LUBRICATION SOLUTIONS FOR ROUND BA LERS

D11opsA
OIL LUBRICATIO N GREASE LUBRICATION
The oil lubrication of the agricultural machines is focused on chain and gear lubrication, where a constant and homogeneous Grease lubrication of agricultural machinery is essentially used for gears, bearings, joints or
oil film is required. Different systems can be proposed among which the most frequently used are: coupling.
• System composed by a 2 or 311 reservoir with suction filter, piston pump, manifolds and meter valves whose quantity These systems, commonly automatic, can be realized with electrical single-outlet pumps and
depends on the number of point to be lubricated, brushes or nozzles installed on the chains or the gears progressive primary and secondary dividers , or using a multi-outlet pump from which the final
• System similar to the previous one but with camshaft controlled pump installed on a roller or a shaft with an eccentric cam points can be directly reached without the installation of dividers.
• System based on a 2 or 311 reservoir with suction filter, multi-outlet PRM pump connected to a rotating shaft

MANIFOLOS WITH DOSING VALVES NP DIVIDER

The DropsA's dosing valves are ideai for machines and high speed rotating mecha­ DropsA's nano-Progressive {nP) dividers, thanks to their compact and solid
nisms where is important to maintain a continuous film of oil. Chain lubrication is design are the ideai solution for oil and grease lubrication applications that
granted using these meter units together with brushes directly installed on the require a minimum but precise dose of lubricant in reduced spaces. Through the
surfaces to be lubricated in order to have a perfect and constant distribution of the progressive movement of paired pistons with micrometrie play inside the sliding
oil film. The meter units are installed on manifolds that are proposed with outlets hole, they are able to distribute the incoming flow rate in very precise quantities
from 3 to 11 depending on system design and quantity of points to be lubricated. on the various available outlets. Thanks to a new press-fit mechanism between
the elements, Rigidlock, nano-Progressive (nP) has the rigidity of a single-block
divider but the flexibility of a modular single unit.

PISTON PUMP
The piston pump is a simple spring
pump that uses the movement of a
stem to create a depression inside a
chamber in order to suck oil and push
it toward manifolds and dosing valves [
the moment the piston is released. BRAYOPUMP
The stem usually is pushed by the The small grease pump with high
cover door of the machinery that is performance. This small pump has
opened every time a baie of hay is many innovative and high-end
finished and must be sent to the characteristics that DropsA is able to
ground. offer in order to provide new possibili•
ties in lubrication systems enginee­
ring. The new generation contro!
system is fundamental for the deve­
lopment of new solutions for the user.
lt allows the lubrication system to be
activated and controlled in no less
than five different ways

j
CAMSHAFT CONJROLLEPPVMP
The camshaft controlled pump-piston
is a good option to the piston pump for
oil system lubrication for chains or /PRMPUMP
machine mechanisms. The pump is The multioutlet PRM is a new piston pump OMEGAPUMP
installed on roller or shaft with eccen­ driven by a camshaft system that allows direct This represents a versatile solution for
tric cam that allow pump functioning lubrication of several independent lines {max 12) medium small systems that can be
by creating vacuum in the suction managing the supply of oil without the use of used to feed systems with different
chamber. dosing dividers or meter valves. lt's possible to lubrication systems: with divider (pair
adjust the flow of each pump outlet operating of pumping elements), direct to the
the pistons, a solution more intuitive and simple point (8 mini pumping elements) or
compared to the other systems where the modi­ with the release valve kit for injection
fication of the flow can be done changing one or systems.
more meter valves installed on the manifolds.
LUBRICATION SOLUTIONS FOR COMBINE HARVESTERS
D11opsA
GREASE LUBRICATION oPB+ PIYIPEB
Grease lubrication of agricultural machine is essentially used for gears, bearings, joints or coupling. These systems, commonly The nano-Progressive Replaceable dividers are the ideai solution for oil and grease
automatic, can be realized with electrical single-outlet pumps and progressive primary and secondary dividers, or using a lubrication in applications that require small and precise quantities of lubricant in a
multi-outlet pump from which the final points can be directly reached without the installation of dividers. compact and solid design. The NPR+ uses the innovative "rail & lock" concept that
allows the element to be replaced or moved without the need to completely dismant-
le the assembly. This innovation allows a single element of an assembled divider to be
modified or replaced. The compact size makes them particularly suitable for use in
reduced spaces.
SMP DIVIDER
The SMP is a single block progressive divider valve that is ideai for applications where
space is limited. lt is available in 6, 8, 10, 12 and 18 outlet versions, each with an
output of 0.2 cm'/ 0.012 cu. inch per cycle. An outlet can also be merged with the
sequential outlet on the block by removing the special outlet fitting and installing a
plug. Visual or electronic monitoring can be achieved simply by removing a plug and
installing a visual or electronic add-on device as shown below. BRAVO PUMP
Electric pump designed to work with up
to three pumping units, with or without
internal by-pass. Oesigned to work with
progressive dividers it can feed several
independent lines. By combining the
pumping outputs it's possible to double
or triple the flow. This pump is available
in two versions: manual (manageable by
external PLC) and automatic with dedica­
teci control board.

"'· !@li'�� i
AUTOMATIC OMEGA PUMP
lt's a versatile solution for medium-small applica­
tions, can be used to supply different lubrication
systems: with metering unit (pair of pumping
elements), direct to the point (8 mini pumping
units) or with the injection valve kit.
The pump, in the automatic version, can work in
stand-alone mode.

v ,!\ '
,·
l'
/
l

•
�---
(

MANUAL GREASING
POLIPUMP The nP, nPR+ or SMX dividers are also used tor manual lubrication systems. There
Small size for large grease applications. This multi-outlet pump allows the users are multiple configurations but all imply the installation of a grease nipple on the
to transform a lubrication system from manual to an automatic system in just a inlet of the master divider (if a system with master and secondary dividers is
few steps. lt can feed up to 35 points and work with direct power and with designed) on which a manual pump is connected using a flexible tube. As an
auxiliary battery. lt is easy to use and does not require specific technical knowle­ alternative, the use of manifolds with straight or 90" nipples on one side and
dge. lt is ideai for both particular on-off systems and for low cost and high yield push-in fittings with nylon tubes till the final points on the other side, can be used
complex applications. and allow manual lubrication point by point.