limit on MAC address learning · MVR SP, WRR or SP+WRR
number · PIM-SM and PIM-DM · Tail-Drop, WRED
· MAC address filtering function · Traffic supervision and traffic shaping
· Black-hole MAC items · Ingress and Egress ACL, and
matching L2, L3, L4 and IP
IPv4
quintuples for copying, forwarding
· Static routing, RIP v1/v2, OSPF and BGP and discarding
VLAN · Policy routing
· 4K VLAN entries · Load balance through equal-cost · Hash algorithms and load balancing
· GVRP routing
· 1:1 and N:1 VLAN Mapping · Graceful Restart of OSPF and BGP
· Basic QinQ and selective QinQ · BFD for OSPF and BGP Security features
· Private VLAN · Identification and filtering of L2/L3/L4
IPv6 based ACL
Reliability · ICMPv6, DHCPv6, ACLv6, IPv6 Telnet · Defend against DoS or TCP attacks
· Dual Master Control Redundancy · IPv6 Neighbor Discovery · Suppression of broadcast, multicast
· Power N+M backup · Path MTU Discovery and unknown unicast packet
· Master control, service card hot · MLD and MLD Snooping · Port isolation
swap and service automatic · IPv6 static routing, RIPng, OSPFv3 and · Port security, IP + MAC + port binding
recovery BGP4+ · DHCP Snooping, DHCP Option 82
· Static/LACP link aggregation and · Manual tunnel, ISATAP tunnel and 6- · IEEE 802.1x authentication
cross service card link aggregation to-4 tunnel · Radius and BDTacacs+ authentication
· Ring network protection including · uRPF
EAPS Management and Maintenance · Command line authority control
· VRRP · Console, Telnet and SSH based on user levels
· GR for OSPF and BGP · SNMP v1/v2/v3
· BFD for OSPF and BGP · Upload and download of TFTP files Value-added services
· ISSU · Remote Network Monitoring (RMON) · VSS
· Statistics analysis of sFLOW, Netflow
Energy saving
STP
· 802.1D (STP), 802.1W (RSTP), MPLS VPN · IEEE 802.3az green Efficient Ethernet
802.1S (MSTP)
· Multi-VRF
· BPDU protection, root protection Environment
and ring protection · Operating temperature/humidity:
0°C-40°C ; 10%-90% non-condensing
· Storage temperature/ humidity:
-20°C-70°C ; 5%-95% non-condensing

BDCOM S8500E Series

6
Ordering Information
Item Picture Description
S8503E Series Chassis

Integrated Chassis of S8506E switch (1 fan tray, 3 power slots,no

S8503E
standard power supply, 1 MCU slot, 1 MCU/serivce slot and 1 service slot )

S8503E Series Power Supplies

ES85-PA350 S8503E AC power module 350W

ES85-PD350 S8503E DC power module 350W

S8503E Series MCU Boards

Console Board of S8503E Series with 24 gigabit SFP ports and
ES8503-MSU-24GS8TS
8 10GE SFP+ ports

Console Board of S8503E Series with 24 gigabit RJ45 ports and

ES8503-MSU-24GT8TS
8 10GE SFP+ ports
S8500E Series Chassis
Integrated Chassis of S8506E switch (1 fan tray, 3 power slots,
S8506E
no standard power supply, 2 MCU slots, 4 service slots)

Integrated Chassis of S8510E switch (1 fan tray, 3 power slots,

S8510E
no standard power supply, 2 MCU slots, 8 service slots)
S8500E Series Power Supplies

ES85-PA550 550W AC power module (Full load of 6 line cards)

ES85-PD550 550W DC power module (Full load of 6 line cards)

S8500E Series MCU Boards

ES85-MSU-I/II S8500E type-I/II MCU board

Service Board of S8500E Series

Gigabit Service Boards

ES85-24GS24GT Service board with 24 gigabit SFP ports and 24 gigabit RJ45 ports

ES85-48GT Service board with 48 gigabit RJ45 ports

ES85-48GS Service board with 48 gigabit SFP ports

Gigabit and 10GE Hybrid Service Boards

ES85-24GS8TS Service board with 24 gigabit SFP ports and 8 10GE SFP+ ports

ES85-24GT8TS Service board with 24 gigabit RJ45 ports and 8 10GE SFP+ ports

10GE Service Boards

ES85-16TS Service board with 16 10GE SFP+ ports

ES85-4QS Service board with 4 40GE QSFP ports

BDCOM S8500E Series

7
Ordering Information

Item Description
Optical modules
Gigabit Optical Modules
GSFP-TX-B GE SFP-to-RJ45 module
GSFP-SX-D Gigabit SFP multi-mode (500m, 850nm, LC, DDM)
GSFP-LX-10-D Gigabit SFP single mode (10Km, 1310nm, LC, DDM)
GSFP-LX-20-D Gigabit SFP single mode (20Km, 1310nm, LC, DDM)
GSFP-LX-40-D Gigabit SFP single mode (40Km, 1310nm, LC, DDM)
GSFP-ZX-80-D Gigabit SFP single mode (80Km, 1550nm, LC, DDM)
GSFP-ZX-120-D Gigabit SFP single mode (120Km, 1550nm, LC, DDM)
GSFP-LX-SM1310-10-BIDI Gigabit SFP single mode, single-core bidirectional (10Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-10-BIDI Gigabit SFP single mode, single-core bidirectional (10Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-20-BIDI Gigabit SFP single mode, single-core bidirectional (20Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-20-BIDI Gigabit SFP single mode, single-core bidirectional (20Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-40-BIDI Gigabit SFP single mode, single-core bidirectional (40Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-40-BIDI-1310 Gigabit SFP single mode, single-core bidirectional (40Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1490-80-BIDI Gigabit SFP single mode, single-core bidirectional (80Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-80-BIDI Gigabit SFP single mode, single-core bidirectional (80Km, TX1550/RX1490, LC, DDM)
GSFP-LX-SM1490-120 Gigabit SFP single mode, single-core bidirectional (120Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-120 Gigabit SFP single mode, single-core bidirectional (120Km, TX1550/RX1490, LC, DDM)
10GE optical modules
SFP+SX 10G SFP+ multi-mode (300m, 850nm, LC)
SFP+LX-10 10G SFP+ single mode (10Km, 1310nm, LC, DDM)
SFP+LX-20 10G SFP+ single mode (20Km, 1310nm, LC, DDM)
SFP+LX-40 10G SFP+ single mode (40Km, 1550nm, LC, DDM)
SFP+LX-80 10G SFP+ single mode (80Km, 1550nm, LC, DDM)
SFP+LX-SM-1270-10 10GE SFP+ single mode, single-core bidirectional (10Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-10 10GE SFP+ single mode, single-core bidirectional (10Km, TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-20 10GE SFP+ single mode, single-core bidirectional (20Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-20 10GE SFP+ single mode, single-core bidirectional (20Km, TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-40 10GE SFP+ single mode, single-core bidirectional (40Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-40 10GE SFP+ single mode, single-core bidirectional (40Km, TX1330/RX1270, LC, DDM)
40GE optical modules
QSFP+SR4-100m 40G multi-mode QSFP+ optical module (100m, 850nm, MPO, DDM, supports 1 to 4)
QSFP+LR4-10 40G single-mode QSFP+ optical module (10km, 1310nm, LC, DDM)
QSFP+LR4-20 40G single-mode QSFP+ optical module(20Km, 1310nm, LC, DDM)
QSFP+ER4-40 40G single-mode QSFP+ optical module(40Km, 1310nm, LC, DDM)

Copyright © Shanghai Baud Data Communication Co., Ltd. 2022. All Rights Reserved.
This document is BDCOM Public Information. BDCOM reserves the right to alter, update and
otherwise change the information contained in the document from time to time.
www.bdcom.cn