RAYCHEM SCREENED SEPARABLE ELBOW
CONNECTION SYSTEM RSES
FOR INTERFACE B (EN 50180/EN 50181): 400 A, UP TO 36 kV
KEY FEATURES TE Connectivity’s (TE) Raychem Screened Separable Elbow connection
system, RSES are the latest addition to our comprehensive portfolio of
• Hybrid material design:
separable connectors. TE’s RSES are designed to connect polymeric cables
Flexible silicone cable
to medium voltage gas insulated switchgears, transformers or motors which
adapter and rugged EPDM
are using bushings type “B” according to EN 50180/EN 50181 specified
body
for 400 A continuous current. The RSES connectors are compliant with
• Reliable operation even CENELEC HD 629.1 S2 02/2006+A1:2008.
under harsh environmental
The NEW Hybrid RSES combines all the benefits of EPDM’s long service
conditions
life with silicone rubber’s ease of installation characteristics for an
• Easy installation due to overall superior product solution. The durable EPDM insulation body
flexible silicone cable provides reliable performance indoors and outdoors, especially in harsh
adapter environmental conditions. Plus, its rugged, high performance capabilities
enable easy handling during push-on and connection procedures. In
• Screened connector addition, the flexible silicone stress cone adapter ensures fast and easy
body for improved safety installations even on larger cable cross sections.
and protection against
accidental contact A capacitive Voltage Detection (VD) point is built into every connector,
which detects the presence of voltage in a cable network and thus helps
• Easily accessible capacitve avoid possible injury during operation and maintenance.
test point for Voltage
Detection System (VDS)
• Shield-break design for
cable outer sheath testing
without disconnection of Customers can count on consistent, high quality products, driven by TE’s
RSES proven innovation and backed by our extraordinary customer support.
ENERGY /// RAYCHEM SCREENED SEPARABLE ELBOW CONNECTION SYSTEM RSES
Separable Elbow Connection System RSES
TE´s RSES separable connectors meet CENELEC HD 629.1 S2 requirements and pass a
100% routine test procedure including: AC Voltage Withstand and Partial Discharge Test.
215 mm
TECHNICAL DATA 125 mm
Diameter over insulation 24,5 - 39.6 mm
Conductor cross section Range 50 - 300 mm2
Maximum system voltage 36 kV
82 mm
Continuous current rating 400 A
Basic impulse level 194 kV
Partial Discharge at 2 U0 < 2 pC 270 mm max.ø90 mm*
AC Voltage Withstand (5 min) 85,5 kV
DC voltage withstand (15 min) 114 kV
Thermal short circuit (1 sec) 18 kA
*
Note:
PRODUCT SELECTION INFORMATION Plastic insulated cable
36 kV
Conductor cross section (mm2) 240 mm2
at cable rated voltage Diameter over
Product designation*
insulation (mm)
24 kV 36 kV
RSES-645A - 50 - 95 24,5 - 32
RSES-645B 120 - 240 95 - 120 24,5 - 32
RSES-645C - 150 - 240 30,8 - 39,6
RSES-645D 185 - 300 185 - 300 30,8 - 39,6
* For use with cables, other than copper wire screened cable, please contact us.
FOR MORE INFORMATION: TE Technical Support Centers
USA/Canada: +1 800-327-6996
Brazil: +55 11-2103-6023
Mexico: +52 55-1106-0800
te.com/energy South America: +57 1-319-8962
Benelux: +32 16-508-695
© 2020 TE Connectivity. All Rights Reserved. EPP-3388-DDS-6/20-RAYCHEM-ELBOW-CONNECTOR-TE
France: +33 (0) 38-058-3210
TE Connectivity, TE connectivity (logo), EVERY CONNECTION COUNTS, AMP, AMPACT, Axicom, Bowthorpe EMP, Crompton Germany/Switzerland: +49 (0) 89-608-9903
Instruments, Raychem, SIMEL, UTILUX are trademarks. Other logos, product and Company names mentioned herein may be Italy: +39 335-834-3453
trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this
brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the Middle East/Africa: +971 4-211-7020
information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained Russia: +7 495-790-790-2-200
herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, Spain/Portugal: +34 912-681-885
but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure
are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. UK: +44 08708-707-500
Consult TE for the latest dimensions and design specifications. China: +86 400-820-6015
ENERGY /// RAYCHEM SCREENED SEPARABLE ELBOW CONNECTION SYSTEM RSES
