Technical Data Sheet
LUBIMAXTM 5535
Viscosity Index Improver
Description:
LUBIMAXTM 5535 is a shear stable amorphous olefin copolymer intended to be used as a Viscosity
Index Improver when formulating multi-grade crankcase and industrial oils. This viscosity modifier
combines excellent viscometric effectiveness with high oxidation stability. LUBIMAXTM 5535 has very
good low temperature properties when combined with suitable pour point depressant.
Application:
• High thickening efficiency
• Excellent cold crank simulator (CCS) result
• Good high temperature and high shear (HTHS) viscosity
• Improved oxidation stability compared to non OCP
• Cost-efficient
Characteristics:
Properties Units Typical Value
Kinematic Viscosity of 10.0 wt% of polymer in Chevron 5R cSt 1,200
Kinematic Viscosity of 1.1 wt% of polymer in Chevron 5R cSt 10.6
DIN SSI % 35
Ethylene content % 49
MWD - Narrow/linear
Note: The above-mentioned properties are typical unless indicated otherwise, these are not considered as delivery specification
Product performance:
LUBIMAXTM 5535 BLEND VISCOSITY LUBIMAXTM 5535 CONCENTRATE VISCOSITY
20 2500
Kinematic Viscosity @ 100°C (cSt)
Kinematic Viscosity @100°C (cSt)
2000
16
1500
12
1000
8 500
0
4
8 9 10 11 12
0.5 0.7 0.9 1.1 1.3 1.5
Polymer Content (wt%) Polyer Content (wt%)
Esso 150SN 4 cSt b.o
5 cSt b.o 6 cSt b.o LUBIMAX 5535
7 cSt b.o
Ver.19/08
Figure 1 LUBIMAXTM 5535 in different base Figure 2 LUBIMAXTM 5535 in Esso SN150
oils
Visit www.lubimax.com for more information Page 1 / 2
Research and Development Headquarters; Coraplus Pte. Ltd., Manulife Tower, Singapore Tel: +65 6694 8800
Official representative in the Middle East, Africa and Europe:
Kemipex FZE, P.O. Box 24200, Dubai, UAE Tel: +971 (4) 320 5000 Fax: +971 (4) 327 3110
Technical Data Sheet
LUBIMAXTM 5535
Typical Properties of 10.0%wt LUBIMAXTM 5535 Dissolved in ExxonMobil 150N:
Parameter Test Method Typical Value
Color ASTM D1500 3.0 Max
Density @ 15°C, kg/m3 ASTM D4052 858.0
Flash Point, °C (PMCC) ASTM D93 135 Min
Kinematic Viscosity at 100°C, cSt ASTM D445 1,110
Kinematic Viscosity at 40˚C, cSt ASTM D445 15,000
SSI (Bosch), % TP Loss ASTM D6278 35
Packaging and Handling:
Product is packed in silicon coated boxes with net weight of 50 lbs each (22.7 kg), stacked on pallets
wrapped with stretch film.
Store in a dry, dark area that prevent the exposure to direct light.
Storage temperature should not exceed 40⁰C.
The product has a minimum shelf life of 36 months at ambient temperature of 10 – 40⁰C.
For details of health and safety precautions, please see the related Material Safety Data Sheet.
Ver.19/08
Visit www.lubimax.com for more information Page 2 / 2
Research and Development Headquarters; Coraplus Pte. Ltd., Manulife Tower, Singapore Tel: +65 6694 8800
Official representative in the Middle East, Africa and Europe:
Kemipex FZE, P.O. Box 24200, Dubai, UAE Tel: +971 (4) 320 5000 Fax: +971 (4) 327 3110
