Scribd
Upload
118 views

assignment-FINAL-key

Uploaded by

marlouimperial36
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
118 views

assignment-FINAL-key

Uploaded by

marlouimperial36
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

ASSIGNMENT #1F

1. A 25 hp, 440 V, 60 Hz, 6-pole three-phase induction motor is running with a slip of 4% at rated load. Stator losses are 1250 W. Friction and windage losses are
200 W. Determine the motor efficiency at rated load.
a. 86.34 % b. 91.43 % c. 89.29 % d. 87.66 %
2. An induction motor has a starting torque of 320 N-m when started by direct switching. If started, through an autotransformer with 50 % tapping, the starting
torque will be ___.
a. 0.05 N-m b. 80 N-m c. 160 n-m d. 640 N-m
3. A 100 KW( output), 3300 V, 50 Hz, 3-phase , star-connected induction motor has a synchronous speed of 500 rpm. The full load slip is 1.8 % and full load pf is
0.85. Stator copper loss = 2440 W. Iron loss= 3500 W. Rotational losses = 1200 W. calculate the line current.
a. 25.8 A b. 46.4 A c. 22.4 A d. 31.8 A
4. The result of the blocked rotor test on a three-phase wye-connected induction motor are as follows: line to line voltage= 45 V; input power = 2700 W; Input
current = 63 A. Determine the equivalent reactance per phase referred to the stator side.
a. 0.344 ohm b. 0.124 ohm c. 0.226 ohm d. 0.564 ohm
5. A 6-pole, 3-phase , 60 Hz induction motor takes 48 KW in power at 1140 rpm. The stator copper loss is 1.4 KW, stator core loss is 1.6 KW and rotor mechanical
losses are 1 KW. Find the motor efficiency.
a. 88.52 % b. 91.4 % c. 86.97 % d. 83.28 %
6. A 1.5 KW single-phase converter operates at full load from a 230-V ac source. Neglecting losses and assuming a power factor of unity, calculate the dc current.
a. 6.52 A b. 5.58 A c. 4.62 A d. 4.19 A
7. A 4-pole, 50 Hz, 3-phase induction motor, the blocked rotor reactance per phase is four times the rotor resistance per phase. The speed at which maximum
torque is developed is_________.
a. 1000 rpm b. 1500 rpm c. 1125 rpm d. 1375 rpm
8. When the supply voltage for an induction motor is increased by 10 %, the running torque will increases by___.
a. 19 % b. 25 % c. 10 % d. 21 %
9. If 10 V is the peak voltage across the secondary of the transformer in a half wave rectifier (without any filter circuit), then the maximum voltage on the reverse
biased diode will be
a. 20 V b. 14.14 V c. 10 V d. 7.8 V
10. An induction motor is started by a wye-delta switch. Determine the ratio of the starting torque to the full load torque if the starting current is five times the full
load current and the full load slip is 5 %.
a. 0.4167 b. 0.5833 c. 0.3667 d. 0.6667
11. A 600 KW, 6-phase, wye-connected, 18-pole synchronous converter has a simplex lap wound armature with 1000 conductors. The flux per pole is 60 mWb.
The machine runs at 600 rpm at rated load. Determine the ac current in the slip rings. Assume the operating power factor and efficiency of the machine equal to
1.0 and 0.95 repsectively.
a. 442 A b. 467 A c. 429 A d. 496 A
12. A three phase , 50Hz induction motor develops 5hp at 960 rpm. If the stator loss is 280 watts, what is the power input of the stator?
a. 4210 W b. 4500 W c. 4165 W d. 4190 W
13. A 3-phase induction motor having a synchronous speed of 1200 rpm draws 80 KW from a 3-phase feeder. The copper loss and iron losses in the stator amount
to 5 KW. If the motor runs at 1152 rpm, determine the mechanical power developed.
a. 74 KW b. 72 KW c. 73 KW d. 75 KW
14. A three-phase induction motor running with 2.5% slip takes 100 KW from the mains. If the stator copper loss amount to 1.8 KW, determine the mechanical
power developed.
a. 93.34 KW b. 94.63 KW c. 90.07 KW d. 95.74 KW
15. A three-phase induction motor develops 15 hp when running at a slip of 5%. If the rotor resistance per phase of this motor is 0.075 ohm, determine the rotor
current?
a. 51.16 A b. 56.32 A c. 52.45 A d. 53.21 A

GGOD LUCK!

You might also like