Scribd
Upload
42 views6 pages

BECAFZAR UPS+HMI Catalog

etrhrthten

Uploaded by

pouyan.h.doabi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views6 pages

BECAFZAR UPS+HMI Catalog

etrhrthten

Uploaded by

pouyan.h.doabi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

INDUSTRAIL UPS SYSTEM DATA SHEET

The BEC AFZAR range of industrial UPS provides


an extremely reliable and high quality source of
continuous AC power. These are true on-line UPS
systems built to client specifications with each
element of the system design chosen to match
project requirements.
This type of UPS system is widely used in the harsh
operating environments encountered in power
generation and distribution, petro-chemical,
industrial process control and onshore or offshore oil
and gas applications.
The Industrial UPS comprises:
DC Charger, Thyristor controlled charger converts
the AC mains supply to a regulated DC bus from
which the battery is charged and inverter powered.
Battery, which is used for energy storage and is
generally of lead acid or nickel cadmium type. The
battery autonomy is sized to the requirement of the
UPS load.
Inverter, IGBT based pulse width modulated inverter
generates a regulated sinusoidal AC output from the
DC bus. A transformer in the inverter output provides
galvanic isolation between the UPS output and
battery.
Static Switch, the UPS output is controlled by the
static switch that selects the inverter output or bypass
supply dependant on operating mode.
Maintenance Bypass provides capability to isolate
the static elements of the UPS and power the load
from the bypass supply during UPS maintenance.

1
FEATURES :

 Output ratings available from 5kVA to 200kVA

 110V DC /220 VDC /360VDC bus.

 HMI Touch screen display, alarm & control panel

 Compatible with lead acid or nickel cadmium


batteries
 Input and output voltage options

 Custom alarm and monitoring configuration options

 Control and distribution options

 Enclosure, IP and paint color options

 110V/220V/380VAC single phase / three phase


output
.
 Bypass transformer option.

 Bypass Stabilizer option.

 Redundant (parallel / hot standby) option.

2
Standard Specification

Ac input
Supply phase & voltage: Three phase 400VAC/440VAC,3ph 4wire with protective earth
Supply voltage variation: +/-10%
Supply frequency: 50Hz with option for 60Hz
Supply frequency variation: +/-5%

UPS Output
Output voltage: 110VAC/220VAC, 380VAC single phase / three phase
Static voltage regulation: +/-2% for 0 -100% load variation
Dynamic voltage regulation: +/-7% for 100% load step,500ms recovery to within static limits
Overload capability: 150% for 1 m inute,125% for 10 m inutes,110% for 20 minutes
Short circuit capability: 2 x rated output current for 5 seconds
Waveform : Sinusoidal
Distortion: <3% with linear load <5% with non linear load
Crest Factor (Load Current): 3:1
Frequency: 50Hz with option for 60H z,+/-0.1% controlled
or synchronized to the bypass supply
Charger 90-95% at full load
Efficiency
Inverter 80-90% depends on model and rating

Mechanical
Protection Rating IP42 ( IP52 option)
Enclosure Finish RAL7032 / RAL 7035
Cooling power module assisted cooling dependant on rating
Audible Noise Level 50 - 65dBA dependant on rating and load

General
Operating temperature range: -10oC to +50°C
Storage temperature range: -20oC to +70°C
Operating altitude: 0 to 1000m
Operating humidity: 10% to 90% RH - non condensing

3
instrumentation & monitoring
HMI touch Screen Display The UPS user interface provides indication of measured UPS
operating values. The settings can be changed and operating mode
selected.
Measured values are displayed on the measurement page.
Main measured value including output voltage and current are
displayed on the main page.
The status of all parts of UPS comprising battery charger and Inverter
and static switch and manual bypass switch and position of input and
output switches and battery circuit breaker indicate on the HMI panel.
A password system protects the UPS configuration against
unauthorized changes.
measurements Rectifier input voltage, output voltage & current
Battery terminal voltage, current & charge state
UPS output voltage, current
Alarm s & Status Comprehensive set of UPS, rectifier, inverter, bypass and battery
alarms and status indications.
Event History The history log can hold up to 1000 events.

Graph The trends of Important parameters such as output current and voltage
and battery current and voltage and main input voltage are displayed
on the graph page.

Analog measurements:
Rectifier measurements Rectifier input voltage, and input current
Rectifier output voltage and current
Battery measurements Battery terminal voltage, current

Inverter /bypass /output AC voltage, AC current and frequency for INV/BYPASS/OUTPUT


measurements (equipped with selector switch for choosing inverter output /bypass
line/UPS output)

4
Other Specification

 Rectifier input isolation transformers

 Bypass isolation transformers option

 Bypass automatic voltage regulators (stabilizer) option

 Charger and battery MCCB

 BYPASS Input MCCB

 Manual Bypass switch (make before break)

 Panel lighting

 Battery autonomies to suit customer requirements

 Remote alarm relay contacts (Rectifier fail - DC fail - Inverter fail- Bypass fail)

HMI mimic panel:

5
Standard Ups single line diagram

You might also like