Industrial Converter Series 1
IGC-0101DSFP
10/100/1000T to 100/1000M SFP Industrial Switch Converter w/Wide
Range DC/AC Input
Dual speed SFP cage (100/1000MFX) set by DIP Switch
Wide dual input DC range 18V~72VDC (48V model) ; 9~72VDC (12V
model) w/Galvanic isolation
Wide dual input AC range 18V~36VAC w/Galvanic isolation(AC
model)
Support auto-sensing LLF by DIP Switch / 10K bytes Jumbo Frames
Operating Temperature Range from -40°C to 75°C(-E model)
19” rack-mount kit for single or dual converter mounting
OVERVIEW
The Lantech IGC-0101DSFP is an Industrial Converter 18~36VAC (AC model) with galvanic isolation that is good for
converting from 10/100/1000BaseT to 100/1000M-FX dual various application including vehicle, railway, solar panel etc.
speed. It supports 10K bytes jumbo frame.
Hardened design with extended temperature range
Auto-sensing LLF and Power Fault LED/relay alarm setting It provides ±2000V EFT and ±6000V ESD protection, which can
by DIP switch reduce unstable situation caused by power line and Ethernet. It
Featured with LLF (Link Loss Forwarding) function, Lantech has high reliability and robustness coping with extensive
IPGC-0101DSFP is able to auto cut off connection if one end of
EMI/RFI phenomenon, environmental vibration and shocks
connection is down. When copper port disconnects, it will auto
usually found in Automation, transportation, surveillance,
turn off fiber port. When fiber port disconnects, it will auto turn
Wireless backhaul, Semi-conductor factory and assembly lines.
off copper port. Smart LLF function alert central side switch
immediate remedy action when connection is lost.
The -E model can be used in extreme environments with an
Power Fault LED and relay alarm can be off by DIP switch. operating temperature range of -40°C to 75°C.
19” Rack mount-able kit for single or dual converter
Dual power input from 9V~72VDC/18V~72VDC/18~36VAC
mounting
with galvanic isolation
The optional 19” rack-mount kit can be mounted with single or
IGC-0101DSFP supports dual wide range input from
dual converters.
9V~72VDC (12V model); 18V~72VDC (48V model) and
FEATURES & BENEFITS
System Interface/Performance Power Polarity Reverse Protect
UTP to Fiber Media Converter Galvanic isolation
RJ-45 port support Auto MDI/MDI-X Function Built-in LLF to cut off corresponding connection if one
end is disconnected
Auto Negotiation Speed, Half/Full Duplex
Power Fault LED and relay alarm can be disabled by
Jumbo Frame: up to 10Kbytes
DIP switch
Dual speed SFP cage (100M/1000M)
IP-30 enclosure with DIN Rail and wall mount** design
Provides EFT protection 2000VDC for power line
Optional 19” rackmount-kit for single or dual converter
Supports 6000 VDC Ethernet ESD protection
mounting
Power Supply
Supports Wide Operating Temperature (-40°C~ 75°C)
Wide-range Redundant Dual Power Design
for –E model
Support 9 to 72VDC ; 18 to 72VDC dual input
-48VDC single power inputs
Power polarity auto-reverse* and protection
Support 18 to 36VAC dual input (AC model) Relay alarm output system events
Datasheet Version 1.3
www.lantechcom.tw | [email protected]
Industrial Converter Series 2
DIMENSIONS (unit=mm)
SPECIFICATION
Standards IEEE802.3 10Base-T (Red)
IEEE802.3u 100Base-TX/100Base-FX Fiber: Link/Active (Green)
IEEE802.3ab 1000Base-T TX: Link/Active (Yellow),1000M (Green)
IEEE802.3x Flow Control and Back pressure Power Supply Terminal Block x 2 , dual input power
IEEE802.3z 1000BaseSX/LX standards Isolated Input Voltage Range: 9VDC to 72VDC (12V
Jumbo Frame 10Kbytes model) ; 18VDC to 72VDC (48V model)
Fiber parameters Fiber Core: Multi-mode (62.5/125um, 50/125um) Isolated Input Voltage Range: 18VAC to 36VAC (AC
Single-mode (9/125um) model)
Wavelength: 850nm(Multi-mode) Power 5 Watts max.
1310nm(Single-mode) Consumption
Fiber Distance: Based on transceiver type for Polarity protection Power polarity auto-reverse* and protection
different distance Relay Alarm Provides one relay output for power fail alarm.
Optical Cable 1.25Gbps: Alarm Relay current carry ability: 1A @ DC24V
Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 Operating Humidity 5% ~ 95% (Non-condensing)
km, 1310 nm (50/125 μm)
Operating -20°C~60°C / -4°F~140°F (Standard model)
Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm
-40°C~75°C / -40°F~167°F(-E model)
(9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 Temperature
nm (9/125 μm) Storage -40°C~85°C / -40°F~185°F
125Mbps: Temperature
Multi mode: 0 to 2 km/ 5 km, 1310 nm (62.5/125 μm)
Case Dimension Metal case. IP-30,
Single mode: 0 to 30 km, 1310 nm (62.5/125 μm)
35mm (W) x 152mm (H) x 105mm (D)
WDM 1.25Gbps:
Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 MTBF 1884611 hrs
nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to Installation DIN Rail and Wall Mount* Design
10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 EMI & EMS FCC Part 15 Class A,
μm) CE EN55022 Class A, CE EN55024, CE
WDM 125Mbps: EN61000-4-2 (ESD) Level 3, CE EN61000-4-3 (RS)
Single mode: 0 to 20 km/ 40 km/ 60 km/ 80 km, 1310 Level 3, CE EN61000-4-4 (EFT) Level 3, CE
nm (9/125 μm); 0 to 20 km/ 40 km/ 60 km/ 80 km, EN61000-4-5 ED3 (Surge) Level 3, CE EN61000-4-6
1550 nm (9/125 μm) (CS) Level 3, CE N61000-4-8, EN61000-4-11
DIP Switch 1:
DIP Switch Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
ON: Enables Power Fault Alarm
OFF: Disables Power Fault Alarm IEC60068-2-6 (Vibration)
DIP Switch 2: SFP speed Warranty 5 years
*Optional
Connectors Fiber: Mini-GBIC 3.3V 100/1000M FX
RJ-45 Socket: CAT-5e (10/100/1000Mbps) Twisted
Pair cable Auto MDI/MDI-X and Auto-Negotiation
Function Support
LED Per unit: Power1 (Green), Power2 (Green), Fault
Datasheet Version 1.3
www.lantechcom.tw | [email protected]
Industrial Converter Series 3
ORDERING INFOMATION
IGC-0101DSFP-48V.….……….......P/N: 8350-061
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 18V~72VDC input, Operating Temperature -20
°C to 60°C
IGC-0101DSFP-48V-E.….…….......P/N: 8350-062
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 18V~72VDC input, Operating Temperature -40
°C to 75°C
IGC-0101DSFP-12V.….…………....P/N: 8350-0611
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 9V~72VDC input, Operating Temperature -20°
C to 60°C
IGC-0101DSFP-12V-E.….……........P/N: 8350-0612
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 9V~72VDC input, Operating Temperature -40°
C to 75°C
IGC-0101DSFP-AC.….………….….P/N: 8350-063
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 18V~36VAC input, Operating Temperature -20
°C to 60°C
IGC-0101DSFP-AC-E.….………......P/N: 8350-064
10/100/1000T to 100/1000M FX Mini-GBIC Industrial Switch Converter, isolated 18V~36VAC input, Operating Temperature -40
°C to 75°C
MBAK-IGC001.….…….……….......Single converter 19” rack-mount kit
MBAK-IGC002.….………………….Dual converter 19” rack-mount kit
OPTIONAL ACCESSORIES
DIN Rail Power
AD1024-24F 24VDC, 1A, Wide AC Input, Convection Cooled, DIN Rail or Wall Mounted, RoHS, Operating Temp. -20°C~50°C
(ambient, derating each output at 2.5% per degree from 50°C ~ 75°C, which means the output is 9 Watts at 75°C.)
Mini GBIC (SFP)
8330-162X MINI GBIC 1000SX (LC/MM/0.5KM) Transceiver 8330-187 1.25Gbps BiDi SFP 20KM Transceiver (WDM 1550)
8330-163X MINI GBIC 1000SX2 (LC/MM/2KM) Transceiver 8330-180 1.25Gbps BiDi SFP 40KM Transceiver (WDM 1310)
8330-165X MINI GBIC 1000LX (LC/SM/10KM) Transceiver 8330-182 1.25Gbps BiDi SFP 40KM Transceiver (WDM 1550)
8340-0591 MINI GBIC 1000LHX (LC/SM/40KM) Transceiver 8330-181 1.25Gbps BiDi SFP 60KM Transceiver (WDM 1310)
8330-166 MINI GBIC 1000XD (LC/SM/50KM) Transceiver 8330-183 1.25Gbps BiDi SFP 60KM Transceiver (WDM 1550)
8330-169 MINI GBIC 1000XD (LC/SM/60KM) Transceiver 8330-184 1.25Gbps BiDi SFP 80KM Transceiver (WDM 1490)
8330-167 MINI GBIC 1000ZX (LC/SM/80KM) Transceiver 8330-185 1.25Gbps BiDi SFP 80KM Transceiver (WDM 1550)
8330-170 MINI GBIC 1000EZX (LC/SM/120KM) Transceiver 8330-071 125Mbps BiDi SFP 2KM (WDM 1310) Transceiver
8330-168 MINI GBIC 10/100/1000T (100m) Transceiver 8330-072 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver
8330-060 MINI GBIC 100Base (LC/MM/2KM) Transceiver 8330-069 125Mbps BiDi SFP 20KM (WDM 1310) Transceiver
8330-065 MINI GBIC 100Base (LC/MM/5KM) Transceiver 8330-068 125Mbps BiDi SFP 20KM (WDM 1550) Transceiver
8330-061 MINI GBIC 100Base (LC/SM/30KM) Transceiver 8330-080 125Mbps BiDi SFP 40KM (WDM 1310) Transceiver
8330-197 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310) 8330-082 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver
8330-198 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1550) 8330-081 125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-195 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1310) 8330-083 125Mbps BiDi SFP 60KM (WDM 1550) Transceiver
8330-196 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1550) 8330-084 125Mbps BiDi SFP 80KM (WDM 1310) Transceiver
8330-188 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1310) 8330-085 125Mbps BiDi SFP 80KM (WDM 1550) Transceiver
8330-189 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1550) 8330-191 Dual Speed SFP 100M/1000M-LX 10KM Transceiver
8330-186 1.25Gbps BiDi SFP 20KM Transceiver (WDM 1310)
Lantech Communications Global Inc.
www.lantechcom.tw
[email protected]
© 2016 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 1.3
www.lantechcom.tw | [email protected]
