Scribd
Upload
16 views2 pages

7b Automatic Transaxle 0 Specifications

Uploaded by

Hove
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views2 pages

7b Automatic Transaxle 0 Specifications

Uploaded by

Hove
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

17.06.

24, 23:21 Haynes Online - VW Jetta & Golf Automotive Repair Manual

VW Jetta & Golf Automotive Repair Manual

Specifications
General

Designations
6-speed automatic 09G, 09GL
8-speed automatic 09S
6-speed automatic direct shift transaxle 02E, 0D9
7-speed automatic direct shift transaxle 0CW, 0AM, 0GC
Automatic transaxle fluid type and capacity See Chapter 1

Ft-lbs (unless otherwise indicated) Nm

Torque
specifications

Automatic selector cable bracket 80 in-lbs 9


bolt
Transaxle oil cooler fasteners
6-speed transaxle
Round oil cooler bolt 27 36
Rectangle oil cooler bolts 15 20
6-speed DSG transaxle
Step 1 15 20
Step 2 Tighten an additional 90 degrees
Driveplate-to-torque converter 44 60
(new bolts)
6-speed auto transaxle-to-engine
mounting fasteners (see
illustration 11.28a)
Five-cylinder models
Bolts 1 (M10 x 65mm) 30 40
Bolt 2 (M10 x 76mm) 30 40

Bolts 3 (M12 x 65mm) 59 80


Bolt 4 (M12 x 95mm) 59 80
Bolt 5 (M12 x 170mm) 59 80

https://haynesmanualsallaccess-com.ezproxy.ezylogan.org/en-au/cars/volkswagen/jetta/2011-2019/MOL96021/manual/ 1/2
17.06.24, 23:21 Haynes Online - VW Jetta & Golf Automotive Repair Manual

Bolt 6 (M12 x 170mm) 59 80


All 2011 four-cylinder models
Bolts 1 (M10 x 55mm) 30 40
Bolt 2 (M10 x 65mm) 30 40
Bolts 3 (M12 x 55mm) 59 80
Bolt 4 (M12 x 70mm) 59 80
Bolt 5 (M12 x 165mm) 59 80
Bolt 6 (M12 x 165mm) 59 80
6 and 7-speed DSG transaxle-to-
engine mounting fasteners (see
illustration 11.28b)
Bolts 1 (M10 x 50mm) 30 40
Bolts 2 (M12 x 70mm) 59 80
Bolt 3 (M10 x 40mm) 30 40
Bolts 4 (M12 x 55mm) 59 80
Bolt 5 (M10 x 45mm) 30 40

8-speed transaxle-to-engine Not available


mounting fasteners
Transaxle mount*
Mount-to-transaxle bracket
bolts (driver side)
Step 1 29.5 ­40
Step 2 Tighten an additional 90 degrees
Mount-to-body bracket bolts
(driver side)
Step 1 44 60
Step 2 Tighten an additional 90 degrees
Roll restrictor bolts
Subframe
Step 1 96 130
Step 2 Tighten an additional 90 degrees
Transaxle bracket

Step 1 36 50
Step 2 Tighten an additional 90 degrees

* Replace all mount bolts with new ones.

Note:
One foot-pound (ft-lb) of torque is equivalent to 12 inch-pounds (in-lbs) of torque. Torque values below
approximately 15 ft-lbs are expressed in inch-pounds, because most foot-pound torque wrenches are
not accurate at these smaller values.

© 2024 Haynes Manuals, Inc. Contact us

https://haynesmanualsallaccess-com.ezproxy.ezylogan.org/en-au/cars/volkswagen/jetta/2011-2019/MOL96021/manual/ 2/2

You might also like