G Series

LCD Monitor
G274QRFW (3CC2)

User Guide
 Contents
Getting Started............................................................................................................... 3
Package Contents.................................................................................................... 3
Installing the Monitor Stand.................................................................................... 4
Adjusting the Monitor.............................................................................................. 5
Monitor Overview..................................................................................................... 6
Connecting the Monitor to PC................................................................................. 8

OSD Setup...................................................................................................................... 9
Navi Key................................................................................................................... 9
Hot Key..................................................................................................................... 9

OSD Menus.................................................................................................................. 10
Gaming................................................................................................................... 10
Professional........................................................................................................... 12
Image..................................................................................................................... 13
Input Source.......................................................................................................... 14
PIP/PBP................................................................................................................. 15
Navi Key................................................................................................................. 16
Setting.................................................................................................................... 16

Specifications............................................................................................................... 19

Preset Display Modes................................................................................................. 21

Troubleshooting.......................................................................................................... 22

Safety Instructions....................................................................................................... 23

TÜV Rheinland Certification....................................................................................... 25

Regulatory Notices...................................................................................................... 26

Revision
V1.0, 2022/07

2 Contents
Getting Started
This chapter provides you with the information on hardware setup procedures. While
connecting devices, be careful in holding the devices and use a grounded wrist strap
to avoid static electricity.

Package Contents
Monitor G274QRFW

Documentation Quick Start Guide

Stand with Screw(s)

Stand Base with Screw(s)

Accessories
External Power Supply

Power Cord

HDMI Cable (Optional)

Cables
DisplayPort Cable (Optional)

⚠⚠Important
∙∙ Contact your place of purchase or local distributor if any of the items is damaged or
missing.
∙∙ Package contents may vary by country.
∙∙ The included power cord is exclusively for this monitor and should not be used with
other products.

Getting Started 3
 Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.

⚠⚠Important
∙∙ Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙∙ Do not use any sharp objects on the panel.
∙∙ The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
∙∙ This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may
affect the warranty!

4 Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities.

⚠⚠Important
∙∙ Avoid touching the display panel when adjusting the monitor.
∙∙ Please slightly tilt the monitor backwards before pivoting it.

-5° 20°

130mm

45° 45°

90° 90°

Getting Started 5
 Monitor Overview

1 2

4 5 6 6 7

6 Getting Started
 Power LED
1
Lit in white after the monitor is turned on. If no signal input, the LED will
turn into orange. Lit in orange when the monitor is in Stand-by mode.

2 Power Button & Navi Key

3 Cable Routing Hole

4 Power Jack

5 Headphone Jack

6 HDMI Port

7 DisplayPort

Getting Started 7
 Connecting the Monitor to PC
1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Assemble the external power supply & power cord. (Figure A)
4. Connect the external power supply to the monitor power jack. (Figure B)
5. Plug the power cord into the electrical outlet. (Figure C)
6. Turn on the monitor. (Figure D)
7. Power on the computer and the monitor will auto detect the signal source.

A C

8 Getting Started
OSD Setup
This chapter provides you with essential information on OSD Setup.

⚠⚠Important
All information is subject to change without prior notice.

Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu.

Up/Down/Left/Right:
∙∙ selecting function menus and items
∙∙ adjusting function values
∙∙ entering into/exiting from function menus

Press (OK):
∙∙ launching the On-Screen Display (OSD)
∙∙ entering submenus
∙∙ confirming a selection or setting

Hot Key
∙∙ Users may enter into preset function menus by moving the Navi Key up, down, left or
right when the OSD menu is inactive.
∙∙ Users may customize their own Hot Keys to enter into different function menus.

OSD Setup 9
 OSD Menus

⚠⚠Important
The following settings will be grayed out when HDR signals are received:
∙∙ Night Vision
∙∙ MPRT
∙∙ Low Blue Light
∙∙ HDCR
∙∙ Brightness
∙∙ Contrast
∙∙ Color Temperature
∙∙ PIP/PBP

Gaming
1st Level Menu 2nd/3rd Level Menu Description

Game Mode User ∙∙ Use Up or Down Button to select and

preview mode effects.
FPS
∙∙ Press the OK Button to confirm and
Racing apply your mode type.

RTS

RPG

10 OSD Menus
1st Level Menu 2nd/3rd Level Menu Description

Night Vision OFF ∙∙ This function optimizes background

brightness and is recommended for
Normal FPS games.
Strong

Strongest

A.I.

Response Time Normal ∙∙ Response time will be grayed out

while MPRT is enabled.
Fast

Fastest

MPRT OFF ∙∙ When MPRT is enabled, Brightness

cannot be enabled and will be grayed
out.
ON ∙∙ HDCR and MPRT cannot be enabled
simultaneously.
∙∙ MPRT is available when the refresh
rate is over 85Hz.
∙∙ MPRT has to be disabled while
Adaptive-Sync is set to ON.

Refresh Rate Location Left Top ∙∙ Location is adjustable in OSD Menu.

Press the OK Button to confirm and
Right Top apply your Refresh Rate Location.
Left ∙∙ This monitor follows and works at the
Bottom Operating System’s preset Screen
Refresh Rate.
Right
Bottom

Customize

OFF

ON

OSD Menus 11
 1st Level Menu 2nd/3rd Level Menu Description

Alarm Clock Location Left Top ∙∙ After setting the time, press the OK
Button to activate the timer.
Right Top
∙∙ Users have to manually restore their
Left preset Alarm Clock after any AC
Bottom power loss and reconnection.

Right
Bottom

Customize

OFF

15:00 00:01 ~
99:59
30:00

45:00

60:00

Screen None ∙∙ Users can adjust Screen Assistance

Assistance in any mode.
Icon

Adaptive-Sync OFF ∙∙ Adaptive-Sync prevents screen

tearing.
ON

Professional
1st Level Menu 2nd Level Menu Description

Pro Mode User ∙∙ Use Up or Down Button to select and

preview mode effects.
Anti-Blue
∙∙ Press the OK Button to confirm and apply
Movie your mode type.
∙∙ The default setting “Eco” mode meets the
Office
requirements of TÜV Rheinland’s “Low
sRGB Blue Light (Hardware Solution)” standard
and Eyesafe certification.
Eco

12 OSD Menus
1st Level Menu 2nd Level Menu Description

Low Blue Light OFF ∙∙ Low Blue Light protects your eyes against
blue light. When enabled, Low Blue Light
ON adjusts the screen color temperature to a
more yellow glow.
∙∙ When Pro Mode is set to Anti-Blue, it is
mandatory to enable Low Blue Light.
∙∙ This monitor is a Low Blue Light backlight
monitor, it would decrease the blue light
emitted without adjusting OSD function.

HDCR OFF ∙∙ HDCR enhances image quality by

increasing the contrast of images.
ON
∙∙ When HDCR is set to ON, Brightness will be
grayed out.
∙∙ HDCR and MPRT cannot be enabled
simultaneously.

MPRT OFF ∙∙ When MPRT is enabled, Brightness cannot

be enabled and will be grayed out.
ON
∙∙ HDCR and MPRT cannot be enabled
simultaneously.
∙∙ MPRT is available when the refresh rate is
over 85Hz.
∙∙ MPRT has to be disabled while Adaptive-
Sync is set to ON.

Image OFF ∙∙ Image Enhancement enhances image

Enhancement edges to improve their acutance.
Weak

Medium

Strong

Strongest

Image
1st Level Menu 2nd/3rd Level Menu Description

Brightness 0-100 ∙∙ Properly adjust Brightness

according to the surrounding
lighting.
∙∙ Brightness will be grayed
out when MPRT or HDCR are
enabled.

OSD Menus 13
 1st Level Menu 2nd/3rd Level Menu Description

Contrast 0-100 ∙∙ Properly adjust Contrast to relax

your eyes.

Sharpness 0-5 ∙∙ Sharpness improves clarity and

details of images.

Color Cool ∙∙ Use Up or Down Button to select

Temperature and preview mode effects.
Normal
∙∙ Press the OK Button to confirm
Warm and apply your mode type.

Customization R (0-100)

G (0-100)

B (0-100)

Screen Size Auto ∙∙ Users can adjust Screen Size in

any mode, any resolution and any
4:3 screen refresh rate.
16:9

1:1

Input Source
1st Level Menu 2nd Level Menu Description

HDMI1 ∙∙ Users can adjust Input Source in any mode.

HDMI2

DP

Auto Scan OFF ∙∙ Users can use the Navi Key to select Input
Source at below status:
ON
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.

14 OSD Menus
PIP/PBP
1st Level Menu 2nd/3rd Level Menu Description

OFF ∙∙ Enabling PIP (Picture in Picture)

or PBP (Picture by Picture) will
PIP Source HDMI1
affect
HDMI2
• Response Time
DP
• Adaptive-Sync
PIP Size Small • MPRT
Medium • Screen Size 1:1
Large • HDMI CEC
Location Left Top ∙∙ Display Switch allows users to
Right Top switch between primary and
secondary input sources.
Left Bottom
∙∙ If there is only one signal input,
Right the Display Switch and Audio
Bottom Switch will be grayed out.
Customize
Display Switch
Audio Switch
PBP Source 1 HDMI1
HDMI2
DP
Source 2 HDMI1
HDMI2
DP
Display Switch
Audio Switch

OSD Menus 15
 Navi Key
1st Level Menu 2nd Level Menu Description

Up OFF ∙∙ All Navi Key items can be adjusted via

OSD Menus.
Down Brightness
Left
Game Mode
Right
Screen
Assistance

Alarm Clock

Input Source

PIP/PBP Mode

Refresh Rate

Info. On Screen

Night Vision

Setting
1st Level Menu 2nd Level Menu Description

Language 繁體中文 ∙∙ Users have to press the OK Button to

confirm and apply the Language setting.
English
∙∙ Language is an independent setting.
Français Users’ own language setting will override
the factory default. When users set Reset
Deutsch to Yes, Language will not be changed.
Italiano

Español

한국어

日本語

Русский

Português

简体中文

Bahasa Indonesia

Türkçe

(More languages
coming soon)

16 OSD Menus
1st Level Menu 2nd Level Menu Description

Transparency 0~5 ∙∙ Users can adjust Transparency in any

mode.

OSD Time Out 5~30s ∙∙ Users can adjust OSD Time Out in any
mode.

RGB LED Red ∙∙ RGB LED offers unique lighting effects for
your monitor.
Green

Blue

White

Breathing

Marquee

Rainbow

OFF

Power Button OFF ∙∙ When set to OFF, users can press the
power button to turn off the monitor.

Standby ∙∙ When set to Standby, users can press the

power button to turn off the panel and
backlight.

Info. On Screen OFF ∙∙ The information of the monitor status will

be shown on the right side of the screen.
ON

DP OFF ∙∙ To overclock the monitor refresh rate,

OverClocking users have to set DP OverClocking to ON.
ON

OSD Menus 17
 1st Level Menu 2nd Level Menu Description

HDMI CEC OFF ∙∙ HDMI CEC (Consumer Electronics Control)

supports Sony PlayStation®, Nintendo®
ON Switch™, Xbox Series X|S consoles and
various audio-visual devices that are CEC-
capable.
∙∙ If HDMI CEC is set to ON:
• The monitor will automatically power on
when the CEC device is turned on.
• The CEC device will enter power saving
mode when the monitor is turned off.
• When Sony PlayStation®, Nintendo®
Switch™, or Xbox Series X|S console is
connected, Game Mode and Pro Mode
will be automatically set to default
modes and can be adjusted to users’
preferred modes later.

Reset YES ∙∙ Users can Reset and restore settings to

original OSD Default in any mode.
NO

18 OSD Menus
Specifications
Monitor G274QRFW

Size 27 inch

Curvature Flat

Panel Type Rapid IPS

Resolution 2560 x 1440

Aspect Ratio 16:9

Brightness 300 nits (typ.)

Contrast Ratio 1000:1

Refresh Rate 170Hz

Response Time 1ms (GTG)

MPRT 1ms

I/O ∙∙ Power Jack x1

∙∙ Headphone Jack x1
∙∙ HDMI Port x2
∙∙ DisplayPort x1

View Angles 178°(H) , 178°(V)

DCI-P3*/ sRGB 90%/125%

Surface Treatment Anti-glare

Display Colors 1.07B (8bit + FRC)

Monitor Power Options 19V 2.58A

External Power Supply 49W, 19V

Power Input 100~240Vac, 50~60Hz

Power Output 19V 2.58A

Adjustment (Height) 0 ~ 130mm

Adjustment (Tilt) -5° ~ 20°

Adjustment (Swivel) -45° ~ 45°

Adjustment (Pivot) -90° ~ 90°

Kensington Lock Yes

Specifications 19
 Monitor G274QRFW

VESA Mounting ∙∙ Plate Type: 75 x 75 mm

∙∙ Screw Type: M4 x 10 mm
• Thread Diameter: 4 mm
• Thread Pitch: 0.7 mm
• Thread Length: 10 mm

Dimension (W x H x D) 613.49 x 532.08 x 196.48 mm

Weight 6.0 Kg (Net)

8.1 Kg (Gross)

Environment Operating ∙∙ Temperature: 0℃ to 40℃

∙∙ Humidity: 20% to 90%, non-condensing
∙∙ Altitude: 0 ~ 5000m

Storage ∙∙ Temperature: -20℃ to 60℃

∙∙ Humidity: 10% to 90%, non-condensing

* Based on CIE1976 test standards.

20 Specifications
Preset Display Modes
⚠⚠Important
All information is subject to change without prior notice.

G274QRFW
Standard Resolution
HDMI DP
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
Dos-Mode 720x480 @60Hz V V
720x576 @50Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
QHD 2560x1440 @60Hz V V
@120Hz V V
@144Hz V V
@165Hz V
@170Hz V*
Video 720P V V
Timing 1080P @60Hz V V
Resolution
@120Hz V V
2160P @30Hz V
@60Hz V
PBP Mode 1280x1440 @60Hz V V

* Users have to set DP OverClocking to ON. This is the highest refresh rate supported
by DP OverClocking. If any monitor error occurs during overclocking, please
downscale the refresh rate.

Preset Display Modes 21

 Troubleshooting
The power LED is off.
• Press the monitor power button again.
• Check if the monitor power cable is properly connected.

No image.
• Check if the computer graphics card is properly installed.
• Check if the computer and monitor are connected to electrical outlets and are
turned on.
• Check if the monitor signal cable is properly connected.
• The computer may be in Standby mode. Press any key to activate the monitor.

The screen image is not properly sized or centered.

• Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display.

No Plug & Play.

• Check if the monitor power cable is properly connected.
• Check if the monitor signal cable is properly connected.
• Check if the computer and graphics card are Plug & Play compatible.

The icons, font or screen are fuzzy, blurry or have color problems.
• Avoid using any video extension cables.
• Adjust brightness and contrast.
• Adjust RGB color or tune color temperature.
• Check if the monitor signal cable is properly connected.
• Check for bent pins on the signal cable connector.

The monitor starts flickering or shows waves.

• Change the refresh rate to match the capabilities of your monitor.
• Update your graphics card drivers.
• Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).

22 Troubleshooting
Safety Instructions
∙∙ Read the safety instructions carefully and thoroughly.
∙∙ All cautions and warnings on the device or User Guide should be noted.
∙∙ Refer servicing to qualified personnel only.

Power
∙∙ Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
∙∙ If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
∙∙ Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
∙∙ Always disconnect the power cord or switch the wall socket off if the device would
be left unused for a certain time to achieve zero energy consumption.
∙∙ Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙∙ If this device comes with an adapter, use only the MSI provided AC adapter approved
for use with this device.

Battery
Please take special precautions if this device comes with a battery.
∙∙ Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
∙∙ Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, which can result in an explosion.
∙∙ Avoid leaving a battery in an extremely high temperature or extremely low air
pressure environment that can result in an explosion or the leakage of flammable
liquid or gas.
∙∙ Do not ingest battery. If the coin/button cell battery is swallowed, it can cause
severe internal burns and can lead to death. Keep new and used batteries away
from children.

European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to
return, recycle, or treat them in compliance with the local regulations.

Taiwan:
廢電池請回收
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.

Safety Instructions 23
 California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit: https://dtsc.ca.gov/perchlorate/

Environment
∙∙ To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device on a soft, unsteady surface or obstruct its air ventilators.
∙∙ Use this device only on a hard, flat and steady surface.
∙∙ To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.
∙∙ To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙∙ Do not leave the device in an unconditioned environment with a storage temperature
above 60℃ or below -20℃, which may damage the device.
∙∙ The maximum operating temperature is around 40℃.
∙∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙∙ Always keep strong magnetic or electrical objects away from the device.
∙∙ If any of the following situations arises, get the device checked by service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the device.
• The device has been exposed to moisture.
• The device does not work well or you can not get it working according to the User
Guide.
• The device has dropped and damaged.
• The device has obvious sign of breakage.

24 Safety Instructions
TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue
and discomfort. MSI now offers monitors with TÜV
Rheinland Low Blue Light certification to ensure
users’ eye comfort and well-being. Please follow
the instructions below to reduce the symptoms from
extended exposure to the screen and blue light.
∙∙ Place the screen 20 – 28 inches (50 – 70 cm) away from your eyes and a little below
eye level.
∙∙ Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time.
∙∙ Take breaks for 20 minutes every 2 hours.
∙∙ Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks.
∙∙ Make stretches to relieve body fatigue or pain during breaks.
∙∙ Turn on the optional Low Blue Light function.

TÜV Rheinland Flicker Free Certification

∙∙ TÜV Rheinland has tested this product to
ascertain whether the display produces visible
and invisible flicker for the human eye and
therefore strains the eyes of users.
∙∙ TÜV Rheinland has defined a catalogue of
tests, which sets out minimum standards
at various frequency ranges. The test catalogue is based on internationally
applicable standards or standards common within the industry and exceeds these
requirements.
∙∙ The product has been tested in the laboratory according to these criteria.
∙∙ The keyword “Flicker Free” confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 - 3000 Hz under various
brightness settings.
∙∙ The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled.
(The availability of Anti Motion Blur/MPRT varies by products.)

TÜV Rheinland Certification 25

 Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment published under Directives of Official
Journal of the European Union.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below:
∙∙ Reorient or relocate the receiving antenna.
∙∙ Increase the separation between the equipment and receiver.
∙∙ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
∙∙ Consult the dealer or an experienced radio/television technician for help.

Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.

MSI Computer Corp.

901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com

26 Regulatory Notices
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore
and manufacturers of covered electronic equipment will be obligated to
take back such products at the end of their useful life.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://csr.msi.com/global/index

RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products offered for sale after July 1, 2006.
https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations

India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2016”
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Turkey EEE Regulation

Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine Restriction of Hazardous Substances

The equipment complies with requirements of the Technical Regulation, approved by
the Resolution of Cabinet of Ministry of Ukraine as of 10 March 2017, № 139, in terms
of restrictions for the use of certain dangerous substances in electrical and electronic
equipment.

Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of
hazardous substances in electronic and electric products.

Regulatory Notices 27
 Green Product Features
∙∙ Reduced energy consumption during use and stand-by
∙∙ Limited use of substances harmful to the environment and health
∙∙ Easily dismantled and recycled
∙∙ Reduced use of natural resources by encouraging recycling
∙∙ Extended product lifetime through easy upgrades
∙∙ Reduced solid waste production through take-back policy

Environmental Policy
∙∙ The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life.
∙∙ Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
∙∙ Visit the MSI website and locate a nearby distributor for further
recycling information.
∙∙ Users may also reach us at [email protected] for information regarding proper
disposal, take-back, recycling, and disassembly of MSI products.

Warning!
Overuse of screens is likely to affect eyesight.

Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.

Copyright and Trademarks Notice

Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.

Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please visit https://www.msi.com/support/ for further guidance.

28 Regulatory Notices