4-734-614-11(1)

Television Parts and Controls

Operating Instructions Watching TV

Navigating through Home Menu

Viewing Pictures from Connected

Equipment

Additional Information

KLV-40R352F / 32R326F / 32R302F

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Viewing Pictures from
Connected Equipment
Parts and Controls Connection Diagram . . . . . . . . . . . . . . . . 20
TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Audio and Video Equipment . . . . .22
Remote Control . . . . . . . . . . . . . . . . . . . . . 8
Additional Information
Watching TV Installing the TV to the Wall . . . . . . . . . . .23
Changing the Viewing Style . . . . . . . . . . 10 Troubleshooting . . . . . . . . . . . . . . . . . . . .27
Changing the Wide Mode . . . . . . . . . . . . . . 10 Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting Scene Select . . . . . . . . . . . . . . . . . . . 10 Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Navigating through Home Specifications . . . . . . . . . . . . . . . . . . . . . 28
Menu
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . .11
Applications . . . . . . . . . . . . . . . . . . . . . . . .11
Using the TV as a Photo Frame Mode. . . . . 11
Listening to FM Radio. . . . . . . . . . . . . . . . . . 12
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playback Photo/Music/Video via USB . . . . 12
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
System Settings . . . . . . . . . . . . . . . . . . . . . . 14
Customer Support . . . . . . . . . . . . . . . . . . . . 19

2GB
Introduction Installation/Set-up
Thank you for choosing this Sony product. Install and use the TV set in accordance with the instructions
Before operating the TV, please read this manual thoroughly and below in order to avoid any risk of fire, electric shock or damage
retain it for future reference. and/or injuries.
Apparatus connected to the protective earthing of the building
Note installation through the mains connection or through other
• Before operating the TV, please read the “Safety Information” apparatus with a connection to protective earthing – and to a
(page 3). television distribution system using coaxial cable, may in some
• Instructions about “Installing the TV to the Wall” are included circumstances create a fire hazard. Connection to a television
within this TV’s instructions manual. distribution system therefore has to be provided through a device
• Images and illustrations used in the Setup Guide and this providing electrical isolation below a certain frequency range
manual are for reference only and may differ from actual (galvanic isolator, see EN 60728-11).
product.
Installation
• The TV set should be installed near an easily accessible AC
Attaching the Table-Top Stand to the TV power outlet (mains socket). GB
Refer to the Setup Guide on top of the cushion. • Place the TV set on a stable, level surface to prevent it from
falling over and causing personal injury or property damage.
• Install the TV so that the TV's Table-Top Stand does not
protrudes out from the TV stand (not supplied). If the Table-Top
Stand protrudes out from the TV stand, it may cause TV set to
topple over, fall down, and cause personal injury or damage to
the TV.

Location of the identification label

Labels for the TV Model No. and Power Supply rating are located
on the rear of the TV.
Labels for the AC adapter Model No. and Serial No. are located on
the bottom of the AC adapter.

Safety Information
WARNING
• Only qualified service personnel should carry out wall-mount
Caution installations.
Risk of explosion if the battery is replaced by an incorrect type. • For safety reasons, it is strongly recommended that you use
Batteries must not be exposed to excessive heat such as Sony accessories, including:
sunshine, fire or the like or extremely low air pressure that can Wall-Mount Bracket: SU-WL450
result in an explosion or leakage of flammable liquid or gas. • Be sure to use the screws supplied with the Wall-Mount Bracket
Stability Hazard when attaching the Wall-Mount Bracket to the TV set. The
The television set may fall, causing serious personal injury or supplied screws are designed as indicated by illustration when
death. measured from the attaching surface of the Wall-Mount Bracket.
Never place a television set in an unstable location. A television The diameter and length of the screws differ depending on the
set may fall, causing serious personal injury or death. Many Wall-Mount Bracket model.
injuries, particularly to children, can be avoided by taking simple Use of screws other than those supplied may result in internal
precautions such as: damage to the TV set or cause it to fall, etc.
 Using cabinets or stands recommended by the manufacturer
8 mm - 12 mm
of the television set.
 Only using furniture that can safely support the television set.
 Ensuring the television set is not overhanging the edge of the
supporting furniture. Screw (M4)
 Not placing the television set on tall furniture (for example, Wall-Mount Bracket
cupboards or bookcases) without anchoring both the
TV’s rear cover
furniture and the television set to a suitable support.
 Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
 Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.

3GB
Transporting  Do not install the TV set as shown below.
• Before transporting the TV set, disconnect all cables. Air circulation is blocked.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
Wall Wall

AC power cord (mains lead)

Handle the AC power cord (mains lead) and outlet (mains socket)
as follows in order to avoid any risk of fire, electric shock or
• When transporting the TV set, do not subject it to jolts or damage and/or injuries:
excessive vibration.  The shape of AC power plug (mains plug), which is supplied
• When transporting the TV set for repairs or when moving, pack with the TV set, varies depending on the region. Be sure to
it using the original carton and packing material. connect the appropriate supplied AC power cord (mains lead)
with the plug that fits into the AC power outlet (mains socket).
Topple prevention  Use only Sony supplied AC power cords (mains lead), not those
8 mm - 12 mm of other brands.
 Insert the plug fully into the AC power outlet (mains socket).
 Operate the TV set on a 100 V - 240 V AC supply only.
 When wiring cables, be sure to unplug the AC power cord
(mains lead) for your safety and take care not to catch your feet
M4 Screw (not
on the cables.
supplied)
 Disconnect the AC power cord (mains lead) from the AC power
outlet (mains socket) before working on or moving the TV set.
 Keep the AC power cord (mains lead) away from heat sources.
 Unplug the AC power plug (mains plug) and clean it regularly. If
the plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.

Screw (not
Note
supplied) • Do not use the supplied AC power cord (mains lead) on any
other equipment.
Cord (not supplied)
• Do not pinch, bend, or twist the AC power cord (mains lead)
Ventilation excessively. The core conductors may be exposed or broken.
• Never insert anything in the cabinet. • Do not modify the AC power cord (mains lead).
• Leave space around the TV set as shown below. • Do not put anything heavy on the AC power cord (mains lead).
• It is strongly recommended that you use a Sony Wall-Mount • Do not pull on the AC power cord (mains lead) itself when
Bracket in order to provide adequate air circulation. disconnecting the AC power cord (mains lead).
• Do not connect too many appliances to the same AC power
Installed on the wall outlet (mains socket).
30 cm • Do not use a poor fitting AC power outlet (mains socket).

10 cm 10 cm NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
10 cm To prevent fire or shock hazard, do not place objects filled with
Leave at least this space around the set. liquids, such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a
Installed with stand bookshelf or similar unit.
30 cm • Please ensure that the AC power outlet (mains socket) is
10 cm installed near the equipment and shall be easily accessible.
10 cm 6 cm • Be sure to use the supplied AC adapter and AC power cord
(mains lead). Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power outlet
(mains socket).
• Do not coil the AC power cord (mains
Leave at least this space around the set. lead) around the AC adapter. The core
• To ensure proper ventilation and prevent the collection of dirt or wire may be cut and/or it may cause a
dust: malfunction of the TV.
 Do not lay the TV set flat, install upside down, backwards, or
sideways.
• Do not touch the AC adapter with wet hands.
 Do not place the TV set on a shelf, rug, bed or in a closet.
• If you notice an abnormality in the AC adapter, disconnect it
 Do not cover the TV set with a cloth, such as curtains, or items
from the AC power outlet (mains socket) immediately.
such as newspapers, etc.
• The set is not disconnected from the AC source as long as it is
connected to the AC power outlet (mains socket), even if the set
itself has been turned off.
• As the AC adapter will become warm when it is used for a long
time, you may feel hot when touching it by hand.

4GB
Prohibited Usage For children
Do not install/use the TV set in locations, environments or • Do not allow children to climb on the TV set.
situations such as those listed below, or the TV set may • Keep small accessories out of the reach of children, so that they
malfunction and cause a fire, electric shock, damage and/or are not mistakenly swallowed.
injuries.
Locations: If the following problems occur...
• Outdoors (in direct sunlight), at the seashore, on a ship or other Turn off the TV set and unplug the AC power cord (mains lead)
vessel, inside a vehicle, in medical institutions, unstable immediately if any of the following problems occur.
locations, near water, rain, moisture or smoke. Ask your dealer or Sony service centre to have it checked by
qualified service personnel.
Environments:
• Places that are hot, humid, or excessively dusty; where insects When:
may enter; where it might be exposed to mechanical vibration,  AC power cord (mains lead) is damaged.
near flammable objects (candles, etc.). The TV set shall not be  Poor fitting of AC power outlet (mains socket).
exposed to dripping or splashing and no objects filled with  TV set is damaged by being dropped, hit or having something GB
liquids, such as vases, shall be placed on the TV. thrown at it.
 Any liquid or solid object falls through openings in the cabinet.
Situations:
• Use when your hands are wet, with the cabinet removed, or
with attachments not recommended by the manufacturer. About LCD TV Temperature
Disconnect the TV set from AC power outlet (mains socket) and When the LCD TV is used for an extended period, the panel
antenna (aerial) during lightning storms. surrounds become warm. You may feel hot when touching there
• Install the TV so that it sticks out into an by the hand.
open space. Injury or damage from a
person or object bumping into the TV
may result. Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor light or
• Place the TV in a humid or dusty space, during long period of time, strains your eyes.
or in a room with oily smoke or steam • When using headphones, adjust the volume so as to avoid
(near cooking tables or humidifiers). excessive levels, as hearing damage may result.
Fire, electric shock, or warping may
result.
LCD Screen
• Install the TV in places subject to extreme temperature, such as • Although the LCD screen is made with high-precision
in direct sunlight, near a radiator or a heating vent. The TV may technology and 99.99 % or more of the pixels are effective,
overheat in such conditions which can cause deformation of the black dots may appear or bright points of light (red, blue, or
enclosure and/or TV malfunction. green) may appear constantly on the LCD screen. This is a
structural property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may be
damaged.
• If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate a
failure. These phenomena disappear as the temperature rises.
• If the TV is placed in the changing room of • Ghosting may occur when still pictures are displayed
a public bath or hot spring, the TV may be continuously. It may disappear after a few moments.
damaged by airborne sulfur, etc. • The screen and cabinet get warm when this TV set is in use. This
is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Follow
your local ordinances and regulations for disposal.
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid moving the TV from a cold area to a warm area. Sudden
Handling and cleaning the screen surface/
room temperature changes may cause moisture condensation. cabinet of the TV set
This may cause the TV to show poor picture and/or poor colour.
Should this occur, allow moisture to evaporate completely Be sure to unplug the AC power cord (mains lead) connected to
before powering the TV on. the TV set from AC power outlet (mains socket) before cleaning.
To avoid material degradation or screen coating degradation,
Broken pieces: observe the following precautions.
• Do not throw anything at the TV set. The screen glass may break • To remove dust from the screen surface/cabinet, wipe gently
by the impact and cause serious injury. with a soft cloth. If dust is persistent, wipe with a soft cloth
• If the surface of the TV set cracks, do not touch it until you have slightly moistened with a diluted mild detergent solution.
unplugged the AC power cord (mains lead). Otherwise this may • Never spray water or detergent directly on
cause an electric shock. the TV set. It may drip to the bottom of the
screen or exterior parts and enter the TV set,
When not in use and may cause damage to the TV set.
• If you will not be using the TV set for several days, the TV set
should be disconnected from the AC power (mains) for • Never use any type of abrasive pad, alkaline/acid cleaner,
environmental and safety reasons. scouring powder, or volatile solvent, such as alcohol, benzene,
• As the TV set is not disconnected from the AC power (mains) thinner or insecticide. Using such materials or maintaining
when the TV set is just turned off, pull the plug from the AC prolonged contact with rubber or vinyl materials may result in
power outlet (mains socket) to disconnect the TV set damage to the screen surface and cabinet material.
completely. • When adjusting the angle of the TV set, move it slowly so as to
• Some TV sets may have features that require the TV set to be prevent the TV set from moving or slipping off from its table
left in standby to work correctly. stand.

5GB
Optional Equipment ATTENTION:
Keep optional components or any equipment emitting This product is qualified for the BEE Star rating in the ‘Home’
electromagnetic radiation away from the TV set. Otherwise Mode.
picture distortion and/or noisy sound may occur. The Objectives of Star Labeling Program is designed to
promote energy efficient products and practices.
Caution about handling the remote control When the television is initially set up, it is designed to meet
• Observe the correct polarity when inserting batteries. the BEE Star Labeling requirements while maintaining
• Do not use different types of batteries together or mix old and optimum picture quality.
new batteries. • Changes to certain functionalities of this television (TV
• Dispose of batteries in an environmentally friendly way. Certain Guide, Picture/sound etc) may change the power
regions may regulate the disposal of batteries. Please consult consumption.
your local authority. • Depending upon such changed setting (eg., Retail mode),
• Handle the remote control with care. Do not drop or step on it, the power consumption may vary which possibly could
or spill liquid of any kind onto it. exceed the stated energy consumption.
• Do not place the remote control in a location near a heat source, To reset the television to Star rating qualified settings, select
a place subject to direct sunlight, or a damp room. ‘Home’ mode from the initial set-up procedure in ‘factory
settings’ under the ‘Set-up’ menu.
Disposal of the TV set * Attention statement is subject matter of BEE, and applicable if
Disposal of old electrical & function is available. For “Factory Settings”, go to “Customer
Support” menu.
electronic equipment (applicable in ** “Home mode” conditions are as per BEE guideline only.
the European Union and other
countries with separate collection
systems)

Disposal of old electrical &

electronic equipment (applicable in
Republic of India)
This symbol and its variations indicate that this
product and its components, consumables,
parts or spares thereof shall not be treated as
household waste and may not be dropped in
garbage bins. Product owners are advised to
deposit their product at the nearest collection
point for the recycling of electrical and electronic equipment. Your
co-operation shall facilitate proper disposal and help prevent
potential negative consequences/hazards to the environment
and human health, which could otherwise be caused by
inappropriate waste disposal including improper handling,
accidental breakage, damage and/ or improper recycling of
e-waste. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this
product, please contact your local civic office, your household
waste disposal service provider or the store where you made the
purchase. You may contact our company’s toll free number in
India for assistance.

Toll Free: 1800-103-7799

Visit: www.sony.co.in for product recycling

Reduction in the Use of Hazardous Substances

in Electrical & Electronic Equipment
(Applicable in Republic of India)
This product and its components, consumables, parts or
spares comply with the hazardous substances restriction of
India’s E-Waste (Management) Rules. The maximum allowable
concentrations of the restricted substances are 0.1% by weight
in homogenous materials for Lead, Mercury, Hexavalent
Chromium, Polybrominated Biphenyls (PBB) and
Polybrominated Diphenyl Ethers (PBDE), and 0.01% by weight
in homogenous materials for Cadmium, except for the
exemptions specified in Schedule II of the aforesaid Rules.

6GB
  +/–/ / (Volume / Item select)
• Increases/decreases the volume, or
Parts and Controls selects the next (+) or previous (–) channel
when the CH Up/Down notification is
TV displayed by pressing the CH/INPUT
button.
• Moves the selected input source up/down
when the input select menu is displayed
by pressing the CH/INPUT button.

 (Sensors/LED indicator)
GB
• Receives signals from the remote control.

Parts and Controls

Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep Timer]
or [On Timer] is set (page 17), or the TV is
in Photo Frame Mode (page 11).
• Lights up in green when [Power Saving] is
set to [Picture Off] (page 19).
1
• Lights up in green when the TV is turned
3 on.
2 • Does not light up when the TV is in
standby mode.
• Flashes while the remote control is being
operated.
Note
• Make sure that the TV is completely turned off before
unplugging the AC power cord (mains lead).
Hint
• The  + button has a tactile dot. Use it as a reference
when operating the TV.

 / (Power)
Turns the TV on or switches to standby
mode.
Note
• To disconnect the TV from the AC power
completely, pull the plug from the mains socket.

 CH/INPUT
Switches between the CH Up/Down screen
and the input select screen.

7GB
 Speakers:
Select [TV Speakers] or [Audio System] to
Remote Control output the TV’s sound from the TV speakers
or connected audio equipment.
The remote control shape, location, TV Control:
availability and function of remote control Use the [TV Control] menu to operate the TV
button may vary depending on your from the [Home (Menu)] or [Options] menu.
region/country/TV model.
Return to TV:
Select this option to return to TV
programme.


Exit Text mode, or switches to a TV display
when displaying external input.

 Number buttons
• Select channels. For channel numbers 10
and above, enter the next digit quickly.
• In text mode, enter the three digit page
number to select the page.

  (Text)
In text mode, displays Text broadcast.
Each time you press , the display changes
cyclically as follows:
Text  Text over the TV picture (mix mode) 
No Text (exit the Text service)

 Colour buttons
Displays operation guide (when colour
buttons are available).

 SLEEP
Press repeatedly until the TV displays the
time in minutes ([Off]/[15 min]/[30 min]/
[45 min]/[60 min]/[90 min]/[120 min]) that
you want the TV to remain on before
shutting off. To cancel the sleep timer, press
SLEEP repeatedly until [Off] appears.

 //// (Item select / Enter)

 / (Input select / Text hold)
• Select or adjust items.
• Displays and selects the input source.
• Confirm selected items.
• In text mode, holds the current page.
 RETURN
 SYNC MENU
• Returns to the previous screen of any
Press to display the BRAVIA Sync Menu and
displayed menu.
then select connected HDMI equipment
• Stops playback when playing photo/
from [Device Selection].
music/video file.
The following options can be selected from
BRAVIA Sync Menu.  HOME
Device Control: Displays or cancels the menu.
Use the [Device Control] to operate
equipment that is compatible with BRAVIA   +/– (Volume)
Sync Control. Select options from [Home Adjust the volume.
(Menu)], [Options], [Content List] and [Power
Off] to operate the equipment.

8GB
  (Mute)
Mutes the sound. Press again to restore the
sound.

 //////
• Operate the connected BRAVIA Sync-
compatible equipment.
• These keys also can be used to operate
USB media playback.

 / (TV standby)

GB
Turns the TV on or switches to standby

Parts and Controls

mode.

 AUDIO
Select the sound of multilingual source or
dual sound for the programme current
being viewed (Depend on programme
source).

 (Wide Mode)
Adjusts the screen display. Press repeatedly
to select the desired wide mode (page 10).

 / (Info / Text reveal)

• Displays information. Press once to
display information about the
programme/input you are viewing. Press
again to remove the display from the
screen.
• In text mode, reveals hidden information
(e.g. answers to a quiz).

 OPTIONS
Displays a list that contains shortcuts to
some setting menus.
The listed options vary depending on the
current input and content.

 (Jump)
Returns to the previous channel or input
viewed more than 15 seconds.

 PROG +/–/ /
• Selects the next (+) or previous (–)
channel.
• In text mode, selects the next ( ) or
previous ( ) page.
Hint
• The number 5, , PROG + and AUDIO buttons have
tactile dots. Use the tactile dots as references when
operating the TV.

9GB
 Watching TV Changing the Viewing Style

1 Press / on the TV or remote control to Changing the Wide Mode

turn on the TV.
1 Press repeatedly to select the wide
2 Press the number buttons or PROG +/– mode.
to select a TV channel. [Wide Zoom]* [Normal]
3 Press  +/– to adjust the volume.

[Full] [Zoom]*

* Parts of the top and bottom of the picture may

be cut off.

For HDMI PC Input (PC timing)

[Normal] [Full 1]

[Full 2]

Setting Scene Select

1 Press OPTIONS.

2 Press / then to select [Scene

Select].
When you select the desired scene
option, the optimum picture and sound
quality for selected scene are
automatically set. The options you can
select may vary. Unavailable options are
greyed out.

10GB
 Navigating through Home Menu Applications

The HOME button allows you to access a variety Using the TV as a Photo Frame Mode
of TV settings and features.
Photo Frame Mode displays the clock and
calendar at the same time as displaying a
1 Press HOME. photo, and listening to music or FM radio.

HOME  [Applications]  [Photo Frame

Mode]

GB

Navigating through Home Menu

2 Press / to select an option, then To launch Photo Frame Mode while
press .
playback USB media
1 Press OPTIONS while playback a photo
or music file.
Favourites
2 Press / then to select [Photo
The Favourite feature allows you to specify up 18 Frame Mode] to launch Photo Frame.
channels of your favourite programmes.

1 Press HOME. To select Display mode

You can change the Photo Frame Mode display
2 Press / then to select [Favourites]. by selecting [Display Mode] in the [Photo Frame
Settings] (page 17).

To select Clock Display mode

You can select among three clock display
modes by selecting [Clock Display] in the [Photo
Frame Settings] (page 17).
Note
• This TV does not have a battery powered backup for
the clock. If there is a power failure or if you
disconnect the power cord, the current date and time
will reset automatically.
3 Press / then to select a
programme.

11GB
Duration
To save power, the TV continually plays back in Media
Photo Frame Mode for up to 24 hours before
powering off automatically. After automatic
power off, do not use Photo Frame Mode for at
Playback Photo/Music/Video via USB
least one hour to avoid panel burn-in.
You can change the setting of the [Duration] in You can enjoy photo/music/video files stored in
the [Photo Frame Settings] (page 17). a Sony digital still camera/camcorder/
smartphone (depending on models)* through a
To avoid panel burn-in, the position of the USB cable or USB storage device on your TV.
photo, clock and calendar are switched
automatically every hour. 1 Connect a supported USB device to the
TV.
* Device needs to be in Media Transfer Mode (MTP).
Listening to FM Radio
2 Press HOME.

3 Press / then to select [Media].

HOME  [Applications]  [FM Radio]
Note 4 Press / then to select [Photo],
• Press PROG +/– to select an FM radio station. Press [Music] or [Video].
RETURN to exit FM Radio mode.
5 Press /// then to select a file
Presetting Radio Stations or folder.
When you use FM Radio function for the first
time, press HOME and select [Settings]  Playback Options
[System Settings]  [Channel Set-Up]  [FM Press the red button in thumbnail/list view to
Radio Set-up]  [Auto Tuning]. display the list of USB playback settings.

To change preset radio stations To adjust the picture and sound quality of
1 Press OPTIONS in FM Radio mode. USB media
2 Press / then to select [FM Radio Press OPTIONS during media playback then
Presets]. select [Picture] or [Sound].
Note
3 Press / then to select the radio • Press /// then to select and adjust an item.
station you want to change.

4 Press / then to change the FM

frequency then to edit FM Radio station
name.
Note
• If the station has a noisy sound, you may be able to
improve the sound quality by pressing /.
• When an FM stereo programme has static noise, press
AUDIO until [Mono] appears. There will be no stereo
effect, but the noise will be reduced.

12GB
To play a photo as a slideshow (Photo) • MKV (.mkv)
Video Codec: WMV v9, MPEG4, H.264, VC-1,
1 Press the green button in thumbnail/list VP8
view to start slideshow. Audio Codec: PCM, MPEG1 Layer1/2, MP3,
To set [Slideshow Effect] and [Slideshow MPEG2 AAC, MPEG4 AAC,
Speed], press OPTIONS  [Playback MPEG4 HE-AAC, Dolby Digital,
Options]. WMA v8, DTS, VORBIS
To stop a slideshow, press RETURN. • WebM (.webm)
Note Video Codec: VP8
• While the TV is accessing the data on a USB device, Audio Codec: VORBIS
observe the following:
 Do not turn off the TV.
• PS (.mpg, .mpeg, .vro, .vob)
 Do not disconnect the USB cable. Video Codec: MPEG1, MPEG2
 Do not remove the USB device. Audio Codec: MPEG1 Layer1/2, MP3, Dolby
The data on the USB device may be damaged.
Digital, DTS
• Sony will not be held liable for any damage to, or loss
of, data on the recording media due to a malfunction • TS (.ts, .m2ts)
of any connected devices or the TV. Video Codec: MPEG2, H.264, VC-1 GB
• The file system on the USB device supports FAT16,
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2

Navigating through Home Menu

FAT32 and NTFS.
• The file name and folder name may not display AAC, MPEG4 AAC, MPEG4 HE-
correctly in some cases. AAC, Dolby Digital, DTS
• When you connect a Sony digital still camera, set the
camera’s USB connection mode to Auto or Mass USB Music format
Storage. For more information about USB connection • LPCM (.wav)
mode, refer to the instructions supplied with your • MPEG1 audio layer3 (.mp3)
digital camera.
• Use a USB storage device that is compliant with USB • WMA V8 (.wma)
mass storage device class standards.
• If a selected file has incorrect container information,
USB Photo format
or is incomplete, it cannot be played back. • JPEG (.jpg, .jpeg)
USB Video format Note
• Playback of the above file formats is not guaranteed.
• AVI (.avi)
Video Codec: MPEG1, MPEG2, Xvid, MPEG4,
H.264, Motion JPEG
Audio Codec: PCM, MPEG1 Layer1/2, MPEG2
AAC, MPEG4 AAC, MPEG4 HE-
AAC, Dolby Digital, WMA v8,
MP3
• ASF (.wmv, .asf)
Video Codec: WMV v9, Xvid, VC-1
Audio Codec: MP3, WMA v8
• MP4 (.mp4, .mov, .3gp)
Video Codec: MPEG4, H.264, H.263, Motion
JPEG
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2
AAC, MPEG4 AAC, MPEG4 HE-
AAC

13GB
 Cinema Drive
Settings Provides improved picture movement
when playing BD (Blu-ray Disc), DVD or
VCR images taken on film. Select [Auto] to
System Settings represent original film-based content as it
is.
Note
Note
• The options you can adjust vary depending on the
situation. Unavailable options are greyed out or not • If the image contains irregular signals or too
displayed. much noise, [Cinema Drive] is automatically
turned off even if [Auto] is selected.
Picture
Advanced Settings
Picture Mode Sets [Picture] settings in more detail.
Sets a picture mode. Reset: Resets all the advanced settings
to the default settings.
Reset Adv. Contrast Enhancer: Automatically
Resets all the [Picture] settings except adjusts [Backlight] and [Picture] to
[Picture Mode] and [Intelligent Picture the most suitable settings for dark
Plus] to the default settings. images scenes.
Black Corrector: Enhances black areas
Backlight
of the picture for stronger contrast.
Adjusts the brightness of the backlight.
Gamma: Adjusts the balance between
Picture bright and dark areas of the picture.
Increases or decreases picture contrast. Clear White: Emphasises white colours.
Live Colour: Makes colours more vivid.
Brightness LED Motion Mode: Reduces blur in
Brightens or darkens the picture. movies by controlling the LED
backlight source, but the brightness
Colour decreases.
Increases or decreases colour intensity.
Intelligent Picture Plus Set-up
Hue
Intelligent Picture Plus: Enhances
Increases or decreases the green tones
picture quality according to preferred
and red tones.
settings, channel or video input.
Sharpness Signal Level Indicator: When [On] is
Sharpens or softens the picture. selected, the signal level bar will be
displayed when you select analogue
Colour Temperature channel or video input.
Adjusts the whiteness of the picture. Picture Optimisation: Allows you to
enhance the picture to your preferred
Noise Reduction settings.
Reduces the picture noise (snowy picture)
in a weak broadcast signal.

MPEG Noise Reduction

Reduces the picture noise in MPEG-
compressed video.

14GB
 Sound Advanced Settings
Sound Mode Dynamic Range: Compensates for
differences in the audio level
Select according to content you want to
between different channels.
enjoy.
Note
• The effect may not function or may vary
Reset depending on the programme regardless of
Reset [Equaliser], [Clear Voice], [Intelligent the [Dynamic Range] setting.
Volume], [Balance] and [Volume Offset]
HE-AAC Audio Level: Adjust the HE-
settings.
AAC audio sound level.
Equaliser MPEG Audio Level: Adjusts the MPEG
Adjusts sound frequency settings. audio sound level.

Clear Voice
Screen GB
Makes voices sound clearer.

Navigating through Home Menu

Wide Mode
Intelligent Volume
For details about wide mode, see page 10.
Minimizes the difference in volume level
between all programmes and adverts.
Auto Wide
Automatically changes the wide mode
Balance
according to the input signal from an
Emphasises left or right speaker balance. external equipment.

Volume Offset 4:3 Default

Adjusts the volume level of the current Sets the default [Wide Mode] for a 4:3
input relative to other inputs. input signal.

Dual Sound Auto Display Area

Sets the sound from the speaker to Select [On] to automatically adjusts the
[Mono], [Stereo], [Main] or [Sub]. display area based upon the content or
Note [Off] to choose from the [Display Area]
• If the signal is very weak, the sound becomes options.
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound Display Area
becomes monaural, but the noise is reduced. Adjusts the picture display area.
• The [Dual Sound] setting is memorized for
each programme position.
• You cannot listen to stereo broadcast sound Horizontal Shift
when [Mono] is selected. Adjusts the horizontal position of the
Hint picture.
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [Main] or [Sub].
Vertical Shift
Adjusts the vertical position of the picture.

PC Settings
Adjusts the picture size, see page 10.

15GB
 Channel Set-up FM Radio Set-up
Presets up to 30 FM radio stations that can
1 Digit Direct be received in your area.
When [1 Digit Direct] is set to [On], you can Auto Tuning: Allows you to
select a channel using one preset number automatically tune and store all the
button (0 - 9) on the remote control. available channels.
FM Radio Presets: Allows you to
Auto Tuning
manually tune and store each
Tunes in all the available channels
available channel one at a time.
Programme Sorting Note
• To enable this feature, access to FM Radio
Changes the order in which the channels mode by using Home (Menu) (page 12), then
are stored on the TV. preset your desired FM radio stations
according to the steps mentioned above.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Parental Lock
PIN Code
Manual Programme Preset
Sets a PIN code. Use 0-9 on the remote
Before selecting [Channel]/[AFT]/[Audio
control to enter a four-digit PIN code.
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
Change PIN Code
number with the channel. You cannot
Select to change your PIN code.
select a programme number that is set to
[Skip:] (page 16).
Programme Block
Programme/TV System: Presets
Locks a channel from being watched. To
programme channels manually.
view a blocked channel, select
Channel: Selects a channel number. [Unblocked].
AFT: Allows you to fine-tune the
selected channel manually. When External Input Lock
[On] is selected, the fine tuning is Locks an external input from being
performed automatically. watched. To view a blocked external input,
Audio Filter: Improves the sound of select [Unblocked].
individual channels when distortion Note
• Entering the correct PIN code for blocked
occurs in mono broadcasts in TV
channel or external input will temporarily
system [B/G], [I], [D/K] and [M]. deactivates the [Parental Lock] feature. To
Note reactivate the [Parental Lock] settings, turn off
• You cannot receive stereo or dual sound and on the TV.
when [Low]/[High] is selected. Hint
Skip: Skips unused channels. • If you lost your PIN code, see page 28.

Colour System: Select the colour

system according to the channel.
Signal Level: Displays the signal level
for programme currently being
watched.

16GB
 Clock Set: Sets the current time and
Set-up date.
Photo Frame Settings Date
Set current date.
Display Mode: Allows you to select the
display mode. See page 11. Time
Set Current Time.
Clock Display: Allows you to select the
clock display. Auto Start-up
Note
Starts the initial set-up procedure. This
• This option is available when [Display
Mode] is set to [Image and Clock] or [Full option allows you to retune the TV after
Screen Clock]. moving houses, or to search for new
Audio Application: Sets [FM Radio], channels that have been launched by
[Music] or [Off] as audio application. broadcasters.
Image Selection: Select image.
Language
Music Selection: Select music. Select the language in which the menus GB
Slideshow Setting: Select from are displayed.

Navigating through Home Menu

showing slideshow mode or single
view photo. Start-up Logo
Music Playback Setting: Select from Select [On] to display the logo when the
listening to all tracks or a single TV is turned on. Select [Off] to disable it.
music track.
LED Indicator
Duration: Select the time period after
Select [On] to light up the LED indicator.
which the TV automatically switches
Select [Off] to disable it.
to standby mode.
First day of the week: Sets [Sunday] or AV Set-up
[Monday] as the first day of the week Video Labels: Assigns name to external
on the calendar. equipment input.
Enable: Select [Auto] to display names
USB Auto Start only when the equipment is connected,
When USB device is connected to the USB or [Always] to display regardless of
port, select [On] to automatically view the connection status.
thumbnail of the last played Photo/
Label Inputs: Uses one of the preset
Music/Video.
labels to assign a name to connected
equipment. Select [Edit] to creates your
Clock/Timers own label.
Sets the timer and clock.
Colour System: Selects the colour
Sleep Timer: Sets the time in minutes
system according to the composite
that you would like the TV to remain
video signal from the input source.
on before shutting off automatically.
On Timer: Turns on the TV from
standby mode at a time you set, and
tuned to a channel or input of your
preference. Before setting this
function, make sure you set the
correct current time.

17GB
 Video/Component Input: Select [Auto] TV Position: Improves the speaker
to have the TV detect and switch settings when set as [Table-Top
between the component video jack Stand] or [Wall Mount] according to
or the video jack when your TV’s position.
component video jack or video
jack is connected. BRAVIA Sync Settings
Note Allows the TV to communicate with
• You cannot use the component video jack equipment that is compatible with the
and the video jack at the same time. BRAVIA Sync Control function, and
Speakers: Select sound output from connected to the HDMI ports of the TV.
the TV speakers or external audio Note that communication settings must
equipment. also be made on the connected
Headphone/Audio Out: Sets the sound equipment.
output to headphone, external audio BRAVIA Sync Control: Sets whether or
systems or Active Subwoofer not to link the operations of the TV
connected to the TV. Disconnect and the connected equipment that is
headphone from the TV when you compatible with BRAVIA Sync
select [Audio Out] or [Subwoofer]. Control. When set to [On], the
Headphone Speaker Link: Switches the following functions are available. If
TV’s internal speakers on/off when the specific Sony equipment that is
you connect headphone to the TV. compatible with BRAVIA Sync Control
is connected, this setting is applied
Headphone Volume: Adjusts the
to the connected equipment
volume of the headphone.
automatically.
Note
• This option is not available, when Auto Devices Off: When set to [On], the
[Headphone/Audio Out] is set to [Audio connected equipment that is
Out] or [Subwoofer].
compatible with BRAVIA Sync Control
Audio Out: turns off when your TV goes to
Variable: When using an external standby mode.
audio system, volume output from
Auto TV On: When set to [On], the TV
audio out can be controlled using the
turns on when you turn on the
TV’s remote control.
connected equipment that is
Fixed: The audio output of the TV is
compatible with BRAVIA Sync
fixed. Use your audio receiver’s
Control.
volume control to adjust the volume
(and other audio settings) through BRAVIA Sync Device List: Displays a list
your audio system. of connected equipment that is
Hint compatible with BRAVIA Sync
• This option is only available when Control. Select [Enable] to update the
[Headphone/Audio Out] is set to [Audio
Out]. [BRAVIA Sync Device List].
Digital Audio Out: Sets the audio signal
that is output by connecting using
HDMI cable. Set to [Auto], when
connecting equipment compatible
with Dolby Digital or DTS. Set to
[PCM], when connecting equipment
not compatible with Dolby Digital or
DTS.

18GB
Device Control Keys: Select button
functions of the TV’s remote control Customer Support
to operate the connected Model Name
equipment. Displays model name of your TV.
None
Deactivates the control by the TV’s Software Version
remote control. Displays current software version of your TV.
Normal
For basic operations, such as navigation External Inputs
buttons (up, down, left or right, etc).
View Video Labels: Allows you to view or
Tuning Keys
manage the TV and external inputs.
For basic operations and operation of
channel-related buttons, such as
PROG +/– or (0-9), etc. Useful when
Picture Check
you control a tuner or set-top box, etc; View Test Picture: Allows you to check the
via the remote control. picture condition on the display. GB
Menu Keys

Navigating through Home Menu

For basic operations and operation of Software Update
the HOME/OPTIONS buttons. Select to perform system update.
Useful when you select menus of a BD
player, etc; via the remote control. Factory Settings
Tuning and Menu Keys Resets all settings to factory settings. After
For basic operations and operation of completing this process, the initial set-up
channel-related buttons and HOME/ screen is displayed.
OPTIONS button. Note
Note • Be sure not to turn the TV off during this period (it
• Some equipment with [BRAVIA Sync takes about 30 seconds) or press any buttons.
Control] does not support the [Device
Control Keys] feature.
Product Information
Displays your TV’s product information.
Customer Support
Provides information of your TV’s model,
software, and others. For details, see
page 19.

Eco
Reset
Resets the current Eco settings to the
default values.

Power Saving
Reduces power consumption of the TV by
adjusting the backlight.
When you select [Picture Off], the picture
is switched off. The sound remains
unchanged.

Idle TV Standby
Turns the TV off after it has been kept idle
for the preset length of time.

19GB
 Viewing Pictures from Connected Equipment

Connection Diagram
You can connect a wide range of optional equipment to your TV.
Note
• Depending on TV model, connecting a large USB device may interfere with other connected devices beside it.
• When connecting a large USB device, connect only 1 USB jack.
KLV-32R326F
Power bank

Home Audio System

with ARC/HDMI Device

HDMI *
Device

Digital still *
camera/
Camcorder/
USB storage
media
VCR/Video game equipment/DVD player/
Camcorder
* < 12 mm

< 21 mm

Headphone/Home
Audio System/Subwoofer

DVD player with component output

20GB
KLV-40R352F / 32R302F
Home Audio System
with ARC/HDMI Device

HDMI *
Device

Digital still *
camera/
Camcorder/
USB storage
media
VCR/Video game equipment/DVD player/
Camcorder
* < 12 mm

< 21 mm

GB

Viewing Pictures from Connected Equipment

Headphone/Home
Audio System/Subwoofer

DVD player with component output

21GB
Using Audio and Video
Equipment
1 Turn on the connected equipment.
2 Press to display the input source.
3 Press / then to select the desired
input source.
The highlighted item is selected if 5 seconds
pass without any operation.
Note
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.

To use BRAVIA Sync devices

When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must
be set on both the TV and the connected
equipment. See [BRAVIA Sync Settings]
(page 18) for the settings on the TV side. Refer
to the connected equipment operating
instructions for the settings on the connected
equipment side.

22GB
 Additional Information

Installing the TV to the Wall

This TV’s instruction manual only shows the steps on preparing the installation of the TV before
installing to the wall.
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.

Sufficient expertise is required for installing this product, especially to determine the strength of the
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall
to Sony dealers or licensed contractors and pay adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused by mishandling or improper installation.

Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the TV to the wall. GB
When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide

Additional Information
supplied with the Wall-Mount Bracket.
Note
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow
in reverse order the steps to detach the Table-Top Stand.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when
removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display.

To detach the Table-Top Stand from the TV

23GB
1 Make sure that the wall has enough space for the TV and is capable of supporting a
weight of at least four times that of the TV. Refer to the following table on installing the TV
to the wall. See page 28-29 (Specifications) for the TV’s weight.

Standard mounting

80

Screen centre point

Unit: mm
Display dimensions Screen centre dimension Length for mounting
Model Name
KLV-
Standard
mounting
40R352F 924 550 84 201 127
32R326F
735 443 30 201 125
32R302F

Note
• Figures in the table may differ slightly depending on the installation.
• When your TV is installed on the wall, the upper side of the TV slightly leans forward.

2 Remove screws from the rear of the TV. Be sure to store the removed screws in a safe
place, keeping them away from children.

Soft cloth

24GB
3 Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by
referring to “1” of the Wall-Mount Bracket Installation Guide.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.

Standard mounting

Screw (+PSW 4 x 20) with Bush 

Pulley 

Screw (+PSW 4 x 50) 

Bush (M4) 

Spacer (60 mm) 

GB

Additional Information
Belt 

4 Connect necessary cables to the TV.

Note
• You cannot access to any terminal after installing the TV to the wall.

25GB
5 Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the
Wall” of Operating Instructions supplied with the Wall-Mount Bracket.
a
Model Name KLV- Hook location b
c
40R352F d
32R326F d
32R302F

Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.

26GB
  Keep the antenna cable away from other
connecting cables.
Troubleshooting
Picture or sound noise when viewing a TV
When the LED indicator is flashing red, count channel
how many times it flashes (interval time is  Adjust [AFT] (Automatic Fine Tuning) to obtain
three seconds). better picture reception. This function is for
If the LED indicator flashes red, reset the TV by analogue TV channels only.
disconnecting the AC power cord (mains lead)
Tiny black points and/or bright points appear
from the TV for two minutes, then turn on the
on the screen
TV.
If the problem persists, contact your dealer or  The picture of a display unit is composed of

Sony service centre with the number of times pixels. Tiny black points and/or bright points
(pixels) on the screen do not indicate a
the LED indicator flashes red (interval time is
malfunction.
three seconds). Press / on the TV to turn it off,
disconnect the AC power cord (mains lead), and Picture contours are distorted
inform your dealer or Sony service centre.  Change the current setting of [Cinema Drive] to

When the LED indicator is not flashing, check other settings (page 14).
the items as follows. No colour on programmes
If the problem persists, have your TV serviced by  Select [Reset] (page 14).
qualified service personnel.
No colour or irregular colour when viewing a GB
signal from the Y, PB, PR jacks of /

Additional Information
Picture  Check the connection of the Y, PB, PR jacks of
/ and check if each jacks are firmly seated
No picture (screen is dark) and no sound in their respective jacks.
 Check the antenna (aerial)/cable connection.
 Connect the TV to the AC power outlet (mains No picture from the connected equipment
socket), and press / on the TV or the remote appears on the screen
control.  Turn the connected equipment on.
 Check the cable connection.
No picture or no menu information from  Press to display the connected equipment
equipment connected to the video input jack list, then select the desired input.
appears on the screen  Correctly insert the memory card or other storage
 Press to display the connected equipment device in the digital still camera.
list, then select the desired input.  Use a digital still camera memory card or other
 Check the connection between the optional storage device that has been formatted according
equipment and the TV. to the instruction manual supplied with the digital
still camera.
Double images or ghosting
 Operations are not guaranteed for all USB
 Check the antenna (aerial)/cable connection, devices. Also, operations differ depending on the
location or direction. features of the USB device and the video being
Only snow and noise appear on the screen played.
 Check if the antenna is broken or bent. Cannot select the connected equipment on
 Check if the antenna has reached the end of its the menu or cannot switch the input
serviceable life (three to five years in normal use,  Check the cable connection.
one to two years at the seaside).

Distorted picture (dotted lines or stripes)

 Keep the TV away from electrical noise sources
Sound
such as cars, motorcycles, hair-dryers or optional No sound, but good picture
equipment.
 Press  +/– or  (Mute).
 When installing optional equipment, leave some
 Check if [Speakers] in [AV Set-up] is set to [TV
space between the optional equipment and the
Speakers] (page 18).
TV.
 Check if the headphone plug is connected to the
 Check the antenna (aerial)/cable connection.
TV.

27GB
No sound or noisy sound
 Check if the TV system setting is appropriate
(page 15).
Specifications
System
Channels Panel system
LCD (Liquid Crystal Display) Panel, LED backlight
Some channels are blank
TV system
 Contact the broadcaster for transmission details.
Analogue: B/G, I, D/K, M
Depend on your country/area selection
Colour/video system
General Analogue: PAL, SECAM, NTSC3.58, NTSC4.43
The TV turns off automatically (the TV enters Channel coverage
standby mode) Analogue: VHF/UHF/Cable, Depend on your
 Check if the [Sleep Timer] is activated (page 17). country/area selection
 Check if the [Duration] is activated by [On Timer] Sound output (Only for 19.5 V supply)
(page 17) or [Photo Frame Settings] (page 17). 5W+5W
 Check if the [Idle TV Standby] is activated
(page 19). Input/Output jacks
Some input sources cannot be selected Antenna (aerial)/cable
 Select [Video Labels] and select [Always] of the
75 ohm external terminal for VHF/UHF
input source (page 17). COMPONENT IN/ VIDEO IN
COMPONENT IN
The remote control does not function Supported formats: 1080p(50, 60 Hz), 1080i(50,
 Replace the batteries. 60 Hz), 720p(50, 60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 V negative sync
HDMI equipment does not appear on [BRAVIA
PB: 0.7 Vp-p, 75 ohms
Sync Device List]
PR: 0.7 Vp-p, 75 ohms
 Check that your equipment is compatible with Video input (phono jack)
BRAVIA Sync Control.
COMPONENT IN/ AUDIO IN
Cannot select [Off] in [BRAVIA Sync Control] Audio input (phono jacks)
 If you have connected any audio system that is HDMI IN 1 (ARC), HDMI IN 2
compatible with BRAVIA Sync Control, you cannot Video: 1080p(30, 50, 60 Hz), 1080/24p, 1080i
select [Off] in this menu. To change the audio (50, 60 Hz), 720p(30, 50, 60 Hz), 720/24p, 576p,
output to the TV speaker, select [TV Speakers] in 576i, 480p, 480i
the [Speakers] menu (page 18). PC input: (Horizontal × Vertical, Horizontal
frequency, Vertical frequency)
The [Parental Lock] password has been
For KLV-40R352F
forgotten
640 × 480, 31.5 kHz, 60 Hz
 Enter 9999 for the PIN code. 800 × 600, 37.9 kHz, 60 Hz
 Update PIN code by pressing HOME and select 1,024 × 768, 48.4 kHz, 60 Hz
[Settings] t [System Settings] t [Parental Lock] 1,280 × 768, 47.4 kHz, 60 Hz
t [Change PIN Code]. 1,280 × 768, 47.8 kHz, 60 Hz
Store Display Mode or Promoting Feature 1,360 × 768, 47.7 kHz, 60 Hz
1,280 × 1,024, 64 kHz, 60 Hz
Logo appears on the screen
*1,920 × 1,080, 67.5 kHz, 60 Hz
 On the remote control, press RETURN then press
* The 1080p timing when applied to the HDMI input
HOME and select [Settings] t [System Settings] will be treated as a video timing and not PC
t [Set-up] t [Auto Start-up]. Be sure to select timing.
[Home] in [Location].

28GB
 For KLV-32R326F / 32R302F Dimensions (Approx.) (w × h × d)
640 × 480, 31.5 kHz, 60 Hz
with Table-Top Stand
800 × 600, 37.9 kHz, 60 Hz
KLV-40R352F: 924 × 568 × 183 mm
1,024 × 768, 48.4 kHz, 60 Hz
KLV-32R326F: 735 × 461 × 169 mm
1,280 × 768, 47.4 kHz, 60 Hz
KLV-32R302F: 735 × 461 × 169 mm
1,280 × 768, 47.8 kHz, 60 Hz
1,360 × 768, 47.7 kHz, 60 Hz without Table-Top Stand
Audio: KLV-40R352F: 924 × 550 × 65 mm
Two channel linear PCM: 32, 44.1 and 48 kHz, 16, KLV-32R326F / 32R302F: 735 × 443 × 63 mm
20 and 24 bits, Dolby Digital
Mass (Approx.)
ARC (Audio Return Channel) (HDMI IN 1 only)
PCM, Dolby Digital, DTS with Table-Top Stand
KLV-40R352F: 6.3 kg
AUDIO OUT / (Stereo mini jack)
KLV-32R326F / 32R302F: 4.4 kg
Headphone, Audio output, Subwoofer
without Table-Top Stand
KLV-40R352F: 6.1 kg
USB port
KLV-32R326F / 32R302F: 4.3 kg
DC IN 5 V (KLV-32R326F only)
Note
DC IN 19.5 V (KLV-40R352F / 32R302F • Optional accessories availability depends on
only) countries/region/TV model/stock.
AC adapter input • Design and specifications are subject to change
without notice.
DC IN 12 V/19.5 V (KLV-32R326F only)
GB
AC adapter input: 19.5 V Trademark information

Additional Information
DC input: 12 V
• The terms HDMI and HDMI High-Definition
Others Multimedia Interface, and the HDMI Logo
Optional accessories
are trademarks or registered trademarks of
Wall-Mount Bracket: SU-WL450 HDMI Licensing Administrator, Inc. in the
United States and other countries.
Operating temperature
0 ºC – 40 ºC
• Manufactured under license from Dolby
Laboratories.
Power and others Dolby, Dolby Audio, and the double-D
Power requirements symbol are trademarks of Dolby
19.5 V DC with AC adapter Laboratories.
Rating: Input 100 V - 240 V AC, 50/60 Hz • “BRAVIA”, and BRAVIA Sync are
Screen size (measured diagonally) (approx.) trademarks or registered marks of Sony
KLV-40R352F: 40 inches / 101.6 cm Corporation.
KLV-32R326F / 32R302F: 32 inches / 80.0 cm • “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc”
Display resolution logo are trademarks of Blu-ray Disc
KLV-40R352F: 1,920 dots (horizontal) × 1,080 lines Association.
(vertical) • For DTS patents, see
KLV-32R326F / 32R302F: 1,366 dots (horizontal) × http://patents.dts.com. Manufactured
768 lines (vertical) under license from DTS, Inc.
Power consumption DTS, the Symbol, & DTS and the Symbol
KLV-40R352F: 51 W together are registered trademarks, and
KLV-32R326F: 45 W DTS 2.0+Digital Out is a trademark of DTS,
KLV-32R302F: 39 W
Inc. © DTS, Inc. All Rights Reserved.
Output Rating • TUXERA is a registered trademark of Tuxera
USB
Inc. in the US and other countries.
KLV-40R352F / 32R302F: 5 V 500 mA MAX
• All other trademarks are the property of
KLV-32R326F: 5 V 1.5 A MAX
their respective owners.

29GB
30GB
 Customer Support and Contact:

© 2018 Sony Corporation