Scribd
Upload
7 views3 pages

Simulate The QPSK Transmitter and Receiver 1

Uploaded by

manoj.marigoudar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7 views3 pages

Simulate The QPSK Transmitter and Receiver 1

Uploaded by

manoj.marigoudar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Simulate the QPSK transmitter and receiver. Plot the signals and its constellation diagram.

clear all;

close all;

%GENERATE QUADRATURE CARRIER SIGNAL

Tb=1;

t=0:(Tb/100):Tb;

fc=1;

c1=sqrt(2/Tb)*cos(2*pi*fc*t);

c2=sqrt(2/Tb)*sin(2*pi*fc*t);

%generate message signal

N=8;m=rand(1,N);

t1=0;t2=Tb;

for i=1:2:(N-1)

t=[t1:(Tb/100):t2];

if m(i)>0.5

m(i)=1;

m_s=ones(1,length(t));

else

m(i)=0;

m_s=-1*ones(1,length(t));

end

%odd bits modulated signal

odd_sig(i,:)=c1.*m_s;

if m(i+1)>0.5

m(i+1)=1;

m_s=ones(1,length(t));

else

m(i+1)=0;

m_s=-1*ones(1,length(t));
end

%even bits modulated signal

even_sig(i,:)=c2.*m_s;

%qpsk signal

qpsk=odd_sig+even_sig;

%Plot the QPSK modulated signal

subplot(3,2,4);plot(t,qpsk(i,:));

title('QPSK signal');xlabel('t---->');ylabel('s(t)');grid on; hold on;

t1=t1+(Tb+.01); t2=t2+(Tb+.01);

end

hold off

%Plot the binary data bits and carrier signal

subplot(3,2,1);stem(m);

title('binary data bits');xlabel('n---->');ylabel('b(n)');grid on;

subplot(3,2,2);plot(t,c1);

title('carrier signal-1');xlabel('t---->');ylabel('c1(t)');grid on;

subplot(3,2,3);plot(t,c2);

title('carrier signal-2');xlabel('t---->');ylabel('c2(t)');grid on;

t1=0;t2=Tb;

for i=1:N-1

t=[t1:(Tb/100):t2];

%correlator

x1=sum(c1.*qpsk(i,:));

x2=sum(c2.*qpsk(i,:));

%decision device

if (x1>0&&x2>0)

demod(i)=1;

demod(i+1)=1;

elseif (x1>0&&x2<0)

demod(i)=1;

demod(i+1)=0;
elseif (x1<0&&x2<0)

demod(i)=0;

demod(i+1)=0;

elseif (x1<0&&x2>0)

demod(i)=0;

demod(i+1)=1;

end

t1=t1+(Tb+.01); t2=t2+(Tb+.01);

end

subplot(3,2,5);stem(demod);

title('qpsk demodulated bits');xlabel('n---->');ylabel('b(n)');grid on;

You might also like