SDRconnect_Release_Notes
SDRconnect_Release_Notes
Overview
This document provides an overview of the modifications, changes and enhancements made to the
SDRconnect Application Software.
Added
• Center frequency drag tuning
• Hardware control indicator under the frequency display
• Controls for touchscreens
Changed
• Increased max FFT rate in the web client to match the desktop client
Corrected Defects
• The duration field in timed recordings had an issue when trying to select > 60 minutes
• Manual frequency entry cancels if selecting another control
• Recording folder in preferences didn’t support UNC paths
• Adjusting the filter bandwidth in VRX caused a crash
Notes:
• The administrator app supports configuring scheduled recordings to a network share (requires
1.0.6 firmware)
• The administrator app allows you to configure the IARU region for the web client (requires 1.0.6
firmware)
Added
• Added password reset to NRSPUpdater
Changed
• Increased Wi-Fi timeout
Corrected Defects
• Fixed KeyPad not working
• Mode name changes (IQ -> Full IQ), (Audio -> Compact)
Preview 5 Update 2 build 0c0a9d6d7 (23rd November 2024)
Changed
• Incorporated an upstream fix in the UI toolkit that caused a memory leak on some platforms when
resizing the window
• Fixed a few missing scroll bars in various places
Defects
• Addressed the issue where the LO frequency was incorrectly parsed from an IQ wav file used in
IQ playback
• Fixed the antenna port selection sometimes automatically switching to the first port when setting
certain LO frequencies
Added
• Main and Aux waterfall contrast adjustment
Changed
• Updated to the latest Microsoft VC++ redistributable for Windows
Corrected Defects
• Crash and/or exception caused by preset filter parser in non-English locales
• PPM manual entry field now accepts negative values
• Frequency module missing a scrollbar around the tabs at the bottom of the panel
• Server service for Linux/ARM64 didn’t support correct use of systemctl disable/enable
• Reset layout disabled the ability to re-dock floating windows and now forces a close of
SDRconnect
• Band frame button state cleared when switching from KeyPad to Bands
Added
• Wide and narrow band noise blanker
• Noise reduction using rnnoise from xiph.org
• Save/Load application layout *
• PPM correction support and calibration routine using SAM mode
• Spectrum peak detection and measurement
• Support for configurable audio AGC profiles
• 3.125 kHz step size
• Store step size in profiles
• CB band for US
* Note: on some platforms/OS distributions there are issues with floating docked windows including
resizing, repositioning and being the incorrect size/position when the application is started. This is related
to the latest version of the UI kit. The layout can be reset using the reset button in the Preferences menu.
Changed
• Improvements to the installer for Linux/ARM64 platform
Corrected Defects
Added
• RDS decoder – supports both USA and rest of the world standards. Adds selected station name
into the spectrum view.
• Profiles – save and recall custom radio profiles.
• Timed recordings.
• USB surprise removal support in the client.
• Network disconnection support in the client.
• Installer option to setup SDRconnect as a server service for Linux/ARM64 platform.
• Step sizes added: 2.5 kHz and 7.5 kHz
Changed
• All platforms now moved to .NET 8 and latest versions of the UI/docking kit.
• Power measurement text moved to save space.
• Play button disabled whilst the device list is being refreshed.
Corrected Defects
Corrected Defects
• Changing sample rate did not always complete successfully during band framing.
Changed
• Frequency module behaviour with cut/copy & paste and selection.
Corrected Defects
• Mac (x64 and ARM64) – crashes on exit due to issues with the json output.
• Some of the text either clipped by a bounding box or edge of a panel.
• VRXs not receiving changes from the main receiver.
Added
• RSPdxR2 Support.
• Tabulated frequency module to store and manage frequencies.
• Audio recording pre-roll buffering with up to 10 seconds history.
• MPX view for WFM signals.
• Spectrum peak hold with decay added to the Audio SP view.
• Recording settings are now saved.
Changed
• Layout has been adjusted to make it look better on smaller screen resolutions.
• Several updates to both the spectrum and waterfall displays to improve the overall look and feel.
Corrected Defects
• RSPduo - in dual tuner mode, starting the stream would sometimes cause a crash.
• RSPduo – in dual tuner mode, changing the sample rate on the Primary tuner caused the
spectrum to stop until the stream was stopped/started or the sample rate was changed on the
Secondary tuner.
• Tuning the centre frequency past the 2 GHz upper limit using the scroll wheel.
Corrected Defects
• Mac x64 only – FFT size of 64k causes a crash
• Mac only – opening Global Settings from the system menu causes a crash
• Bandwidth limits incorrect for network audio source
• Server attempted to stream WAV file when no USB device found
• Issue with biquad filter when adjusting bandwidth in AM or SAM mode to 100 Hz
Corrected Defects
• 40m band not showing the correct frequency span for regions 1 and 3.
• IQ file dropdown does not prompt for a file when it’s the only source available.
• Notch filter could be removed when adjusting the asymmetric filter.
Changed
• Linux installer: checks for 64bit OS and additional info on how to approve the license terms
• Rename CB band to CB-HF
• Popups now have transparency
• Zero the waterfall average slider default position
• Changes required to the Mac build profile due to changes in .NET 8 (now makes it harder to
support older OS versions)
• Modify data exchange for FFT data for improved performance
Corrected Defects
• Audio gain range insufficient
• Hit marker on frequency digits not working as intended due to control having zero height
• Random graphical artefacts and glitches on windows
• GUI freezing
• Initial application startup size on "small resolutions"
• Fix NOAA band frequency range and mode
• Broadcast band buttons making the control too wide
• Fix marine band frequency range and mode
• Frequency scrolling in SSB mode not working
• IFAGC always starts enabled regardless of UI setting
• Device settings not applied properly when switching sources
• Spectrum axis is too small
• Fix spectrum flickering when resizing the application window
• Waterfall palette not applying correctly on startup
• Server sometimes crashing on new client connections when max client limit reached
• Reset zoom to 0% when band framing to avoid the chance of displaying out of bounds bins
Legal Information
SDRPlay modules use a Mirics chipset and software. The information supplied hereunder is provided to you by SDRPlay under
license from Mirics. Mirics hereby grants you a perpetual, worldwide, royalty free license to use the information herein for the
purpose of designing software that utilizes SDRPlay modules, under the following conditions:
There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated
circuits based on the information in this document. Mirics reserves the right to make changes without further notice to any of its
products. Mirics makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does Mirics assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and
all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Mirics data
sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters must be validated for each customer application by the buyer’s technical experts. SDRPlay and Mirics products are not
designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the Mirics product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SDRPlay or Mirics products for any such unintended or
unauthorized application, Buyer shall indemnify and hold both SDRPlay and Mirics and their officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that either SDRPlay or Mirics were negligent regarding the design or manufacture of the part. Mirics FlexiRF™, Mirics
FlexiTV™ and Mirics™ are trademarks of Mirics .
SDRPlay is the trading name of SDRPlay Limited a company registered in England # 09035244.
Mirics is the trading name of Mirics Limited a company registered in England # 05046393