Contact: PT.
ASHCROFINDO MANUNGGAL
Address: JAKARTA - INDONESIA
Technical Summary Phone:
Customer: FLS # / Reference: 5125017801 /
Cust / Proj Ref: Date: Dec 5, 2024
Primary Selection Summary - Centrifugal
Item number Qty Rated capacity Max temp Max suct pres Speed Rated dia Power rated Cap. BEP Dia ratio Working pres
Product Mat'l Rated head Rated viscosity NPSHa Eff'y Max dia Power max % Cap BEP Max head cut MAWP
Pump / Stages SG Vapor pres NPSH3 Nss (per eye) Min dia Power motor MCSF Head rise
0 1 11.0 USgpm 100 °C 0.0 kg/cm²g 1,480 rpm 161 mm 0.44 kW 13.0 USgpm 90.0 % 1.1 kg/cm²g
HPXM Centerline Mtd. S6 33.00 ft 1.00 cP Ample 15.7 % 179 mm 0.49 kW 84.9 % 36.67 ft 47.3 kg/cm²g
1.5HPXM12A / 1 1.000 0.00 kg/cm²a 0.5 m 2920 US 161 mm 10.0 hp 2.6 USgpm 11.1 %
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Pump size & type / Stages : 1.5HPXM12A /1
Based on curve no. : 2X12WM-8-3.9
Impeller diameter : 161 mm
Customer :- Capacity : 11.0 USgpm
Item number :- Head : 33.00 ft
Service :- Density / Specific gravity : - / 1.000
Flowserve reference : 5125017801 Pump speed : 1,480 rpm
Date : December 5, 2024 Ns / Nss (per eye) : 356 / 2,920 (US)
Test tolerance : ANSI/HI 14.6 Grade 1B
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
The customer must provide a minimum NPSHa of 0.5 m.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Hydraulic Datasheet
Customer :- Pump / Stages : 1.5HPXM12A /1
Customer reference :- Based on curve no. : 2X12WM-8-3.9
Item number :- Flowserve reference : 5125017801
Service :- Date : December 5, 2024
Operating Conditions Materials / Specification
Capacity (rated/normal) : 11.0 USgpm / - Material column code : S6
Water capacity (CQ=1.00) :- Pump specification :-
Total developed head : 33.00 ft Other Requirements
Water head (CH=1.00) :- Hydraulic selection : No specification
NPSHa/NPSHa less margin : Ample / - Construction : No specification
Maximum suction pressure : 0.0 kg/cm²g Test tolerance : ANSI/HI 14.6 Grade 1B
Liquid Driver Sizing : Max Power(MCSF to EOC) using SF
Liquid type : Other Seal configuration : Single Seal
Liquid description :-
Temperature : 100 °C
Density / Specific gravity : - / 1.000
Solid Size - Actual / Limit : - / 3.175 mm
Viscosity / Vapor pressure : 1.00 cP / 0.00 kg/cm²a
Performance
Hydraulic power : 0.07 kW Impeller diameter
Pump speed : 1,480 rpm Rated : 161 mm
Pump overall efficiency (CE=1.00) : 15.7 % Maximum : 179 mm
NPSH required (NPSH3) (CNPSH=1.00) : 0.5 m Minimum : 161 mm
Rated brake power : 0.44 kW Ns / Nss (per eye) : 356 / 2,920 (US)
Minimum continuous flow : 2.6 USgpm
Maximum brake power : 0.49 kW Maximum head at rated diameter : 36.67 ft
Driver power rating : 10.0 hp / 7.46 kW Flow at BEP : 13.0 USgpm
Casing working pressure : 1.1 kg/cm²g Flow as % of BEP : 84.9 %
(based on shut off @ cut dia/rated SG) Efficiency at normal flow :-
Maximum allowable : 47.3 kg/cm²g Impeller diameter ratio (rated/max) : 90.0 %
Hydrostatic test pressure : 71.9 kg/cm²g Head rise to shut off : 11.1 %
Estimated rated seal chamber pressure : 0.3 kg/cm²g Total head ratio (rated / max) / (max / rated) : 78.9 % / 126.7 %
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
The customer must provide a minimum NPSHa of 0.5 m.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Full Page GA Drawing
-
Customer :- Pump size & type : 1.5HPXM12A Drawing number :-
Item number :- Pump speed / Stages : 1,480 rpm / 1 Date : December 5, 2024
Service :- Flow / Head : 11.0 USgpm / 33.00 ft Certified by / Date : :-
Customer PO # :- Driver power / Frame : 10.0 hp / 7.46 kW / - Seal type :-
Flowserve reference : 5125017801 Volts / Phase / Hz : 380 / - / 50 Hz Seal flush plan :-
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
