Quick Installation Guide
Applicable Models
FS6706T / FS6712X
Ver. 4.2.0307(2023-3-7)
Ver.2.3.0903 (2015-3-2)
Table of Contents
Notices ..................................................................................................................................................... 3
Safety Precautions ................................................................................................................................... 4
1. Package Contents ................................................................................................................................ 5
2. Optional Accessories ........................................................................................................................... 6
3. Hardware Installation Guide ............................................................................................................... 7
Tools Required for M.2 SSD Installation .............................................................................................. 7
Installing M.2 SSDs ............................................................................................................................... 7
Securing the Power Cord .................................................................................................................... 11
Connecting and Powering on the NAS ............................................................................................... 12
Upgrading System Memory................................................................................................................ 13
4. Software Installation Guide ............................................................................................................... 17
Download Center Installation ............................................................................................................ 17
Web Installation ................................................................................................................................. 19
Installation Using a Mobile Device ..................................................................................................... 20
5. Appendix ............................................................................................................................................ 23
LED Indicators ..................................................................................................................................... 23
Rear Panel........................................................................................................................................... 24
(Optional Step) Installing M.2 SSD Heatsinks (Sold Separately) ........................................................ 25
Shutting Down Your NAS .................................................................................................................... 26
Troubleshooting ................................................................................................................................. 27
2
Notices
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the
Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
CE Mark Warning
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC "Electromagnetic
compatibility" and IEC60950-1:2005 (2nd Edition)+A1:2009 "Information technology equipment-Safety ".”
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface,
HDMI trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and
other countries.
3
Safety Precautions
The following safety precautions will increase the life of the NAS. Follow all precautions and instructions.
Electrical Safety
Unplug this product from the power source before cleaning.
Use only the bundled power adapter. Using other power adapters may damage your device.
Ensure that you plug the power adapter to the correct power input rating. Check the label on the power adapter for the
power rating.
Operation Safety
DO NOT place this product in a location where it may get wet.
Place this product on a flat and stable surface.
Use this product in environments with an ambient temperature between 0°C and 40°C.
DO NOT block the air vents on the case of this product. Always provide proper ventilation for this product.
DO NOT insert any object or spill liquid into the air vents. If you encounter technical problems with this product,
contact a qualified service technician or your retailer. DO NOT attempt to repair this product yourself.
DO NOT throw this product in municipal waste.
This product has been designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product (electrical and
electronic equipment) should not be placed in municipal waste. Check local regulations
for disposal of electronic products.
4
1. Package Contents
Applicable Models : FS6706T, FS6712X
FS6706T FS6712X
Model Name
x1 x1
Power Cord
x1 x1
Adapter
x2 x1
RJ45 Network Cable
x1 x1
Power Cord Tie
x1 x1
Quick Installation Guide
5
2. Optional Accessories
The items below may be purchased from the ASUSTOR Accessories Store http://shop.asustor.com.
6
3. Hardware Installation Guide
All data stored on installed M.2 SSDs will be deleted and cannot be recovered when initializing your NAS or creating a
volume. Before initializing, ensure data on M.2 SSDs is first backed up.
Tools Required for M.2 SSD Installation
Phillips head screwdriver
At least one 2280 NVMe M.2 SSD. For a list of compatible M.2 SSDs, click here.
Installing M.2 SSDs
Installing SSDs in Slots 1-6 – FS6706T and FS6712X
1. Installed M.2 slots SSDs are numbered sequentially.
2. Use a Phillips screwdriver to remove the screws on the bottom cover.
7
3. Slide the cover away from the NAS and lift upon release.
4. Align M-key M.2 SSD with the M-key notch of the slot and insert at a 45° angle.
5. Once inserted, push the SSD down so that it is flush with the motherboard while pushing SSD locking lever open to
secure the SSD. Once SSD is fully flush, release lever to secure SSD. If heatsinks are needed, they should be installed
now.
8
6. Return cover back to its original position by sliding it towards the NAS.
7. Use a Phillips screwdriver to restore screws.
Installing SSDs into Slots 7-12 – FS6712X Only
1. M.2 slots for NVMe SSDs are numbered sequentially from 1 to 12 as shown below. These instructions
9
2. Use a Phillips screwdriver to remove the screws of the top cover.
3. Please remove the cover in the direction of the arrow.
4. Align M-key M.2 SSD with the M-key notch of the slot and insert at a 45° angle.
5. Once inserted, push the SSD down so that it is flush with the motherboard while pushing SSD locking lever open to
secure the SSD. Once SSD is fully flush, release lever to secure SSD. If heatsinks are needed, they should be installed
now.
10
6. Return cover back to its original position by sliding it towards the NAS.
7. Use a Phillips screwdriver to tighten the screws for the top cover.
Securing the Power Cord
Note: You can use the provided cord bracket to secure the power cord in place, if you are concerned about the NAS
power cord becoming detached when the NAS is moved.
1. Take the cord bracket out of the accessories box.
2. Insert the power cord cable tie into the cable tie socket.
11
3. Fasten cable tie onto AC adapter cord.
4. Tighten buckle in the direction of the arrow.
Connecting and Powering on the NAS
1. Connect the NAS to its power supply.
2. Connect the NAS to your router, switch or hub using an Ethernet cable.
3. Press the power button on the right.
4. When the blue power indicator light is on, it means that the NAS is powered on. When booting up, the green system
indicator light will flash and the network indicator light will be on if connected to a network. The green system indicator
light will stop flashing when the NAS has successfully booted up. Please refer to the light indicator table in the appendix
for more information.
12
Upgrading System Memory
Notes and Precautions
All FS67 Series NAS devices support up to 16GB of memory. Before adding or removing memory modules, please read the
following precautions thoroughly.
• Your NAS and memory modules use high precision components and electronic connector technology. To avoid
invalidation of the warranty during your product warranty period, we recommend that:
✓ Memory for FS67 series devices may be purchased from local dealers or the online ASUSTOR Accessories Store
(http://shop.asustor.com).
✓ You should not install a memory module by yourself, if you are not familiar with upgrading memory on a
computer.
✓ You should not touch the connectors or open the memory module compartment cover.
• Addition or removal of memory modules by yourself may result in an accident or malfunction of your NAS caused by
breakage of the slot and module or a connection mistake. In this case, a repair fee will be charged.
• Be careful not to injure your hands or fingers with sharp edges of the memory module, inner components, or circuit
boards of your NAS.
• ASUSTOR does not guarantee that third party memory modules will work in your NAS.
• Be sure to turn off your NAS and peripherals and disconnect all attachments and connection cables before adding or
removing memory modules.
• To prevent damage from electrostatic discharge to memory modules, follow the instructions below:
✓ Do not work at a location that produces static electricity easily, such as on a carpet.
✓ Before adding or removing memory modules, touch an external metal object other than your NAS to ground
yourself and eliminate static electricity. Do not touch any metal parts inside the NAS.
• Do not insert a memory module into the slot facing in the wrong direction. It may cause damage to the module or slot,
or cause the circuit board to catch fire.
• Use a screwdriver that matches the size of the screws.
• Do not remove or loosen screws that are not specified to be removed.
Parts and Tools Needed
Phillips head screwdriver
13
Removing the Cover
1. Shutdown the NAS by selecting [Shut down] from the ADM User Menu.
2. Disconnect all cables and devices connected to the NAS including the power cord.
FS6706T FS6712X
14
3. Use a screwdriver to loosen the three screws found on the rear of the NAS as shown in the illustration.
FS6706T FS6712X
4. Grip the cover from both sides with two hands and then gently push it back to remove it from the chassis.
Installing Memory
1. Upon opening the NAS, RAM slots can be found on the motherboard on the left hand side of the NAS. Insert a DIMM
into an empty slot at a 45° angle and align the notches of the RAM and the slot.
15
2. Gently push the DIMM down until both latches click into place. RAM should be flush with the motherboard.
Replacing the Cover
1. Replace the cover and tighten the three screws that were removed previously.
FS6706T FS6712X
2. Reconnect all cables including the power cord and then start up the NAS.
FS6706T FS6712X
16
4. Software Installation Guide
There are 3 different installation methods that you can choose from. You can go to the download section of the ASUSTOR
website (http://www.asustor.com/service/downloads) to download the latest software.
Download Center Installation
Windows Users
1. After ASUSTOR Control Center has been installed, it will automatically begin to scan your network for ASUSTOR NAS
devices.
17
2. Select your NAS from the list and follow the installation wizard’s instructions to complete the configuration process.
Mac Users
1. After ASUSTOR Control Center has been installed, it will automatically begin to scan your network for ASUSTOR NAS
devices.
18
2. Select your NAS from the list and follow the installation wizard’s instructions to complete the configuration process.
Web Installation
1. If you already know your NAS’s current IP address, you can open up a web browser and enter in your NAS’s IP
address (for example: http://192.168.1.168:8000) to begin initialization.
2. Please follow the instructions from the installation wizard to complete the configuration process.
19
Installation Using a Mobile Device
1. Search for “AiMaster” in Google Play or the Apple App Store. You can also scan the QR codes provided below.
Download and install the AiMaster mobile app to your mobile device.
2. Make sure that your mobile device is connected to the same local network that your NAS is connected to.
3. Next, open AiMaster and then select the icon from the toolbar at the top of the screen.
20
4. Select [Auto Discovery]. AiMaster will now scan the local network for your NAS.
5. Select your NAS from the list that appears.
21
6. Select [Start Initialization] to begin installation. Follow the prompts and instructions to complete the configuration
process.
22
5. Appendix
LED Indicators
FS6706T / FS6712X
Power LED Indicator System Status LED Indicator Network LED Indicator
Hard Disk LED
Indicator
LED
Color Description State
Indicator
Steadily lit Power on
Blue
Flashing Waking from sleep mode (S3)
Power
Steadily lit Sleep mode (S3) 1
Orange
Flashes every 10
LED night mode
seconds
System Flashing Powering on
Status Green
Steadily lit System ready
FS6706T: 1G/100M Network port connected
Blue Steadily lit
Network FS6712X: 5G/2.5G/1G/100M Network port connected
FS6706T: 2.5G Network port connected
purple Steadily lit
FS6712X: 10G Network port connected
23
Steadily lit Hard disk ready
Green Flashing Data access in progress
Hard Disk
Flashes every 10
Hibernation mode
seconds
Red Steadily lit Hard disk abnormality
1 The F6712X does not support S3 sleep.
Rear Panel
FS6706T
K-Lock HDMI Port DC Input
S/PDIF USB 3.2 Gen 2 Port
USB 2.0 Ports Power cord cable tie socket
2.5G RJ45 Ports Reset Button
24
FS6712X
K-Lock HDMI Port DC Input
S/PDIF USB 3.2 Gen 2 Port
USB 2.0 Ports Power cord cable tie socket
10G RJ45 Port Reset Button
(Optional Step) Installing M.2 SSD Heatsinks (Sold Separately)
The items below may be purchased from the ASUSTOR Accessories Store http://shop.asustor.com.
1. After installing M.2 drives, remove protective film from heatsink and align the M.2 heatsink with the screw holes on
the motherboard and fasten the screws.
FS6706T FS6712X
25
2. Up to three heatsinks can be installed per side.
FS6706T FS6712X
Shutting Down Your NAS
1. Confirm the function settings for the power button as shown in the graphic below. When the power button is held
down for 1.5 seconds you can decide whether to shut down the NAS or have it entered into sleep mode. This setting
may be access from within ADM by selecting: [Settings]→[Hardware] → [Power] → [Settings].
2. Hold down the power button for 1.5 seconds. You should be able to hear a “beep” from the system buzzer. Let go of
the power button and the NAS will either shut down or enter sleep mode depending on your configuration.
26
Troubleshooting
Q: Why can’t I detect my ASUSTOR NAS using ASUSTOR Control Center?
A: If you are having trouble detecting your NAS using ASUSTOR Control Center, please do the following:
1. Please check your network connection:
Make sure that your computer and your NAS are part of the same local area network.
Check to see if the network LED indicator is lit. If you find that it is not lit, try connecting your Ethernet cable to the
other network port or try using a different Ethernet cable.
2. Please first disable any firewalls that may be running on your computer. Then try scanning for your NAS again using
ASUSTOR Control Center.
3. If you still cannot detect your NAS, please connect your NAS to your computer using the provided RJ-45 network cable
and change your computer’s IP settings.
Select [Start] [Control Panel] [Network and Sharing Center]
27
Click on [Change adapter settings] in the left hand panel.
Right-click on [Local Area Connection] and select [Properties].
28
Under the [Networking] tab select [Internet Protocol Version 4 (TCP/IPv4)] and click on [Properties].
Under the [General] tab select the [Use the following IP address] radio button. Set the [IP address] to 169.254.1.10
and the [Subnet mask] to 255.255.0.0 and then click on [OK].
29
Open up ASUSTOR Control Center to scan for your NAS.
4. If the above mentioned procedures have not managed to solve your problem, please contact your local ASUSTOR dealer
or ASUSTOR Customer Service. You are also encouraged to browse through the ASUSTOR Knowledgebase.
30
