ACADEMIC AFFAIRS OFFICE

INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

No. Acd./ .50Sb f1APC-131 Dated: September 2(; ,2023

Head, Department of Electrical Engineering

The IAPC in its 131 st meeting held on 12.07.2023 vide Item No. 131.2.2 (5) approved
the syllabi of following courses for new UG Curriculum of Department of Electrical
Engineering:

1. EEC-1 01: Programming with C++ (PCC)

2. EEC-102: Basic Electrical Science (peC)
3. EEC-104: Signals and Systems (PCC)
4. EEC-201: Network Theory (PCC)
5. EEE-1 01: Control System Engineering (ESC)
6. EEE-102: Basic Electrical Engineering (ESC)
7. EEE-103: Measurements and Transducers (ESC)

The modified syllabi are attached as Appendix-A.

W
Deputy Registrar

Encl. Appendix-A

Copy to (through e mail):-

1. All faculty
2. Chairperson , DAPC of Department of Electrical Engineering
3. Dean, Academic Affairs
4. Associate Dean of Academic Affairs (Curriculum)
5. Channel if AIS (acad.iitr.ac.in)f Academic webpage of iitr.ac.in
 Appendix-A

INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE/SCHOOL: Department of Electrical Engineering

1. Subject Code: EEC-101 Course Title: Programming with C++

2. Contact Hours: L: 3 T: 0 P: 2
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 10-25 PRS: 25 MTE: 15-25 ETE: 30-40 PRE: 0
5. Credits: 4 6. Semester: Autumn 7. Subject Area: PCC
8. Pre-requisite: Nil
9. Objective: To familiarize the students with the fundamentals of programming in C++ and the concepts of
object oriented programming (OOPS).

10. Details of the Course

S.No. Contents Contact

hours
1. Basic Programming in C++: Concepts of algorithm & flow charts; Input/output, 9
constants, variables, expressions and operators; Naming conventions and styles;
Conditions and selection statements; Looping and control structures (while, for, do-
while, break and continue); File I/O, header files, string processing; Pre-processor
directives such as #include, #define, #ifdef, #ifndef; Compiling and linking.
2. Programming through Functional Decomposition: Functions (void and value 10
returning), parameters, scope and lifetime of variables, passing by value, passing by
reference, passing arguments by constant reference; Design of functions and their
interfaces (concept of functional decomposition), recursive functions; Function
overloading and default arguments; Library functions; Matters of style, naming
conventions, comments.
3. Aggregate Data-types: Arrays and pointers; Structures; Dynamic data and pointers, 4
dynamic arrays.
4. Object Oriented Programming Concepts: Data hiding, abstract data types, classes 12
and access control; Class implementation-default constructor, constructors, copy
constructor, destructor, operator overloading, friend functions; Introduction to
Templates
5. Object Oriented Design: Inheritance and composition; Dynamic binding and 7
virtual functions; Polymorphism; Dynamic data in classes.
Total 42

11. Suggested Books:

S.No. Name of Authors/Book/Publisher Year of

Publication / Reprint
1. Dietel H.M. & Dietel P.J., “C ++ How to Program”, Prentice Hall 2011
Publications, 8th Edition.
2. Nell Date, Chip Weems, Mark Headington, “Programming and 2000
Problem Solving with C++”, CBS Publishers and Distribution.

A1
3. Cohoon J.P. & Davidson, J.W., “C++ Program Design”, McGraw 2002
Hill, 3rd Edition.
4. David Gries, “The Science of Programming”, Springer. 1987
5. Dromey, “How to Solve it by Computer”, Prentice Hall of India, 8th 1996
Edition.

A2
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE/SCHOOL: Department of Electrical Engineering

1. Subject Code: EEC-102 Course Title: Basic Electrical Science

2. Contact Hours: L: 2 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 20-35 PRS: 0 MTE: 20-30 ETE: 40-50 PRE: 0
5. Credits: 3 6. Semester: Spring 7. Subject Area: PCC
8. Pre-requisite: Nil
9. Objective: To introduce the fundamentals of Electrical Engineering.
10. Details of the Course

S.No. Contents Contact

hours
1. Introduction: DC and AC sources, voltage and current sources; independent
and dependent source, Source Transformation. Network elements: lumped and 2
distributed; linear and non-linear; active and passive; unilateral and bilateral.
2. AC and DC circuits: Introduction to phasors, concept of
Impedance/Admittance in AC circuit, Star-Delta transformation, Circuit
4
analysis using mesh and node methods, Series, Parallel and Series-Parallel
resonance, and basic filters. Concept of complex power in AC circuits.
3. Electrical Power Generation: Generation of electrical power, Conventional
power generation - Hydro, Thermal, Nuclear and Gas Power. Types of
Turbines, Working principle of Steam, Hydro and Gas turbines, Renewable
energy generation.
Electrical Power Transmission: Purpose of transmitting power, AC
6
transmission voltage levels, Power transformer, Transmission lines, Single line
diagram of the power transmission network, Transmission substation,
Protective equipment used in the network, HVDC Transmission.
Electrical Power Distribution: Distribution network and substation,
Overhead lines and underground cables, Protective equipment.
4. Energy stored in electric and magnetic fields, energy conversion in single and
4
multi-excited systems and torque production
5. Generating and motoring operations, Introduction to convertors, Introduction
4
to EV and traction systems.
6. Basics of electrical measurements and measuring instruments, Introduction and
4
principle of sensors and transducers
7. Basics of open and closed loop control system, Introduction to time domain
4
analysis.
Total 28

A3
11. Suggested Books:

S.No. Name of Authors/Book/Publisher Year of

Publication / Reprint
1. Beaty H.W., Fink D.G., “Standard Handbook for Electrical 2007
Engineers”, McGraw Hill 15th Edition.
2. Singh, S.N., “Electric Power Generation, Transmission and 2010
Distribution”, Prentice Hall of India, 2nd Edition.
3. Das Kamalesh, “Electrical Power Systems for Industrial Plants”, 2011
JAICO Publishing House.
4. Jelley N., Andrews J., “Energy Sciences – Principles, 2011
Technologies, and Impacts”, Oxford University Press.
5. Mullin Ray C., “Electrical Wiring Residential”, Delmar 1993
Publishers Inc., 11th Edition.
6. Nagrath I. J. and Gopal M., “Control System Engineering”, 5th 2011
Ed., 2011 New Age International.
7. Fitzgerald A. E., Kingsley C. and Kusko A., “Electric 2008
Machinery”, 6th 2008 Ed., McGraw-Hill International Book
Company.

A4
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE: Department of Electrical Engineering

1. Subject Code: EEC-104 Course Title: Signals and Systems

2. Contact Hours: L: 3 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 20-35 PRS: 0 MTE: 20-30 ETE: 40-50 PRE: 0
5. Credits: 4 6. Semester: Spring 7. Subject Area: PCC
8. Pre-requisite: Nil
9. Objective: To introduce signals and systems characteristics and analysis.

10. Details of the Course

Contact
S.No. Contents
hours
1. Introduction: Size of a signal, classification of signals, elementary signals, signal
operations, signal models, even and odd functions, systems, classification of 3
systems, properties of systems, system model.
2. Linear Time-Invariant Systems: Properties of linear, time – invariant systems,
convolution, interconnection of LTI systems, zero- input response, zero state
5
response, impulse response, and stability, systems represented by differential and
difference equations.
3. Fourier Representations of Continuous – Time Signals: Signals and vectors,
correlation, orthogonal set, continuous – time Fourier series, trigonometric and
9
exponential Fourier series, continuous – time Fourier transform, properties, Parseval
relationships, Fourier transform properties.
4. Fourier Representations of Discrete – Time Signals: Sampling, discrete – time
signals, models, operations, discrete – time systems, zero input response, zero state
9
response, stability, discrete – time Fourier series, discrete – time Fourier transform,
reconstruction of continuous – time signals from samples, interpolation.
5. Laplace Transform: Properties, solution of differential and integro-differential
equations, bilateral Laplace transform, transfer function, causality and stability, 8
continuous – time second order systems, poles and zeros.
6. Z-Transform: Properties, region of convergence, solution of linear difference
equations, system realization, bilateral transfer function, causality and stability,
8
poles and zeros, Z- transform connection between the Laplace and Z- transform,
sampled-data systems.
Total 42

A5
11. Suggested Books:

S.No. Name of Authors/Book/Publisher Year of

Publication / Reprint
1. Oppenheim A.V., Willsky A.S., Nawab S.H., “Signals and Systems”,
2015
2nd edition, Prentice Hall.
2. Haykin S., Veen B.V., “Signals and Systems”, 2nd edition, John
2007
Wiley.
3. Lathi B.P., “Principles of Signal processing and Linear Systems”,
2009
Oxford International Version.
4. Lee E.A., Varaiya P., “Structure and Interpretation of Signals and
2011
Systems”, 2nd edition, Addison-Wesley.
5. Hsu H.P., “Schaum’s Outline of Signals and Systems, 3rd edition,
2013
McGraw Hill Education.

A6
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE/SCHOOL: Department of Electrical Engineering

1. Subject Code: EEC-201 Course Title: Network Theory

2. Contact Hours: L: 3 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 20-35 PRS: 0 MTE: 20-30 ETE: 40-50 PRE: 0
5. Credits: 4 6. Semester: Autumn 7. Subject Area: PCC
8. Pre-requisite: Nil
9. Objective: To introduce the fundamentals of network analysis using matrices, two-port networks,
analysis of three-phase ac circuits and Basic Magnetic Circuits.

10. Details of the Course

S.No. Contents Contact

Hours
1. Network Topology: Concept of network graphs, Tree, Link, and Cut set. 6
Network Matrices: Node Incidence matrix, Loop Incidence matrix, Cut-Set
incidence matrix. Network analysis using network incidence matrices.
2. Network Theorems: Thevenin's, Norton's, Superposition, Maximum power 8
transfer theorem, Compensation, Reciprocity and Tellegen's theorems for DC and
AC circuits.
3. Transient Network Analysis: Response of RL, RC and RLC networks using 6
Laplace Transforms for unit step, impulse, ramp inputs and AC signals.
4. Single and Two-Port Networks and their Characterization: Driving point 6
impedances, Open-circuit (Z), Short-circuit (Y), Hybrid (h) and Transmission (t)
parameters. Series, Parallel, Series-Parallel and Tandem connections of two-port
networks. Terminated two-port networks.
5. Three-Phase A.C. Circuit Analysis: Analysis of balanced and unbalanced three- 8
phase networks; Introduction to Symmetrical components;
6. Analysis of AC circuits with non-sinusoidal inputs. 2
7. Introduction to Magnetic Circuits: Magnetic fields and flux, Magnetomotive 6
force (MMF), Reluctance, Air gaps, Ohm's law for magnetic circuits, Series,
Parallel and series-parallel magnetic circuit calculations. Magnetically coupled
coils, dot convention, equivalent circuits of coupled coils for AC (phasor) and
transient analysis (s-domain).
Total 42

11. Suggested Books:

S.No. Name of Authors/ Books/Publishers Year of

Publication/ Reprint
1. DeCarlo R. A. and Lin Pen-Min, "Linear Circuit Analysis", 2nd 2001
Ed., Oxford University Press.
2. Hayt W. H., Kemmerly J. E. and Durbin S. M., "Engineering 2019
Circuit Analysis", 9th Ed., Tata McGraw-Hill Publishing Company
Ltd.
3. Valkenberg V., "Network Analysis", 3rd Ed., Prentice Hall 2007
International Edition.

A7
4. Alexander C.K., Sadiku M.N.O., "Fundamentals of Electric 2022
Circuits", 7th Ed., McGraw Hill Indian Edition.
5. J. David Irwin J.D., Nelms R.M.," Basic Engineering Circuit 2021
Analysis", 12th Ed., John Wiley and Sons,

A8
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE: Department of Electrical Engineering

1. Subject Code: EEE-101 Course Title: Control System Engineering

2. Contact Hours: L: 3 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 20-35 PRS: 0 MTE: 20-30 ETE: 40-50 PRE: 0
5. Credits: 4 6. Semester: Both 7. Subject Area: ESC
8. Pre-requisite: Nil
9. Objective: To introduce the fundamentals of control systems engineering in continuous time domain.

10. Details of the Course

S.No. Contents Contact

hours
1. Introduction to Controls: Historical development of control theory, notion of
3
feedback and its necessity, difference between open-loop and closed-loop systems.
2. Mathematical modeling of systems, linear and nonlinear models, concept of
linearization, notion of block diagram, notion of signal flow, concept of transfer 6
functions
3. Introduction to first and second order systems, transient response of first and
second-order systems, steady-state error analysis, concept of peak overshoot,
5
settling time, effect of addition of poles and zeros to the transfer function of the
system.
4. Concept of stability, BIBO stability, asymptotic stability, characteristic equation of
the system, criterion to detect stability: Routh-Hurwitz criterion, root locus 6
technique.
5. Frequency response of systems, Bode plots, gain margin and phase margin, polar
8
plot, Nyquist plot and Nyquist stability criterion.
6. Basics of P, PI, PID controllers and Lead-lad compensators, design of lead-lag
5
compensators
7. Various forms of state space realization, solution of state equations, minimal
realization, controllability and observability, pole placement using state feedback 9
control.
Total 42

11. Suggested Books:

S.No. Name of Authors/Book/Publisher Year of

Publication / Reprint
1. M. Gopal, Control Systems: Principles and Design, McGraw Hill, 4 th
2012
Edition
2. K. Ogata, Modern Control Engineering, Pearson, 5th Edition 2015
3. N. Nise, Control Systems Engineering, Wiley India, 6th Edition 2018
4. G.F.Franklin, J.D. Powell, A.E. Naeini, Feedback Control of
2021
Dynamical Systems, Pearson, 8th Edition

A9
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE/SCHOOL: Department of Electrical Engineering

1. Subject Code: EEE-102 Course Title: Basic Electrical Engineering

2. Contact Hours: L: 3 T: 1 P: 2/2
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 15-30 PRS: 20 MTE: 15-25 ETE: 30-40 PRE: 0
5. Credits: 4 6. Semester: Both 7. Subject Area: ESC
8. Pre-requisite: Nil
9. Objective: To familiarize the students with the fundamentals of electrical engineering.

10. Details of the Course

S.No. Contents Contact

Hours
1. Power Generation, Transmission, and Distribution: Conventional energy 12
resources (thermal and hydro power generation), Renewable resources (Solar
PV and wind power generation systems), Power transmission and distribution
systems, substation components, concepts of voltage, current, power, power
factor and Types of energy tariffs
2. Electrical Machines: Introduction to magnetic circuit and DC Machine, 10
Transformer: voltage and current transformation, efficiency, and regulation.
Induction Motors: Working principle and speed control.
Alternator (synchronous generator): EMF generation, Operation and control.
3. Feedback Control System: Open and closed loop control, Transfer function 10
and response of second order systems, Introduction to P, PI, and PID controllers.
4. Sensors and Transducers: Electric measurements meters, transducers and 10
sensors (temperature, humidity, displacement, torque, stress, strain, etc.).
42

11. List of experiments:

1. Perform load test on single –phase transformer to determine its efficiency and voltage
regulation
2. Starting and load test on three-phase induction motor
3. Determine no-load and load characteristics of Alternator
4. Measurement of power, power factor, and energy in AC systems
5. Closed loop temperature control of furnace/oven
6. Determine Characteristics of LVDT transducer

A10
12. Suggested Books:

S.No. Name of Authors /Books/Publishers Year of

Publication/ Reprint
1. B. M. Weedy, B. J. Cory, N. Jenkins, Janaka B. Ekanayake, and 2012
Goran Strbac, Electric Power Systems, 4th Ed., John Wiley and Sons,
West Sussex, United Kingdom.
2. C. L. Wadhwa, Electrical Power System, New Age Techno Press, 2010
New Delhi.
3. Chapman, Stephen, J., “Electric Machinery Fundamentals”, McGraw 1985
Hill Book Company.
4. Katsuhiko Ogata , “Modern Control Engineering” Fifth Edition, 2010
Prentice Hall
5. Docbelin E.O., “Measurement Systems: Application and Design”, 1990
McGraw Hill,

A11
 INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

NAME OF DEPARTMENT/CENTRE/SCHOOL: Department of Electrical Engineering

1. Subject Code: EEE-103 Course Title: Measurements and Transducers

2. Contact Hours: L: 3 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weightage: CWS: 20-35 PRS: 0 MTE: 20-30 ETE: 40-40 PRE: 0
5. Credits: 4 6. Semester: Both 7. Subject Area: ESC
8. Pre-requisite: Nil
9. Objective: To impart knowledge of measuring instruments and transducers.

10. Details of the Course

S.No. Contents Contact

Hours
1. Introduction: SI units, introduction of Electrical measuring Instrument, static 3
electrical instruments.
2. Analog and Electronic Instruments: Ammeters, Voltmeters, Watt meters and 9
Energy Meters: Review of PMMC and moving iron instruments; Electro-dynamic
and electrostatic meters; Induction wattmeters, errors and their compensation, multi-
element wattmeter. Induction energy meter, calibration devices, errors and their
compensation, digital voltmeter and multimeter, accuracy and resolution
considerations, comparison with analog electronic instruments.
3. Resistance Measurement: Measurement of low, medium and high resistances, 4
measurement of volume and surface resistivity.
4. Transducers: Basics of transducer, sensor and actuator; Active and passive 7
transducers, generating and parametric transducers; Analog, digital and pulse outputs
of sensors; Static characteristics of transducer and transducer system
5. Measurement of Displacement and Strain: Resistive, inductive and capacitive 6
transducers for displacement; Wire, metal film and semiconductor strain gauges.
6. Measurement of Force and Pressure: Column, ring and cantilever-beam type load 6
cells; Elastic elements for pressure sensing.
7. Measurement of Temperature: Resistance temperature detector, NTC and PTC 7
thermistors, Seebeck effect, thermocouple and thermopile.
Total 42

A12
11. Suggested Books:

S.No. Name of Authors /Books / Publishers Year of

Publication/ Reprint
1. Golding E. W. and Widdis F. C., “Electrical Measurements and 1994
Measuring Instruments”, 5th Ed., A.H. Wheeler and Company.
2. Doebelin E. O. and Manik D. N., “Measurement Systems”, 5th Ed., 2008
Tata McGraw-Hill Publishing Company Limited.
3. Tumanski S., “Principles of Electrical Measurement ”, CRC Press, 2006
Taylor and Francis.
4. Morris A. S., “Measurements and Instrumentation Principle”, 3rd 2001
Edition, Butterworth-Heinemann.
5. Rangan C. S., Sarma G. R. and Mani V. S. V., “Instrumentation 2008
Devices and Systems”, 2nd Ed., Tata McGraw-Hill Publishing
Company Limited.
6. Cooper W. D. and Helfrick A. D, “Modern Electronic Instrumentation 2008
and Measurement Techniques”, Pearson Education.
7. Oliver B. M. and Cage J. M., “Electronic Measurement and 1983
Instrumentation”, McGraw-Hill International Book Company.
8. Anand M. M. S., “Electronic Instruments and Instrumentation 2008
Technology”, Pearson Education.

A13