Data sheet 6ES7151-3AA23-0AB0
SIMATIC DP, INTERFACE MODULE IM151-3 PN ST FOR ET200S;
TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 POWER,
ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH
CONNECTABLE; 2X BUS INTERFACING VIA RJ45 INCL.
TERMINATING MODULE
Configuration control
via dataset Yes
Supply voltage
Mains buffering
● Mains/voltage failure stored energy time 20 ms
Input current
from supply voltage 1L+, max. 200 mA
Power loss
Power loss, typ. 3.3 W
Address area
Addressing volume
● Inputs 256 byte
● Outputs 256 byte
Interfaces
Number of PROFINET interfaces 1
PROFINET IO
● Autocrossing Yes
6ES7151-3AA23-0AB0 Subject to change without notice
Page 1/3 11/21/2017 © Copyright Siemens
● automatic detection of transmission rate Yes
● Transmission rate, max. 100 Mbit/s
● RJ 45 Yes; 2 x
Protocols
Supports protocol for PROFINET IO Yes
MRP Yes
Protocols (Ethernet)
● TCP/IP No
● SNMP Yes
● LLDP Yes
● ping Yes
● ARP Yes
PROFINET IO Device
Services
— Isochronous mode No
— IRT Yes
— Prioritized startup Yes
— Shared device Yes
— Number of IO Controllers with shared 2
device, max.
Interrupts/diagnostics/status information
Diagnostics indication LED
● Bus fault BF (red) Yes
● Group error SF (red) Yes
● Monitoring 24 V voltage supply ON (green) Yes
● Connection to network LINK (green) Yes
Potential separation
between backplane bus and electronics No
between supply voltage and electronics No
between Ethernet and electronics Yes
Permissible potential difference
between different circuits 75 V DC/60 V AC
Isolation
Isolation tested with 500 V
Standards, approvals, certificates
CE mark Yes
UL approval Yes
Ambient conditions
Ambient temperature during operation
6ES7151-3AA23-0AB0 Subject to change without notice
Page 2/3 11/21/2017 © Copyright Siemens
● min. 0 °C
● max. 60 °C
Dimensions
Width 60 mm
Height 119.5 mm
Depth 75 mm
Weights
Weight 150 g
last modified: 11/21/2017
6ES7151-3AA23-0AB0 Subject to change without notice
Page 3/3 11/21/2017 © Copyright Siemens
