NMAM INSTITUTE OF TECHNOLOGY, NITTE
(An Autonomous Institution affiliated to VTU, Belagavi)
MODEL QUESTION PAPER
21EC702 – E-VEHICLES
Sl. Unit – I
No.
1. With a neat block diagram, explain the function of each block in the Electric Vehicle
system.
2. Explain the following with respect to EV and HEV components,
(i) system design fundamentals,
(ii) primary hardware components, and
(iii) primary energy conversion devices.
3. With a neat block diagram, explain the vehicle architecture and design of Electric
Vehicles.
4. What are the classifications of Hybrid Vehicles based on the,
(i) architecture,
(ii) transmission assembly,
(iii) degree of hybridisation and
(iv) storage device charges.
5. With a neat block diagram, explain the function of each block in the Hybrid Electric
Vehicle powertrain system.
6. With a neat diagram, explain the Electric motor & IC engine torque characteristics.
Also, write the equation for the relationship between power and torque.
7. Explain the Series–parallel 2×2 Hybrid Electric Vehicle architecture with a neat block
diagram.
8. With a neat block diagram, explain the series Plug-in Hybrid Electric Vehicle system.
9. With a neat block diagram, explain the Mechanical Power Transmission Path (MPTP).
10. With a neat block diagram, explain the Electrical Power Transmission Path (EPTP).
11. Explain the following HEV architectures,
(i) P0 architecture with belt-starter generator,
(ii) P1 architecture ISG.
12. With a neat Block diagram explain the function of each block in a Battery Electric
Vehicle System
13. With neat diagram explain the operation of Series HEV. Also list its advantages and
disadvantages
14. With a neat Block diagram explain the function of each block in a Plug-in Hybrid
Electric Vehicle System
15. With neat diagrams explain Pre-transmission and Post-Transmission Hybrid
architectures.
16. Explain the Power transmission path in
a) Conventional ICE vehicle
NMAM INSTITUTE OF TECHNOLOGY, NITTE
(An Autonomous Institution affiliated to VTU, Belagavi)
MODEL QUESTION PAPER
21EC702 – E-VEHICLES
b) Battery Electric Vehicle
17. With neat diagram explain the operation of Parallel HEV. Also list its advantages and
disadvantages
18. Write the block diagram of EV. Explain the power transmission in a Conventional IC
Engine and Electric Vehicle with a block diagram.
19. With a block diagram, Explain the HEV Power Train and Electrical components of HEV.
20. Explain the Electric motor and IC engine torque characteristics. Explain the Power
Torque relationship and express in Horse power also.
21. Explain what is Well to Wheel Analysis give detailed description and also explain the
process involved in WTW efficiency calculation.
22. Explain the Electric Vehicle Architecture with a neat block diagram. What is Series
Hybrid Power Train? Explain the advantages.
23. Explain Series –Parallel Combination HEV and also explain the Series parallel 2x2
vehicle Architecture.
Unit – II
24. Explain the following types of batteries,
(i) primary battery
(ii) secondary battery.
25. Explain the following battery parameters,
(i) battery capacity
(ii) open-circuit voltage.
26. With a neat block diagram, explain the battery-management system's main algorithm
control loop.
27. With a neat block diagram, explain the model-based state estimation approach.
28.
29. Explain the major types of rechargeable batteries used in electric and hybrid vehicle
applications.
30. Outline the taxonomy of cell-balancing circuits.
31. With a neat diagram, explain the shared-bus balancing topology used under non-
dissipative cell balancing.
32.
33. With a neat cell circuit symbol and cross-sectional diagram, explain the components of
a battery cell.
34. Explain the primary purposes of a battery-management system used in the vehicle.
35. Explain the functional requirements of the battery-management system.
NMAM INSTITUTE OF TECHNOLOGY, NITTE
(An Autonomous Institution affiliated to VTU, Belagavi)
MODEL QUESTION PAPER
21EC702 – E-VEHICLES
36. With the circuit symbol and cross-section, explain the components of a battery cell.
37. What is a BMS? Explain its design requirements
38. Explain the major types of rechargeable batteries used in
electric and hybrid vehicle applications.
39. What is State of Charge? Explain Various approaches to estimate SOC
40. Write short notes on
a) Battery Capacity
b) Open Circuit Voltage
c) State of Discharge
41. What is Cell Balancing? Explain in brief the various generic architectures that may be
used in a cell-balancing system
42. Explain the following Parameters with necessary equations
(a)Battery Capacity
(b)Practical battery Capacity
(c) Depth Of Discharge
(d)Specific Energy
(e)Battery Energy
43. Explain the Basic Battery Model with a Circuit diagram.
44. Explain the 4 Traction batteries in detail.
45. Explain the Run-Time Battery Model with a Circuit Diagram.
46. With a context of BMS inside a Battery Pack, Explain the BMS functional requirements.
47. Explain the Battery Management System main algorithm Control loop with a neat
diagram.
Unit – III
48. What are the functionalities of a V2H microgrid framework?
49. With a neat diagram, explain the charging station concept with AC coupling.
50. With a neat circuit diagram, explain the power electronics converter capable of V2H
and H2V modes of operation.
51. With a neat circuit diagram, explain the power electronic converters in an EV/PHEV
electric powertrain.
52. With a neat diagram, explain the following power stages in three-phase DC fast
chargers,
(i) using a diode front end,
(ii) using an active front end.
53. With a neat diagram, explain the single-phase non-interleaved DC-DC half-bridge
boost converter.
NMAM INSTITUTE OF TECHNOLOGY, NITTE
(An Autonomous Institution affiliated to VTU, Belagavi)
MODEL QUESTION PAPER
21EC702 – E-VEHICLES
54. With a neat diagram, explain the powertrain non-boosted traction inverter.
55. With neat block diagram explain Power electronic converters in an EV/PHEV electric
powertrain
56. With a neat diagram, explain the charging station concept with AC coupling.
57. Discuss the importance of Vehicle Grid Interface
58. With a neat diagram, explain the charging station concept with DC coupling.
59. Explain G2V, V2G, V2V and V2H frame work in detail.
60. Explain Power stages in 480V DC fast charger using diode front end and active front
end.
61. Explain the Power electronic converters in an EV/PHEV electric power train.
62. Explain DC Single phase non-interleaved half bridge boost converter.
