Pressure

Diaphragm pressure gauge for the process industry

Model 432.50, up to 10-fold overload safety, max. 40 bar
Model 432.30, safety version, up to 10-fold overload safety
WIKA data sheet PM 04.03

for further approvals, see

page 7

Applications
■ For measuring locations with increased overload
■ With liquid-filled case suitability for high dynamic pressure
loads and vibrations (models 433.50, 433.30)
■ For gaseous, liquid and aggressive media, also in aggres-
sive environments
■ With open connecting flange also suitable for contaminat-
ed and viscous media
■ Process industry: Chemical industry, petrochemical indus-
try, oil and gas, power generation, water and wastewater
technology, machine building and general plant construc-
tion

Special features
■ Case and wetted parts from stainless steel
■ Wide choice of special materials
■ High overload safety up to the 10-fold full scale value
■ Process connection thread or open flange
■ Scale ranges from 0 … 16 mbar Diaphragm pressure gauge model 432.50

Description

Diaphragm pressure gauges are preferably used for low For the measurement of highly viscous, crystallising or
pressure ranges. Through the large working surface of the contaminated media, the use of an open connecting flange
circular, corrugated diaphragm element, small pressure is recommended. The open connecting flange has the
ranges can be measured reliably. advantage over a threaded connection that the pressure port
cannot become blocked. With an additional flushing bore on
The diaphragm pressure gauges are manufactured in the open connecting flange, the pressure chamber can be
accordance with EN 837-3. The high-quality design is easily cleaned.
particularly suitable for applications in the chemical and
petrochemical industry, oil and gas industry and power Measuring systems with diaphragm elements, on the
engineering. grounds of their design, offer good protection from overload,
The case and wetted parts from stainless steel fulfil high since the diaphragm can support itself against the upper
requirements for resistance against aggressive media. flange. As standard, this diaphragm pressure gauge already
For especially high resistance requirements, the pressure features an overload safety of 5 times the full scale value.
chamber can be designed with a wide variety of special Versions with higher overload safeties can be realised on
materials such as PTFE, tantalum or Hastelloy. request.

WIKA data sheet PM 04.03 ∙ 12/2021 Page 1 of 10

Data sheets showing similar products:

Stainless steel version, high overload safety; model 432.56; see data sheet PM 04.07
Functionality

Instrument pointer

Dial

Link

Upper measuring flange

Diaphragm element

Sealing
Threaded stud with nut

Media chamber

14520597_2b
Process connection with
lower measuring flange

Diaphragm elements are circular, corrugated diaphragms. They are clamped together at the edge between two flanges and
are subjected to the pressure on one side by the pressure in the media chamber. The resulting deflection is transmitted to the
movement via the link and displayed on the dial with the instrument pointer.

Overload safety
Diaphragm elements have a relatively large actuating force and, due to the annular clamping of the element, they are less
sensitive to vibration in comparison with Bourdon tubes. Diaphragm elements can be subject to higher overload of up to
10 times the full scale value, up to a max. of 40 bar, through load take-up points (by bringing the diaphragm element up against
the upper measuring flange). With a scale range of 0 ... 4 bar and 10-fold overload safety, a short-term overpressure of up to
40 bar is not problematic, as the accuracy is not affected.

Versions for special media

Larger pressure ports, open connecting flanges and purging options can be integrated for measuring highly viscous, contami-
nated or crystallising media.

Coating / Lining of wetted parts

By selecting a coating / lining for the wetted parts, the
Coating of the
instrument can also be used for extremely corrosive media. diaphragm element (red)
The materials suitable for this can either be selected for
the diaphragm element only, or together with the process
connection with lower measuring connection in a freely Sealing
combinable manner. The selection of the material combina-
tion determines whether it is self-sealing or implemented with
a sealing.

Lining (blue) of the pro-

→ Available materials (wetted) see page 3 cess connection with
lower measuring flange

WIKA data sheet PM 04.03 ∙ 12/2021 Page 2 of 10

Specifications

Basic information
Standard
Diaphragm and capsule pressure gauges EN 837-3
→ For information on the “Selection, installation, handling and operation of pressure gauges”, see Technical information IN 00.05.
Nominal size (NS) ■ Ø 100 mm [4"]
■ Ø 160 mm [6"]
Window Laminated safety glass
Case
Design, models 432.50 and 433.50 Safety level “S1” per EN 837-1: With blow-out device
Design, models 432.30 and 433.30 Safety level “S3” per EN 837-1: With solid baffle wall and blow-out back
Material ■ Stainless steel 1.4301 (304)
■ Stainless steel 1.4571 (316 Ti)
Case filling ■ Without
■ Glycerine-water mixture 1)
■ Silicone oil M50 1)
Instruments with case filling with compensating valve to vent case.
Movement Stainless steel

1) Ingress protection IP65 for instruments with case filling

Measuring element
Type of measuring element Diaphragm element
Materials (wetted)
Diaphragm element ■ Stainless steel 316L, for span ≤ 0.25 bar
■ NiCr alloy (Inconel), for span > 0.25 bar

Process connection with lower measuring flange Stainless steel 316L

Coating / Lining 1) 2) ■ Without
■ PTFE
■ Hastelloy
■ Monel
■ Tantalum
■ Gold (only for diaphragm element)
Other materials on request
Sealing 3) FPM/FKM

1) Diaphragm elements and process connections with lower measuring flanges can be coated / lined with various materials.
→ See page 2
2) Accuracy class 2.5 with selection of a coating / lining.
3) The selection of the material combination determines whether it is self-sealing or implemented with a sealing.

Accuracy specifications
Accuracy class ■ 1.6 1)
■ 2.5 2)
Temperature error On deviation from the reference conditions at the measuring system: ≤ ±0.8 % per
10 °C [≤ ±0.8 % per 18 °F] of full scale value
Reference conditions
Ambient temperature +20 °C [68 °F]

1) After feasibility test, if necessary, accuracy class 1.0 is possible.

2) Accuracy class 2.5 with selection of a coating / lining.

WIKA data sheet PM 04.03 ∙ 12/2021 Page 3 of 10

Scale ranges
Scale range Overload safety 1) Vacuum-resist- Scale range Overload safety 1) Vacuum-resist-
ant to -1 bar ant to -1 bar
mbar psi
0 ... 16 ■ 80 Selectable 0 ... 10 ■ 50 Selectable
■ 160 ■ 100
0 ... 25 ■ 125 Selectable 0 ... 15 ■ 75 Selectable
■ 250 ■ 150
0 ... 40 ■ 200 Selectable 0 ... 30 ■ 150 Selectable
■ 400 ■ 300
0 ... 60 ■ 300 Selectable 0 ... 60 ■ 300 Yes
■ 600 ■ 600
0 ... 100 ■ 500 Selectable 0 ... 100 ■ 500 Yes
■ 1,000 ■ 1,000
0 ... 160 ■ 800 Selectable 0 ... 150 ■ 750 Yes
■ 1,600 ■ 1,500
0 ... 250 ■ 1,250 Selectable 0 ... 160 ■ 800 Yes
■ 2,500 ■ 1,600
0 ... 400 ■ 2,000 Selectable 0 ... 200 ■ 1,000 Yes
■ 4,000 ■ 2,000
0 ... 600 ■ 3,000 Selectable 0 ... 250 ■ 1,250 Yes
■ 6,000 ■ 2,500
0 ... 1,000 ■ 5,000 Selectable 0 ... 300 ■ 1,500 Yes
■ 10,000 ■ 3,000
bar 0 ... 400 ■ 2,000 Yes
■ 4,000
0 ... 0.6 ■ 3 Selectable
■ 6
0 ... 1 ■ 5 Selectable
■ 10 +/- scale ranges 2)
0 ... 1.6 ■ 8 Selectable
Scale range
■ 16
mbar bar
0 ... 2.5 ■ 12.5 Selectable
■ 25 -5 ... +20 -1 ... +0.6
0 ... 4 ■ 20 Yes -6 ... +10 -1 ... +1
■ 40
-10 ... +15 -1 ... +1.5
0 ... 6 ■ 30 Yes
■ 40 -15 ... +25 -1 ... +2
0 ... 10 40 Yes -20 ... +40 -1 ... +3
0 ... 16 40 Yes -30 ... +30 -1 ... +5
0 ... 25 40 Yes -40 ... +60 -1 ... +9
-50 ... +200 -1 ... +10
Vacuum scale ranges 2) -60 ... +100 -1 ... +15

Scale range -100 ... +150 -1 ... +24

mbar -125 ... +125 psi
-16 ... 0 -250 ... 0 -150 ... +250 -30 inHg ... +15
-40 ... 0 -400 ... 0 -250 ... +750 -30 inHg ... +60
-60 ... 0 -600 ... 0 -400 ... +600 -30 inHg ... +100
-100 ... 0 -1,000 ... 0 -500 ... +500 -30 inHg ... +160
-160 ... 0 -600 ... +400 -30 inHg ... +200
bar psi -750 ... +250 -30 inHg ... +300
-0.6 ... 0 -15 inHg ... 0 -800 ... +200
-1 ... 0 -30 inHg ... 0

1) The specified values for overload safety and vacuum resistance are only valid for versions without coating / lining.
2) Specifications for overload safety and vacuum resistance on request.

Other scale ranges on request

WIKA data sheet PM 04.03 ∙ 12/2021 Page 4 of 10

 Further details on: Scale ranges
Unit ■ bar
■ psi
■ mbar
■ kg/cm²
■ MPa
■ kPa
Other units on request
Overload safety ■ 5 x full scale value, max. 40 bar
■ 10 x full scale value, max. 40 bar

Vacuum resistance ■ Without

■ Vacuum-resistant to -1 bar

Dial
Scale layout ■ Single scale
■ Dual scale

Scale colour Single scale Black

Dual scale Black/red
Material Aluminium
Customer-specific version Other scales, e.g. with red mark, circular arcs or circular sectors, on request
→ Alternatively, adhesive label set for red and green circular arcs; see data sheet
AC 08.03
Instrument pointer Aluminium, black

Process connection
Standard ■ EN 837
■ ANSI / ASME B1.20.1
■ ASME B16.5
■ EN 1092-1, form B
Size 1)
EN 837 ■ G½B
■ M20 x 1.5

ANSI / ASME B1.20.1 ■ ½ NPT

ASME B16.5 ■ Open connecting flange 1" class 150, RF

■ Open connecting flange 2" class 150, RF
■ Open connecting flange 1" class 300, RF

EN 1092-1, form B ■ Open connecting flange DN 25 PN 40

■ Open connecting flange DN 50 PN 40

Materials (wetted)
Diaphragm element ■ Stainless steel 316L, for span ≤ 0.25 bar
■ NiCr alloy (Inconel), for span > 0.25 bar

Process connection with lower measuring flange Stainless steel 316L

Coating / Lining 2) 3) ■ Without
■ PTFE
■ Hastelloy
■ Monel
■ Tantalum
■ Gold (only for diaphragm element)
Other materials on request
Sealing 4) FPM/FKM

1) Further threaded connections and open connecting flanges per ASME B16.5 / EN 1092-1 form B from DN 15 to DN 80 (→ See data sheet IN 00.10)
2) Diaphragm elements and process connections with lower measuring flanges can be coated / lined with various materials.
→ See page 2
3) Accuracy class 2.5 with selection of a coating / lining.
4) The selection of the material combination determines whether it is self-sealing or implemented with a sealing.

Other process connections on request

WIKA data sheet PM 04.03 ∙ 12/2021 Page 5 of 10

 Operating conditions
Medium temperature range ■ +100 °C [+212 °F] maximum
■ +200 °C [+392 °F] maximum
Ambient temperature range ■ -20 ... +60 °C [-4 ... +140 °F]
■ -40 ... +60 °C [-40 ... +140 °F] 1)
Storage temperature range -40 ... +70 °C [-40 ... 158 °F]
Pressure limitation
Steady Full scale value
Fluctuating 0.9 x full scale value
Ingress protection per IEC/EN 60529 ■ IP54
■ IP65 2)
■ IP66 3) (ingress protection of the case)

1) Only selectable in combination with silicone oil case filling

2) Ingress protection IP65 for instruments with case filling
3) Hermetically sealed case; see data sheet IN 00.18

Other versions
■ Version for hazardous areas (Ex h)
■ Diaphragm pressure gauge with switch contacts, models PGS43.100, PGS43.160; see data sheet PV 24.03
■ Diaphragm pressure gauge with output signal, models PGT43.100, PGT43.160; see data sheet PV 14.03
■ Oil- and grease-free
■ For oxygen, oil- and grease-free
■ Silicone-free
■ Per NACE 1) MR0175 / ISO 15156, use in H₂S-containing environments in oil and gas production
■ Per NACE 1) MR0103 / ISO 17945, metals resistant to sulphide stress cracking
■ With pre-volume deflagration flame arrester 2) for connection to zone 0 (EPL Ga); model 910.21; see data sheet AC 91.02
■ With flushing bore on the open connecting flange

1) General information about NACE standards, see data sheet IN 00.21

2) Only for instruments with Ex approval

WIKA data sheet PM 04.03 ∙ 12/2021 Page 6 of 10

Approvals
Logo Description Region
- CRN Canada
Safety (e.g. electr. safety, overpressure, ...)

Optional approvals
Logo Description Region
EU declaration of conformity European Union
ATEX directive 1)
Hazardous areas
Gas II 2G h IIC T6 … T1 Gb X
Dust II 2D h IIIC T85°C … T450°C Db X
EAC Eurasian Economic
Hazardous areas 1) Community
Ex Ukraine Ukraine
Hazardous areas 1)
PAC Russia Russia
Metrology, measurement technology
PAC Kazakhstan Kazakhstan
Metrology, measurement technology
- MChS Kazakhstan
Permission for commissioning
PAC Belarus Belarus
Metrology, measurement technology
PAC Ukraine Ukraine
Metrology, measurement technology
PAC Uzbekistan Uzbekistan
Metrology, measurement technology
- CPA China
Metrology, measurement technology

1) In the area of the coating / lining from PTFE, measures must be taken, if necessary, in order to exclude electrostatic charging.

Certificates (option)

Certificates
Certificates ■ 2.2 test report per EN 10204 (e.g. state-of-the-art manufacturing, indication accuracy)
■ 3.1 inspection certificate per EN 10204 (e.g. material proof for wetted metal parts, indication
accuracy)
Recommended recalibration interval 1 year (dependent on conditions of use)

For approvals and certificates, see website

WIKA data sheet PM 04.03 ∙ 12/2021 Page 7 of 10

Dimensions in mm [in]
Models 432.50 and 433.50

Only with filled version, model 433.50

14520308.01
SW

Nominal size 100 [4"]

Process Scale Dimensions in mm [in] Weight
connec- range d a b e D1 D2 h±2 SW in kg
tion G [0.08] [lb]
G½B ≤ 0.25 bar 160 [6.3} 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 101 [3.98] 99 [3.90] 119 [4.69] 22 [0.87] 2.5 [5.5]
[3.63 psi]
> 0.25 bar 100 [3.94] 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 101 [3.98] 99 [3.90] 117 [4.61] 22 [0.87] 1.3 [2.9]
[3.63 psi]
½ NPT ≤ 0.25 bar 160 [6.3} 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 101 [3.98] 99 [3.90] 118 [4.65] 22 [0.87] 2.5 [5.5]
[3.63 psi]
> 0.25 bar 100 [3.94] 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 101 [3.98] 99 [3.90] 116 [4.57] 22 [0.87] 1.3 [2.9]
[3.63 psi]

Nominal size 160 [6"]

Process Scale Dimensions in mm [in] Weight
connec- range d a b e D1 D2 h±2 SW in kg
tion G [0.08] [lb]
G½B ≤ 0.25 bar 160 [6.3} 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 161 6.34] 159 [6.26] 149 [5.87] 22 [0.87] 2.9 [6.4]
[3.63 psi]
> 0.25 bar 100 [3.94] 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 161 6.34] 159 [6.26] 147 [5.79] 22 [0.87] 1.7 [3.7]
[3.63 psi]
½ NPT ≤ 0.25 bar 160 [6.3} 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 161 6.34] 159 [6.26] 148 [5.83] 22 [0.87] 2.9 [6.4]
[3.63 psi]
> 0.25 bar 100 [3.94] 15.5 [0.61] 49.5 [1.95] 17.5 [0.69] 161 6.34] 159 [6.26] 146 [5.75] 22 [0.87] 1.7 [3.7]
[3.63 psi]

WIKA data sheet PM 04.03 ∙ 12/2021 Page 8 of 10

Models 432.30 and 433.30

Only with filled version, model 433.30

14520311.01
SW

Nominal size 100 [4"]

Process Scale Dimensions in mm [in] Weight
connec- range d a b e D1 D2 h±2 SW in kg
tion G [0.08] [lb]
G½B ≤ 0.25 bar 160 [6.3} 24.5 [0.96] 59 [2.32} 17.5 [0.69] 101 [3.98] 99 [3.90] 119 [4.69] 22 [0.87] 2.5 [5.5]
[3.63 psi]
> 0.25 bar 100 [3.94] 24.5 [0.96] 59 [2.32} 17.5 [0.69] 101 [3.98] 99 [3.90] 117 [4.61] 22 [0.87] 1.3 [2.9]
[3.63 psi]
½ NPT ≤ 0.25 bar 160 [6.3} 24.5 [0.96] 59 [2.32} 17.5 [0.69] 101 [3.98] 99 [3.90] 118 [4.65] 22 [0.87] 2.5 [5.5]
[3.63 psi]
> 0.25 bar 100 [3.94] 24.5 [0.96] 59 [2.32} 17.5 [0.69] 101 [3.98] 99 [3.90] 116 [4.57] 22 [0.87] 1.3 [2.9]
[3.63 psi]

Nominal size 160 [6"]

Process Scale Dimensions in mm [in] Weight
connec- range d a b e D1 D2 h±2 SW in kg
tion G [0.08] [lb]
G½B ≤ 0.25 bar 160 [6.3} 27 [1.06] 65 [2.56] 17.5 [0.69] 161 6.34] 159 [6.26] 149 [5.87] 22 [0.87] 2.9 [6.4]
[3.63 psi]
> 0.25 bar 100 [3.94] 27 [1.06] 65 [2.56] 17.5 [0.69] 161 6.34] 159 [6.26] 147 [5.79] 22 [0.87] 1.7 [3.7]
[3.63 psi]
½ NPT ≤ 0.25 bar 160 [6.3} 27 [1.06] 65 [2.56] 17.5 [0.69] 161 6.34] 159 [6.26] 148 [5.83] 22 [0.87] 2.9 [6.4]
[3.63 psi]
> 0.25 bar 100 [3.94] 27 [1.06] 65 [2.56] 17.5 [0.69] 161 6.34] 159 [6.26] 146 [5.75] 22 [0.87] 1.7 [3.7]
[3.63 psi]

WIKA data sheet PM 04.03 ∙ 12/2021 Page 9 of 10

 Accessories and spare parts

Model Description Order number

910.33 Adhesive label set for red and green circular arcs -
→ See data sheet AC 08.03
NS 100 [4"] 14238945
NS 160 [6"] 14228352

910.17 Sealings On request

→ See data sheet AC 09.08

910.15 Syphons On request

→ See data sheet AC 09.06

910.13 Overpressure protector On request

→ See data sheet AC 09.04

IV20, IV21 Block-and-bleed valve On request

→ See data sheet AC 09.19

IBF2, IBF3 Monoblock with flange connection On request

→ See data sheet AC 09.25

910.16 Mounting parts for wall and pipe mounting On request

Instrument mounting bracket and adapter piece
→ See data sheet AC 09.07

Ordering information
Model / Nominal size / Scale range / Process connection / Connection location / Options

© 10/2008 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.

WIKA data sheet PM 04.03 ∙ 12/2021 Page 10 of 10

12/2021 EN

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30
63911 Klingenberg/Germany
Tel. +49 9372 132-0
Fax +49 9372 132-406
[email protected]
www.wika.de