Product information

DIGIMIC DCen MkII

DIGIMIC Central Control Unit with 32 audio channels
Article no.: 05.0055

Description
The DCen control unit powers all connected delegate units Dante™: Easy connection to additional DCens as well as third-
within the DIGIMIC microphone and interpretation system, party audio devices
configuring them automatically and routing digital audio exactly In addition, the DCen has a Dante audio interface for connection
where you need it. to further DIGIMIC DCen control consoles or to third-party digital
DCen includes all common microphone modes, including audio systems.
automatic, push to talk and request to speak, voting (with CMic The Dante audio interface provides all 32 translation channels in
consoles), chairperson priority and VIP management. high quality and is thus perfectly adapted to the needs of a multi-
In addition, DCen manages and controls DDol type interpreter channel simultaneous interpreting system. The routing and
consoles. distribution of the interpreted languages greatly reduces
installation effort.
The new DCen provides four RJ45 sockets for connecting up to
100 delegate units. Each output is supplied with voltage from its With its Dante interface, DCen32 integrates easily with
own power supply unit. In the event of a short circuit or failure of Audinate's Digital Media Networking solution. With the
one line, the other outputs continue to operate undisturbed. integrated 4-port network switch, up to 4 DCens can be
DDol interpreter consoles can also be operated directly from the connected via Dante without additional hardware. Alternatively,
DCen, providing a complete microphone and interpreter system the 4 ports can be set to provide a secondary or primary
for up to 32 languages with just one central unit. As soon as a network, and it also works with hundreds of third-party devices
device is connected to the central unit, it is immediately ready for digital audio processing and connectivity.
for use without any further settings. The free DCen Config
configuration tool is available for customizing the DCen.
Via the Ethernet interface, the DCen is integrated into the
comprehensive conference software brählerOS to realize
microphone control, name management, access control and
voting easily via touch screen or PC.

For easy connection to other devices, the DCen is equipped with

one analog input and 5 analog outputs. For quick and easy
installation, these balanced connections are designed as Phoenix
terminals. An internally controllable audio matrix allows various
microphone and translation signals to be freely routed to the
outputs. Each chain of microphone consoles is available as a
separate audio signal.

BRÄHLER Systems GmbH +49 2244 8414 4 [email protected]

Auf der Alten Burg 6 www.braehler-systems.com
53639 Königswinter
Germany
05.0055 230105 V1.1 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
 Product information
Technical Data Features
Digital Audio  4 independent power supplies - one for each line output.
 48 kHz sample rate Thus, multiple redundancy in case of failure of one power
 20 – 20,000 Hz frequency response supply, because the central unit and the other units continue
 Approx. 1 ms latency time to run undisturbed.
 HOT SWAP functionality. When a faulty delegate or
Audio device interfaces interpreter unit is replaced, the new unit is automatically
configured correctly. Replacement units therefore do not
 One analog input (IN) balanced, Phoenix terminal block
need to be separately preconfigured.
 Five analog outputs: 1 master +4 x OUT, signals configurable
 Dante™ multi-channel network audio
via audio matrix, connection: Phoenix terminal block
 4 green LEDs for indicating the operating voltage at the
line outputs
Dante™ Interface  4 red LEDs for indication of voltage failures
Configurable Ethernet switch for 4 Dante ports  4 yellow LEDs to indicate the audio level
 Configurable via Dante controller as primary/secondary or as  Info LED for operation display
4-port switch  LAN LED for network activity
 Link-Speed: 1 GBps  8 x 32 audio matrix allows sophisticated sound
 Sample Rate: 48 kBps/24 bit reinforcement support and audio distribution
 Number of DANTE input channels: 48 (32 languages + 16  Line outputs protected against short circuit and overload
input channels (floor mix))  Expandable up to 1000 delegate units
 Number of output channels: 64 (32 languages + 32
configurable channels) Microphone Modes
 AUTomatic – each participant switches itself on/off,
Controls optionally with or without limitation of active microphones
Network connection (TCP/IP) for control by brählerOS software,  AUTomatic – NEXT/FLOAT - Each participant switches itself
MicControl software, media control on/off with FIFO function
 MANual – Manual operation with request-to-speak list
Connection of DIGIMIC units  PRIOrity – Priority function for chairmen, optionally via
 UNITS L1 ... L4 (RJ45 socket) microphone button or separate priority button
 Min. 25 delegate units on each of the four line outputs  VOX – Automatic activation when speaking
depending on cable length
 Extension of line outputs by means of DExt additional Simultaneous interpretation
power supply unit  Connection of DDol interpreter consoles for translations with
up to 32 channels
Other connections
 USB-A for power supply of external additional devices Power Supply
 Mains power: (90 ... 240) AC voltage, (50 ... 60) Hz
 Power consumption: 480 W max.

BRÄHLER Systems GmbH +49 2244 8414 4 [email protected]

Auf der Alten Burg 6 www.braehler-systems.com
53639 Königswinter
Germany
05.0055 230105 V1.1 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.