INTERNATIONAL ASSOCIATION OF DRILLING CONTRACTORS

STANDARD FORMAT EQUIPMENT LIST

JACK-UP DRILLING UNIT

TABLE OF CONTENTS
SECTION A - UNIT SPECIFICATIONS
A1 Main Dimensions/Technical Description
A2 Storage Capacities
A3 Jackup Systems
A4 Operational Capabilities
A5 Variable Loading
A6 Environmental Limits
A7 Mooring System
A8 Marine Loading Hoses
A9 Cranes, Hoists, and Materials Handling
A10 Helicopter Land Deck
A11 Auxiliary Equipment

SECTION B - GENERAL RIG SPECIFICATIONS

B1 Derrick and Substructure
B2 Drawworks and Associated Equipment
B3 Derrick Hoisting Equipment
B4 Rotating System

SECTION C - POWER SUPPLY SYSTEMS

C1 Rig Power Plant
C2 Emergency Generator

SECTION D - DRILLSTRING EQUIPMENT

D1 Tubulars
D2 Handling Tools
D3 Fishing Equipment

SECTION E - WELL CONTROL / SUBSEA EQUIPMENT

E1 Diverter BOP
E2 Low Pressure BOP
E3 High Pressure BOP
E4 Other Blowout Preventers
E5 BOP Control System
E6 Choke Manifold
E7 Flexible Choke & Kill Lines (BOP to Manifold)
E8 Flexible BOP Control Hoses
E9 BOP Testing Equipment
E10 BOP Handling

829510213.xlsxIADC Index 1 of 60
 SECTION F - MUD SYSTEM / BULK SYSTEM
F1 High Pressure Mud System
F2 Low Pressure Mud System
F3 Bulk System

SECTION G - CASING / CEMENTING EQUIPMENT

G1 Casing Equipment
G2 Cement Equipment

SECTION H - INSTRUMENTATION / COMMUNICATION

H1 Drilling Instrumentation at Driller’s Position
H2 Drilling Parameter Recorder
H3 Instrumentation at Choke Manifold
H4 Standpipe Pressure Gauge
H5 Deviation Equipment
H6 Rig Communication System
H7 Environmental Instrumentation
H8 Navigation Instrumentation
H9 External Communications Equipment

SECTION I - PRODUCTION TEST EQUIPMENT

l1 Burners
l2 Burner Booms
l3 Lines Required on Burner Booms
l4 Sprinkler System
l5 Fixed Piping for Well Testing
I6 Auxiliary Power Availability

SECTION J - WORKOVER TOOLS

SECTION K - ACCOMMODATION
K1 Offices
K2 Living Quarters

SECTION L - SAFETY EQUIPMENT

L1 General Safety Equipment
L2 Gas / Fire / Smoke Detection
L3 Fire Fighting Equipment
L4 Breathing Apparatus
L5 Emergency First Aid Equipment
L6 Helideck Rescue Equipment
L7 Emergency Warning Alarms
L8 Survival Equipment

SECTION M - POLLUTION PREVENTION EQUIPMENT

M1 Sewage Treatment
M2 Garbage Compaction
M3 Garbage Disposal / Grinder
M4 Incinerator
M5 Oily Water Separator

ADDITIONAL INFORMATION

829510213.xlsxIADC Index 2 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

Unit Specifications
Rig Type: three leged jack up Marathon Le Tourneau 84S
Converted to 116C
Unit / design / shape: Extended reach cantiliver
Unit flag: Liberia
Unit Classification: ABS Maltese Cross A1
IMO Certification yes / no Yes 8756497
Which code version:
Year of Construction: Original construction 1976, converted 1998
Construction Yard: Marathon LeTourneau Vicksburg , Mississippi
Converted by Keppel FELSm Singapore

A.1 Main Dimensions / Technical Description

Light Ship: lt 21026.07 kips
Displacement at loadline: lt 23,955 kips
Overall Length of unit (including helideck): ft 302 ft 08 in
Overall Width of unit (including anchor racks): ft 221 ft 2 in
Hull Length: ft 238 ft 1 in
Hull Width: ft 213 ft 0 in
Hull depth: ft 26 ft 0 in
Number of legs / length no x ft 3 X 410.11 ft
Leg length available below hull: ft 350 ft
Type of leg: Letourneau Square Truss
Leg spacing (center to center):
Transverse: ft 142 ft
Longitudinal: ft 129 ft
Independent leg or mat: Independent
Spud can diameter / bearing area: ft x ft2 46 ft x 1585 ft2
Spud can height ft x ft2 24 ft
Spud can jetting system yes / no Yes
Bottom jets: yes / no Yes
Top jets: yes / no Yes
Mat dimensions: N/A
Length: ft
Width: ft
Depth: ft
Cantilever or slot: Cantilever
Skid-off: yes / no No
Cantilever envelope:
Reach AFT, from / to: ft / ft 45 ft (60 ft with extensions)
Transverse, Port / Starboard ft / ft 15 ft / 15 ft
Skidding capabilty for MFP installation
Slot dimensions:
Length: ft
Width: ft
Mat slot dimensions:
Length: ft
Width: ft
Max Cantilever load:
(combined hook+rotary+setback): st 1,500 kips
Max Rotary load: st 1,300 / 590 KIPS / MT
Max Setback load: st 390 Kips X 0.85
Fuel consumption (avg. drilling): bbl / day 50 bbl/day
Accomodation for maximum no. personnel: no. 116
(see K2.1):

A.2 Storage Capacities

Fuel: bbl 2,2226 / 353.90 BBL / M
Drinking Water: bbl 7,741 / 1,230.32 BBL / M
Potable Water: bbl 1,724 / 274.09 BBL / M
Mud processing tank (see F.2): bbl 186 / 29.57 M
Active liquid mud (see F.2): bbl 2,158.00
Independent oil base mud storage: bbl N/A
Agitated: yes / no N/A
Independent base oil storage: bbl 1,292
Independent brine storage: bbl N/A can utlize the independent base oil storgae
Heavy brine accepted (e.g. bromide): yes / no NO
Bulk Bentonite / Barite (see F.3): ft3 4,025.00
Bulk Cement (see F.3): ft3 5,360.00
Sack storage: ft2 3,000 Sacks
Pipe rack:
Upper racks dimensions: ft x ft 52 x 56 / 15.84 M X 17.06 M
Maximum load capacity lb / ft2 500
Lower rack dimensions: ft x ft 60 x 65 / 18.28 M X 19.81 M
Maximum load capacity lb / ft2 500 / 0.22 MT
Other rack: ft x ft
Maximum load capacity lb / ft2 N/A
Miscellaneous storage area: ft2 538 / 0.24 MT
Operator storage area: ft2 120 / 0.05 MT
Preload capacity: kips 14,263 / 6,468 MT
Time to fill and dump preload: hrs 6

A.3 Jackup Systems

A.3.1 Jacking systems
Make / Type: Letourneau Rack and Pinion
No. of Jacks or Pinions: no. 48
Maximum Jacking Load: kips 16,250 / 7,370 MT
Jacking Speed: ft / min 1.7 / 0.51 M / Min
Rack Chocks available: yes / no No
Required for field tow: yes / no No
Required for ocean tow: yes / no No

A.3.2 Raw Water Systems

Pump location (water tower or leg): 3 X SPX EZ LIFT SEA WATER HOSE REELS
Suction distance below hull: ft Adjustable
Pump location (water tower or leg):
Suction distance below hull: ft

829510213.xlsxA Page 3 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

Pump location (water tower or leg):
Suction distance below hull: ft
Salt water service pump:
Quantity: no. N/A
Make / Type:
Capacity bbl / min
@ pressure psi
Horsepower: hp
Salt water service pump:
Quantity: no.
Make / Type:
Capacity bbl / min
@ pressure psi
Horsepower: hp
Dedicated preload pumps:
Quantity: no. 2
Make / Type: S & N / EMU
Capacity bbl / min 119
@ pressure psi 90 - 120
Horsepower: hp 94
Dedicated preload pumps:
Quantity: no.
Make / Type:
Capacity bbl / min
@ pressure psi
Horsepower: hp

A4 Operational Capabilities
Maximum design water depth capability: ft 300
Outfitted max / min water depth capability: ft 300
Normal minimum water depth capability: ft 30
Draft at load line (deepest): ft 27' 6"
Drilling depth capability (rated): ft 25,000
Transit speed towed (historical avg): knots 3.5
Leg (spud can) below hull in transit: ft 13.54
Maximum leg length permitted in tow: 410 ft
Ocean tow: ft 346
Field tow: ft 410 ft
Number of tugs for field tow: no. AS per MOM
Associated minimum bollard pull per tug: lt AS per MOM
Anti-roll system: yes / no No
Maximum preload reaction per leg: lt 11422 kips
Bearing pressure at maximum preload: lb / ft2 6,892
Thrusters: yes / no No
Quantity: no. N/A
Fixed / Azimuthing: N/A
Total horsepower per thruster: hp N/A

A.5 Variable Load Capacity (VL)

(exclusive of drilling loads)
Transit VL capacity: lt 2928.92 Kips
Drilling VL capacity: lt 2627.93 Kips
Survival VL capacity: lt 2427.93 Kips
Jacking VL capacity: lt 1840.93 Kips

A.6 Environmental Limits

Transit:
Max wave height: ft 35 / 10.67 M
Max wave period: sec 15
Max wind velocity: knots 146.67 / 47.44 Ft/ S - M/ Sec
Max current velocity: knots 2
Max heave (double amplitude): ft
Max pitch (double amplitude): degrees 4.2 ( below 275 ft water depth = 5 degrees)
Max roll (double amplitude): degrees 4.2 ( below 275 ft water depth = 5 degrees)

Working water depth: ft

Drilling:
Air gap (below bottom of main hull): ft 45- 80 / 13.71 - 24.38 M
Max wave height: ft 50 / 15.23 M
Max wave period: sec 15
Max wind velocity: knots 183.33 / 55.88 Ft / S - M / sec
Max current velocity: knots 2
Survival:
Air gap (below bottom of main hull): ft 50 / 15.23 M
Max wave height: ft 35 / 10.67 M
Max wave period: sec 15
Max wind velocity: knots 168.78 / 51.44 M/ Sec
Max current velocity: knots 2

Working water depth: ft 250 / 760.20 M

Drilling:
Air gap (below bottom of main hull): ft 45-90 / 13.71 - 24.38 M
Max wave height: ft 43/ 13.10 M
Max wave period: sec 15
Max wind velocity: knots 183.33 / 55.88 M/ Sec.
Max current velocity: knots 2
Survival:
Air gap (below bottom of main hull): ft 50 / 15.23 M
Max wave height: ft 43/13.10 M
Max wave period: sec 15
Max wind velocity: knots 183.33 Ft/sec - 55.88 M/sec
Max current velocity: knots 2

A.7 Mooring System

A.7.1 Anchor Winches yes
Quantity: no. 4
Make / model: Marathon Letourneau Series W-1500 TS
Type (electric / hydraulic / diesel): electric

829510213.xlsxA Page 4 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

Total HP per winch hp
Rated pull: lt 50,000 lbs - 22.7 MT
Control locations (local / remote / both): remote

A.7.2 Anchors yes

Quantity: no. 4
Make / type: 3 X off drill + 1 X delta ( 13,000)
Weight: lt 10,000 Lbs / 4.5 MT

A.7.3 Anchor Lines

Wire:
Quantity (installed & spare): no. 4+1
Make / type: Drawn Galvanized - wire
Construction: 6 x 36 IWRC EEIPS RHRL
Diameter: in. 38 mm
Useful length (nominal): ft 2,200 Ft / 670.52 M

A.7.4 Towing Gear

Towing bridle size: in. 2.5"
Hook-up system: Utility Winch
Rating: lt 700,000 Lbs / 317.51 MT
Spare bridle: yes / no Yes

A.7.5 Supply vessel mooring system

System description: 3 1/4" / 80 mm x 180 ft / 55 M Samson Proton -8
mooring line with weak links of endless eye 5" x 15"
circumference x 12' 42 Ton safe working Load
Rating: lt Minimum Breaking Stregth 628,000 LBS / 284 MT
Location (port / stbd / both): Port

A.8 Marine Loading Hoses

Location of loading manifolds (port/stbd/both): Both
Requirement for Acid Hangers port and stbd
A.8.1 Potable Water Hoses
Quantity: no. 2
Size: in. 3"
Make / type Dunlop / Hi-flex
Color coding: yes / no yes
Make / type connection: Ever - TITE D-300 Cam-lock
Working pressure: psi

A.8.2 Drilling Water Hoses

Quantity: no. 2
Size: in. 3"
Make / type Dunlop
Color coding: yes / no Yes
Make / type connection: Ever-TITED D-300 / Cam-lock
Working pressure: psi

A.8.3 Gas Oil Hoses (fuel)

Quantity: no. 2
Size: in. 3"
Make / type Dunlop / Plicord Black Flexwing
Color coding: yes / no yes
Make / type connection: EVER - Tite / D-300 / Cam -lock
Working pressure: psi

A.8.4 Mud Chemical Hoses

Quantity: no. 2
Size: in. 4"
Make / type Dunlop / Hi- Flex
Color coding: yes / no yes
Make / type connection: Ever - Tite D-400 / Cam-lock
Working pressure: psi

A.8.5 Cement Hoses

Quantity: no. 2
Size: in. 5"
Make / type Dunlop / Hi -Flex
Color coding: yes / no Yes
Make / type connection: EVER-TITE D-500 Cam-lock
Working pressure: psi

A.8.6 Base Oil Hoses

Quantity: no. 2
Size: in. 3"
Make / type Dunlop/Plicord Black Flexwing
Color coding: yes / no Yes
Make / type connection: EVER-TITE / D-300 Cam lock
Working pressure: psi

A.8.7 Brine Hoses

Quantity: no. N/A
Size: in.
Make / type
Color coding: yes / no
Make / type connection:
Working pressure: psi

A.8.8 Other Mud Hose

Quantity: no. 2
Size: in. 3"
Make / type Dunlop/Plicord Black Flexwing
Color coding: yes / no Yes
Make / type connection: Weco / Fig 100 / Hammer Union
Working pressure: psi

A.9 Cranes, Hoist and Material Handling

829510213.xlsxA Page 5 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

A.9.1 Cranes, Revolving

Quantity: no. 2 ( Identical )
Specification (API, etc.): ABS
Make: Letorneau
Type: PCM 120 AS
Location (fwd/aft/port/stbd): Port AFT , Port Forward
Boom length: ft 100 / 30.47 M
Hook reach below main deck (block/whip): ft/ft 300 / 250 / 91.43 M / 76.19 M ( Whipe only port Forward)

Block capacities and hoisting speeds:

Load/radius/speed (minimum radius): st/ft/(ft/sec) 90,000 / 24 /1.3 - 40.82 MT / 7.3 M / 0.39 M / Sec
Load/radius/speed (maximum radius): st/ft/(ft/sec) 6,900 / 103/1.3 - 3.13 MT / 31.39 M / 0.39 M / Sec
Whip capacity and hoist speed: st/ft/(ft/sec) 10,000 / at all radii/4/Sec/ 4.53 MT / at all radii / 1.21 M /
Sec
Hook load indicator automatically:
Corrected for boom angle: yes / no Yes
Alarm (audible, visual, both): Both
Automatic brake Yes
Safety latch on hooks: yes / no Yes
Crown saver (limit switch): yes / no Yes
Boom illumination: yes / no Yes

Quantity: no. 1
Specification (API, etc.): ABS
Make: Letourneau
Type: PCM 120 AS
Location (fwd/aft/port/stbd): Starboard
Boom length: ft 115/ 35.05 M
Hook reach below main deck (block/whip): ft/ft 285 / 86.86 M ( No whip )
Block capacities and hoisting speeds:
Load/radius/speed (minimum radius): st/ft/(ft/sec) 80,900 / 27 / 1.3 36.7 MT / 8.22 M / 0.39 M / Sec
Load/radius/speed (maximum radius): st/ft/(ft/sec) 6,100 / 118.5 / 1.3 2.77 MT / 36.11 / 0.39 M / Sec
Whip capacity and hoist speed: st/ft/(ft/sec) N/A
Hook load indicator automatically:
Corrected for boom angle: yes / no Yes
Alarm (audible, visual, both): Visual
Automatic brake Yes
Safety latch on hooks: yes / no Yes
Crown saver (limit switch): yes / no Yes
Boom illumination: yes / no Yes

Quantity: no.
Specification (API, etc.):
Make:
Type:
Location (fwd/aft/port/stbd):
Boom length: ft
Hook reach below main deck (block/whip): ft/ft
Block capacities and hoisting speeds:
Load/radius/speed (minimum radius): st/ft/(ft/sec)
Load/radius/speed (maximum radius): st/ft/(ft/sec)
Whip capacity and hoist speed: st/ft/(ft/sec)
Hook load indicator automatically:
Corrected for boom angle: yes / no
Alarm (audible, visual, both):
Automatic brake
Safety latch on hooks: yes / no
Crown saver (limit switch): yes / no
Boom illumination: yes / no

A.9.2 Forklifts
Quantity: no. 1
Make / type: Junheinrich / Electric
Rated Capacity: lt 1.6 MT / 3527.33 Lbs
Explosion Proof: yes / no Yes

A.9.3 Monorail Overhead Cranes

Quantity: no. 1
Make / type: Ingersol Rand , Air Operated HL- 1,500 KG
Rated Capacity: st 3,200 Lbs / 1.45 MT
Location(s): Heavy tool Store Room

Quantity: no.
Make / type:
Rated Capacity: st
Location(s):

A.9.4 Air Hoist / Derrick Winches

A.9.4.1 Rig Floor Winches (Non-man riding)
Quantity: no. 3
Make: Ingersoll Rand
Type: FA5A - D 11277 , Fa5A - 24 MX - GM1N2Q , FA5A -
LMX1
Rated Capacity: lt 9,918 , 10,138 , 9918 Lbs - 4.49 MT / 4.59 MT / 4.49 MT

Wire Diameter: in 19 MM
Automatic Brake: yes / no Yes
Automatic Spooling: yes / no Yes

Quantity: no.
Make:
Type:
Rated Capacity: lt
Wire Diameter: in
Automatic Brake: yes / no
Automatic Spooling: yes / no

829510213.xlsxA Page 6 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

A.9.4.2 Monkey Board Work Winch
Quantity: no. 1
Make: Ingersoll Rand
Type: EUAB
Rated Capacity: lt 2,000 / 0.9 MT
Wire Diameter: in 10 MM
Automatic Brake: yes / no Yes
Overload protection: yes / no No

A.9.4.3 Man-Riding Winches

Quantity: no. ( 2 at rig floor & 2 at BOP Area )
Make: Ingersoll Rand
Type: FA150KG1-MR-12-1-EH , FA150 KGI
Rated Capacity: lt 330 Lbs / 0.14 MT
Wire Diameter: in 10 MM
Automatic Brake: yes / no Yes
Automatic Spooling: yes / no Yes
Certified for man-riding: yes / no Yes

A.9.4.4 Utility Winch (i.e. Deck Winch)

Quantity: no. 4
Make: Ingersoll Rand
Type: (2) FA2B - 13XK330GP , (2) FA2AMXKI
Rated Capacity: lt 6,612 / 2.99 MT
Wire Diameter: in 16 MM
Automatic Brake: yes / no Yes
Automatic Spooling: yes / no No
Certified for man-riding: yes / no No
Locations: Sub Base Port / Starboard

Quantity: no. 1
Make: Ingersoll Rand
Type: FA5A-24 MX16V
Rated Capacity: lt 10,000 / 4.53 MT
Wire Diameter: in 19 MM
Automatic Brake: yes / no Yes
Automatic Spooling: yes / no No
Certified for man-riding: yes / no No
Locations: Bow Leg

Quantity: no.
Make:
Type:
Rated Capacity: lt
Wire Diameter: in
Automatic Brake: yes / no
Automatic Spooling: yes / no
Certified for man-riding: yes / no
Locations:

A.9.4.5 BOP Hoists (see E.10.1)

A.9.5 Transfer Baskets / Containers

A.9.5.1 Personnel Transfer Baskets 1

Billy Pugh / X -904 - ABS
A.9.5.2 Cargo Containers:
Quantity: no. 4
Make / Type:: Steel 6 Feet x 6 Feet X 6 Feet Closed container

Quantity: no. 2
Make / Type:: Steel 10 Ft x 8 Ft x 8 Ft Closed Container

Quantity: no. 2
Make / Type:: Oxygen and Acetylene Transport Racks

Quantity: no. 1
Make / Type:: Steel 11 Ft x 4 Ft x 4 Ft Open Cargo Basket

A.10 Helicopter Landing Deck

Location (fwd/aft/port/stbd): Forward

Dimensions: ft/ft 72 Ft 10 Inches X 72 Ft 10 Inches Diameter
Perimeter safety net: yes / no yes
Deck load capacity: lb/ft2 325 / 0.14 MT
Maximum helicopter weight: lbs 19,000 / 8.61 MT
Designed for helicopter type: Sikorsky - S-61N
Tie down points: yes / no yes
Covered by foam fire system (see L.3.6) yes / no yes

A.10.1 Helicopter Refueling System No

System make / type:
Fuel storage capacity: US gal
Jettisonable: yes / no
Fuel transport container, quantity: no.
Volume: US gal
Fuel transport containers: no.
Volume: US gal
Covered by foam fire system (see L.3.6) yes / no

A.11 Auxiliary Equipment

A.11.1 Water Distillation
Quantity: no. 1
Make / type: Alfa Laval Desalt / DPU 36-C100
Capacity (each / total): US gal / day 295 / Bbl / Day / 46.90 M3 / Day

Quantity: no.

829510213.xlsxA Page 7 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION A - UNIT SPECIFICATIONS Rig Specs

Make / type:
Capacity (each / total): US gal / day

A.11.2 Boilers no
Quantity: no.
Make / type:
Capacity (Total system): US gal / day

Quantity: no.
Make / type:
Capacity (Total system): US gal / day

A.11.3 Air Conditioning 8

Make / type: 4 x Carrier + 4 X Chrysler
Capacity (Total system): tons 60 Ton
Max Temperature rating: F 26 Deg C

A.11.4 Electric Welding Sets

Quantity: no. 3
Current capacity: amp 600
Make / model: Lincolin x 3 SAF - 400
Type (fixed / portable): Fixed

Quantity: no. 2
Current capacity: amp 600
Make / model: Miller x 2 SRH 444
Type (fixed / portable): Fixed

Quantity: no. 1
Current capacity: amp 200
Make / model: Lincoln / Invertec V 205-T
Type (fixed / portable): Portable

A.11.5 High Pressure Cleaner

Quantity: no. 2 Fixed & 2 Poratable
Make / type: Graco / Hydra Clean
Electronic / pneumatic / diesel: pneumatic
Max delivered pressure: psi 2300 PSI
With steam: yes / no no

Quantity: no.
Make / type:
Electronic / pneumatic / diesel:
Max delivered pressure: psi
With steam: yes / no

829510213.xlsxA Page 8 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION B - GENERAL RIG SPECIFICATIONS Rig Specs

B.1 Derrick and Substructure

B.1.1 Derrick / Mast

Make / type: Woolslayer
Rated for wind speed:
With full set back: knots 100
With no set back: knots In accordance API 4 F
Height: ft. 160 / 48.76 M
Dimensions of base: ft x ft 36 X 36 / 10.97 M x 10.97 M
Dimensions of crown ft x ft 14 x 14 / 4.26 M X 4.26 M
Gross nominal capacity: lbs
Static hook load: lbs 1,300,000 Lbs with 14 lines / 589.6 MT
Maximum number of lines: lbs 14
Ladders with safety cages and rests: yes / no yes
Platform for crown sheave access: yes / no yes
Counter balance system for rig tongs and yes / no yes
pipe spinning tongs: yes
Lighting system explosion proof: yes / no yes

B.1.2 Racking Platform

Make / type: Woolslayer
Total current simultaneous capacity-drill pipe:
5 1/2" DP: ft. 20,000 ft
6 5/8" DP: ft.
3 1/2" DP: ft.
Total current simultaneous capacity-drill collars
8" DC: ft. 540 ft
9" DC: ft. 270 ft
Tubing belly board: yes / no No

B.1.3 Automated Pipe Handling No

Make / type:
Description:

Make / type:
Description:

Make / type:
Description:

Make / type:
Description:

B.1.4 Casing Stabbing Board

Make / type: Tirek / XA 500P ( Air operated)
Adjustable from/to height above rotary: ft / ft 23-43 Ft / 7.01 - 13.10 M ( Adj. Height Above rotary table)

B.1.5 Substructure
Make / type: Keppel Fels
Drill Floor height (above main deck): ft. 38.5 Ft / 11.73 M
Length: ft. 36 / 10.97 M
Width: ft. 36 / 10.97 M
Setback capacity: kips 390 Kips
Simultaneous setback-hookload capacity: kips 1,500 / 680 MT
Rotary beam capacity (total): st 700 Kips / 317 MT
Clear height below rotary table beams:
(to main deck) ft. 37 / 11.27

B.1.6 Weather Proofing

Rig floor windbreaks: yes / no Yes
Derrickman windbreaks: yes / no Yes
Around process pits: yes / no

B.1.7 Derrick TV Camera System

Camera located at: Monkey Board
Make / type: Hernis / FT-200
Zoom/Pan/Tilt functions: yes / no yes
Monitor located at: Drillers Cabin / OIM / Client and BE office

B.2 Drawworks and Associated Equipment

B.2.1 Drawworks
Make / type Continental EMSCO C-2/11
Motors make / type: GE-752
Quantity: no. 2
Rated input power: hp 2,000
Drum size (diameter x length) in x in 30 x 57
Drum type (grooved / smooth): Grooved
for drill line size: in. 1 1/2"
Brake type (disk / drum): Drum
Maximum line pull 12 lines: lbs 14 Lines 891,000 Lbs / 404.14 MT
Maximum line pull 10 lines: lbs
Maximum line pull 8 lines: lbs
Makeup cathead type: Continental Emsco - GB
Breakout cathead type: Continental Emsco - GB
Crown block safety device: yes
Make / type: Crown-O-Matic
Make / type:
Independent fresh water cooling system for
drawworks and electric brake: yes / no Yes
Automatic driller: yes / no Yes
Make / type: Lynx / Navigator Electronic Performance Driller

B.2.2 Auxillary Brake

Make: Dre tech
Model: 9,650 W
Independent backup system type: Battery

B.2.3 Sandline N/A

829510213.xlsxB Page 9 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

B.1 Derrick and Substructure

Make:
Length capacity: ft.
Line size / type:
Breaking strength: st
Safe working load: lt

B.2.4 Slickline Unit N/A

Make / model:
Wire length (nominal): ft.
Wire size: in.
Breaking strength: lt
Safe working load: lt
Depth counter: yes / no
Pull indicator: lbs

B.3 Derrick Hoisting Equipment

B.3.1 Crown Block
Make / type: WCI / Skewered
Rated Capacity: st 743 / 674 MT
No. of sheaves: no. 8
Sheave diameter: in. 60
Sheave grooved for line side: in. 1 1/2"

B.3.2 Traveling Block

Make / type: Continenetal EMSCO / RA-60-750 TB
Rated Capacity: st 750 / 680 MT
No. of sheaves: no. 7
Sheave diameter: in. 60
Sheave grooved for line side: in. 1 1/2"

B.3.3 Hook
Make / type: N/A
Rated capacity: st
Complete with spring assembly / hook locking
device. yes / no

B.3.4 Swivel N/A

Make / type:
Rated capacity: st
Test / working pressure: psi / psi
Gooseneck and washpipe minimum ID: in.
Left hand pin connection type:
Access fitting for wireline entry on top
gooseneck: yes / no

B.3.5 Drilling Line

Diameter: in. 1 1/2"
Construction: Union 6 x 19 EIPS IWRC RHOL
Length (original): ft. 7,500 / 2,285 M
Drilling line reel: Yes
Drum cover: yes / no Yes
Drilling line drum power driven: yes / no No
Spare drilling line: yes / no Yes
Location (rig, shore, etc): Shore
Roller guides: yes / no No

B.3.6 Dead Line Anchor

Make / type: National / EB.8A
Weight sensor: yes / no Yes
Deadline dampener: yes / no No

B.3.7 Block Guidance System N/A

Make / type:

B.4 Rotating System

B.4.1 Rotary Table
Make / type:
Maximum opening: in. Continental EMSCO / T-3750
Rated capacity: st 650 / 589 MT
Two speed gearbox: yes / no No
Emergency chain drive: yes / no No
Driven by an independent electric motor: yes / no Yes
Electric motor make / type: GE -752
Output power: hp
Maximum continuous torque: ft/lbs 500 ft / Lbs @ 35 RPM
Drip pan / mud collection system: yes / no Yes

B.4.2 Master Bushings

Make / type: Dencon / HMB
Insert bowls (see G.1.8): Yes

B.4.3 Kelly Bushings No

Make / type:
Lock down assembly: yes / no

B.4.4 Top Drive

Make: Varco / TDS 4S
Type (electric / hydraulic): Electric
Rated capacity: st 650 / 589 MT
Test / Working pressure: psi 10,000 PSI / 5000 PSI
Output power: hp 1,200 hp
Maximum continuous torque: ft/lbs Low - 45,500 @ 115 RPM / High -29,100 @ 175 RPM
Two speed gear box: yes / no Yes
Maximum rotary speed: rpm 205
Remote operated kelly cock: yes / no Yes
Cooling system type: Air
Upper inside BOP (see also D.1.15)
Quantity: no. 1

829510213.xlsxB Page 10 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

B.1 Derrick and Substructure

Make / type:
Working pressure: psi 10,000
Max OD body: in.
Max ID body: in.
Connection type (box):
Connection type (pin): 7 5/8 Reg
6 5/8 Reg
B.4.4.1 Top Drive Makeup / Breakout System
Make / type: Varco / PH -85
Model:
Max. makeup torque: ft/lbs 85,000
Max breadout torque: ft/lbs 126,000
Raised backup system yes / no No
Make / type:
Working height (range): ft / ft

829510213.xlsxB Page 11 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION C - POWER SUPPLY SYSTEMS Rig Specs

C.1 Rig Power Plant
C.1.1 Diesel Engines
Quantity: no. 4
Make / type: Caterpillar 3516B
Maximum continuous power: hp 1855 HP
at rotation speed of: rpm 1200
Equipped with spark arrestors: yes / no Yes
Mufflers installed: yes / no Yes

Quantity: no.
Make / type:
Maximum continuous power: hp
at rotation speed of: rpm
Equipped with spark arrestors: yes / no
Mufflers installed: yes / no

Quantity: no.
Make / type:
Maximum continuous power: hp
at rotation speed of: rpm
Equipped with spark arrestors: yes / no
Mufflers installed: yes / no

C.1.2 DC - Generator N/A

Quantity: no.
Make / type:
Continuous power: hp
at rotation speed of: rpm
Output volts: volts

Quantity: no.
Make / type:
Continuous power: hp
at rotation speed of: rpm
Output volts: volts

C.1.3 AC - Generator
Quantity: no. 4
Make / type: Kato / 6P7 - 3300
Continuous power: hp 1,440 KW
at rotation speed of: rpm 1,200
Output volts: volts 600

Quantity: no.
Make / type:
Continuous power: hp
at rotation speed of: rpm
Output volts: volts

C.1.4 SCR System

Number of SCR: no. 6
Make / type: IPS/3,300 / 2,200
Maximum continuous power (total): kw 10,795.20
Output volts: volts 800 volts DC each bay

C.1.5 Transformer System

Quantity: no. 2
Make / type: MGM / 600 / 480 Volt Step Down
Continuous power (each): hp 1,868
Output volts: volts 480
Frequency: hz 60

Quantity: no. 1
Make / type: ELCO Holding Ltd / Single Winding
Continuous power (each): hp 1,200 KVA
Output volts: volts 480
Frequency: hz 60

Quantity: no. N/A

Make / type:
Continuous power (each): hp
Output volts: volts
Frequency: hz

C.1.6 Emergency Shutdown

Emergency shutdown switches for the complete power Control rooms / Rig Floor
system (AC & DC), located at the following points:

C.1.7 Compressed Air Systems

Air Compressors - Cold Start:
Quantity: no. 1
Make: Quincy
Model: D390LVD-TR2
Rated capacity: ft3 / min 50
Working pressure: psi 175
Prime mover (electric / diesel): Diesel
Continuous power: hp 23.1

Air Compressors - Medium Pressure (rig air):

Quantity: no. 3
Make: Quincy
Model: QSI 500
Rated capacity: ft3 / min 496
Working pressure: psi 125
Prime mover (electric / diesel): electric
Continuous power: hp 125

Air Compressors - Medium Pressure (rig air):

829510213.xlsxC Page 12 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

C.1 Rig Power Plant

Quantity: no.
Make:
Model:
Rated capacity: ft3 / min
Working pressure: psi
Prime mover (electric / diesel):
Continuous power: hp

Air Compressors - Low Pressure (bulk air):

Quantity: no. 1
Make: Quincy
Model: QSLP 100
Rated capacity: ft3 / min 712 CFM
Working pressure: psi 38
Prime mover (electric / diesel): Electric
Continuous power: hp 100

Air Dryers:
Quantity: no. 2
Make: Pioneer Model - R 1200 A
Rated Capacity: ft / min
3
1,200

C.1.8 Air Receivers 3

Volume (total): ft3 4.64 Cu.M
Pressure: psi 125 / 200
Location: Air compressore room / Rig Floor

Volume (total): ft3

Pressure: psi
Location:

Volume (total): ft3

Pressure: psi
Location:

C2 Emergency Generator
C.2.1 Engine
Quantity: no. 1
Make / type: Caterpillar / 3408
Maximum output: hp 536
At rotation speed: rpm 1,800
Automatic starting: yes / no Yes
Starting methods (air, hydraulic, battery): Battery / Air
Max angle of operation: degrees 8

C.2.2 AC - Generator
Quantity: no. 1
Make / type: Caterpillar
Maximum output: hp 370 KW
At rotation speed: rpm 1,800
Output: volts 440
Capable of back-feeding power to main bus: yes / no Yes

829510213.xlsxC Page 13 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

D.1 Tubulars
D.1.1 Kellys
Quantity: no. N/A
Nominal Size OD: in
Shape type (hexagonal, square or traingular):
Total / Working length: ft/ft
Connection type:

Quantity: no.
Nominal Size OD: in
Shape type (hexagonal, square or traingular):
Total / Working length: ft/ft
Connection type:

D.1.2 Kelly Saver Subs N/A

Quantity: no.
Nominal kelly size: in
Connection type:
Protector:

D.1.3 Drill Pipe

Drill pipe OD: in 5 1/2"
Grade: G-105
Total length: ft 18,000
Range: 2
Weight: lbs/ft 21.9
Internally plastic coated: yes / no Yes
Tool joint OD / ID: in/in 7/4
Tool joint pin length (original): in 12
Tapered shoulder tool joints (box / pins) deg / deg 18 / 18
Connection type: 5½ FH VAM CDS
Type of hardfacing: 300 XT
API classification:
Thread protectors: yes / no Yes

Drill pipe OD: in 4" Drill Pipe

Grade: G-105
Total length: ft 15,000 Feet
Range: 2
Weight: lbs/ft 15.7
Internally plastic coated: yes / no Yes
Tool joint OD / ID: in/in 5-1/4 / 2-13/16
Tool joint pin length (original): in 11/7/2008
Tapered shoulder tool joints (box / pins) deg / deg 18 / 18
Connection type: VX 40
Type of hardfacing: 300 XT
API classification:
Thread protectors: yes / no Yes

Drill pipe OD: in

Grade:
Total length: ft
Range:
Weight: lbs/ft
Internally plastic coated: yes / no
Tool joint OD / ID: in/in
Tool joint pin length (original): in
Tapered shoulder tool joints (box / pins) deg / deg
Connection type:
Type of hardfacing:
API classification:
Thread protectors: yes / no

D.1.4 Drill Pipe Pup Joints

Drill pipe OD: in 5 1/2" DP 2 X 10 Feet , 2 x 15 feet , 2 x 20 feet
Grade:
Total length: ft
Range:
Weight: lbs/ft
Internally plastic coated: yes / no
Tool joint OD / ID: in/in
Tool joint pin length (original): in
Tapered shoulder tool joints (box / pins) deg / deg
Connection type:
Type of hardfacing:
API classification:
Thread protectors: yes / no

Drill pipe OD: in 4" DP , 1 x 10 ft, 1 x 15 ft, 1 x 20 ft

Grade:
Total length: ft
Range:
Weight: lbs/ft
Internally plastic coated: yes / no
Tool joint OD / ID: in/in
Tool joint pin length (original): in
Tapered shoulder tool joints (box / pins) deg / deg
Connection type:
Type of hardfacing:
API classification:
Thread protectors: yes / no

Drill pipe OD: in

Grade:
Total length: ft
Range:
Weight: lbs/ft
Internally plastic coated: yes / no

829510213.xlsxD Page 14 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Tool joint OD / ID: in/in
Tool joint pin length (original): in
Tapered shoulder tool joints (box / pins) deg / deg
Connection type:
Type of hardfacing:
API classification:
Thread protectors: yes / no

D.1.5 Drill Pipe Casing Protectors N/A

Initial Stock: no.
Make / type:
OD: in
Installation tools (manual/hydraulic/none):

Initial Stock: no.

Make / type:
OD: in
Installation tools (manual/hydraulic/none):

D.1.6 Hevi-Wate Drill Pipe

Quantity: no. 60
Nominal size OD: in 5½
Weight: lbs/ft 46.7
Range: 2
Tool joint OD / ID: in 7/4
Type of hardfacing: 300 XT
Internally plastic coated: yes / no Yes
Connections type: 5 1/2 VAM CDS
Thread protectors: yes / no Yes

Quantity: no. 30
Nominal size OD: in 4"
Weight: lbs/ft 29.9
Range: 2
Tool joint OD / ID: in 5-1/4 / 2-9/16
Type of hardfacing: 300 XT
Internally plastic coated: yes / no Yes
Connections type: VAM EXPRESS VX40
Thread protectors: yes / no Yes

D.1.7 Drill Collars

Quantity: no. 6
OD body: in 9 1/2"
ID body: in 2 7/8"
Nominal length of each joint: ft 31 feet
Drill collar body (slick/spiral): Spiral
Recess for "zip" elevator yes / no No
Recess for slips: yes / no No
Stress relief pin groove: yes / no Yes
Boreback on box: yes / no Yes
Connection type: 7 5/8" Reg

Quantity: no. 8
OD body: in 8 1/4"
ID body: in 2 13/16"
Nominal length of each joint: ft 31 feet
Drill collar body (slick/spiral): Spiral
Recess for "zip" elevator yes / no N/A
Recess for slips: yes / no Yes
Stress relief pin groove: yes / no Yes
Boreback on box: yes / no N/A
Connection type: 6 5/8" Reg.

Quantity: no. 19
OD body: in 6 1/2"
ID body: in 2 1/4"
Nominal length of each joint: ft 31
Drill collar body (slick/spiral): Spiral
Recess for "zip" elevator yes / no No
Recess for slips: yes / no Yes
Stress relief pin groove: yes / no Yes
Boreback on box: yes / no N/A
Connection type: NC-50

Quantity: no. 12
OD body: in 4 3/4"
ID body: in 2 1/4"
Nominal length of each joint: ft 31
Drill collar body (slick/spiral): Spiral
Recess for "zip" elevator yes / no N/A
Recess for slips: yes / no Yes
Stress relief pin groove: yes / no Yes
Boreback on box: yes / no No
Connection type: NC-38

D.1.9 Short Drill Collars

Quantity: no. N/A
OD body: in
ID body: in
Nominal length of each joint: ft
Stress relief pin groove: yes / no
Boreback on box: yes / no
Connection type:

Quantity: no. N/A

OD body: in
ID body: in
Nominal length of each joint: ft

829510213.xlsxD Page 15 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Stress relief pin groove: yes / no
Boreback on box: yes / no
Connection type:

Quantity: no. N/A

OD body: in
ID body: in
Nominal length of each joint: ft
Stress relief pin groove: yes / no
Boreback on box: yes / no
Connection type:

Quantity: no. N/A

OD body: in
ID body: in
Nominal length of each joint: ft
Stress relief pin groove: yes / no
Boreback on box: yes / no
Connection type:

D.1.9 Non-Magnetic Drill Collars N/A

Quantity: no.
OD body: in
ID body: in
Nominal length of each joint: ft
Drill collar body (slick/spiral):
Recess for "zip" elevator yes / no
Recess for slips: yes / no
Stress relief pin groove: yes / no
Boreback on box: yes / no
Connection type:

D.1.10 CoreBarrels N/A

Quantity: no.
Make:
Model:
Size OD/ID: in/in
Length: ft
Top connection type:
Sprial stabilizing ribs: yes / no
Subs and handling tools: yes / no

D.1.11 Stabilizers
Hole Size: in N/A
Quantity: no.
Make:
OD blades: in
Type blades:
(straight / spiral;welded/integral/sleeve):
Type of blade hardfacing:
OD body or fishing neck: in
ID body: in
Connection type:
Float valve receptacle: yes / no

Hole Size: in
Quantity: no.
Make:
OD blades: in
Type blades:
(straight / spiral;welded/integral/sleeve):
Type of blade hardfacing:
OD body or fishing neck: in
ID body: in
Connection type:
Float valve receptacle: yes / no

Hole Size: in
Quantity: no.
Make:
OD blades: in
Type blades:
(straight / spiral;welded/integral/sleeve):
Type of blade hardfacing:
OD body or fishing neck: in
ID body: in
Connection type:
Float valve receptacle: yes / no

Hole Size: in
Quantity: no.
Make:
OD blades: in
Type blades:
(straight / spiral;welded/integral/sleeve):
Type of blade hardfacing:
OD body or fishing neck: in
ID body: in
Connection type:
Float valve receptacle: yes / no

D.1.12 Roller Reamers N/A

Hole size:
Quantity: no.
Make:
OD body: in
ID body: in
Fishing neck: in

829510213.xlsxD Page 16 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Cutters, supplied sets: no.
Cutters, type:
Connection type:

Hole size:
Quantity: no.
Make:
OD body: in
ID body: in
Fishing neck: in
Cutters, supplied sets: no.
Cutters, type:
Connection type:

Hole size:
Quantity: no.
Make:
OD body: in
ID body: in
Fishing neck: in
Cutters, supplied sets: no.
Cutters, type:
Connection type:

D.1.13 Shock Absorbers N/A

Quantity: no.
Make / type:
OD body: in
ID body: in
Fishing neck: in
Connection type:

Quantity: no.
Make / type:
OD body: in
ID body: in
Fishing neck: in
Connection type:

D.1.14 Drilling Jars N/A

Quantity: no.
Make:
Type (mechanical/hydraulic; up/down):
OD body: in
Min ID body: in
OD fishing neck: in
Stroke: in
Connection type:

Quantity: no.
Make:
Type (mechanical/hydraulic; up/down):
OD body: in
Min ID body: in
OD fishing neck: in
Stroke: in
Connection type:

Quantity: no.
Make:
Type (mechanical/hydraulic; up/down):
OD body: in
Min ID body: in
OD fishing neck: in
Stroke: in
Connection type:

D.1.15 Inside BOP Valve (see also B.4.4)

Quantity: no. 2
Make: Hydril
OD: in 7"
Min ID: in 3"
Connection type: 5 1/2 VAM CDS
Working pressure: psi 15,000

Quantity: no. 2
Make: Hydril
OD: in 5½"
Min ID: in 2½"
Connection type: VAM EXPRESS VX40
Working pressure: psi 15,000

D.1.16 Fast Shut-Off Coupling N/A

Make / type:
Quantity: no.
Size tooljoint to fit:

Make / type:
Quantity: no.
Size tooljoint to fit:

D.1.17 Circulation Head

Quantity: no.
Make / type:
Bottom connection type:
Top connection type:
Wireline stripper: yes / no
Working pressure: psi

829510213.xlsxD Page 17 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Quantity: no.
Make / type:
Bottom connection type:
Top connection type:
Wireline stripper: yes / no
Working pressure: psi

D.1.18 Kelly Cocks

Upper:
Quantity: no.
Make / type:
Working pressure: psi
Max OD body: in
Min ID body: in
Connection type:

Quantity: no.
Make / type:
Working pressure: psi
Max OD body: in
Min ID body: in
Connection type:

Lower
Quantity: no.
Make / type:
Working pressure: psi
Max OD body: in
Min ID body: in
Connection type:

Quantity: no.
Make / type:
Working pressure: psi
Max OD body: in
Min ID body: in
Connection type:

D.1.19 Circulation Subs N/A

Quantity: no.
Make / type:
OD body: in
Ball size: in
Dressing kits: no.
Connection type:

Quantity: no.
Make / type:
OD body: in
Ball size: in
Dressing kits: no.
Connection type:

D.1.20 Cup Type Testers N/A

Quantity: no.
Make:
Size: in
Test cup for casing weight: lbs/ft
Test cup for casing weight: lbs/ft
Test cup for casing weight: lbs/ft
Connection type:

Quantity: no. 1
Make:
Size: in
Test cup for casing weight: lbs/ft
Test cup for casing weight: lbs/ft
Test cup for casing weight: lbs/ft
Connection type:

D.1.21 Plug Type Testers N/A

Quantity: no.
Make:
Size test plugs: in
Connection type:

Quantity: no.
Make:
Size test plugs: in
Connection type:

Quantity: no.
Make:
Size test plugs: in
Connection type:

D.1.22 Drop-In Valve N/A

Quantity: no.
For nom. OD drillpipe: in
Make / type:
Max OD of dart: in

Quantity: no.
For nom. OD drillpipe: in
Make / type:
Max OD of dart: in

829510213.xlsxD Page 18 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Quantity: no.
For nom. OD drillpipe: in
Make / type:
Max OD of dart: in

D.1.23 Near Bit Subs (Box-Box)

Quantity: no. 2
OD size: in 9-1/2"
ID size in 3"
Top connection type: 7-5/8 reg
Bottom connection type: 7-5/8 reg
Bored for float valve: yes / no yes
Float size: in

Quantity: no. 4
OD size: in 8"
ID size in 3"
Top connection type: 6-5/8 reg
Bottom connection type: 6-5/8 reg
Bored for float valve: yes / no yes
Float size: in

Quantity: no. 4
OD size: in 6-1/2"
ID size in 2-3/4"
Top connection type: 4-1/2 reg
Bottom connection type: 4-1/2 if
Bored for float valve: yes / no yes
Float size: in

Quantity: no. 2
OD size: in 5-3/16"
ID size in 2"
Top connection type: VX40
Bottom connection type: 3-1/2 reg
Bored for float valve: yes / no yes
Float size: in

Quantity: no.
OD size: in
ID size in
Top connection type:
Bottom connection type:
Bored for float valve: yes / no
Float size: in

Quantity: no.
OD size: in
ID size in
Top connection type:
Bottom connection type:
Bored for float valve: yes / no
Float size: in

D.1.24 Crossover Subs

Quantity: no. 3
OD size (max/min): in 9-1/2"
ID size: in 3"
Top connection size: in 6-5/8 reg
Type (pin/box): box
Bottom connection size: in 7-5/8 reg
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 8"
ID size: in 3"
Top connection size: in 5-1/2 FH
Type (pin/box): box
Bottom connection size: in 6-5/8 reg
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 9-1/2"
ID size: in 3"
Top connection size: in 5-1/2 FH
Type (pin/box): box
Bottom connection size: in 7-5/8 reg
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 8"
ID size: in 3"
Top connection size: in 4-1/2 IF
Type (pin/box): box
Bottom connection size: in 6-5/8 reg
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 7"
ID size: in 2-15/16"
Top connection size: in 5-1/2 FH
Type (pin/box): box
Bottom connection size: in 4-1/2 IF
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 5"
ID size: in 2-3/4"

829510213.xlsxD Page 19 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Top connection size: in 5-1/2 FH
Type (pin/box): box
Bottom connection size: in VX40
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 5-1/16"
ID size: in 2-7/16"
Top connection size: in VX40
Type (pin/box): box
Bottom connection size: in 3-1/2 IF
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 8"
ID size: in 3"
Top connection size: in 6-5/8 reg
Type (pin/box): box
Bottom connection size: in 5-1/2 FH
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 7"
ID size: in 1-1/4"
Top connection size: in 5-1/2 FH
Type (pin/box): box
Bottom connection size: in 4-1/2 reg
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 5-1/16"
ID size: in 2-3/16"
Top connection size: in 3-1/2 IF
Type (pin/box): box
Bottom connection size: in VX40
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 6-5/8"
ID size: in 2-1/4"
Top connection size: in 3-1/2 IF
Type (pin/box): box
Bottom connection size: in 4-1/2 IF
Type (pin/box): pin

Quantity: no. 2
OD size (max/min): in 8"
ID size: in 3"
Top connection size: in 6-5/8 reg
Type (pin/box): box
Bottom connection size: in 5-1/2 FH
Type (pin/box): pin

D.1.25 Drilling Bumper Subs N/A

Quantity: no.
Make:
OD: in
Stroke: in
Connection type:

Quantity: no.
Make:
OD: in
Stroke: in
Connection type:

Quantity: no.
Make:
OD: in
Stroke: in
Connection type:

D.1.26 Hole Openers N/A

Quantity: no.
Make:
OD: in
Connection type:

Quantity: no.
Make:
OD: in
Connection type:

D.1.27 Underreamer N/A

Quantity: no.
Make:
OD min / OD max: in
Connection type:

Quantity: no.
Make:
OD min / OD max: in
Connection type:

D.2 Handling Tools

D.2.1 Drill Pipe Elevators
Size: in 5-1/2"
Quantity: no. 2

829510213.xlsxD Page 20 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Make: varco
Model: gg
Rated Capacity: st 350 ton

Size: in 4"
Quantity: no. 2
Make: varco
Model: mgg
Rated Capacity: st 350 ton

Size: in 4-1/2"
Quantity: no. 1
Make: varco
Model: gg
Rated Capacity: st 350

D.2.2 Drill Collar Elevators

Size: in 8-1/2"
Quantity: no. 1
Make: BJ
Model:
Rated Capacity: st 150 ton

Size: in 4-3/4"
Quantity: no. 2
Make: BJ
Model:
Rated Capacity: st 150

Size: in
Quantity: no.
Make:
Model:
Rated Capacity: st

Size: in
Quantity: no.
Make:
Model:
Rated Capacity: st

D.2.3 Tubing Elevators N/A

Size (max/min): in
Quantity: no.
Make:
Model:
Rated Capacity: st

Size (max/min): in
Quantity: no.
Make:
Model:
Rated Capacity: st

D.2.4 Drill Pipe Hand Slips

Size: in 5-1/2"
Quantity: no 3
Make / type: SDXL

Size: in 4"-5"
Quantity: no 3
Make / type: SDXL

D.2.5 Semi-Automatic DP Slips

Size range (largest / smallest): in/in 5-1/2" / 3-1/2"
Quantity: no. 1
Make / type: Access Oil Tools Backsaver

D.2.6 Drill Collar Slips

Size: in 9-1/2"
Quantity: no 1
Make / type: varco /

Size: in 8-1/2"
Quantity: no 1
Make / type: varco /

Size: in 6-1/2"
Quantity: no 1
Make / type: varco

Size: in 4-3/4"
Quantity: no 1
Make / type: varco

D.2.7 Drill Collar Safety Clamps

Quantity: no. 1
Range: in/in 2-7/8" - 5"

Quantity: no. 1
Range: in/in 3-1/2" - 7"

Quantity: no. 1
Range: in/in 7" - 10"

Quantity: no.
Range: in/in

829510213.xlsxD Page 21 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

D.2.8 Tubing Slips N/A
Size: in
Quantity: no
Make / type:

Size: in
Quantity: no
Make / type:

D.2.9 Tubing Spiders N/A

Slip size (max/min): in/in
Quantity: no.
Make:
Adapter plate:

D.2.10 Drill Collar Lifting Subs

Quantity: no. 3
For DC OD: in 9-1/2"
Connection type: 7-5/8 reg

Quantity: no. 4
For DC OD: in 8-1/2"
Connection type: 6-5/8 reg

Quantity: no. 4
For DC OD: in 6-1/2"
Connection type: 4-1/2 IF

Quantity: no. 4
For DC OD: in 4-3/4"
Connection type: 3-1/2 IF

D.2.11 DC Lifting Plugs N/A

Quantity: no.
For DC OD: in
Connection type:

Quantity: no.
For DC OD: in
Connection type:

Quantity: no.
For DC OD: in
Connection type:

Quantity: no.
For DC OD: in
Connection type:

D.2.12 Bit Breakers

Quantity: no. 1
For bit size: in 26"

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

Quantity: no.
For bit size: in

D.2.13 Elevator Links

Quantity of sets: no. 1
Make / type: Varco
Size: in 2 3/4"
Length: ft 144 "
Rated capacity: st 350 ST , 317 MT

Quantity of sets: no. 1

Make / type: Varco
Size: in 3 1/2"
Length: ft 180"
Rated capacity: st 500 St , 453.72 MT

Quantity of sets: no. 1

Make / type:
Size: in 3 1/2"
Length: ft 264
Rated capacity: st 350 St , 317 MT

Quantity of sets: no.

Make / type:
Size: in
Length: ft
Rated capacity: st

829510213.xlsxD Page 22 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Quantity of sets: no.

Make / type:
Size: in
Length: ft
Rated capacity: st

D.2.14 Kelly Spinner N/A

Make / type:

D.2.15 Drill Pipe Spinner 1

Make / type: Varco / SSW-40
Size (min/max): in/in 3-1/2" - 8-1/2"

D.2.16 Mud Saver Bucket

Make: Sub- Drill HMS - V2
Size: 3 1/2" - 5-1/2"

Make:
Size:

D.2.17 Hydraulic Makeup/Breakout Machine (e.g. EZTorque)

Make / type: Varco Model HC-26
Maximum line pull: st 4,000- 31,000 Ft / Lbs

D.2.18 Rotary Rig Tongs

Quantity (sets): no. 1
Make / type: Varco HT -100
Size range (max OD/min OD): in/in 3 1/;2" - 9-1/2"
Torque rating: ft-lbs 100,000

Quantity (sets): no. 1

Make / type: Web Wilson Type
Size range (max OD/min OD): in/in 2 7/8" - 5"
Torque rating: ft-lbs 35,000

D.2.19 Tubing Tongs (manual) N/A

Quantity (sets): no.
Make / type:
Size range (max OD/min OD): in/in
Torque rating: ft-lbs

Quantity (sets): no.

Make / type:
Size range (max OD/min OD): in/in
Torque rating: ft-lbs

D.2.20 Tubing Tongs (power) N/A

Quantity: no.
Make / type:
Size range (max OD/min OD): in/in
Max output torque: ft-lbs
Torque indicator: yes / no
Back-up arm: yes / no

D.2.21 Iron Roughneck

Make / type: Varco - ST-80
Size range (max OD/min OD): in/in 8-1/2" / 4-1/4"
Max makeup torque: ft-lbs 80,000 Ft/ Lbs
Max breakout torque: ft-lbs 126,000 Ft/Lbs

D.3 Fishing Equipment

D.3.1 Overshots
Quantity: no. 1
Make / type: Bown / Series 150 / F.S
Overshot OD: in 11 1/4
To catch size: in 9 1/2"
To catch size: in 8 1/4"
To catch size: in 7 5/8"
Overshot guide OD: in 11 1/4" - 15
Extension sub length: ft 36
Lipped guide (oversize, regular): Oversize
Grapples (spiral, basket, both): Both
Pack offs: yes / no Yes
Top subs connection type: 6-5/8 reg

Quantity: no. 2
Make / type: Bown / Series 150 / FS
Overshot OD: in 8 1/8"
To catch size: in 6 5/8"
To catch size: in 5
To catch size: in 4 3/4
Overshot guide OD: in 8-1/8"
Extension sub length: ft 36
Lipped guide (oversize, regular): regular
Grapples (spiral, basket, both): both
Pack offs: yes / no yes
Top subs connection type: 4-1/2 IF

Quantity: no. 2
Make / type: Bown / Series 150 / FS
Overshot OD: in 8-1/4"
To catch size: in 7"
To catch size: in 5"
To catch size: in 4"
Overshot guide OD: in 8-1/4"
Extension sub length: ft 36"
Lipped guide (oversize, regular): regular

829510213.xlsxD Page 23 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Grapples (spiral, basket, both): both
Pack offs: yes / no yes
Top subs connection type: 4-1/2 IF

Quantity: no.
Make / type:
Overshot OD: in
To catch size: in
To catch size: in
To catch size: in
Overshot guide OD: in
Extension sub length: ft
Lipped guide (oversize, regular):
Grapples (spiral, basket, both):
Pack offs: yes / no
Top subs connection type:

Quantity: no.
Make / type:
Overshot OD: in
To catch size: in
To catch size: in
To catch size: in
Overshot guide OD: in
Extension sub length: ft
Lipped guide (oversize, regular):
Grapples (spiral, basket, both):
Pack offs: yes / no
Top subs connection type:

D.3.2 Hydraulic Fishing Jar

Quantity: no. 1
Make / type: Bowen / Z
OD body: in 4 3/4"
Min. ID: in 2
Stroke: in 5 1/16"
Connection type: 3-1/2 IF
Repair kit: yes / no no

Quantity: no. 1
Make / type: Bowen / Z
OD body: in 6 1/4"
Min. ID: in 2-5/16"
Stroke: in 6 1/2"
Connection type: 4-1/2 IF
Repair kit: yes / no no

Quantity: no. 1
Make / type: Bown / Z
OD body: in 7 3/4"
Min. ID: in 3 1/16"
Stroke: in 6 1/2"
Connection type: 6 5/8 R Box - 6 5/8" Reg Pin
Repair kit: yes / no no

D.3.3 Jar Intensifier

Quantity: no. 1
Make / type: Bowen
OD body: in 7-3/4"
Min. ID: in 3-1/16"
Connection type: 6-5/8 reg
Repair kit: yes / no no

Quantity: no. 1
Make / type: Bowen
OD body: in 6-1/4"
Min. ID: in 2-1/4"
Connection type: 4-1/2 IF
Repair kit: yes / no NO

D.3.4 Surface Jar N/A

Quantity: no.
Make / type:
OD body: in
Stroke: in
Connection type:
Repair kit: yes / no

D.3.5 Fishing Bumper Subs N/A

Quantity: no.
Make / type:
OD body: in
Min. ID: in
Connection type:

Quantity: no.
Make / type:
OD body: in
Min. ID: in
Connection type:

D.3.6 Safety Joints N/A

Quantity: no.
Make / type:
OD body: in
Min. ID: in
Connection type:

829510213.xlsxD Page 24 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

Quantity: no.
Make / type:
OD body: in
Min. ID: in
Connection type:

D.3.7 Junk Baskets (Reverse Circulation)

Quantity: no. 1
Make / type: Bowen
For hole size: in 6-1/4"
OD body: in 5-1/4"
Connection type: 3-1/2 IF
Inside Magnet available: yes / no NO
Mill shoes type (A, B, C): B

Quantity: no. 1
Make / type: Bowen
For hole size: in 8 1/2"
OD body: in 7 7/8"
Connection type: NC 50
Inside Magnet available: yes / no no
Mill shoes type (A, B, C): A

Quantity: no. 1
Make / type: Bowen
For hole size: in 12-1/4"
OD body: in 11-1/4"
Connection type: 6-5/8 reg
Inside Magnet available: yes / no no
Mill shoes type (A, B, C):

D.3.8 Junk Subs

Quantity: no. 1
Make / type: Bowen
For hole size: in 11 1/2" - 13
OD body: in 9-11/16"
Connection type: 6 5/8" Reg - 6 5/8 pin

Quantity: no.
Make / type:
For hole size: in
OD body: in
Connection type:

Quantity: no.
Make / type:
For hole size: in
OD body: in
Connection type:

D.3.9 Flat Bottom Junk Mill

Quantity: no.
Make / type:
OD flat mill: in
Connection type:

Quantity: no.
Make / type:
OD flat mill: in
Connection type:

Quantity: no.
Make / type:
OD flat mill: in
Connection type:

D.3.10 Magnet Fishing Tools

Quantity: no. 1
Make / type: BOWEN
OD body: in 11-1/2"
Connection type: 6-5/8 reg

Quantity: no. 1
Make / type: Bowen
OD body: in 7-1/16"
Connection type: 4-1/2 reg

D.3.11 Taper Taps

Quantity: no. N/A
Make:
Tap OD (max/min): in/in
OD body: in
Length overall: ft
Connection type:

Quantity: no.
Make:
Tap OD (max/min): in/in
OD body: in
Length overall: ft
Connection type:

Quantity: no.
Make:
Tap OD (max/min): in/in
OD body: in
Length overall: ft
Connection type:

829510213.xlsxD Page 25 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION D - DRILLSTRING EQUIPMENT Rig Specs

D.3.12 Die Collars

Quantity: no. N/A
Make:
OD (max/min): in/in
OD body: in
Length overall: ft
Connection type:

Quantity: no.
Make:
OD (max/min): in/in
OD body: in
Length overall: ft
Connection type:

829510213.xlsxD Page 26 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION E - WELL CONTROL Rig Specs

E.1 Diverter
Fixed: yes / no No
Make / type:
Maximum bore: in
ID of insert packer: in
Working pressure: psi
Annular: yes / no Yes
Make / type: Hydril
Maximum bore: in 21 1/4"
Working pressure: psi 2000
Bottom Connection:
Size: in 21 1/4"
Working pressure: psi 2000
Gasket type: R73
Rams: N/A
Make / type:
Ram packer type:
Ram packer type:
Maximum bore size: in
Working pressure: psi
Bottom Connection:
Size: in
Working pressure: psi
Gasket type:

E.1.1 Diverter Flow Lines

Quantity: 2
Nominal size of flow lines: 12"
Running from Diverter to: Overboard

Valve make/type: Ball Valve

Quantity: no. 2 ea
Size: in 12"
Working pressure: psi 2M
Valve operator (air/hydraulic): Hydraulic
System pressure rating: psi 500
Flex hose in flow line: yes / no No

E.1.2 Diverter Control Panel

Primary make / type: NL Shaffer
Location: Koomy Platform
Remove make / type: NL Shaffer / Model MGBK 8 EPX - 3 DIV
Location:
Remove make / type:
Location:

E.2 Low Pressure Blowout Preventers N/A

All appropriate components H2S rated yes / no

E.2.1 Ram Type Preventers

Quantity: no.
Make / Model:
Type (single/double/triple):
Size: in
Working pressure: psi
Ram locks: yes / no
Type (manual / hydraulic):
H2S Service: yes / no
Side outlets: no.
Size: in
WP: psi
Bottom Connection:
Top connection:
Shear ram boosters: yes / no

Quantity: no.
Make / Model:
Type (single/double/triple):
Size: in
Working pressure: psi
Ram locks: yes / no
Type (manual / hydraulic):
H2S Service: yes / no
Side outlets: no.
Size: in
WP: psi
Bottom Connection:
Top connection:
Shear ram boosters: yes / no

E.2.2 Available Rams (Installed & spare)

Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in

E.2.3 BOP Ram Configuration (normal)

Upper:

829510213.xlsxE Page 27 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

Middle Upper:
Middle Lower:
Lower

E.2.4 Annular Preventer

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Bottom connection:
Top connection:

E.2.5 Kill Line Valves

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

E.2.6 Choke Line Valves

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

E.3 High Pressure Blowout Preventers

All appropriate components H2S rated yes / no Yes

E.3.1 Ram Type Preventers

Quantity: no. 1
Make / Model: Cameron / U
Type (single/double/triple): Double
Size: in 13 5/8"
Working pressure: psi 10,000 PSI
Ram locks: yes / no Yes
Type (manual / hydraulic): Manual
H2S Service: yes / no Yes
Side outlets: no. 4
Size: in 4-1/16"
WP: psi 10,000
Bottom Connection: 13 5/8" 10K BX-159
Top connection: 13 5/8" 10K BX-159
Shear ram boosters: yes / no Yes

Quantity: no. 1
Make / Model: Cameron / U
Type (single/double/triple): Single
Size: in 13 5/8"
Working pressure: psi 10K
Ram locks: yes / no Yes
Type (manual / hydraulic): Manual
H2S Service: yes / no Yes
Side outlets: no. 2
Size: in 4-1/16"
WP: psi 10,000
Bottom Connection: 13 5/8" 10K BX-159
Top connection: 13 5/8" 10K BX-159
Shear ram boosters: yes / no No

E.3.2 Available Rams (Installed & spare)

Quantity/type/size: no/type/in 2 sets VBR 5 1/2" to 3 1/2"
Quantity/type/size: no/type/in 2 sets VBR pipe ram / 4 1/2" X 7"
Quantity/type/size: no/type/in 2 / 4" pipe ram
Quantity/type/size: no/type/in 1/ 5 1/2" Pipe ram
Quantity/type/size: no/type/in 1 / Blind shear ram
Quantity/type/size: no/type/in 1 sets / Tubing 3 1/2" CIW rams ( dual String )
Quantity/type/size: no/type/in 9 5/8" Casing ram

829510213.xlsxE Page 28 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in

E.3.3 BOP Ram Configuration (normal)

Upper: 3 1/2" x 5 1/2" VBR
Middle Upper:
Middle: Blind / Shear
Middle Lower: 3 1/2" X 5 1/2" VBR
Lower 3 1/2" X 5 1/2" VBR

E.3.4 Annular Preventer

Quantity: no. 1
Make / type: Shaffer / Spherical
Size: in 13 5/8"
Working pressure: psi 5M
Bottom connection: 13 5/8" 10M BX-159
Top connection: 13 5/8" 5000 BX-160

E.3.5 Kill Line Valves

Quantity: no. 1
Make / type: Ultra Flow EEC
Size: in 3 1/16"
Working pressure: psi 10,000
Gasket type: BX-154
Hydraulic / manual / non-return: Manual

Quantity: no. 1
Make / type: Ultra Flow EEC / E-FC
Size: in 3 1/16"
Working pressure: psi 10,000
Gasket type: BX-154
Hydraulic / manual / non-return: Hydraulic

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

E.3.6 Choke Line Valves

Quantity: no. 1
Make / type: Ultra Flow EEC
Size: in 3 1/16"
Working pressure: psi 10,000
Gasket type: BX-154
Hydraulic / manual / non-return: Manual

Quantity: no. 1
Make / type: Ultra Flow EEC / E-FC
Size: in 3 1/16"
Working pressure: psi 10,000
Gasket type: BX-154
Hydraulic / manual / non-return: Hydraulic

E.4 Other Blowout Preventers

All appropriate components H2S rated yes / no N/A

E.4.1 Ram Type Preventers

Quantity: no.
Make / Model:
Type (single/double/triple):
Size: in
Working pressure: psi
Ram locks: yes / no
Type (manual / hydraulic):
H2S Service: yes / no
Side outlets: no.
Size: in
WP: psi
Bottom Connection:
Top connection:
Shear ram boosters: yes / no

Quantity: no.
Make / Model:
Type (single/double/triple):
Size: in
Working pressure: psi
Ram locks: yes / no
Type (manual / hydraulic):
H2S Service: yes / no
Side outlets: no.
Size: in
WP: psi
Bottom Connection:
Top connection:
Shear ram boosters: yes / no

E.4.2 Available Rams (Installed & spare)

829510213.xlsxE Page 29 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in
Quantity/type/size: no/type/in

E.4.3 BOP Ram Configuration (normal)

Upper:
Middle Upper:
Middle:
Middle Lower:
Lower

E.4.4 Annular Preventer

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Bottom connection:
Top connection:

E.4.5 Kill Line Valves

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

E.4.6 Choke Line Valves

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

Quantity: no.
Make / type:
Size: in
Working pressure: psi
Gasket type:
Hydraulic / manual / non-return:

E.5 BOP Control System

E.5.1 Accumulator Unit
Make / model: Shaffer / T30170-3S
Location: Below Cantilever Deck
Fluid reservoir capacity: U.S. gal 375
Oil/water mix rate: U.S. gal/min
Glycol reservoir capacity: U.S. gal
Total accumulator capacity (w/o precharge) U.S. gal
System working pressure: psi 3,000
Control manifold model: Barksdale 4 Way
Regulator type: Glimore
Total useful accumulator volume equals all
presenter opening and closing volumes: yes / no Yes ( 102 Gallons)
Plus percent additional volume: % 5% = 107

E.5.2 Accumulator Hydraulic Pumps

Electric Driven:
Quantity: no. 1
Make / model: Koomey / T33-30-3
Each driven by motor of power: hp 30
Flow rate of each pump: US gal/min 14.2
At operating pressure: psi 3,000
Operable off emergency generator: yes / no Yes

Air Driven:
Quantity: no. 3
Make / model: Koomy / FA-42
Flow rate of each pump: US gal/min 9

829510213.xlsxE Page 30 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

At operating pressure: psi 125 ( Air ) 2,650 ( system )

Operable off emergency generator: yes / no yes

E.5.3 Primary Control Panel

Control panel make / model: Shaffer / Model T30170-3S,4-way valves
Location: Accumulator Unit
Panel controls for the following functions:
All annular BOPS's: yes / no Yes
All ram BOP's: yes / no Yes
Lock for ram BOP's: yes / no No
Diverter system: yes / no Yes
Kill and choke line valves: yes / no Yes
Low accumulator pressure warning: yes / no Yes
Low reservoir level warning: yes / no Yes
Low rig air pressure warning: yes / no Yes
System pressure regulator: yes / no Yes
Pressure regulator for annular: yes / no Yes
Flowmeter: yes / no No
Quantity of pressure gauges: no. 3 / Accumulator / Manifold / Annular
Other control functions: yes / no No
Yes
E.5.4 Remote Control Panels
Make / model: Shaffer / Model MGBK8EPX-3DIV
Location: Driller Console
Location: OIM office
Location:
Ability to operate main closing unit valves
directly: yes / no Yes
System routing (direct or through panel): Direct
Remote control of - system pressure
regulator: yes / no No
Remote control of - annular pressure
regulator: yes / no Yes

E.6 Choke Manifold

All appropriate components H2S rated: yes / no Yes

E.6.1 Choke Manifold

For instrumentation, see H.3)

Nominal size: in 3 1/6"

Minimum ID: in 2 1/16"
Maximum WP: psi 10,000 PSI
Quantity of fixed chokes: no. N/A
Make / model:
Size (ID): in
Make / model:
Size: in

Quantity of adjustable chokes: no. 2

Make / model: WEIR
Size (ID): in 2"
Make / model:
Size: in

Quantity of power chokes: no. 1

Make / model: Swaco
Size (ID): in 2-9/16"
Make / model:
Size: in

Power choke remote control panel: yes / no Yes

Make / model: EEC
Location: Drill Floor
Glycol injection: yes / no No

E.7 Flexible Choke & Kill Lines

(BOP to Manifold)
Quantity: no. 2
Make / type: Copper State Rubber 16C
ID: in 3 1/6"
Working pressure: psi 10,000
H2S service: yes / no Yes

Quantity: no.
Make / type:
ID: in
Working pressure: psi
H2S service: yes / no

E.8 Flexible BOP Control Hoses

Quantity: no. 14
Make / type: Copper State Rubber BOP Control Hose
ID: in (12) -1" / (2) - 1 1/2"
Working pressure: psi 3000
Fire resistant: yes / no Yes

Quantity: no.
Make / type:
ID: in
Working pressure: psi

829510213.xlsxE Page 31 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

Fire resistant: yes / no

E.9 BOP Testing Equipment

E.9.1 Hydraulic BOP Test Pump N/A
Make / model:
Type:
Pressure rating: psi
Chart recorder: yes / no

E.9.2 BOP Test Stump

Size: in 13 5/8"
Size: in
Size: in

E.10 BOP Handling

E.10.1 BOP Hoist System
Make / type: J.D. Neuhaus / BH 100 / 36 / E
Quantity of hoists: no. 2
Number of lift points on BOP: no. 2
System safe working load (max BOP wt) st 82,671 / 37.5 MT

E.10.2 Work Platforms

BOP work platform (adjustable/fixed/none): None
Conductor pipe platform: yes / no Yes

E.10.3 Conductor Pipe Tensioning System

Make / type: ICON / T200B
Tension Capacity: st 224.46 / 200 MT
Number of lift points: no. 4
Stroke: in 12"

829510213.xlsxE Page 32 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

F.1 High Pressure Mud system
System working pressure: psi 5000 PSI
System test pressure: psi 7500 PSI

F.1.1 Mud Pumps

Quantity: no. 3
Make: Continental EMSCO
Model: FB-1600
Type (triplex/duplex): Triplex
Mud pump drive motors/pump: no. 2
Motor type: GE-752
Continuous power rating per motor: hp 800
Fluid end type: South West
Maximum working pressure: psi 5,000
Test pressure: psi 4,600
Pump stroke counter type: RigSense
Supercharging pump type: Halco 2500 Superme
Driven by motor of power: hp 100 Hp @ 1,185 RPM
Discharge/suction line ID: in/in 6 Discharge / 8 Suction / 14 Impleller
Mud pump pulsation dampener type: Performance Pulsation Control DR-130-5000CS
Reset relief valve: Retsco
Working flowrate per pump at 90% max spm:
Liner Size: in 6
Pump speed (90% of max): spm 108
Pump pressure: psi 4,665
Working flowrate: US gal/min 461 US gal/min at 108 spm

Mud Pumps
Quantity: no.
Make:
Model:
Type (triplex/duplex):
Mud pump drive motors/pump: no.
Motor type:
Continuous power rating per motor: hp
Fluid end type:
Maximum working pressure: psi
Test pressure: psi
Pump stroke counter type:
Supercharging pump type:
Driven by motor of power: hp
Discharge/suction line ID: in/in
Mud pump pulsation dampener type:
Reset relief valve:
Working flowrate per pump at 90% max spm:
Liner Size: in
Pump speed (90% of max): spm
Pump pressure: psi
Working flowrate: US gal/min

F.1.2 Transfer Pumps / Mixing Pumps

Mixing pumps
Quantity: no. 2
Make / model: Halco 2500 Superme
Output capacity: US gpm 2,400
Drive motor type: Marathon
Power output: hp 100 HP

Transfer pumps
Quantity: no. 2
Make / model: Halco SuperShear T655015002
Output capacity: US gpm 1800
Drive motor type: Marathon Electric
Power output: hp 75 HP @ 1775 RPM

F.1.3 Booster Pump

Quantity: no. 3
Make / model: Halco 2500 Superme
Output capacity: US gpm Centrifugal / 8 X 6
Drive motor type: Marathon Electric
Power output: hp 100

F.1.4 Standpipe Manifold

Quantity of standpipes: no. 2
Standpipe ID: 4 1/16
H-Type standpipe manifold: yes / no Yes
Kill line outlet: yes / no Yes
Fill-up line outlet: yes / no No
Bleed-off line outlet: yes / no Yes

F.1.5 Rotary Hoses

Quantity: no. 2
Make / type:

829510213.xlsxF Page 33 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

ID x length: in x ft 3.5 x 85 ft
Working pressure: psi 5,000 PSI
Snubbing lines: yes / no Yes

Quantity: no.
Make / type:
ID x length: in x ft
Working pressure: psi
Snubbing lines: yes / no

F.1.6 Cementing Hose

Quantity: no. 1
Type (armor sheath/flexible steel pipe): Armer Sheath
Length: ft 50
ID: in 2
Working Pressure: psi 5,000 PSI

Quantity: no.
Type (armor sheath/flexible steel pipe):
Length: ft
ID: in
Working Pressure: psi

F.1.7 High Pressure Flexible Steel Pipe N/A

Make/type:
Integral connections/fittings (non threaded): yes / no
ID: in
Working pressure: psi
Section length: ft
Quantity: no.
Section length: ft
Quantity: no.
Sweep swivels, make/type:
Nom size ID: in
Suitable for H2S service: yes / no

F.2 Low Pressure Mud System

F.2.1 Mud Processing Tank
Sand trap tank, usable volume: bbl 45 BBl
Degasser tank, usable volume: bbl 43
Agitated: yes / no No
Desander tank, usable volume: bbl 42
Agitated: yes / no No
Desilter tank, usable volume: bbl 44
Agitated: yes / no no
Mud cleaner tank, usable volume: bbl 40
Agitated: yes / no no
Centrifuge tank, usable volume: bbl N/A
Agitated: yes / no no
Other tank, usable volume: bbl no
Agitated: yes / no no
Total usable capacity: bbl 214

F.2.2 Mud Tanks

Total capacity (usable): bbl 5 tanks ( 2100 Bbls )
Usable capacity No. 1: bbl 245
Type (active / reserve): Reserve
Height: ft 10.6
Mixer: yes / no Yes
Mud guns: yes / no Yes
Usable capacity No. 2: bbl 310
Type (active / reserve): Active
Height: ft 10.6
Mixer: yes / no Yes
Mud guns: yes / no Yes
Usable capacity No. 3: bbl 523
Type (active / reserve): Active
Height: ft 10.6
Mixer: yes / no Yes
Mud guns: yes / no Yes
Usable capacity No. 4: bbl 485
Type (active / reserve): Active or reserve
Height: ft 10.6
Mixer: yes / no Yes
Mud guns: yes / no Yes
Usable capacity No. 5: bbl 555
Type (active / reserve): Reserve
Height: ft 10.6
Mixer: yes / no Yes
Mud guns: yes / no Yes
Usable capacity No. 6: bbl N/A
Type (active / reserve):
Height: ft

829510213.xlsxF Page 34 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

Mixer: yes / no
Mud guns: yes / no
Usable capacity No. 7: bbl N/A
Type (active / reserve):
Height: ft
Mixer: yes / no
Mud guns: yes / no
Usable capacity No. 8: bbl N/A
Type (active / reserve):
Height: ft
Mixer: yes / no
Mud guns: yes / no

F.2.3 Pill / Slug Tank

Capacity (usable): bbl 65
Mud agitator: yes / no Yes
Mud guns: yes / no Yes

Capacity (usable): bbl

Mud agitator: yes / no
Mud guns: yes / no

F.2.4 Trip / Stripping Tanks

Capacity (usable): bbl 2 tanks 50 BBL each
Capacity / foot: bbl/ft 5 bbl/ ft
Level indicator: yes / no Yes
Electric pump make:
Model / type: Marathon Motor / Halco pump 2,500 Supreme
Centerifugal 4X3X13
Rated capacity: hp 750 GPM
Facility for casing fill-up: yes / no Yes
Alarm and strip chart recorder: yes / no Yes

Capacity (usable): bbl

Capacity / foot: bbl/ft
Level indicator: yes / no
Electric pump make:
Model / type:
Rated capacity: hp
Facility for casing fill-up: yes / no
Alarm and strip chart recorder: yes / no

F.2.5 Chemical Mixing Tank N/A

Capacity (usable): bbl
Chemical mixer type:

F.2.6 Shale Shakers

Primary:
Quantity: no. 3
Make / model: Linear Motion Type
Type: Brandt / VSM300 Zone 1 application
Nominal flow rate (total): bbl/min 2500 GPM
Quantity: no.
Make / model:
Type:
Nominal flow rate (total): bbl/min

Cascading:
Quantity: no.
Make / model:
Type:
Nominal flow rate (total): bbl/min
Quantity: no.
Make / model:
Type:
Nominal flow rate (total): bbl/min

F.2.7 Desander
Quantity: no. N/A
Make / model:
Type:
Nominal flow rate (total): bbl/min
Number of cones: no.
Size: in
Feed pump make / model:
Type/size:
Capacity: gpm
Drive motor hp: hp
Is pump dedicated to desander: yes / no

F.2.8 Desilter
Quantity: no. N/A
Make / model:

829510213.xlsxF Page 35 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

Type:
Nominal flow rate (total): bbl/min
Number of cones: no.
Size: in
Feed pump make / model:
Type/size:
Capacity: gpm
Drive motor hp: hp
Is pump dedicated to desilter: yes / no

F.2.9 Mud Cleaner N/A

Quantity: no.
Make / model:
Type:
Nominal flow rate (total): bbl/min
Number of cones: no.
Size: in
Feed pump make / model:
Type/size:
Capacity: gpm
Drive motor hp: hp
Is pump dedicated to mud cleaner: yes / no

Quantity: no.
Make / model:
Type:
Nominal flow rate (total): bbl/min
Number of cones: no.
Size: in
Feed pump make / model:
Type/size:
Capacity: gpm
Drive motor hp: hp
Is pump dedicated to mud cleaner: yes / no

F.2.10 Mud/Gas Separator (Poor Boy)

Make / type: National Board
Dimensions (height x OD): ft x in 20 / 48"
Gas discharge line OD: in 10
Gas discharge location, primary: 160 feet above RKB
Can discharge be tied into burner system: yes/no no
Vacuum breaker: yes/no yes
Mud seal height: ft 18
Pressure gauge: yes/no no
Calculated gas throughput: mmscf 10

Make / type:
Dimensions (height x OD): ft x in
Gas discharge line OD: in
Gas discharge location, primary:
Can discharge be tied into burner system: yes/no
Vacuum breaker: yes/no
Mud seal height: ft
Pressure gauge: yes/no
Calculated gas throughput: mmscf

F.2.11 Degasser 1
Make / type: SWACO Vertical D-Gasser / 30
Nominal flow rate: bbl/min 1,000
Feed pump make / model: HALCO 2500 Superme
Type/size: Centerfugal / 3X2X13
Capacity: gpm 1000
Drive motor hp: hp 75
Is pump dedicated to degasser: yes / no Yes
Vacuum pump make / type: Ingersol Rand / D-255

Make / type:
Nominal flow rate: bbl/min
Feed pump make / model:
Type/size:
Capacity: gpm
Drive motor hp: hp
Is pump dedicated to degasser: yes / no
Vacuum pump make / type:

F.2.12 Mud Agitators

Quantity: no. 8
Make/model: LIGHTNIN / Series 10 Model 16-Q-5
Driven by motor of power: hp Siemens Electric Motor 5HP 865 RPM
Located in tanks: Pits 3-4-5/ 2 in each
(see F.2.1 and F.2.2 for tank designations)

Quantity: no. 1

829510213.xlsxF Page 36 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

Make/model: LIGHTNIN / Series 10 Model 15-Q-5
Driven by motor of power: hp Siemens Electric Motor 5 HP 1,725 RPM
Located in tanks: Pit 1-2 / Slug
(see F.2.1 and F.2.2 for tank designations)

Quantity: no. N/A

Make/model:
Driven by motor of power: hp
Located in tanks:
(see F.2.1 and F.2.2 for tank designations)

Quantity: no.
Make/model:
Driven by motor of power: hp
Located in tanks:
(see F.2.1 and F.2.2 for tank designations)

F.2.13 Mud Centrifuge

Quantity: no. N/A
Make / model:
Feed pump make/model:
Type/size:
Capacity: bbl/min
Drive motor hp: hp
Is feed pump dedicated to centrifuge: yes / no

Quantity: no.
Make / model:
Feed pump make/model:
Type/size:
Capacity: bbl/min
Drive motor hp: hp
Is feed pump dedicated to centrifuge: yes / no

F.1.14 Mud Laboratory and Facilities

Separate room: yes / no Yes
Equipped with:
Mud balance: yes / no No
Marsh funnel: yes / no No
Filtration kit: yes / no No
Sand content kit: yes / no No
Air conditioning: yes / no Yes
Positive pressure: yes / no No

F.3 Bulk System

F.3.1 Barite / Bentonite Silos
Quantity: no. 3
Capacity of each silo: ft3 1,340
Locations: Port Machinary deck (2) Starboard Machinary Deck (1)

Type weight loadcell: Pancake

Manufacturer: MD Totco
Pressure rating: psi 40
Relief valve(s) installed: yes/no Yes

Quantity: no.
Capacity of each silo: ft3
Locations:
Type weight loadcell:
Manufacturer:
Pressure rating: psi
Relief valve(s) installed: yes/no

F.3.2 Cement Silos

Quantity: no. 4
Capacity of each silo: ft3 1,340
Locations: Bow (4)
Type weight loadcell: Pancake
Manufacturer: MD Totco
Pressure rating: psi 40
Relief valve(s) installed: yes/no Yes

Quantity: no.
Capacity of each silo: ft3
Locations:
Type weight loadcell:
Manufacturer:
Pressure rating: psi
Relief valve(s) installed: yes/no

Separate mud/cement loading facilities: yes / no Yes

Cement discharge independent from
barite / bentonite: yes / no Yes

829510213.xlsxF Page 37 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION F - MUD SYSTEM / BULK SYSTEM Rig Specs

F.3.3 Surge Tank for Barite/Bentonite

Quantity: no. 1
Capacity of each silo: ft3 70
Locations: Above mixing hopper
Type weight loadcell: Totco
Manufacturer: Halliburton
Pressure rating: psi 40
Relief valve(s) installed: yes/no Yes

F.3.4 Mud Hopper

Quantity: no. 3
Make / model: (1) Halco Model 1500 (1)- Vorte Ventures Model V-VE
(1) Donaldson Model 80CAB
Feed pump make/model: (2) HALCO 2500 Supreme 8X6X14 (2) HALCO 6x5
TurboShear
Type / size:
Capacity: bbl/min 57
Drive motor hp: hp Mixing 100 HP @ 1,185 RPM Shear 75 HP @ 1,775
RPM
Is feed pump dedicated to mud hopper(s): yes / no Yes

F.3.5 Surge Tank for Cement

Quantity: no. 1 (Halliburton Unit)
Capacity of each silo: ft3
Locations:
Type weight loadcell:
Manufacturer:
Pressure rating: psi
Relief valve(s) installed: yes/no

F.3.6 Bulk Transfer System

(see also C.1.7 compressed air systems)
Independent air system for the silos and surge
tanks consisting of a high-volume low-
pressure compressor and air drier: yes / no Yes
Air reduced from main air supply through
pressure regulators: yes / no Yes
Separate volume tank and drier: yes / no Drier Yes, Tank No

829510213.xlsxF Page 38 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION G - CASING / CEMENTING EQUIPMENT Rig Specs

G.1 Casing Equipment
G.1.1 Drive Hammer N/A
Make / type:
Maximum casing / conductor OD: in

G.1.2 API Casing Drifts N/A

For casing OD, weight, quantity: in/lbs/ft/no
For casing OD, weight, quantity: in/lbs/ft/no
For casing OD, weight, quantity: in/lbs/ft/no
For casing OD, weight, quantity: in/lbs/ft/no
For casing OD, weight, quantity: in/lbs/ft/no
For casing OD, weight, quantity: in/lbs/ft/no

G.1.3 Clamp-on Casing Thread Protectors N/A

For casing OD, quantity: in/no
For casing OD, quantity: in/no
For casing OD, quantity: in/no
For casing OD, quantity: in/no
For casing OD, quantity: in/no
For casing OD, quantity: in/no

G.1.4 Side Door Casing Elevator

Quantity: no. 1
For OD casing: in 20"
Make/type: BJ
Capacity: st 150 MT

Quantity: no. 1
For OD casing: in 13 3/8"
Make/type: BJ
Capacity: st 150 MT

Quantity: no. 1
For OD casing: in 9 5/8"
Make/type: BJ
Capacity: st 150 MT

Quantity: no. 1
For OD casing: in 7"
Make/type: BJ
Capacity: st 150 MT

Quantity: no.
For OD casing: in
Make/type:
Capacity: st

Quantity: no.
For OD casing: in
Make/type:
Capacity: st

G.1.5 Single Joint Casing Elevators

Quantity: no. 1
For OD casing: in 20"
Make/type: Joy

Quantity: no. 1
For OD casing: in 13 3/8"
Make/type: BJ

Quantity: no. 1
For OD casing: in 9 5/8"
Make/type: "J"

Quantity: no. 1
For OD casing: in 7"
Make/type: "J"

Quantity: no.
For OD casing: in
Make/type:

Quantity: no.
For OD casing: in
Make/type:

G.1.6 Slip Type Elevator/Spiders N/A

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

829510213.xlsxG Page 39 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION G - CASING / CEMENTING EQUIPMENT Rig Specs

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

Quantity: no.
Make/type:
Pneumatic/manual:
Capacity: st
Slips for OD casing sizes: in

G.1.7 Casing Slips

Quantity: no. 1
Make/type: Varco
For OD casing: in 20"

Quantity: no. 1
Make/type: Varco
For OD casing: in 13 3/8"

Quantity: no. 1
Make/type: Varco
For OD casing: in 9 5/8"

Quantity: no. 1
Make/type: Varco
For OD casing: in 7"

Quantity: no.
Make/type:
For OD casing: in

Quantity: no.
Make/type:
For OD casing: in

G.1.8 Casing Bowls

Quantity: no.
Make/type:
For OD casing (maximum): in

Quantity: no.
Make/type:
For OD casing (maximum): in

Quantity: no.
Make/type:
For OD casing (maximum): in

G.1.9 Manual Casing Tongs

Quantity (sets): no. 1
Make/type: Web Wilson " AAX" Tongs
W/jaws for OD casing (max/min): in/in 20" / 7"

Quantity (sets): no.

Make/type:
W/jaws for OD casing (max/min): in/in

Quantity (sets): no.

Make/type:
W/jaws for OD casing (max/min): in/in

Quantity (sets): no.

829510213.xlsxG Page 40 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION G - CASING / CEMENTING EQUIPMENT Rig Specs

Make/type:
W/jaws for OD casing (max/min): in/in

G.1.10 Power Casing Tongs N/A

Quantity: no.
Make/type:
W/jaws for OD casing (max/min): in/in
Max output torque: ft-lbs
Torque indicator: yes / no
Back-up arm: yes / no

Quantity: no.
Make/type:
W/jaws for OD casing (max/min): in/in
Max output torque: ft-lbs
Torque indicator: yes / no
Back-up arm: yes / no

G.1.11 Power Unit for Casing & Tubing Tongs N/A

Quantity: no.
Make/type:
Capacity (ea): gpm
Output pressure: psi
Dedicated unit: yes / no

G.1.12 Casing Circulating Head (Swedge) N/A

For OD casing: in
Connection type: top/bottom

For OD casing: in
Connection type: top/bottom

For OD casing: in
Connection type: top/bottom

For OD casing: in
Connection type: top/bottom

For OD casing: in
Connection type: top/bottom

For OD casing: in
Connection type: top/bottom

G.1.13 Casing Spears (Internal) N/A

Quantity: no.
Make/type:
For OD casing: in
For casing weight: lbs/ft
Pack-off: yes / no

Quantity: no.
Make/type:
For OD casing: in
For casing weight: lbs/ft
Pack-off: yes / no

Quantity: no.
Make/type:
For OD casing: in
For casing weight: lbs/ft
Pack-off: yes / no

G.1.14 Casing Cutters (Internal) N/A

Quantity: no.
Make/type:
For OD casing (max/min): in

Quantity: no.
Make/type:
For OD casing (max/min): in

Quantity: no.
Make/type:
For OD casing (max/min): in

G.1.15 Crossover to Handle Casing w/ Drill Pipe N/A

Quantity: no.
For OD casing; in
Casing connection type:
Drill pipe connection type:
Rated capacity: st

829510213.xlsxG Page 41 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION G - CASING / CEMENTING EQUIPMENT Rig Specs

Quantity: no.
For OD casing; in
Casing connection type:
Drill pipe connection type:
Rated capacity: st

Quantity: no.
For OD casing; in
Casing connection type:
Drill pipe connection type:
Rated capacity: st

G.1.16 Casing Scrapers

Quantity: no.
Make:
For OD casing: in
For casing weight: lbs/ft
OD body: in
Connection type:
Blade type (roller / fixed):

Quantity: no.
Make:
For OD casing: in
For casing weight: lbs/ft
OD body: in
Connection type:
Blade type (roller / fixed):

Quantity: no.
Make:
For OD casing: in
For casing weight: lbs/ft
OD body: in
Connection type:
Blade type (roller / fixed):

Quantity: no.
Make:
For OD casing: in
For casing weight: lbs/ft
OD body: in
Connection type:
Blade type (roller / fixed):

G.2 Cementing Equipment

G.2.1 Cement Unit
Owner: Halliburton
Free placement basis: yes / no No
Make / type: HT-400 pumps with Detroit Diesel engines
No. of triplex pumps: no. 2
Maximum working pressure: psi 12,000
Maximum flowrate (total): bbl/min 9 bpm
Unit powered by (electric/diesel): Diesel
Recirculating mixing system: yes / no Yes
Capacity: bbl 7 bbl
Motor power: hp Hydraulic
Liquid additive system: yes / no No
Premix / batch tank: yes / no No
Quantity: no.
Capacity (total): bbl
Pressure recorder: yes / no Yes
Densometer recording device: yes / no Yes

G.2.2 Cementing Manifold

Discharge manifold working pressure: psi 10,000 PSI
Cement pump dischage lines min. ID: in 1 3/4"
Cement pump disc. lines working pressure: psi 10,000 PSI
Manifold safety pressure relief valve: yes / no Yes

G.2.3 Cementing Standpipe

Quantity: no. 1
Working Pressure: psi 10,000
ID: in 1 3/4"
Connection to choke manifold: yes / no Yes
Connection to standpipe manifold: yes / no Yes

G.2.4 Cementing Kelly N/A

Quantity: no.
Nominal size OD: in
Total length: ft
Working length: ft
Connection type:

829510213.xlsxG Page 42 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION G - CASING / CEMENTING EQUIPMENT Rig Specs

Cement head: yes / no

G.2.5 Cementing Tubing N/A

Size: in
Length (total): ft
X-overs to drillpipe specified in section D.1.3: yes / no

829510213.xlsxG Page 43 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION H - INSTRUMENTATION / COMMUNICATION Rig Specs

H.1 Drilling Instrumentation at Drillers Position
H.1.1 Weight Indicator
Make / type: Petron 100 / EB
Sensor type: Hydraulic

H.1.2 Standpipe Pressure Gauges

Quantity: no. 1
Make / type: HDI /2000P Series
Maximum pressure reading: psi 0-16,000 PSI

Quantity: no.
Make / type:
Maximum pressure reading: psi

Quantity: no.
Make / type:
Maximum pressure reading: psi

H.1.3 Choke Manifold Pressure Gauges

Quantity: no. 1
Make / type: HDI / 2000 P series
Maximum pressure reading: psi 0-16,000 PSI

Quantity: no.
Make / type:
Maximum pressure reading: psi

H.1.4 Rotary Instrumentation

H.1.4.1 Tachometer
Make / type: NOV-RSS/ Wagner
Maximum RPM: rpm 0-350

H.1.4.2 Torque Indicator

Make / type: Wagner
Maximum torque: ft-lbs 52,000

H.1.5 Top Drive Instrumentation

H.1.5.1 Tachometer
Make / type: NOV-RSS/ Wagner
Maximum RPM: rpm 0-350 RPM
H.1.5.2 Torque Indicator
Make / type: NOV-RSS/ Wagner WM 137P-18
Maximum torque: ft-lbs 50,000

H.1.6 Pump Stroke Counters

Quantity: no. 3
Make / type: NOV RigSense / Proxmity Sensor
Stroke indicator and cumulative stroke
counter for each pump: yes / no Yes

H.1.7 Tong Torque Indicator

Make / type: NOV RigSense
Maximum torque: ft-lbs 0-100,000 Ft / Lbs

H.1.8 Pit Volume Totalizer

Make/model: NOV RigSense
Float in active mud tanks: yes / no Yes
Quantity per tank: no. 1
Floats in reserve mud tanks: yes / no Yes
Quantity per tank: no. 1
Floats in mud processing tanks: yes / no Yes
Quantity per tank: no. 1
Loss/Gain indicator: yes / no Yes
Audio Alarm: yes / no Yes
Visual Alarm: yes / no Yes

H.1.9 Mud Flow Indicator

Make / Model: NOV RigSense
High / low alarm: yes / no Yes
Audio Alarm: yes / no Yes
Visual Alarm: yes / no Yes
Sensor location: Flow Line

H.1.10 Trip Tank Indicator

Make / model: NOV RigSense
Chart recorder: yes / no Yes
Alarm: yes / no Yes

H.1.11 Automatic Driller (see B.2.1) Yes

H.1.12 Remote Choke Control Unit (seeE.5) Yes

H.1.13 Crown Clearance Indicator: yes / no Yes

829510213.xlsxH Page 44 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION H - INSTRUMENTATION / COMMUNICATION Rig Specs

Make / type: Stewart and Stevenson / TCB

H.2 Drilling Parameter Recorder

Quantity: no. 1
Make / type: NOV RigSense
Location - 1: Rig Floor
Type (display/recorder/both): Display
Location - 2: OIM
Type (display/recorder/both): Both
Location - 3: Client Office
Type (display/recorder/both): Display
Number of parameters recorded: no. 38
Parameter recorded:
Parameter recorded:
Parameter recorded:
Parameter recorded:
Parameter recorded:
Parameter recorded:
Parameter recorded:
Parameter recorded:

H.3 Instrumentation at Choke Manifold

H.3.1 Standpipe Pressure Gauge
(Drillpipe pressure gauge)
Quantity: no. 1
Make / type: HDI/2000 P Series
Pressure range (maximum): psi 0-16,000

Quantity: no. 1
Make / type: RigSense
Pressure range (maximum): psi 5,000

Quantity: no.
Make / type:
Pressure range (maximum): psi

Visable from choke operating position: yes / no Yes

H.3.2 Choke Manifold Pressure Gauge

(Casing pressure gauge)
Quantity: no. 1
Make / type: HDI / 2000 P series
Pressure range: psi 16,000

Quantity: no. 1
Make / type: RigSense
Pressure range: psi 10,000

Quantity: no.
Make / type:
Pressure range: psi

H.4 Instrumentation at Standpipe

H.4.1 Standpipe pressure gauge
Quantity: no. 1
Make / type: HDI / 2000 P series
Pressure range: psi 16,000

Quantity: no. 1
Make / type: RigSense
Pressure range: psi 5000

Quantity: no.
Make / type:
Pressure range: psi

Visable from Drillers Position: yes / no Yes

Visable from Choke Operating Position: yes / no Yes

H.5 Deviation Equipment N/A

H.5.1 Deviation Recorder
Quantity: no.
Make / type:
Deviation Range:

Quantity: no.
Make / type:
Deviation Range:

H.5.2 Slickline Unit (see B.2.4)

H.6 Rig Communications Systems

H.6.1 Rig Telephone System

829510213.xlsxH Page 45 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION H - INSTRUMENTATION / COMMUNICATION Rig Specs

No of stations: no. 46
Make / type: Gai - Tronic / 3R
Explosion proof: yes / no Yes

No of stations: no.
Make / type:
Explosion proof: yes / no

No of stations: no.
Make / type:
Explosion proof: yes / no

H.6.2 Public Address System

Can be combined with H.6.1 above: yes / no Yes
No of stations: no. 46
Make / type: Gai - Tronic / EKSU
Explosion proof: yes / no Yes

H.6.3 Drill Floor Talkback System

No of stations: no. 2
Location: Driller Shack
Location: Monkey Board
Location:
Make / type: Gai - Tronic / C-HA -10 / GM -P1-F
Explosion proof: yes / no Yes

H.6.4 Hand-Held VHR Radios

Quantity: no. 14
Quantity intrinsically safe: no. 14

H.6.5 Crane Communication System

Quantity: no. 3
Make / type: Gai - Tronic / EKSU
Explosion proof: yes / no Yes
Part of rig telephone system (H.6.1): yes / no Yes
Part of public address system (H.6.2): yes / no Yes

H.7 Environmental Instrumentation

H.7.1 Temperature Indicators
Air temperature (make / model): Yes
Recorder: yes / no No
Sea water temperature (make / model): No
Recorder: yes / no No

H.7.2 Barometric Pressure Indicator

Make / model: Weems & Plath / Admiral
Recorder: yes / no No

H.7.3 Humidity Sensing Indicator

Make / model: No
Recorder: yes / no

H.7.4 Wind Speed / Direction Meter

Make / model: Bendix / 135 analog
Recorder: yes / no No

H.7.5 Wave Profile Indicator N/A

Make / model:
Recorder: yes / no

H.7.6 Current Indicator N/A

Make / model:
Located at:
Recorder: yes / no

H.7.7 Weather Facsimile

Make / model: Furuno / NX 500
Located at:
Recorder: yes / no Yes

H.8 Navigation Instrumentation

H.8.1 Gyro Compass N/A
Make / model:
Located at:

H.8.2 Depth Sounder

Make / model: Konsberg Simard / EC -210
Located at: Barge control room
Recorder: yes / no No

H.8.3 Radar N/A

Make / model:
Located at:

829510213.xlsxH Page 46 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION H - INSTRUMENTATION / COMMUNICATION Rig Specs

Recorder: yes / no

H.9 External Communications Equipment

H.9.1 SSB Transceiver
Location(s): Radio Room , Barge Control room
Quantity: no. 2
Make / model: Furuno / FS -1562 -25
Power: watts
Frequency ranges (low/high): mhz/mhz
(Sythensized crystal):
Facimile capable (see also H.9.9): yes / no
Telex capable (see also H.9.10): yes / no

Location(s):
Quantity: no.
Make / model:
Power: watts
Frequency ranges (low/high): mhz/mhz
(Sythensized crystal):
Facimile capable (see also H.9.9): yes / no
Telex capable (see also H.9.10): yes / no

H.9.2 E.P.I.R.B's
Quantity: no. 1
Make / model: Kanned / EPIRB 406
Locations: Top Of Radio Room

Quantity: no.
Make / model:
Locations:

H.9.3 Marine VHF Radio

Quantity: no. 3
Make / model: Furuno / FM 8500
Power: watt Transmit 150W Receive 10W
Channels: Jan-88
Locations: Radio Room , Brage Control Room

Quantity: no.
Make / model:
Power: watt
Channels:
Locations:

Quantity: no.
Make / model:
Power: watt
Channels:
Locations:

H.9.4 Aircraft Radio Beacon Transmitter

Quantity: no. 1
Make / model: Southern Avionics / SA 100
Power: watt AC/DC range 190-535 Khz

H.9.5 Aeronautical VHR Transceiver

Quantity: no. 3
Make / model: (1) ICOM / PS 80 (2) ICOM / IC A24
Power: watt 16
Frenquency range (low/high): mhz/mhz 118.0 / 136.7
(Synthesized/crystal): Synthesized
Location(s): Radio Room

H.9.6 Watch Receiver

Quantity: no. 2
Make / model: Furuno / AA 50
Frequency: khz 2187.5

H.9.7 Satellite Communication System

Make / model: Rignet
Type:
Facimile capable (see also H.9.9): yes / no Yes
Telex capable (see also H.9.10): yes / no No
Location(s): Dish - On Port & Starboard Stern / Equipment -
Equipement room

H.9.8 Cellular
No of phone lines: no. N/A

H.9.9 Facsimile
Make / model: Hewitt Packard / Laser Jet 3050
Connected to: Caprock Satellite System

829510213.xlsxH Page 47 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION H - INSTRUMENTATION / COMMUNICATION Rig Specs

Make / model:
Connected to:

H.9.10 Telex N/A

Make / model:
Connected to:

Make / model:
Connected to:

H.9.11 Scrambler N/A

Make / model:
Connected to:

H.9.12 Other Communication Systems

Make / model: Furuno / Felcom -12 inmarsat -C Mobile Earth Station

Connected to: Inmarsat System

Make / model:
Connected to:

829510213.xlsxH Page 48 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION I - PRODUCTION TEST EQUIPMENT Rig Specs

I.1 Burners
Make / type: N/A
Quantity: no.
Capacity: bbl/day
Weight: st
Water requirement at 100 psi: bbl/min

I.2 Burner Booms N/A

Make / type:
Quantity: no.
Length: ft
Horizontal: yes / no
Maximum wind speed: knots
Walkway and handrails: yes / no
Burner platform size: ft x ft
Burner mounting rotatable: yes / no

I.3 Piping on Burner Booms

1.3.1 Oil Line N/A
ID: in
Working pressure: psi
Connection type at burner end:
H2S: yes / no
Pressure gauge connection at barge end: in

I.3.2 Gas Line

ID: in N/A
Working pressure: psi
Extended beyond burner by: ft
Connection type at burner end:
H2S: yes / no
Pressure gauge connection at barge end: in

I.3.3 Water Line N/A

ID: in
Working pressure: psi
Connection type at burner end:
H2S: yes / no
Pressure gauge connection at barge end: in

I.3.4 Air Line N/A

ID: in
Working pressure: psi
Connection type at burner end:
Pressure gauge connection at barge end: in

I.3.5 Pilot Gasline N/A

ID: in
Working pressure: psi
Connection type at burner end:
Pressure gauge connection at barge end: in

I.4 Sprinkler System

System in place: yes / no Yes
Pump source: Sea Water Pump

I.5 Fixed Piping for Well Testing

I.5.1 Drillfloor to Separator Area
Type (threaded/welded/both): N/A
Quantity: no.
Size ID: in
Working Pressure: psi
Connection on drillfloor: type
Connection at separator: type
Number of valves / lines: no.
Size of valves: in
H2S: yes / no

I.5.2 Separator Area to Burner Booms

Service (oil/gas): N/A
Type (threaded/welded/both):
Quantity: no.
Size ID: in
Working Pressure: psi
Connection on drillfloor: type
Connection at separator: type
Number of valves / lines: no.
Size of valves: in
H2S: yes / no
Valves installed near separator area for
switching gas to either burner: yes / no

Service (oil/gas): N/A

Type (threaded/welded/both):
Quantity: no.
Size ID: in
Working Pressure: psi
Connection on drillfloor: type
Connection at separator: type
Number of valves / lines: no.

829510213.xlsxI Page 49 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION I - PRODUCTION TEST EQUIPMENT Rig Specs

Size of valves: in
H2S: yes / no
Valves installed near separator area for
switching gas to either burner: yes / no

I.5.3 Water Lines to Burner Booms N/A

Type (threaded/welded/both):
Quantity: no.
Size ID: in
Working Pressure: psi
Number of valves required: no.
Size of valves: in
Pump source:
Rated line capacity at 300 psi: bbl/hr

I.5.4 Air System to Burner Booms

Type (threaded/welded/both): Both
Quantity: no. 4
Size ID: in 1 1/2"
Working Pressure: psi 110
Non-return valves fitted: yes / no No
Air source: Rig Air

I.5.5 Oil Storage Tank to Offload N/A

Type (threaded/welded/both):
Quantity: no.
Size ID: in
Working Pressure: psi
Connection at separator area:

I.5.6 Separator to Vent Stack of Rig

Type (threaded/welded/both):
Quantity: no.
Size ID: in
Working Pressure: psi
Connection at separator area:

I.6 Auxiliary Power Available N/A

I.6.1 For Field Laboratory
Quantity: no.
Volts: volts
Frequency: hz
Breaker amp

I.6.2 For Crude Transfer Pump N/A

Quantity: no.
Volts: volts
Frequency: hz
Breaker amp

I.6.3 For Electric Heaters N/A

Quantity: no.
Volts: volts
Frequency: hz
Breaker amp

829510213.xlsxI Page 50 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION J - WORKOVER TOOLS

829510213.xlsxJ Page 51 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION K - ACCOMMODATION Rig Specs

K.1 Offices
K.1.1 Company Representative's Office
Quantity: no. 2
Number of combination office/staterooms in
above: no. 0
Complete with desk, filing cabinet(s) and
other necessary furniture: yes / no Yes
Quantity with unrestricted view to drill floor: no. 1

K.1.2 Contractor Representative's Offices

Quantity: no. N\A
Quantity with unrestricted view to drill floor no.

K.1.3 Control Room

Quantity: no. 1

K.1.4 Radio Room

Quantity: no. 1

K.1.5 Helicopter Ready Room

Quantity: no. 1

K.1.6 Hospital Room

Number of beds/bunks: no. 1 bed & 1 examination table.

Dangerous drugs locker: yes / no Yes

K.2 Living Quarters

K.2.1 Accommodations
Total beds: no. 116
No. of beds per room type (1,2,3 etc): no. 2
Number of rooms: no. (11) 2 man room
Toilets (private/shared/communal): (6) Shared
Showers (private/shared/communal): (6) Shared

No. of beds per room type (1,2,3 etc): no. 4

Number of rooms: no. (22) 4 man room
Toilets (private/shared/communal): (11) Communal
Showers (private/shared/communal): (11) Communal

No. of beds per room type (1,2,3 etc): no. 6

Number of rooms: no. (1) 6 man room
Toilets (private/shared/communal): Communal
Showers (private/shared/communal): Communal

No. of beds per room type (1,2,3 etc): no.

Number of rooms: no.
Toilets (private/shared/communal):
Showers (private/shared/communal):

No. of beds per room type (1,2,3 etc): no.

Number of rooms: no.
Toilets (private/shared/communal):
Showers (private/shared/communal):

No. of beds per room type (1,2,3 etc): no.

Number of rooms: no.
Toilets (private/shared/communal):
Showers (private/shared/communal):

829510213.xlsxK Page 52 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION K - ACCOMMODATION Rig Specs

K.2.2 Galley
Quantity; no. 1

K.2.3 Mess Seating Capacity

Main mess: no. 50
Aux. mess: no. N/A

K.2.4 Meeting Rooms

Quantity; no. 1

K.2.5 Recreation Rooms

Quantity: no. 1
Recreation facility:
TV: no. 1
VCR: no. no
Pool Table: no. no
Ping Pong Table: no. no
Computer: no. 3
Workout/Weight Room: no. no
Other: no.

K.2.6 Other Rooms

Change Rooms: no. 1
Prayer Rooms: no.
Cinema: no. 0
Other: no. 1 (smoking room)

829510213.xlsxK Page 53 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

L.1 General Safety Equipment Yes
L.1.1 General Personnel Protective Gear Yes
Safety glasses:
(contractor/everyone not supplied):
Safety hats:
(contractor/everyone not supplied):
Safety boots:
(contractor/everyone not supplied):
Safety Clothing:
(contractor/everyone not supplied):
Ear protection:
(contractor/everyone not supplied):
Rubber gloves:
(contractor/everyone not supplied):
Rubber aprons:
(contractor/everyone not supplied):
Rubber gloves (elbow length):
(contractor/everyone not supplied):
Fullface visors:
(contractor/everyone not supplied):
Eye shields:
(contractor/everyone not supplied):
Dust masks
(contractor/everyone not supplied):
Explosion proof handtorches:
(contractor/everyone not supplied):
Safety belts c/w lines:
(contractor/everyone not supplied):

L.1.2 Decontamination Stations No

L.1.2.1 Eye Wash Stations
Quantity - fixed: 4
Make / model: Haws / Combination Complete 8330
Locations(s): BJ Cement Room , Mixing Room , Rig Floor and shakers

Quantity - portable: 4
Make / model: Haws (2) -32 Oz Bottle / MN 5BK 9791
Locations(s): Main Deck , Rig floor , Electrical Shop , Paint Locker and
BJ room

L.1.2.2 Safety Showers

Quantity: 4
Location(s): Cement room , Mixing room , rig floor and shakers

L.1.3 Derrick Safety Equipment

Derrick escape chute (rem chute) no. No
Make / type:
Geronimo line: yes / no YES
Derrick safety belts:
Make / type: Sala
Derrick safety belts:
Make / type:

L.1.4 Derrick Climbing Assistant N/A

Make / type:

L.1.5 Fresh Air Blowers (Bug Blowers)

Quantity: no. 4
Make / type:
Located at:
Located at:

L.2 Gas / Fire / Smoke Detection

L.2.1 H2S Monitoring System -
Make / type: DETCON
Sampling points at: 1212B-FB
Bellnipple: yes / no Yes
Drillfloor: yes / no Yes
Shale shaker: yes / no Yes
Mud tanks: yes / no Yes
Ventilation system into living quarters: yes / no No
Other: Pumproom, Main deck, Flow Line, Jacket, Top deck
Alarms at:
Drillers console (audible/visual/both): Both
Engine room (audible/visual/both): Both
Mud room (audible/visual/both): Both
Quarters each level (audible/visual/both): Both
Central area each structural level (audible/visual/both): Audible
Other:
Tied to General Alarm: yes / no No
Central control panel: Yes
Located at: Radio Room
Local alarm (audible/visual/both): Both

L.2.2 Combustible Gas Monitoring System DETCON

Make / type: 1212-N4X
Sampling points at:
Bellnipple: yes / no Yes
Drillfloor: yes / no Yes

829510213.xlsxL Page 54 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

Shale shaker: yes / no Yes
Mud tanks: yes / no Yes
Ventilation system into living quarters: yes / no No
Other: Pumproom, Main deck, Flow Line, Jacket, Top deck
Alarms at:
Drillers console (audible/visual/both): Both
Engine room (audible/visual/both): Both
Mud room (audible/visual/both): Both
Quarters each level (audible/visual/both): Audible
Central area each structural level (audible/visual/both): Audible
Other: N/A
Tied to General Alarm: yes / no No
Central control panel: Yes
Located at: Port P - Tank
Local alarm (audible/visual/both): Yes

L.2.3 H2S Detectors (Portable)

Quantity: no. 4 (Multi Gas)
Make / type: Honeywell
Stain tubes for H2S: measuring range:
from 1 to 20 percent: %
from 5 to 60 percent: %

L.2.4 Explosimeters
Quantity: no. 4 (Multi Gas)
Make / type: Honeywell

L.2.5 C02 Gas Detectors (Portable)

Quantity: no. 4 (Multi Gas)
Make / type: Honeywell
Stain tubes for H2S: measuring range: No
from 1 to 20 percent: %
from 5 to 60 percent: %

L.2.6 O2 Meter (Portable)

Quantity: no. 4 (Multi Gas)
Make / type: Honeywell

L.2.7 Fire/Smoke Detectors in Accommodation

Make / type: Uniter / T100
Fire detection: yes / no Yes
Central control panel: yes / no Yes
Location: yes / no Radio Room / OIM Office
Alarms: no. 14
Pull boxes: no. 4

L.3 Fire Fighting Equipment

L.3.1 Fire Pumps
Quantity: no. 1

Make / model: Crane Deming

Type: Vertical Turbine
Output (each): US gal/min 30 bph

Location:

Quantity: no. 1
Make / model: Halco
Type: Centrifugel
Output (each): US gal/min 100
Location:

All offtake points supplied by all pumps: yes / no

L.3.2 Hydrants and Hoses

Hydrants positioned such that any point may be
reached by a single hose length from two
separate hydrants: yes / no Yes
Quantity of hydrants: no. 28
Hose connections / hydrant no. (7) 1 1/2" (21) 2 1/2" hose connection
Hose max. diameter: in 2.5"
Length: ft 15.24 Meter

L.3.3 Portable Fire Extinguishers

Quantity (total): no. 107
Type 1 - CO2: no./lbs 37 / 2.2 Kilo to 50 lbs
no./lbs
Type 2 - Dry Chemical: no./lbs 7 /5 Lbs
no./lbs 26 / 10 Lbs
no./lbs 1 /15 Lbs
Type 3 - Foam: no./lbs 4 /9 Liter
no./lbs
no./lbs
Water: no./lbs no
no./lbs
no./lbs
Halon: no./lbs no
no./lbs

829510213.xlsxL Page 55 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

L.3.4 Fire Blankets
Quantity: no. 8
Location(s): Gally / Welding shop / Engine room / Rig floor / Helideck
/ Firefighting station

L.3.5 Fixed Foam System N/A

Make / type:
Quantity of foam concentrate stored: US gal
Foam type:
Application rate: US gal/min
Foam nozzles: no.
Located at:
Located at:
Located at:
Automaticall injected into fixed
fire water system: yes / no

Make / type:
Quantity of foam concentrate stored: US gal
Foam type:
Application rate: US gal/min
Foam nozzles: no.
Located at:
Located at:
Located at:
Automaticall injected into fixed
fire water system: yes / no

L.3.6 Helideck Foam System

Make / type: Rockwood / Balanaced pressure proportioning system

Quantity of Monitors: no. 2

Quantity of foam concentrate stored: US gal 50
Foam type: AFFF 3%
Application rate: US gal/min

L.3.7 Fixed Fire Extinguishing System

Protected spaces:
Engine room, type (Halon/CO2/Other): Co2
Remote manual release located at: Co2 room engine room access
Paint locker, type (Halon/CO2/Other): Co2
Remote manual release located at: Paint locker
Emergency generator type (Halon/CO2/Other): N/A
Remote manual release located at: Co2
SCR room type (Halon/CO2/Other): Co2
Remote manual release located at:
Other (specify location and type): Pit room C02
Remote manual release located at: Pump room
Alarms (audible, visual or both): Both
Automatic shutdown of ventilation fans
in protected spaces: yes / no Yes

L.3.8 Manual Water Deluge System

Protected space:
Protected space:
Water supplied from fire main line: yes / no

L.3.9 Water Sprinkler System in Accommodation:

Automatic activation: yes / no
Working pressure: psi
Tank capacity: gal
SeaWater backup: yes / no
Type (wet pipe / dry pipe):

L.4 Breathing Apparatus -

L.4.1 General Sets
Quantity: no. 6
Make: MSA
Type (demand/positive pressure): Positive
Cascade system quick connects: yes / no
Cylinder duration: min
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc

Quantity: no.
Make:
Type (demand/positive pressure):
Cascade system quick connects: yes / no
Cylinder duration: min
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc

829510213.xlsxL Page 56 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

Quantity: no.
Make:
Type (demand/positive pressure):
Cascade system quick connects: yes / no
Cylinder duration: min
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc
Located at: qty/loc

L.4.2 Escape Sets

Quantity: no.
Make:
Type (demand/positive pressure):
Cascade system quick connects: yes / no
Cylinder duration: min
Located at: qty/loc
Located at: qty/loc

Quantity: no.
Make:
Type (demand/positive pressure):
Cascade system quick connects: yes / no
Cylinder duration: min
Located at: qty/loc
Located at: qty/loc

L.4.3 Cascade Stations

Quantity: no.
Make / type:
Manifold locations/outlets at location:
Manifold locations/outlets at location:
Manifold locations/outlets at location:
Manifold locations/outlets at location:
Manifold locations/outlets at location:
Manifold locations/outlets at location:

L.4.4 Breathing Air Rechange Compressor

Quantity: no.
Make type:
Compressed air storage capacity: ft3
Working pressure: psi
Located at:
Located at:

Quantity: no.
Make type:
Compressed air storage capacity: ft3
Working pressure: psi
Located at:
Located at:

L.4.5 Compressed Air Breathing Apparatus Trolley Unit

Make:
Type (demand/positive pressure):
Air line length: ft
Compressed air storage capacity: ft3
Working pressure: psi
Including:
Face mask: yes / no
Demand valve: yes / no
Microphone: yes / no
Safety harness: yes / no
Safety line (incorporating telephone line): yes / no

L.4.6 Breathing Air Purity Test Equipment

Quantity: no.
Make / type:

L.5 Emergency First Aid Equipment

L.5.1 First Aid Kits
Quantity: no. 13

L.5.2 Burn Kits

Quantity: no. 2

L.5.3 Resuscitators
Quantity: no. 7 (2 H size & 5 D Size)
Charged (spare) oxygen cylinders: no. 6

L.5.4 Stretchers
Quantity: no. 2
Type: Spinal board with Spider restrain for spinal board
Located at: Clinic, Rig Floor

Quantity: no. 1
Type: Scoop stretcher
Located at: Clinic

829510213.xlsxL Page 57 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

Quantity: no. 2
Type: Basket stretcher w/ restraints
Located at: Main deck., outside of clinic at B deck

L.6 Helideck Rescue Equipment

Aircraft Axe: yes / no Yes
Crowbar: yes / no Yes
Heavy duty hacksaw: yes / no Yes
Spare blades: yes / no Yes
Grapnel hook: yes / no Yes
Length of wire rope attached: ft
Quick release knife: yes / no Yes
Bolt croppers: yes / no Yes
Firemans outfit: yes / no Yes
CO2 lance: yes / no Yes
Other:
Other:

L.7 Emergency Warning Alarms

Approved system to give warning of
different emergencies: yes / no Yes
Activated from drill floor: yes / no Yes

L.8 Survival Equipment

L.8.1 Lifeboats
Make / type: Jiangsu Jiaoyan /JY-QFN-10.9
Quantity: no. life boat # 3
Capacity: person/craft 120
Locations (fwd/aft/port/stbd): Port Side
Fire protection: yes / no Fire Extinguisher and sprinkler system
Radio/EPIRB (see section H.9): Radio and SART

Make / type: Qingdao Beihai / BH-9

Quantity: no. Life Boat # 1
Capacity: person/craft 60
Locations (fwd/aft/port/stbd): STBD FWD
Fire protection: yes / no Fire Extinguisher and sprinkler system
Radio/EPIRB (see section H.9): Radio and SART

Make / type: Qingdao Beihai / BH-9BH-9

Quantity: no. Life Boat # 2
Capacity: person/craft 60
Locations (fwd/aft/port/stbd): STBD AFT
Fire protection: yes / no Fire Extinguisher and sprinkler system
Radio/EPIRB (see section H.9): Radio and SART

L.8.2 Liferafts
Make / type: RFD / Surviva MK III TO
Quantity: no. 5
Capacity: person/craft 25
Davit launched: yes / no No ( Roll Over Type)
Locations (fwd/aft/port/stbd): 3 Port side and 3 STBD Side and 1 spare

Make / type: RFD / Surviva MK IV

Quantity: no. 2
Capacity: person/craft 25
Davit launched: yes / no No ( Roll Over Type)
Locations (fwd/aft/port/stbd): 3 Port side and 3 STBD Side and 1 spare

L.8.3 Fast Rescue Boat N/A

Make / type:
Engine power: hp

L.8.4 Personal Floatation Devices

Make / type: PFD / ILJ-110
Quantity: no. 200

L.8.5 Survival Suits N/A

Make / type:
Quantity: no.

Make / type:
Quantity: no.

L.8.6 Life Ring Buoys

Make / type: Rotadyne / DX0325D
Quantity total: no. 8
with lights: no. 2
with smoke: no. 2
with EPIRB: no. No

L.8.7 Work Vests

Quantity: no. 18

L.8.8 Escape Ladders / Nets

Make / type: Dongtai City Dongfang Marine /ISO5489 S 129 1.43
Quantity: no. STBD Side # 1

Make / type: Dongtai City Dongfang Marine /ISO5489 S 129 1.43

829510213.xlsxL Page 58 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION L - SAFETY EQUIPMENT Rig Specs

Quantity: no. Port Side # 1

Make / type:
Quantity: no.

829510213.xlsxL Page 59 of 60
 International Association of Drilling ContractorsSTANDARD FORMAT EQUIPMENT LISTJACK-UP DRILLING UNITS

SECTION M - POLLUTION PREVENTION EQUIPMENT Rig Specs

M.1 Sewage Treatment
Make / model: Omnipure / 12 MX
System type: Electric

M.2 Garbage Compaction

Make / model: Tech Oil Products / Enviro Pak 4000 AMR
System type: Hydraulic

Make / model:
System type:

M.3 Garbage Disposal / Drinder

Make / model: Tuff Gut / TGE10
System type: Electric

M.4 Incinerator N/A

Make / model:
System type:

M.5 Oily Water Separator

Quantity: no. 1
Make / model: Victor Marine Ltd / CS5000
System type:
Nominal throughput: gpm 22 gpm

829510213.xlsxM Page 60 of 60