0% found this document useful (0 votes)
28 views2 pages

ADDMIX 215-v2

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
28 views2 pages

ADDMIX 215-v2

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Last update on: 31-05-2024

Version: 2

PRODUCT DATA SHEET required. In such cases, contact your local SP Concare’s
representative.

ADDMIX® 215 Application procedure:


ADDMIX 215 is composed of synthetic polymers Direction for use:
specially designed to impart rheoplastic and set ADDMIX 215 is a ready-to-use liquid that is dispensed into
retarding qualities to concrete, especially for RMC’s. the concrete together with the mixing water. The plasticizing
effect and water reduction are higher if the admixture is
Specification: added to the damp concrete after 50 to 70% of the mixing
The retarding, super plasticising admixture for concrete water has been added.
shall be ADDMIX 215, a sulphonated naphthalene polymer-
based formulation having slump retaining capabilities. Effect of overdosage:
 Long extension of initial and final set
Uses:  Bleed/segregation of mix, quick loss of workability
 Ready mixed concrete  Increase in air entrainment.
 Long hauls  Increased plastic shrinkage
 Concrete containing Granulated Slag/ Pozzolans
 Pumped concrete A slight overdosing may not adversely affect the ultimate
strength of the concrete and can achieve higher strengths
 Mass concrete pours
than normal concrete, provided it is properly compacted and
 Hot weather concreting
cured.
Advantage:
 Reduced thermal peaks Compatibility:
 High workability for longer periods ADDMIX 215 is compatible with most admixtures used in the
production of quality concrete including normal, other mid-
 Extended setting with longer workability
range and high-range water- reducing admixtures, air
 Reduced water content for a given workability.
entertainers, accelerators, retarders, extended set-control
 Higher ultimate strengths
admixtures, corrosion inhibitors, and shrinkage reducers.
 Lower pumping pressure
ADDMIX 215 is also compatible with slag and Pozzolans
 Reduced permeability & Improved durability.
such as fly ash, metakaolin and silica fume.
 Resistance to segregation even at high workability
 Reduced shrinkage and creep. Corrosively and Non-Corrosive:
ADDMIX 215 admixture will neither initiate nor promote
Packaging:
corrosion of reinforcing steel embedded in concrete,
ADDMIX 215 is supplied in 5 kg, 20 kg, & 240 kg packing.
prestressed concrete or concrete placed on galvanized steel
floor and roof systems. Neither calcium chloride nor any
Standards:
calcium chloride-based Ingredients are used in the
 ASTM C-494 Type D
manufacture of ADDMIX 215 admixture.
 EN 934-2: T11.1/11.2
 IS 9103 Workability:
Typical Properties: ADDMIX 215 ensures that rheoplastic concrete remains
workable in excess of 2 hours at +25°C. Workability loss is
Appearance Light Brown free flowing
dependent on temperature, and on the type of cement, the
liquid
nature of aggregates, the method of transport and initial
Specific Gravity 1.12 ± 0.03 at 25°C
workability.
pH 7 to 9
Chloride ion content < 0.2% Storage and Shelf life All:
ADDMIX 215 must be stored where temperatures do not
Dosage: drop below +5°C. If product has frozen, thaw at +5°C or
The optimum dosage of ADDMIX 215 should be determined above and completely reconstitute using mild mechanical
with trial mixes. As a guide, a dosage range of 200 ml to 1.2 agitation. Store under cover, out of direct sunlight and protect
lit per 50 kg of cement/cementitious material is from extremes of temperature. Shelf life is 12 months when
recommended as a starting point. Because of variations in stored as above.
concrete materials, job site conditions, and/or applications,
dosages outside of the recommended range may be
SP CONCARE PVT. LTD.
CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
[email protected] www.spconcare.com Sangli-416416, Maharashtra, (INDIA)
Last update on: 31-05-2024
Version: 2
Safety precautions:
As with all chemical products, care should be taken during
use and storage to avoid contact with eyes, mouth, skin, and
foodstuffs (which can also be tainted with vapor until the
product is fully cured or dried). Treat splashes to eyes and
skin immediately. If accidentally ingested, seek immediate
medical attention. Keep away from children and animals.
Reseal containers after use. Do not reuse containers for
storage of consumable items.

Disclaimer:
Whilst any information contained herein is true, accurate
and represents our best knowledge and experience, no
warranty is given or implied with any recommendations
made by us, our representatives, or distributors, as the
conditions of use and the competence of any labor involved
in the application are beyond our control.

SP CONCARE PVT. LTD.


CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
[email protected] www.spconcare.com Sangli-416416, Maharashtra, (INDIA)

You might also like