TI01687F/00/EN/02.

23-00 Products Solutions Services

71597497
2023-02-20

Technical Information
Micropilot FMR67B
HART
Free space radar

Level measurement in bulk solids

Application
• Continuous, non-contact level measurement of powdered to granular bulk solids
• Process connections: Flanges with purge air and alignment unit
• Maximum measuring range: 125 m (410 ft)
• Temperature: –40 to +450 °C (–40 to +842 °F)
• Pressure: –1 to +160 bar (–14.5 to +2 321 psi)
• Accuracy: ±3 mm (±0.12 in)

Your benefits
• PTFE lens antenna or ceramic sealed high-temperature horn antenna
• Reliable measurement thanks to strong signal focusing, even with multiple
internal fixtures
• Easy, guided commissioning with intuitive user interface
• Bluetooth®wireless technology for commissioning, operation and maintenance
• SIL2 as per IEC 61508, SIL3 for homogeneous redundancy
 Micropilot FMR67B HART

Table of contents

Important document information . . . . . . . . . . . . . . . 4 Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Process pressure range . . . . . . . . . . . . . . . . . . . . . . . . . 34
Graphic conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Dielectric constant . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Function and system design . . . . . . . . . . . . . . . . . . . 5 Mechanical construction . . . . . . . . . . . . . . . . . . . . 35

Measuring principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Measured variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Measuring range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Operating frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Operating concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Transmission power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Local operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Local display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System integration . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Signal on alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Supported operating tools . . . . . . . . . . . . . . . . . . . . . . 60
Linearization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Protocol-specific data . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Certificates and approvals . . . . . . . . . . . . . . . . . . . 60
Wireless HART data . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CE mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
RCM marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ex approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Terminal assignment . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Functional safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Pressure equipment with allowable pressure ≤
Available device plugs . . . . . . . . . . . . . . . . . . . . . . . . . 11
200 bar (2 900 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Radio approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Potential equalization . . . . . . . . . . . . . . . . . . . . . . . . . 12
EN 302729 radio standard . . . . . . . . . . . . . . . . . . . . . . 61
Cable entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
EN 302372 radio standard . . . . . . . . . . . . . . . . . . . . . . 61
Cable specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Overvoltage protection . . . . . . . . . . . . . . . . . . . . . . . . . 13
Industry Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Other standards and guidelines . . . . . . . . . . . . . . . . . . . 62
Performance characteristics . . . . . . . . . . . . . . . . . . 14
Reference operating conditions . . . . . . . . . . . . . . . . . . . 14
Ordering information . . . . . . . . . . . . . . . . . . . . . . . 63
Maximum measured error . . . . . . . . . . . . . . . . . . . . . . . 14
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Measured value resolution . . . . . . . . . . . . . . . . . . . . . . 15
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Response time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Test, certificate, declaration . . . . . . . . . . . . . . . . . . . . . . 64
Influence of ambient temperature . . . . . . . . . . . . . . . . . 15
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Application packages . . . . . . . . . . . . . . . . . . . . . . . 64
Mounting location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Heartbeat Technology . . . . . . . . . . . . . . . . . . . . . . . . . 64
Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . 18
Beam angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Special mounting instructions . . . . . . . . . . . . . . . . . . . . 23 Weather protection cover 316L . . . . . . . . . . . . . . . . . . . 65
Plastic weather protection cover . . . . . . . . . . . . . . . . . . . 66
Adjustable flange seal . . . . . . . . . . . . . . . . . . . . . . . . . 66
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
M12 socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Ambient temperature range . . . . . . . . . . . . . . . . . . . . . 24
Remote display FHX50B . . . . . . . . . . . . . . . . . . . . . . . . 70
Ambient temperature limits . . . . . . . . . . . . . . . . . . . . . 24
Commubox FXA195 HART . . . . . . . . . . . . . . . . . . . . . . 71
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 33
HART Loop Converter HMX50 . . . . . . . . . . . . . . . . . . . . 72
Climate class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
FieldPort SWA50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Installation height as per IEC61010-1 Ed.3 . . . . . . . . . . . 33
Wireless HART adapter SWA70 . . . . . . . . . . . . . . . . . . . 72
Degree of protection . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fieldgate FXA42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Vibration resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Field Xpert SMT70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Electromagnetic compatibility (EMC) . . . . . . . . . . . . . . . 34
DeviceCare SFE100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
FieldCare SFE500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Memograph M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

2 Endress+Hauser
Micropilot FMR67B HART

RN42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Document function . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Registered trademarks . . . . . . . . . . . . . . . . . . . . . . 73

Endress+Hauser 3
 Micropilot FMR67B HART

Important document information

Symbols Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or
fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or
fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor or
medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not result in personal
injury.

Electrical symbols

Direct current

Alternating current

Direct current and alternating current

Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

Protective earth (PE)

Ground terminals that must be connected to ground prior to establishing any other connections.
The ground terminals are located on the inside and outside of the device.
• Inner ground terminal; protective earth is connected to the mains supply.
• Outer ground terminal; device is connected to the plant grounding system.

Symbols for certain types of information and graphics

Permitted
Procedures, processes or actions that are permitted
Preferred
Procedures, processes or actions that are preferred
Forbidden
Procedures, processes or actions that are forbidden
Tip
Indicates additional information

Reference to documentation

Reference to graphic
1, 2, 3, ...
Item numbers
A, B, C, ...
Views
- Hazardous area
Indicates the hazardous area
. Safe area (non-hazardous area)
Indicates the non-hazardous area

4 Endress+Hauser
Micropilot FMR67B HART

Graphic conventions • Installation, explosion and electrical connection drawings are presented in simplified format
• Devices, assemblies, components and dimensional drawings are presented in reduced-line
format
• Dimensional drawings are not to-scale representations; the dimensions indicated are
rounded off to 2 decimal places
• Unless otherwise described, flanges are presented with sealing surface form EN1091-1, B2;
ASME B16.5, RF; JIS B2220, RF

Function and system design

Measuring principle The Micropilot is a "downward-looking" measuring system, operating based on the frequency
modulated continuous wave method (FMCW). The antenna emits an electromagnetic wave at a
continuously varying frequency. This wave is reflected by the product and received again by the
antenna.

A0032017

1 FMCW principle: transmission and reflection of the continuous wave

R Reference point of measurement
D Distance between reference point and product surface

The frequency of this wave is modulated in the form of a sawtooth signal between two limit
frequencies f1 and f2:

f
1
2
f2

∆f
∆t

f1
t
A0023771

2 FMCW principle: result of frequency modulation

1 Transmitted signal
2 Received signal

This results in the following difference frequency at any time between the transmitted signal and the
received signal:

∆f = k ∆t

where ∆t is the run time and k is the specified increase in frequency modulation.
∆t is given by the distance D between the reference point R and the product surface:

Endress+Hauser 5
 Micropilot FMR67B HART

D = (c ∆t) / 2

where c is the speed of propagation of the wave.

In summary, D can be calculated from the measured difference frequency Δf. D is then used to
determine the content of the tank or silo.

Input
Measured variable The measured variable is the distance between the reference point and the product surface. The level
is calculated based on "E", the empty distance entered.

Measuring range The start of the measuring range is the point where the beam hits the floor. Levels below this point
cannot be measured, particularly in the case of conical outlets. An alignment unit can be used to
increase the maximum measuring range in such applications.

Maximum measuring range

The maximum measuring range depends on the antenna size and design.

Antenna Maximum measuring range

Horn, 316L, 65 mm (2.6 in) 125 m (410 ft)

Drip-off, PTFE, 50 mm (2 in) 50 m (164 ft)

Flush mount, PTFE, 80 mm (3 in) 125 m (410 ft)

Usable measuring range

The usable measuring range depends on the antenna size, the medium's reflective properties, the
installation position and any possible interference reflections.
In principle, measurement is possible up to the tip of the antenna.
Depending on the position of the product (angle of repose) and to avoid any material damage from
abrasive media and deposit buildup on the antenna, the end of the measuring range should be
selected 10 mm (0.4 in) before the tip of the antenna.

6 Endress+Hauser
Micropilot FMR67B HART

A
100%

H
B
0%

A0051659

A Length of antenna + 10 mm (0.4 in)

B Usable measuring range
H Silo height
R Reference point of measurement, varies depending on the antenna system (see mechanical construction)

For the dielectric constants (DC values) of many media commonly used in industry, please refer
to:
• Dielectric constant (DC value) Compendium CP01076F
• The Endress+Hauser "DC Values app" (available for Android and iOS)

Operating frequency Approx. 80 GHz

Up to 8 devices can be installed in a tank without the devices mutually influencing one another.

Transmission power • Peak power: 6.3 mW

• Average output power: 63 µW

Output
Output signal HART
Signal coding:
FSK ±0.5 mA over current signal
Data transmission rate:
1 200 Bit/s
Galvanic isolation:
Yes

Current output
4 to 20 mA with superimposed digital communication protocol HART, 2-wire
The current output offers a choice of three different operating modes:
• 4.0 to 20.5 mA
• NAMUR NE 43: 3.8 to 20.5 mA (factory setting)
• US mode: 3.9 to 20.8 mA

Endress+Hauser 7
 Micropilot FMR67B HART

Signal on alarm Current output

Failure mode (according to NAMUR Recommendation NE 43):
• Minimum alarm (= factory setting): 3.6 mA
• Maximum alarm: 22 mA
Local display
Status signal (according to NAMUR Recommendation NE 107):
Plain text display
Operating tool via service interface (CDI)
Status signal (according to NAMUR Recommendation NE 107):
Plain text display
Operating tool via HART communication
Status signal (according to NAMUR Recommendation NE 107):
Plain text display

Linearization The linearization function of the device allows the conversion of the measured value into any unit of
length, weight, flow or volume.
Pre-programmed linearization curves
Linearization tables for calculating the volume in the following vessels are preprogrammed into the
device:
• Pyramid bottom
• Conical bottom
• Angled bottom
• Horizontal cylinder
• Sphere
Other linearization tables of up to 32 value pairs can be entered manually.

Load 4 to 20 mA HART

R L max
[W ]
1065
848

3 R L max £ U – 10.5 V
23 mA

10.5 30 35 U
[V]
1
2
A0039232

1 Power supply 10.5 to 30 VDC Ex i

2 Power supply 10.5 to 35 VDC, for other types of protection and non-certified device versions
3 RLmax maximum load resistance
U Supply voltage

Operation via handheld terminal or PC with operating program: take minimum communication
resistor of 250 Ω into consideration.

Protocol-specific data HART

Manufacturer ID:
17 (0x11{hex})
Device type ID:
0x11C1
Device revision:
1

8 Endress+Hauser
Micropilot FMR67B HART

HART specification:
7
DD version:
1
Device description files (DTM, DD)
Information and files under:
• www.endress.com
On the product page for the device: Documents/Software → Device drivers
• www.fieldcommgroup.org
HART load:
Min. 250 Ω

HART device variables

The following measured values are assigned to the device variables at the factory:

Device variable Measured value

1)
Assign PV Level linearized

Assign SV Distance

Assign TV Absolute echo amplitude

Assign QV Relative echo amplitude

1) The PV is always applied to the current output.

Choice of HART device variables

• Level linearized
• Distance
• Terminal voltage
• Electronics temperature
• Sensor temperature
• Absolute echo amplitude
• Relative echo amplitude
• Area of incoupling
• Build-up index
• Build-up detected
• Foam index
• Foam detected
• Percent of range
• Loop current
• Terminal current
• Not used

Supported functions
• Burst mode
• Additional transmitter status
• Device locking

Wireless HART data Minimum start-up voltage:

10.5 V
Start-up current:
< 3.6 mA
Starting time:
< 15 s
Minimum operating voltage:
10.5 V
Multidrop current:
4 mA
Time to establish connection:
< 30 s

Endress+Hauser 9
 Micropilot FMR67B HART

Power supply
Terminal assignment Single compartment housing

3
-
2
1 +

A0042594

3 Connection terminals and ground terminal in the connection compartment

1 Positive terminal
2 Negative terminal
3 Internal ground terminal

Dual compartment housing

- +

3 2 1
A0042803

4 Connection terminals and ground terminal in the connection compartment

1 Positive terminal
2 Negative terminal
3 Internal ground terminal

10 Endress+Hauser
Micropilot FMR67B HART

Dual compartment housing, L-form

- +

3 2 1
A0045842

5 Connection terminals and ground terminal in the connection compartment

1 Positive terminal
2 Negative terminal
3 Internal ground terminal

Terminals • Supply voltage and internal ground terminal: 0.5 to 2.5 mm2 (20 to 14 AWG)
• External ground terminal: 0.5 to 4 mm2 (20 to 12 AWG)

Available device plugs In the case of devices with a plug, it is not necessary to open the housing for connection
purposes.
Use the enclosed seals to prevent the penetration of moisture into the device.

Devices with M12 plug

4 3

1 2

A0011175

6 View of the plug-in connection on the device

1 Signal +
2 Not assigned
3 Signal –
4 Ground

Various M12 sockets are available as accessories for devices with M12 plugs.

Endress+Hauser 11
 Micropilot FMR67B HART

Measuring devices with Harting plug Han7D

A B – +

+ – 8 7 6
1
2 5
3 4
Han7D

+ –
A0041011

A Electrical connection for devices with Harting plug Han7D

B View of the plug-in connection on the device
- Brown
 Green/yellow
+ Blue

Material
CuZn, gold-plated plug-in jack and plug contacts

Supply voltage The supply voltage depends on the selected type of device approval

Non-hazardous, Ex d, Ex e 10.5 to 35 VDC

Ex i 10.5 to 30 VDC

Nominal current 4 to 20 mA

The power unit must be tested to ensure it meets safety requirements (e.g., PELV, SELV, Class
2) and complies with the relevant protocol specifications.
A suitable circuit breaker must be provided for the device in accordance with IEC/EN61010-1

Potential equalization The protective ground on the device must not be connected. If necessary, the potential matching line
can be connected to the outer ground terminal of the transmitter before the device is connected.

A B C D E

1 1 1 1 1
A0046583

A Single compartment housing, plastic

B Single compartment housing, aluminum
C Single compartment housing, 316L hygiene (Ex device)
D Dual compartment housing
E Dual compartment housing, L-form
1 Ground terminal for connecting the potential matching line

12 Endress+Hauser
Micropilot FMR67B HART

LWARNING
Explosion Hazard!
‣ Please refer to the separate documentation on applications in hazardous areas for the safety
instructions.

For optimum electromagnetic compatibility:

• Keep the potential matching line as short as possible
• Observe a cross-section of at least 2.5 mm2 (14 AWG)

Cable entries
A B C D E
1 1 1 1 1

2 2 2 2 2
A0046584

A Single compartment housing, plastic

B Single compartment housing, aluminum
C Single compartment housing, 316L hygiene
D Dual compartment housing
E Dual compartment housing, L-form
1 Cable entry
2 Dummy plug

The type of cable entry depends on the device version ordered.

Always route connecting cables downwards so that moisture cannot penetrate the connection
compartment.
If necessary, create a drip loop or use a weather protection cover.

Cable specification Rated cross-section

• Supply voltage
0.5 to 2.5 mm2 (20 to 13 AWG)
• Protective earth or grounding of the cable shield
> 1 mm2 (17 AWG)
• External ground terminal
0.5 to 4 mm2 (20 to 12 AWG)
Cable outer diameter
The cable outer diameter depends on the cable gland used
• Coupling, plastic:
⌀5 to 10 mm (0.2 to 0.38 in)
• Coupling, nickel-plated brass:
⌀7 to 10.5 mm (0.28 to 0.41 in)
• Coupling, stainless steel:
⌀7 to 12 mm (0.28 to 0.47 in)

Overvoltage protection The overvoltage protection can optionally be ordered as a "Mounted accessory" via the product
structure

Devices without optional overvoltage protection

The equipment fulfills the requirements of the product standard IEC / DIN EN 61326-1 (Table 2
Industrial Environment).
Depending on the type of port (DC power supply, input/output port) different testing levels according
to IEC / DIN EN 61326-1 against transient overvoltages (Surge) are applied (IEC / DIN EN
61000-4-5 Surge):
Test level on DC power ports and input/output ports is 1 000 V line to earth

Endress+Hauser 13
 Micropilot FMR67B HART

Devices with optional overvoltage protection

• Spark-over voltage: min. 400 VDC
• Tested according to IEC / DIN EN 60079-14 sub chapter 12.3 (IEC / DIN EN 60060-1 chapter 7)
• Nominal discharge current: 10 kA

NOTICE
Device could be destroyed
‣ Always ground device with integrated overvoltage protection.
Overvoltage category
Overvoltage category II

Performance characteristics
Reference operating • Temperature = +24 °C (+75 °F) ±5 °C (±9 °F)
conditions • Pressure = 960 mbar abs. (14 psia) ±100 mbar (±1.45 psi)
• Humidity = 60 % ±15 %
• Reflector: metal plate with diameter ≥ 1 m (40 in)
• No major interference reflections inside the signal beam

Maximum measured error Reference accuracy

The devices are optimized for bulk solid applications on delivery. Additional reference condition for
the accuracy specifications for solids devices is Bin type= Workbench test.
Accuracy
The accuracy is the sum of the non-linearity, non-repeatability and hysteresis.
• Measuring distance up to 1.5 m (4.92 ft): max. ±20 mm (±0.79 in)
• Measuring distance > 1.5 m (4.92 ft): ±3 mm (±0.12 in)
Non-repeatability
Non-repeatability is already included in the accuracy.
≤ 1 mm (0.04 in)
If conditions deviate from the reference operating conditions, the offset/zero point that results
from the installation conditions can be up to ±4 mm (±0.16 in). This additional offset/zero
point can be eliminated by entering a correction (Level correction parameter) during
commissioning.

14 Endress+Hauser
Micropilot FMR67B HART

Differing values in near-range applications

∆ [mm (in)]
20 (0.79)

3 (0.12)
0
-3 (-0.12)

-20 (-0.79)

R 1.5 (4.92) D [m (!)]

A0032637

7 Maximum measured error in near-range applications

Δ Maximum measured error
R Reference point of the distance measurement
D Distance from reference point of antenna

Measured value resolution Dead band according to DIN EN IEC 61298-2 / DIN EN IEC 60770-1:
• Digital: 1 mm
• Analog: 1 µA

Response time According to DIN EN IEC 61298-2 / DIN EN IEC 60770-1 , the step response time is the time
following an abrupt change in the input signal up until the changed output signal has adopted 90 %
of the steady-state value for the first time.
The response time can be configured.
The following step response times apply (in accordance with DIN EN IEC 61298-2 / DIN EN IEC
60770-1) when damping is switched off:
• Pulse frequency ≥ 5/s (cycle time ≤ 200 ms)
at U= 10.5 to 35 V, I= 4 to 20 mA and Tamb= –50 to +80 °C (–58 to +176 °F)
• Step response time < 1 s

Influence of ambient The output changes due to the effect of the ambient temperature with respect to the reference
temperature temperature.
The measurements are performed according to DIN EN IEC 61298-3 / DIN EN IEC 60770-1
Digital output (HART)
Average TC = 3 mm/10 K
Analog (current output)
• Zero point (4 mA): average TC = 0.02 %/10 K
• Span (20 mA): average TC = 0.05 %/10 K

Endress+Hauser 15
 Micropilot FMR67B HART

Mounting
Mounting location
1 2 3

A0016883

A Recommended distance from wall to nozzle outer edge ~ 1/6 of the vessel diameter. The device should never
be mounted closer than 20 cm (7.87 in) to the vessel wall.
1 Use of a weather protection cover; protection from direct sunlight or rain
2 Installation in the center, interference can cause signal loss
3 Do not install above the filling curtain

In applications with strong dust emissions, the integrated purge air connection can prevent the
antenna from becoming clogged.

16 Endress+Hauser
Micropilot FMR67B HART

Orientation Internal vessel fittings

A0031814

Avoid internal fittings (point level switches, temperature sensors, struts, vacuum rings, heating coils,
baffles etc.) inside the signal beam. Pay attention to the beam angle α.

Avoiding interference echoes

A0031817

Endress+Hauser 17
 Micropilot FMR67B HART

Metal deflector plates, installed at an angle to scatter the radar signals, help prevent interference
echoes.

Vertical alignment of antenna axis

Align the antenna so that it is perpendicular to the product surface.
The maximum reach of the antenna can be reduced, or additional interference signals can
occur, if the antenna is not installed perpendicular to the product.

Radial alignment of the antenna

Based on the directional characteristic, radial alignment of the antenna is not necessary.

Installation instructions Horn antenna 65 mm (2.56 in)

Information about the mounting nozzle

The maximum nozzle length Hmax depends on the nozzle diameter D.

Maximum nozzle length Hmax as a function of the nozzle diameter D

D Hmax

80 to 100 mm (3.2 to 4 in) 1 700 mm (67 in)

100 to 150 mm (4 to 6 in) 2 100 mm (83 in)

≥ 150 mm (6 in) 3 200 mm (126 in)

H max

øD

In the case of longer nozzles, reduced measuring performance must be expected.

Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles that are
higher than indicated in the table.

Horn antenna 65 mm (2.56 in) with alignment unit

UNI flanges with an integrated alignment unit are available for the horn antenna 65 mm (2.56 in).
An angle of inclination of up to 15 ° in all directions can be set for the antenna axis using the
alignment unit. The alignment unit is used to optimally align the measuring signal to the bulk solids.

A0048891

8 Horn antenna with alignment unit

18 Endress+Hauser
Micropilot FMR67B HART

Information about the mounting nozzle

The maximum nozzle length Hmax depends on the nozzle diameter D.

The maximum nozzle length Hmax depends on the nozzle diameter D

D Hmax

80 to 100 mm (3.2 to 4 in) 1 700 mm (67 in)

100 to 150 mm (4 to 6 in) 2 100 mm (83 in)

≥ 150 mm (6 in) 3 200 mm (126 in)

H max
øD

In the case of longer nozzles, reduced measuring performance must be expected.

Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles that are
higher than indicated in the table.

PTFE Drip-off antenna 50 mm (2 in)

Information about the mounting nozzle

The maximum nozzle length Hmax depends on the nozzle diameter D.

Maximum nozzle length Hmax as a function of the nozzle diameter D

D Hmax

50 to 80 mm (2 to 3.2 in) 750 mm (30 in)

80 to 100 mm (3.2 to 4 in) 1 150 mm (46 in)

100 to 150 mm (4 to 6 in) 1 450 mm (58 in)

H max

≥150 mm (6 in) 2 200 mm (88 in)

øD

In the case of longer nozzles, reduced measuring performance must be expected.

Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles that are
higher than indicated in the table.

Antenna, flush mount 80 mm (3 in)

Information about the mounting nozzle

The maximum nozzle length Hmax depends on the nozzle diameter D.

Endress+Hauser 19
 Micropilot FMR67B HART

Antenna nozzle mounting, flush mount 80 mm (3 in)

ØD Hmax

80 to 100 mm (3.2 to 4 in) 1 750 mm (70 in)

100 to 150 mm (4 to 6 in) 2 200 mm (88 in)

H max
≥ 150 mm (6 in) 3 300 mm (132 in)

øD

In the case of longer nozzles, reduced measuring performance must be expected.

Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles that are
higher than indicated in the table.

Antenna flush mount 80 mm (3 in) with alignment unit

UNI flanges with an integrated alignment unit are available for the antenna flush mount
80 mm (3 in). An inclination of the antenna axis of up to 15 ° in all directions can be set with the
help of the alignment unit. The alignment unit is used to optimally align the measuring signal to the
bulk solids.

A0046592

9 Antenna flush mount with alignment unit

Information about the mounting nozzle

The maximum nozzle length Hmax depends on the nozzle diameter D.

20 Endress+Hauser
Micropilot FMR67B HART

The maximum length of the nozzle Hmax depends on the nozzle diameter D

D Hmax

min. 80 to 100 mm (3 to 4 in) 1 450 mm (57 in)

100 to 150 mm (4 to 6 in) 1 800 mm (71 in)

H max
≥ 150 mm (6 in) 2 700 mm (106 in)

øD

In the case of longer nozzles, reduced measuring performance must be expected.

Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles that are
higher than indicated in the table.

Purge air connection

In applications with strong dust emissions, the integrated purge air connection can prevent the
antenna from becoming clogged. Pulse operation is recommended.

1 1 1

A0046593

 10 Antenna with purge air adapter

1 Purge air connection NPT 1/4" or G 1/4"

Purge air pressure range

• Pulse operation :
Max. 6 bar (87 psi)
• Continuous operation:
200 to 500 mbar (3 to 7.25 psi)
Purge air connection
• Tool:
• Open-ended wrench 13 mm (G 1/4")
• Open-ended wrench 14 mm (NPT)
• Open-ended wrench 17 mm (NPT "adapter")
• Min. torque: 6 Nm (4.4 lbf ft)
• Max. torque: 7 Nm
• Always use dry purge air
• In general, purging should only be performed to the extent necessary as excess purging can
cause mechanical damage (abrasion)

Beam angle The beam angle is defined as the angle α where the energy density of the radar waves reaches half
the value of the maximum energy density (3 dB width). Microwaves are also emitted outside the
signal beam and can be reflected off interfering installations.

Endress+Hauser 21
 Micropilot FMR67B HART

α
W= 2 . D . tan_
2

D
α

W
A0031824

 11 Relationship between beam angle α, distance D and beamwidth diameter W

The beamwidth diameter W depends on the beam angle α and the distance D.

Horn antenna 65 mm (2.56 in), α 4 °

W = D × 0.07 D W

5 m (16 ft) 0.35 m (1.15 ft)

10 m (33 ft) 0.70 m (2.30 ft)

15 m (49 ft) 1.05 m (3.45 ft)

20 m (66 ft) 1.40 m (4.59 ft)

25 m (82 ft) 1.75 m (5.74 ft)

30 m (98 ft) 2.10 m (6.89 ft)

35 m (115 ft) 2.45 m (8.04 ft)

D

40 m (131 ft) 2.80 m (9.19 ft)

α 45 m (148 ft) 3.15 m (10.33 ft)
W 50 m (164 ft) 3.50 m (11.48 ft)

80 m (262 ft) 5.60 m (18.37 ft)

100 m (328 ft) 7.00 m (23.00 ft)

125 m (410 ft) 8.75 m (28.71 ft)

Drip-off, PTFE 50 mm (2 in) antenna, α = 6 °

W = D × 0.10 D W

5 m (16 ft) 0.52 m (1.70 ft)

10 m (33 ft) 1.04 m (3.41 ft)

15 m (49 ft) 1.56 m (5.12 ft)

20 m (66 ft) 2.08 m (6.82 ft)

25 m (82 ft) 2.60 m (8.53 ft)

D

30 m (98 ft) 3.12 m (10.24 ft)

35 m (115 ft) 3.64 m (11.94 ft)

α
40 m (131 ft) 4.16 m (13.65 ft)
W
45 m (148 ft) 4.68 m (15.35 ft)

50 m (164 ft) 5.20 m (17.06 ft)

22 Endress+Hauser
Micropilot FMR67B HART

PTFE, flush mount 80 mm (3 in) antenna, α 3 °

W = D × 0.05 D W

5 m (16 ft) 0.25 m (0.82 ft)

10 m (33 ft) 0.50 m (1.64 ft)

15 m (49 ft) 0.75 m (2.46 ft)

20 m (66 ft) 1.00 m (3.28 ft)

25 m (82 ft) 1.25 m (4.10 ft)

30 m (98 ft) 1.50 m (4.92 ft)

35 m (115 ft) 1.75 m (5.74 ft)

40 m (131 ft) 2.00 m (6.56 ft)

D

45 m (148 ft) 2.25 m (7.38 ft)

α 50 m (164 ft) 2.50 m (8.20 ft)
W 60 m (197 ft) 3.00 m (9.84 ft)

70 m (230 ft) 3.50 m (11.48 ft)

80 m (262 ft) 4.00 m (13.12 ft)

100 m (328 ft) 5.00 m (16.40 ft)

125 m (410 ft) 6.25 m (20.51 ft)

Special mounting External measurement through plastic cover or dielectric windows

instructions
• Dielectric constant of medium: εr ≥ 10
• The distance from the tip of the antenna to the tank should be approx. 100 mm (4 in).
• Avoid installation positions where condensate or buildup can form between the antenna and the
vessel
• In the case of outdoor installations, ensure that the area between the antenna and the tank is
protected from the weather
• Do not install any fittings or attachments between the antenna and the tank that could reflect the
signal
The thickness of the tank ceiling or the dielectric window depends on the εr of the material.
The material thickness can be a full multiple of the optimum thickness (table); it is important to
note, however, that the microwave transparency decreases significantly with increasing material
thickness.

Optimum material thickness

Material Optimum material thickness

PE; εr 2.3 1.25 mm (0.049 in)

PTFE; εr 2.1 1.30 mm (0.051 in)

PP; εr 2.3 1.25 mm (0.049 in)

Perspex; εr 3.1 1.10 mm (0.043 in)

Endress+Hauser 23
 Micropilot FMR67B HART

Container with heat insulation

A0046566

If process temperatures are high, the device should be included in the usual container insulation
system (2) to prevent the electronics from heating as a result of thermal radiation or convection. The
rib structure (1) must not be insulated.

Environment
Ambient temperature range The following values apply up to a process temperature of +85 °C (+185 °F). At higher process
temperatures, the permitted ambient temperature is reduced.
• Without LCD display:
• Standard: –40 to +85 °C (–40 to +185 °F)
• Optionally available: –50 to +85 °C (–58 to +185 °F) with restricted operating life and
performance
• Optionally available: –60 to +85 °C (–76 to +185 °F) with restricted operating life and
performance; below –50 °C (–58 °F): devices can be damaged permanently
• With LCD display: –40 to +85 °C (–40 to +185 °F) with limitations in optical properties such as
display speed and contrast. Can be used without limitations up to –20 to +60 °C (–4 to +140 °F)
If operating outdoors in strong sunlight:
• Mount the device in the shade.
• Avoid direct sunlight, particularly in warm climatic regions.
• Use a weather protection cover (see accessories).

Ambient temperature limits The permitted ambient temperature (Ta) depends on the selected housing material (Product
Configurator → Housing; Material →) and the selected process temperature range (Product
Configurator → Application →).

In the event of temperature (Tp) at the process connection, the permitted ambient temperature (Ta)
is reduced.
The following information only takes functional aspects into consideration. Additional
restrictions may apply for certified device versions.

24 Endress+Hauser
Micropilot FMR67B HART

Plastic housing

Plastic housing; process temperature –40 to +80 °C (–40 to +176 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 12 Plastic housing; process temperature –40 to +80 °C (–40 to +176 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +80 °C (+176 °F) | Ta: +75 °C (+167 °F)
P4 = Tp: +80 °C (+176 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

In the case of devices with a plastic housing and CSA C/US approval, the selected process
temperature of
–40 to +80 °C (–40 to +176 °F) is limited to 0 to +80 °C (+32 to +176 °F).

Restriction to a process temperature of 0 to +80 °C (+32 to +176 °F) with CSA C/US approval and
plastic housing

Ta
P1 P2

P3
P5 P4
Tp
A0048826

 13 Plastic housing; process temperature 0 to +80 °C (+32 to +176 °F) with CSA C/US approval
P1 = Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +80 °C (+176 °F) | Ta: +75 °C (+167 °F)
P4 = Tp: +80 °C (+176 °F) | Ta: 0 °C (+32 °F)
P5 = Tp: 0 °C (+32 °F) | Ta: 0 °C (+32 °F)

Plastic housing; process temperature –40 to +150 °C (–40 to +302 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 14 Plastic housing; process temperature –40 to +150 °C (–40 to +302 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +150 °C (+302 °F) | Ta: +25 °C (+77 °F)
P4 = Tp: +150 °C (+302 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

In the case of devices with a plastic housing and CSA C/US approval, the selected process
temperature of –40 to +150 °C (–40 to +302 °F) is limited to 0 to +150 °C (+32 to +302 °F).

Endress+Hauser 25
 Micropilot FMR67B HART

Restriction to a process temperature of 0 to +150 °C (+32 to +302 °F) with CSA C/US approval and
plastic housing

Ta
P1 P2

P3
P5 P4
Tp
A0048826

 15 Plastic housing; process temperature 0 to +150 °C (+32 to +302 °F) with CSA C/US approval
P1 = Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +150 °C (+302 °F) | Ta: +25 °C (+77 °F)
P4 = Tp: +150 °C (+302 °F) | Ta: 0 °C (+32 °F)
P5 = Tp: 0 °C (+32 °F) | Ta: 0 °C (+32 °F)

Plastic housing; process temperature –40 to +200 °C (–40 to +392 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 16 Plastic housing; process temperature –40 to +200 °C (–40 to +392 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +200 °C (+392 °F) | Ta: +27 °C (+81 °F)
P4 = Tp: +200 °C (+392 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

In the case of devices with a plastic housing and CSA C/US approval, the selected process
temperature of –40 to +200 °C (–40 to +392 °F) is limited to 0 to +200 °C (+32 to +392 °F).

Restriction to a process temperature of 0 to +200 °C (+32 to +392 °F) with CSA C/US approval and
plastic housing

Ta
P1 P2

P3
P5 P4
Tp
A0048826

 17 Plastic housing; process temperature 0 to +200 °C (+32 to +392 °F) with CSA C/US approval
P1 = Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +200 °C (+392 °F) | Ta: +27 °C (+81 °F)
P4 = Tp: +200 °C (+392 °F) | Ta: 0 °C (+32 °F)
P5 = Tp: 0 °C (+32 °F) | Ta: 0 °C (+32 °F)

26 Endress+Hauser
Micropilot FMR67B HART

Plastic housing; process temperature –40 to +280 °C (–40 to +536 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 18 Plastic housing; process temperature –40 to +280 °C (–40 to +536 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +280 °C (+536 °F) | Ta: +48 °C (+118 °F)
P4 = Tp: +280 °C (+536 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

In the case of devices with a plastic housing and CSA C/US approval, the selected process
temperature of –40 to +280 °C (–40 to +536 °F) is limited to 0 to +280 °C (+32 to +536 °F).

Restriction to a process temperature of 0 to +280 °C (+32 to +536 °F) with CSA C/US approval and
plastic housing

Ta
P1 P2

P3
P5 P4
Tp
A0048826

 19 Plastic housing; process temperature 0 to +280 °C (+32 to +536 °F) with CSA C/US approval
P1 = Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +280 °C (+536 °F) | Ta: +48 °C (+118 °F)
P4 = Tp: +280 °C (+536 °F) | Ta: 0 °C (+32 °F)
P5 = Tp: 0 °C (+32 °F) | Ta: 0 °C (+32 °F)

Plastic housing; process temperature –40 to +450 °C (–40 to +842 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 20 Plastic housing; process temperature –40 to +450 °C (–40 to +842 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +450 °C (+842 °F) | Ta: +20 °C (+68 °F)
P4 = Tp: +450 °C (+842 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

In the case of devices with a plastic housing and CSA C/US approval, the selected process
temperature of –40 to +450 °C (–40 to +842 °F) is limited to 0 to +450 °C (+32 to +842 °F).

Endress+Hauser 27
 Micropilot FMR67B HART

Restriction to a process temperature of 0 to +450 °C (+32 to +842 °F) with CSA C/US approval and
plastic housing

Ta
P1 P2

P3
P5 P4
Tp
A0048826

 21 Plastic housing; process temperature 0 to +450 °C (+32 to +842 °F) with CSA C/US approval
P1 = Tp: 0 °C (+32 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +450 °C (+842 °F) | Ta: +20 °C (+68 °F)
P4 = Tp: +450 °C (+842 °F) | Ta: 0 °C (+32 °F)
P5 = Tp: 0 °C (+32 °F) | Ta: 0 °C (+32 °F)

Aluminum housing, coated

Aluminum housing; process temperature –40 to +80 °C (–40 to +176 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 22 Aluminum housing, coated; process temperature –40 to +80 °C (–40 to +176 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F)
P2 = Tp: +79 °C (+174 °F) | Ta: +79 °C (+174 °F)
P3 = Tp: +80 °C (+176 °F) | Ta: +79 °C (+174 °F)
P4 = Tp: +80 °C (+176 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Aluminum housing; process temperature –40 to +150 °C (–40 to +302 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 23 Aluminum housing, coated; process temperature –40 to +150 °C (–40 to +302 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F)
P2 = Tp: +79 °C (+174 °F) | Ta: +79 °C (+174 °F)
P3 = Tp: +150 °C (+302 °F) | Ta: +53 °C (+127 °F)
P4 = Tp: +150 °C (+302 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

28 Endress+Hauser
Micropilot FMR67B HART

Aluminum housing; process temperature –40 to +200 °C (–40 to +392 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 24 Aluminum housing, coated; process temperature –40 to +200 °C (–40 to +392 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F)
P2 = Tp: +79 °C (+174 °F) | Ta: +79 °C (+174 °F)
P3 = Tp: +200 °C (+392 °F) | Ta: +47 °C (+117 °F)
P4 = Tp: +200 °C (+392 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Aluminum housing; process temperature –40 to +280 °C (–40 to +536 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 25 Aluminum housing, coated; process temperature –40 to +280 °C (–40 to +536 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F)
P2 = Tp: +79 °C (+174 °F) | Ta: +79 °C (+174 °F)
P3 = Tp: +280 °C (+536 °F) | Ta: +59 °C (+138 °F)
P4 = Tp: +280 °C (+536 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Aluminum housing; process temperature –40 to +450 °C (–40 to +842 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 26 Aluminum housing, coated; process temperature –40 to +450 °C (–40 to +842 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +79 °C (+174 °F)
P2 = Tp: +79 °C (+174 °F) | Ta: +79 °C (+174 °F)
P3 = Tp: +450 °C (+842 °F) | Ta: +39 °C (+102 °F)
P4 = Tp: +450 °C (+842 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Endress+Hauser 29
 Micropilot FMR67B HART

316L housing

316L housing; process temperature –40 to +80 °C (–40 to +176 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 27 316L housing; process temperature –40 to +80 °C (–40 to +176 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +77 °C (+171 °F)
P2 = Tp: +77 °C (+171 °F) | Ta: +77 °C (+171 °F)
P3 = Tp: +80 °C (+176 °F) | Ta: +77 °C (+171 °F)
P4 = Tp: +80 °C (+176 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing; process temperature –40 to +150 °C (–40 to +302 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 28 316L housing; process temperature range: –40 to +150 °C (–40 to +302 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +77 °C (+171 °F)
P2 = Tp: +77 °C (+171 °F) | Ta: +77 °C (+171 °F)
P3 = Tp: +150 °C (+302 °F) | Ta: +43 °C (+109 °F)
P4 = Tp: +150 °C (+302 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing; process temperature –40 to +200 °C (–40 to +392 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 29 316L housing; process temperature –40 to +200 °C (–40 to +392 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +77 °C (+171 °F)
P2 = Tp: +77 °C (+171 °F) | Ta: +77 °C (+171 °F)
P3 = Tp: +200 °C (+392 °F) | Ta: +38 °C (+100 °F)
P4 = Tp: +200 °C (+392 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

30 Endress+Hauser
Micropilot FMR67B HART

316L housing; process temperature –40 to +280 °C (–40 to +536 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 30 316L housing; process temperature –40 to +280 °C (–40 to +536 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +77 °C (+171 °F)
P2 = Tp: +77 °C (+171 °F) | Ta: +77 °C (+171 °F)
P3 = Tp: +280 °C (+536 °F) | Ta: +54 °C (+129 °F)
P4 = Tp: +280 °C (+536 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing; process temperature –40 to +450 °C (–40 to +842 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 31 316L housing; process temperature –40 to +450 °C (–40 to +842 °F)

P1 = Tp: –40 °C (–40 °F) | Ta: +77 °C (+171 °F)
P2 = Tp: +77 °C (+171 °F) | Ta: +77 °C (+171 °F)
P3 = Tp: +450 °C (+842 °F) | Ta: +31 °C (+88 °F)
P4 = Tp: +450 °C (+842 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing, hygiene

316L housing, hygiene; process temperature –40 to +80 °C (–40 to +176 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 32 316L housing, hygiene; process temperature –40 to +80 °C (–40 to +176 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +80 °C (+176 °F) | Ta: +75 °C (+167 °F)
P4 = Tp: +80 °C (+176 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Endress+Hauser 31
 Micropilot FMR67B HART

316L housing, hygiene; process temperature –40 to +150 °C (–40 to +302 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 33 316L housing, hygiene; process temperature range: –40 to +150 °C (–40 to +302 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +150 °C (+302 °F) | Ta: +41 °C (+106 °F)
P4 = Tp: +150 °C (+302 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing, hygiene; process temperature –40 to +200 °C (–40 to +392 °F)

Ta
P1 P2

P3

Tp
P5 P4
A0032024

 34 316L housing, hygiene; process temperature –40 to +200 °C (–40 to +392 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +200 °C (+392 °F) | Ta: +32 °C (+90 °F)
P4 = Tp: +200 °C (+392 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

316L housing, hygiene; process temperature –40 to +280 °C (–40 to +536 °F)

 - Not specified !!!!!!!!!!!! Exclusion-based relationship (one option excludes the other) !!!!!!!!!!
Ta
P1 P2

P3

Tp
P5 P4
A0032024

 35 316L housing, hygiene; process temperature –40 to +280 °C (–40 to +536 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +280 °C (+536 °F) | Ta: +54 °C (+129 °F)
P4 = Tp: +280 °C (+536 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

32 Endress+Hauser
Micropilot FMR67B HART

316L housing, hygiene; process temperature –40 to +450 °C (–40 to +842 °F)

 - Not specified !!!!!!!!!!!! Exclusion-based relationship (one option excludes the other) !!!!!!!!!!
Ta
P1 P2

P3

Tp
P5 P4
A0032024

 36 316L housing, hygiene; process temperature –40 to +450 °C (–40 to +842 °F)
P1 = Tp: –40 °C (–40 °F) | Ta: +76 °C (+169 °F)
P2 = Tp: +76 °C (+169 °F) | Ta: +76 °C (+169 °F)
P3 = Tp: +450 °C (+842 °F) | Ta: +31 °C (+88 °F)
P4 = Tp: +450 °C (+842 °F) | Ta: –40 °C (–40 °F)
P5 = Tp: –40 °C (–40 °F) | Ta: –40 °C (–40 °F)

Storage temperature • Without LCD display: –40 to +90 °C (–40 to +194 °F)
• With LCD display: –40 to +85 °C (–40 to +185 °F)

Climate class DIN EN 60068-2-38 (test Z/AD)

Installation height as per • Generally up to 2 000 m (6 600 ft) above sea level
IEC61010-1 Ed.3 • Over 2 000 m (6 600 ft) under the following conditions:
• Supply voltage < 35 VDC
• Power supply, overvoltage category 1

Degree of protection Test as per IEC 60529 and NEMA 250-2014

Housing
IP66/68, NEMA TYPE 4X/6P
IP68 test condition: 1.83 m under water for 24 hours.

Cable entries
• Gland M20, plastic, IP66/68 NEMA TYPE 4X/6P
• Gland M20, nickel-plated brass, IP66/68 NEMA TYPE 4X/6P
• Gland M20, 316L, IP66/68 NEMA TYPE 4X/6P
• Gland M20, hygiene, IP66/68/69 NEMA Type 4X/6P
• Thread M20, IP66/68 NEMA TYPE 4X/6P
• Thread G1/2, IP66/68 NEMA TYPE 4X/6P
If the G1/2 thread is selected, the device is delivered with an M20 thread as standard and a G1/2
adapter is included with the delivery, along with the corresponding documentation
• Thread NPT½, IP66/68 NEMA TYPE 4X/6P
• HAN7D plug, 90 degrees, IP65 NEMA TYPE 4X
• M12 plug
• When housing is closed and connecting cable is plugged in: IP66/67 NEMA TYPE 4X
• When housing is open or connecting cable is not plugged in: IP20, NEMA TYPE 1

NOTICE
Plug M12 and plug HAN7D: incorrect mounting can invalidate the IP protection class!
‣ The degree of protection only applies if the connecting cable used is plugged in and screwed
tight.
‣ The degree of protection only applies if the connecting cable used is specified according to IP67
NEMA TYPE 4X.
‣ The protection classes are only maintained if the dummy cap is used or the cable is connected.

Vibration resistance DIN EN 60068-2-64 / IEC 60068-2-64 for 5 to 2 000 Hz: 1.5 (m/s2)2/Hz

Endress+Hauser 33
 Micropilot FMR67B HART

Electromagnetic • Electromagnetic compatibility as per EN 61326 series and NAMUR recommendation EMC (NE21)
compatibility (EMC) • With regard to the safety function (SIL), the requirements of EN 61326-3-x are satisfied
• Maximum measured error during EMC testing: < 0.5 % of the span.
For more details refer to the EU Declaration of Conformity.

Process
Process pressure range LWARNING
The maximum pressure for the device depends on the lowest-rated component with regard to
pressure (components are: process connection, optional mounted parts or accessories).
‣ Only operate the device within the specified limits for the components!
‣ MWP (Maximum Working Pressure): The MWP is specified on the nameplate. This value refers
to a reference temperature of +20 °C (+68 °F) and may be applied to the device for an unlimited
time. Note temperature dependence of MWP. For flanges, refer to the following standards for
the permitted pressure values at higher temperatures: EN 1092-1 (with regard to their stability/
temperature property, the materials 1.4435 and 1.4404 are grouped together under EN 1092-1;
the chemical composition of the two materials can be identical), ASME B16.5, JIS B2220 (the
latest version of the standard applies in each case). MWP data that deviate from this are
provided in the relevant sections of the Technical Information.
‣ The Pressure Equipment Directive (2014/68/EU) uses the abbreviation PS . This corresponds to
the maximum working pressure (MWP) of the device.

The following tables show the dependencies between the seal material, process temperature (TP)
and process pressure range for each process connection that can be selected for the antenna used.

Drip-off antenna 50 mm (2 in)

Process connection UNI flange

Seal Tp Process pressure range

FKM Viton GLT –40 to +80 °C (–40 to +176 °F) –1 to 3 bar (–14.5 to 43.5 psi)

A0047827

The pressure range may be further restricted in the event of a CRN approval.

Horn antenna 65 mm (2.6 in)

Process connection standard flange

Seal Tp Process pressure range

Graphite –40 to +280 °C (–40 to +536 °F) –1 to 160 bar (–14.5 to 2 320.6 psi)

Graphite –40 to +450 °C (–40 to +842 °F) –1 to 160 bar (–14.5 to 2 320.6 psi)

A0047836

34 Endress+Hauser
Micropilot FMR67B HART

Process connection UNI flange, aluminum adjustable

Seal Tp Process pressure range

Graphite –40 to +280 °C (–40 to +536 °F) –1 to 1 bar (–14.5 to 14.5 psi)

A0048812

The pressure range may be further restricted in the event of a CRN approval.

Antenna flush mount, PTFE, 80 mm (3 in)

Process connection standard flange with purge air connection

Seal Tp Process pressure range

FKM Viton GLT –40 to +150 °C (–40 to +302 °F) –1 to 16 bar (–14.5 to 232 psi)

FKM Viton GLT –40 to +200 °C (–40 to +392 °F) –1 to 16 bar (–14.5 to 232 psi)

A0047828

Process connection UNI flange 316L with purge air connection

Seal Tp Process pressure range

FKM Viton GLT –40 to +150 °C (–40 to +302 °F) pgauge = –1 to 1 bar (–14.5 to 14.5 psi)

FKM Viton GLT –40 to +200 °C (–40 to +392 °F) pgauge = –1 to 1 bar (–14.5 to 14.5 psi)

A0047829

Process connection UNI flange, aluminum adjustable with purge air connection
Seal Tp Process pressure range

FKM Viton GLT –40 to +150 °C (–40 to +302 °F) –1 to 1 bar (–14.5 to 14.5 psi)

FKM Viton GLT –40 to +200 °C (–40 to +392 °F) –1 to 1 bar (–14.5 to 14.5 psi)

A0047830

The pressure range may be further restricted in the event of a CRN approval.

Dielectric constant For bulk solids

εr ≥ 1.6
Contact Endress+Hauser for applications with lower dielectric constants than indicated.

Mechanical construction
Dimensions The dimensions of the individual components must be added together for the total dimensions.

Endress+Hauser 35
 Micropilot FMR67B HART

Single compartment housing, plastic

!94 (3.7)
1 2

125.3 (4.93)

123.9 (4.88)
107.5 (4.23)
A0048768

 37 Dimensions of single compartment housing, plastic (PBT). Unit of measurement mm (in)

1 Height with cover with plastic viewing window
2 Cover without viewing window

Aluminum single compartment housing

!101 (3.98)
1 2 3
138 (5.43)

124 (4.88)
127 (5)

45 (1.77)

125 (4.92)

ESC

- + E

A0038380

 38 Dimensions of aluminum single compartment housing. Unit of measurement mm (in)

1 Height with cover with glass viewing window (devices for Ex d/XP, Dust-Ex)
2 Height with cover with plastic viewing window
3 Cover without viewing window

36 Endress+Hauser
Micropilot FMR67B HART

Single compartment housing, 316L, hygiene

1
2 3

143 (5.63)

134 (5.28)
130 (5.12)
92 (3.62) 123 (4.84)

123 (4.84)

A0050364

 39 Dimensions of single compartment housing, 316L, hygiene. Unit of measurement mm (in)

1 Height with cover with glass viewing window (dust Ex)
2 Height with cover with plastic viewing window
3 Cover without viewing window

Endress+Hauser 37
 Micropilot FMR67B HART

Aluminum dual compartment housing

132 (5.2)
121 (4.76)
118 (4.65) 115 (4.53)
3

!101 (3.98)
131 (5.16)
127 (5)
ESC

- + E

64 (2.52) 54 (2.13)
78 (3.07)
143 (5.63)

A0038377

 40 Dimensions of dual compartment housing. Unit of measurement mm (in)

1 Height with cover with glass viewing window (devices for Ex d/XP, Dust-Ex)
2 Height with cover with plastic viewing window
3 Cover without viewing window

38 Endress+Hauser
Micropilot FMR67B HART

Aluminum or 316L dual compartment housing, L-form

!101 (3.98) 110 (4.33)

1 2 3

144 (5.67)
133 (5.24)
130 (5.12)
!101 (3.98)
140 (5.51)
138 (5.43)

ESC

- + E

A0038381

 41 Dimensions of dual compartment housing, L-form. Unit of measurement mm (in)

1 Height with cover with glass viewing window (devices for Ex d/XP, Dust-Ex)
2 Height with cover with plastic viewing window
3 Cover without viewing window

DN65 horn antenna - flange process connection

R
L1
263 (10.35)

!65 (2.56)
A0046495

 42 Dimensions of DN65 horn antenna - flange process connection. Unit of measurement mm (in)
R Reference point of measurement
1 Bottom edge of housing
L1 466 mm (18.35 in); version with Ex d or XP approval +5 mm (+0.20 in)

The flange dimensions depend on the selected standard and sealing surface (order options).
Dimensions that deviate from the standard are indicated.

Endress+Hauser 39
 Micropilot FMR67B HART

DN65 horn antenna, with UNI flange and alignment unit

L1
263 (10.35)
!65 (2.56)

A0048883

 43 Dimensions of DN65 horn antenna, with UNI flange and alignment unit. Unit of measurement mm (in)
R Reference point of measurement
1 Bottom edge of housing
L1 466 mm (18.35 in); version with Ex d or XP approval +5 mm (+0.20 in)

UNI flange UNI 4"/DN100/100A for antennas with alignment unit

22 (0.87)
10 (0.39)

!95.2 (3.75)
!23 (0.91)
!
17
!19 (0.75)
5
(6
90 60°)

.8
9)
3
° (=

°
90
4×
45 °

4× 90°
90
° (=360°)
!185 (7.28)
!225 (8.86)

A0048838

 44 Dimensions of UNI flange UNI 4"/DN100/100A for antennas with alignment unit. Unit of
measurement mm (in)

40 Endress+Hauser
Micropilot FMR67B HART

UNI flange UNI 4"/DN100/100A

Suitable for ASME B16.5, 4" 150lbs / EN1092-1; DN100 PN16 / JIS B2220; 10K 100A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
1.4 kg (3.09 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

UNI flange 6"/DN150/150A for antennas with alignment unit

10 (0.39)

22 (0.87)
!95.2 (3.75)

!26 (1.02)

4×90°(=360°)
90°

45
°

!12 (0.47)
4×
90 °
90
°

(=3
60
°)

! 240 (9.45)
!280 (11)
A0048839

 45 Dimensions of UNI flange 6"/DN150/150A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 6"/DN150/150A

Suitable for ASME B16.5, 6" 150lbs / EN1092-1; DN150 PN16 / JIS B2220; 10K 150A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
2.2 kg (4.85 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

Endress+Hauser 41
 Micropilot FMR67B HART

UNI flange 8"/DN200/200A for antennas with alignment unit

A-A

22 (0.87)
10 (0.39)
!95.2 (3.75)

15°
!26 (1.02)

30°

!294.5 (11.6)
15°
30°

!340 (13.4)
A

30 °
30°
15°

15°
A0048840

 46 Dimensions of UNI flange 8"/DN200/200A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 8"/DN200/200A

Suitable for ASME B16.5, 8" 150lbs / EN1092-1; DN200 PN16 / JIS B2220; 10K 200A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
3.2 kg (7.05 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

42 Endress+Hauser
Micropilot FMR67B HART

UNI flange 10"/DN250/250A for antennas with alignment unit

10 (0.39)

22 (0.87)
!95.2 (3.75)

!26 (1.02)

12
×3 30
0° (= °
360°
)
!358 (14.1)
!405 (15.9)

A0048841

 47 Dimensions of UNI flange 10"/DN250/250A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 10"/DN250/250A

Suitable for ASME B16.5, 10" 150lbs / EN1092-1; DN250 PN16 / JIS B2220; 10K 250A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
4.7 kg (10.36 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

Endress+Hauser 43
 Micropilot FMR67B HART

Drip-off antenna, PTFE, 50 mm (2 in), with UNI flange and purge air connection

L2
L1

47 (1.85)
R

!42.5 (1.67)
A0046488

 48 Dimensions of Drip-off antenna, PTFE, 50 mm (2 in), with UNI flange and purge air connection. Unit of
measurement mm (in)
1 Bottom edge of housing
R Reference point of measurement
L1 175 mm (6.89 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 108 mm (4.25 in); version with Ex d or XP approval +5 mm (+0.20 in)

UNI flange 3"/DN80/80A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection

45°
19 (0.75)

M80×1.5

200 (7.9)
160 (6.3)
150 (5.9)

20 (0.79)

A0048875

 49 UNI flange 3"/DN80/80A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection. Unit of
measurement mm (in)

UNI flange 3"/DN80/80A

Suitable for flange: 3" 150lbs; DN80 PN16; 10K 80A
• Material:
PP
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
0.5 kg (1.10 lb)

44 Endress+Hauser
Micropilot FMR67B HART

UNI flange 4"/DN100/100A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection

45°

19 (0.75)

190.5 (7.5)

M80×1.5

228.6 (9)
175 (6.9)
20 (0.79)

A0048876

 50 UNI flange 4"/DN100/100A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection. Unit of
measurement mm (in)

UNI flange 4"/DN100/100A

Suitable for flange: 4" 150lbs; DN100 PN16; 10K 100A
• Material:
PP
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
0.65 kg (1.43 lb)

UNI flange 6"/DN150/150A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection

45°
23 (0.9)

241.3 (9.5)

285 (11.2)
M80×1.5
240 (9.4)

20 (0.79)

A0048877

 51 UNI flange 6"/DN150/150A for Drip-off antenna, PTFE, 50 mm (2 in) with purge air connection. Unit of
measurement mm (in)

UNI flange 6"/DN150/150A

Suitable for flange: 6" 150lbs; DN150 PN16; 10K 150A
• Material:
PP
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
1.1 kg (2.43 lb)

Endress+Hauser 45
 Micropilot FMR67B HART

Antenna flush mount, PTFE, 80 mm (3 in), with standard flange and purge air connection

A B 1
1

L3
L2

L4
L1

25.5 (1.0)
R

!62.5 (2.46)
A0046489

 52 Dimensions of antenna flush mount, PTFE, 80 mm (3 in), with standard flange and purge air connection .
Unit of measurement mm (in)
A Process temperature version ≤150 °C (302 °F)
B Process temperature version ≤200 °C (392 °F)
R Reference point of measurement
1 Bottom edge of housing
L1 158 mm (6.22 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 Variable dimension due to flange thickness (standard flange)
L3 Variable dimension due to flange thickness (standard flange)
L4 170 mm (6.69 in); version with Ex d or XP approval +5 mm (+0.20 in)

The flange dimensions depend on the selected standard and sealing surface (order options).
Dimensions that deviate from the standard are indicated.

46 Endress+Hauser
Micropilot FMR67B HART

Antenna flush mount, PTFE, 80 mm (3 in), with UNI flange and purge air connection

A B 1
1

L3
L2

L4
L1

13.5 (0.53)
R

!50 (1.97)
A0046490

 53 Dimensions of antenna flush mount, PTFE, 80 mm (3 in), with UNI flange and purge air connection. Unit
of measurement mm (in)
A Process temperature version ≤150 °C (302 °F)
B Process temperature version ≤200 °C (392 °F)
R Reference point of measurement
1 Bottom edge of housing
L1 158 mm (6.22 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 137 mm (5.39 in); version with Ex d or XP approval +5 mm (+0.20 in)
L3 149 mm (5.87 in); version with Ex d or XP approval +5 mm (+0.20 in)
L4 170 mm (6.69 in); version with Ex d or XP approval +5 mm (+0.20 in)

UNI flange 8"/DN200/200A for antenna flush mount, PTFE, 80 mm (3 in), purge air connection

!80.3 (3.16)
4×
90
°
60

!26 (1.02)
6×

!26 (1.02)

8 (0.31)
!294.5 (11.6)
!340 (13.4)
A0048820

 54 Dimensions of UNI flange 8"/DN200/200A for DN80 antenna with purge air connection. Unit of
measurement mm (in)

Endress+Hauser 47
 Micropilot FMR67B HART

UNI flange 8"/DN200/200A

Suitable for ASME B16.5, 8" 150lbs / EN1092-1; DN200 PN16 / JIS B2220; 10K 200A
• Material
316L
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
5.1 kg (11.24 lb)

UNI flange 10"/DN250/250A for antenna flush mount, PTFE, 80 mm (3 in), purge air connection

!80.3 (3.16)
°
60 !29 (1.14)
6×

8 (0.31)
!358 (14.1)
!405 (15.9)
A0048821

 55 Dimensions of UNI flange 10"/DN250/250A for DN80 antenna with purge air connection. Unit of
measurement mm (in)

UNI flange 10"/DN250/250A

Suitable for ASME B16.5, 10" 150lbs / EN1092-1; DN250 PN16 / JIS B2220; 10K 250A
• Material:
316L
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
7.9 kg (17.41 lb)

48 Endress+Hauser
Micropilot FMR67B HART

Antenna flush mount, 80 mm (3 in), with UNI flange, alignment unit and purge air connection

A B 1
1

L3
L2

L4
L1

11.5 (0.45)
!47 (1.85)

A0046491

 56 Dimensions of antenna flush mount, 80 mm (3 in), with UNI flange, alignment unit and purge air
connection. Unit of measurement mm (in)
A Process temperature version ≤150 °C (302 °F)
B Process temperature version ≤200 °C (392 °F)
R Reference point of measurement
1 Bottom edge of housing
L1 158 mm (6.22 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 134 mm (5.28 in); version with Ex d or XP approval +5 mm (+0.20 in)
L3 146 mm (5.75 in); version with Ex d or XP approval +5 mm (+0.20 in)
L4 170 mm (6.69 in); version with Ex d or XP approval +5 mm (+0.20 in)

Endress+Hauser 49
 Micropilot FMR67B HART

UNI flange UNI 4"/DN100/100A for antennas with alignment unit

22 (0.87)
10 (0.39)
!95.2 (3.75)

!23 (0.91)
!
17
!19 (0.75)
5
(6
90 60°)

.8
9)
3
° (=

°
90
4×
45 °

4× 90°
90
° (=360°)
!185 (7.28)
!225 (8.86)

A0048838

 57 Dimensions of UNI flange UNI 4"/DN100/100A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange UNI 4"/DN100/100A

Suitable for ASME B16.5, 4" 150lbs / EN1092-1; DN100 PN16 / JIS B2220; 10K 100A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
1.4 kg (3.09 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

50 Endress+Hauser
Micropilot FMR67B HART

UNI flange 6"/DN150/150A for antennas with alignment unit

10 (0.39)

22 (0.87)
!95.2 (3.75)

!26 (1.02)

4×90°(=360°)
90°

45
°
!12 (0.47)
4×
90 °
90
°

(=3
60
°)

! 240 (9.45)
!280 (11)
A0048839

 58 Dimensions of UNI flange 6"/DN150/150A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 6"/DN150/150A

Suitable for ASME B16.5, 6" 150lbs / EN1092-1; DN150 PN16 / JIS B2220; 10K 150A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
2.2 kg (4.85 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

Endress+Hauser 51
 Micropilot FMR67B HART

UNI flange 8"/DN200/200A for antennas with alignment unit

A-A

22 (0.87)
10 (0.39)
!95.2 (3.75)

15°
!26 (1.02)

30°

!294.5 (11.6)
15°
30°

!340 (13.4)
A

30 °
30°
15°

15°
A0048840

 59 Dimensions of UNI flange 8"/DN200/200A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 8"/DN200/200A

Suitable for ASME B16.5, 8" 150lbs / EN1092-1; DN200 PN16 / JIS B2220; 10K 200A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
3.2 kg (7.05 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

52 Endress+Hauser
Micropilot FMR67B HART

UNI flange 10"/DN250/250A for antennas with alignment unit

10 (0.39)

22 (0.87)
!95.2 (3.75)

!26 (1.02)

12
×3 30
0° (= °
360°
)
!358 (14.1)
!405 (15.9)

A0048841

 60 Dimensions of UNI flange 10"/DN250/250A for antennas with alignment unit. Unit of
measurement mm (in)

UNI flange 10"/DN250/250A

Suitable for ASME B16.5, 10" 150lbs / EN1092-1; DN250 PN16 / JIS B2220; 10K 250A
• Material:
Aluminum
• Process pressure:
≤1 bar (14.5 psi)
• Weight:
4.7 kg (10.36 lb)
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.

Weight The weights of the individual components must be added together for the total weight.

Housing
Weight including electronics and display.
Single compartment housing
• Plastic: 0.5 kg (1.10 lb)
• Aluminum: 1.2 kg (2.65 lb)
• 316L hygiene: 1.2 kg (2.65 lb)
Dual compartment housing
Aluminum: 1.4 kg (3.09 lb)
Dual compartment housing, L-form
• Aluminum: 1.7 kg (3.75 lb)
• Stainless steel: 4.5 kg (9.9 lb)

Endress+Hauser 53
 Micropilot FMR67B HART

Antenna and process connection adapter

The flange weight (316/316L) depends on the selected standard and sealing surface.
Details -> TI00426F or in the relevant standard
The heaviest version is indicated for the antenna weights

DN65 horn antenna

4.40 kg (9.70 lb) + flange weight
Drip-off antenna 50 mm (2 in)
1.70 kg (3.75 lb)
Antenna flush mount, PTFE, 80 mm (3 in)
3.20 kg (7.05 lb) + flange weight

Materials Materials not in contact with process

Plastic housing
• Housing: PBT/PC
• Dummy cover: PBT/PC
• Cover with window: PBT/PC and PC
• Cover seal: EPDM
• Potential equalization: 316L
• Seal under potential equalization: EPDM
• Plug: PBT-GF30-FR
• M20 cable gland: PA
• Seal on plug and cable gland: EPDM
• Threaded adapter as replacement for cable glands: PA66-GF30
• Nameplate: plastic foil
• TAG plate: plastic foil, metal or provided by customer

Aluminum housing, coated

• Housing: aluminum EN AC 44300
• Housing, cover coating: polyester
• Dummy cover: aluminum EN AC 44300
• Cover aluminum EN AC 44300 with PC Lexan 943A window
Cover aluminum EN AC 44300 with borosilicate window; optionally available as enclosed
accessory
For Ex d, Dust-Ex applications, the window is always made from borosilicate.
• Cover seal materials: HNBR
• Cover seal materials: FVMQ (only for low temperature version)
• Nameplate: plastic foil
• TAG plate: plastic foil, stainless steel or provided by the customer
• M20 cable glands: select material (stainless steel, nickel-plated brass, polyamide)

Stainless steel housing, 316L

• Housing: stainless steel 316L (1.4409)
• Dummy cover: stainless steel 316L (1.4409)
• 316L (1.4409) stainless steel cover with borosilicate window
• Cover seal materials: FVMQ (only for low temperature version)
• Cover seal materials: HNBR
• Nameplate: stainless steel housing, labeled directly
• TAG plate: plastic foil, stainless steel or provided by the customer
• M20 cable glands: select material (stainless steel, nickel-plated brass, polyamide)

Stainless steel housing, 316L hygiene

• Housing: stainless steel 316L (1.4404)
• Dummy cover: stainless steel 316L (1.4404)
• 316L (1.4404) stainless steel cover with PC Lexan 943A window
316L (1.4404) stainless steel cover with borosilicate window; can be optionally ordered as an
enclosed accessory
For Dust-Ex applications, the window is always made from borosilicate.
• Cover seal materials: EPDM

54 Endress+Hauser
Micropilot FMR67B HART

• Nameplate: stainless steel housing, labeled directly

• TAG plate: plastic foil, stainless steel or provided by the customer
• M20 cable glands: select material (stainless steel, nickel-plated brass, polyamide)

Materials in contact with the medium

DN65 horn antenna

A0046618

 61 Material; DN65 horn antenna. Unit of measurement mm (in)

1 Horn: 316L / 1.4404
Antenna: Al2O3 (ceramic)
Antenna seal: graphite
2 Process connection: 316L / 1.4404
3 Housing adapter: 316L / 1.4404

DN65 horn antenna, with UNI flange and alignment unit

3
4
5
6

A0048884

 62 Material; DN65 horn antenna, with UNI flange and alignment unit. Unit of measurement mm (in)
1 Horn: 316L / 1.4404
Antenna: Al2O3 (ceramic)
Antenna seal: graphite
2 Process connection: aluminum
3 Housing adapter: 316L / 1.4404
4 Sensor adapter with alignment unit: 316L / 1.4404
5 Screws: A4-70, A2-70
6 Clamping washer: 3.1645 / aluminum

Endress+Hauser 55
 Micropilot FMR67B HART

Drip-off antenna, purge air connection

5
6
2 7

1
A0046611

 63 Material; Drip-off antenna, purge air connection . Unit of measurement mm (in)

1 Antenna: PTFE, seal material FKM Viton GLT
2 Process connection: PP
3 Housing sensor adapter: 316L / 1.4404
4 Synthetic/organic fiber elastomer seal (asbestos-free), FA material
5 Threaded adapter, plug screw fitting: 316L / 1.4404
For NPT plug screw fitting: seal material PTFE tape
For G plug screw fitting or NPT adapter: seal material: FKM O-ring
6 Purge air adapter: PA-GF (polyamide fiber-glass reinforced)
7 Synthetic/organic fiber elastomer seal (asbestos-free), FA material

Antenna flush mount, 80 mm (3 in), with flange and purge air connection

4
5
2

1
A0046612

 64 Material; antenna flush mount, 80 mm (3 in), with flange and purge air connection. Unit of
measurement mm (in)
1 Antenna: PTFE, seal material FKM Viton GLT
2 Process connection: 316L / 1.4404
3 Housing adapter: 316L / 1.4404
4 Threaded adapter, plug screw fitting: 316L / 1.4404
For NPT plug screw fitting: seal material PTFE tape
For G plug screw fitting or NPT adapter: seal material: FKM O-ring
5 Integrated purge air adapter: 316L / 1.4404

56 Endress+Hauser
Micropilot FMR67B HART

Antenna flush mount, 80 mm (3 in), with UNI flange and purge air connection

1
A0046613

 65 Material; antenna flush mount, 80 mm (3 in), with UNI flange and purge air connection. Unit of
measurement mm (in)
1 Antenna: PTFE, seal material FKM Viton GLT
2 Process connection: 316L / 1.4404
3 Housing adapter: 316L / 1.4404
4 Threaded adapter, plug screw fitting: 316L / 1.4404
For NPT plug screw fitting: seal material PTFE tape
For G plug screw fitting or NPT adapter: seal material: FKM O-ring
5 Integrated purge air adapter: 316L / 1.4404

Antenna flush mount, 80 mm (3 in), with UNI flange, alignment unit and purge air connection

5
3 6
7

1
A0046614

 66 Material, antenna flush mount, 80 mm (3 in), with UNI flange, alignment unit and purge air connection
1 Antenna: PTFE, seal material FKM Viton GLT
2 Process connection: aluminum
3 Housing adapter: 316L / 1.4404
4 Threaded adapter, plug screw fitting, purge air adapter: 316L / 1.4404
For NPT plug screw fitting: seal material PTFE tape
For G plug screw fitting or NPT adapter: seal material: FKM O-ring
5 Sensor adapter with alignment unit: 316L / 1.4404
6 Screws: A4-70, A2-70
7 Clamping washer: 3.1645 / aluminum

Endress+Hauser 57
 Micropilot FMR67B HART

Operability
Operating concept Operator-oriented menu structure for user-specific tasks
• Guidance
• Diagnostics
• Application
• System
Fast and safe commissioning
• Interactive wizard with graphical user interface for guided commissioning in FieldCare, DeviceCare
or DTM, AMS and PDM-based third-party tools or SmartBlue
• Menu guidance with short explanations of the individual parameter functions
• Standardized operation at the device and in the operating tools
Integrated HistoROM data memory
• Adoption of data configuration when electronics modules are replaced
• Up to 100 event messages recorded in the device
Efficient diagnostic behavior increases measurement availability
• Remedial measures are integrated in plain text
• Diverse simulation options
Bluetooth (optionally integrated in local display)
• Quick and easy setup with SmartBlue app or PC with DeviceCare, version 1.07.05 and higher, or
FieldXpert SMT70
• No additional tools or adapters required
• Encrypted single point-to-point data transmission (tested by Fraunhofer Institute) and password-
protected communication via Bluetooth® wireless technology

Languages Operating languages

• English option (English option is set at the factory if no other language is ordered)
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык (Russian)
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• čeština (Czech)
• Svenska

58 Endress+Hauser
Micropilot FMR67B HART

Local operation Operating keys and DIP switches on the HART electronic insert

off on
2

off on
Display

4 3

A0046129

 67 Operating keys and DIP switches on the HART electronic insert

1 Operating key for reset password (for Bluetooth login and Maintenance user role)
1+2 Operating keys for device reset (as-delivered state)
2 Operating key II (only for factory reset)
3 DIP switch for alarm current
4 DIP switch for locking and unlocking the device

The setting of the DIP switches on the electronic insert has priority over the settings made via
other operation methods (e.g. FieldCare/DeviceCare).

Local display Device display (optional)

Functions:
• Display of measured values and fault and notice messages
• Background lighting, which switches from green to red in the event of an error
• The device display can be removed for easier operation

ESC

- + E

1
A0039284

 68 Graphic display with optical operating keys (1)

Remote operation Via HART protocol

Via service interface (CDI)

Operation via Bluetooth® wireless technology (optional)

Prerequisite
• Measuring device with display including Bluetooth
• Smartphone or tablet with Endress+Hauser SmartBlue app or PC with DeviceCare from version
1.07.05 or FieldXpert SMT70
The connection has a range of up to 25 m (82 ft). The range can vary depending on environmental
conditions such as attachments, walls or ceilings.
The operating keys on the display are locked as soon as the device is connected via Bluetooth.

Endress+Hauser 59
 Micropilot FMR67B HART

System integration HART

Version 7

Supported operating tools Smartphone or tablet with Endress+Hauser SmartBlue app, DeviceCare from version 1.07.05,
FieldCare, DTM, AMS and PDM

Certificates and approvals

Current certificates and approvals that are available for the product can be selected via the Product
Configurator at www.endress.com:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select Configuration.

CE mark The measuring system meets the legal requirements of the applicable EU directives. These are listed
in the corresponding EU Declaration of Conformity together with the standards applied.
The manufacturer confirms successful testing of the device by affixing to it the CE mark.

RoHS The measuring system meets the substance restrictions of the Directive on the Restriction of the Use
of Certain Hazardous Substances 2011/65/EU (RoHS 2) and the Delegated Directive (EU) 2015/863
(RoHS 3).

RCM marking The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products bear the RCM marking on the nameplate.

A0029561

Ex approvals Additional safety instructions must be followed for use in hazardous areas. Please refer to the
separate "Safety Instructions" (XA) document included in the delivery. Reference to the applicable XA
can be found on the nameplate.

Explosion-protected smartphones and tablets

If used in hazardous areas, mobile end devices with an Ex approval must be used.

Functional safety Use for level monitoring (MIN, MAX, range) up to SIL 3 (homogeneous or diverse redundancy),
independently evaluated by TÜV Rheinland in accordance with IEC 61508, refer to the "Functional
Safety Manual" for information.

Pressure equipment with Pressure instruments with a flange and threaded boss that do not have a pressurized housing do not
allowable pressure ≤ fall within the scope of the Pressure Equipment Directive, irrespective of the maximum allowable
200 bar (2 900 psi) pressure.

Reasons:
According to Article 2, point 5 of EU Directive 2014/68/EU, pressure accessories are defined as
"devices with an operational function and having pressure-bearing housings".
If a pressure instrument does not have a pressure-bearing housing (no identifiable pressure chamber
of its own), there is no pressure accessory present within the meaning of the Directive.

Radio approval Displays with Bluetooth LE have radio licenses according to CE and FCC. The relevant certification
information and labels are provided on display.

60 Endress+Hauser
Micropilot FMR67B HART

EN 302729 radio standard The devices comply with the LPR (Level Probing Radar) radio standard EN 302729.
The devices are approved for unrestricted use inside and outside closed containers in countries of the
EU and the EFTA. As a prerequisite, the countries must have already implemented this standard.
The standard is already implemented in the following countries:
Belgium, Bulgaria, Germany, Denmark, Estonia, France, Greece, UK, Ireland, Iceland, Italy,
Liechtenstein, Lithuania, Latvia, Malta, The Netherlands, Norway, Austria, Poland, Portugal,
Romania, Sweden, Switzerland, Slovakia, Spain, Czech Republic and Cyprus.
Implementation is still underway in all of the countries not listed.
Please note the following for the operation of the devices outside of closed vessels:
• Installation must be carried out by properly trained, expert staff.
• The device antenna must be installed in a fixed location pointing vertically downwards.
• The installation site must be located at a distance of 4 km (2.49 mi) from the astronomy stations
listed or otherwise approval must be provided by the relevant authority. If a device is installed
within a radius of 4 to 40 km (2.49 to 24.86 mi) around one of the listed stations, it must not be
installed at a height of more than 15 m (49 ft) above the ground.

Astronomy stations
Country Name of the station Latitude Longitude

Germany Effelsberg 50° 31' 32" North 06° 53' 00" East

Finland Metsähovi 60° 13' 04" North 24° 23' 37" East

Tuorla 60° 24' 56" North 24° 26' 31" East

France Plateau de Bure 44° 38' 01" North 05° 54' 26" East

Floirac 44° 50' 10" North 00° 31' 37" West

Great Britain Cambridge 52° 09' 59" North 00° 02' 20" East

Damhall 53° 09' 22" North 02° 32' 03" West

Jodrell Bank 53° 14' 10" North 02° 18' 26" West

Knockin 52° 47' 24" North 02° 59' 45" West

Pickmere 53° 17' 18" North 02° 26' 38" West

Italy Medicina 44° 31' 14" North 11° 38' 49" East

Noto 36° 52' 34" North 14° 59' 21" East

Sardinia 39° 29' 50" North 09° 14' 40" East

Poland Fort Skala Krakow 50° 03' 18" North 19° 49' 36" East

Russia Dmitrov 56° 26' 00" North 37° 27' 00" East

Kalyazin 57° 13' 22" North 37° 54' 01" East

Pushchino 54° 49' 00" North 37° 40' 00" East

Zelenchukskaya 43° 49' 53" North 41° 35' 32" East

Sweden Onsala 57° 23' 45" North 11° 55' 35" East

Switzerland Bleien 47° 20' 26" North 08° 06' 44" East

Spain Yebes 40° 31' 27" North 03° 05' 22" West

Robledo 40° 25' 38" North 04° 14' 57" West

Hungary Penc 47° 47' 22" North 19° 16' 53" East

As a general rule, the requirements outlined in EN 302729 must be observed.

EN 302372 radio standard The devices comply with the TLPR (Tanks Level Probing Radar) radio standard EN 302372 and are
permitted for use in closed vessels. Points a to f in Annex E of EN 302372 must be observed for the
installation.

Endress+Hauser 61
 Micropilot FMR67B HART

FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
[Any] changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
The devices are compliant with the FCC Code of Federal Regulations, CFR 47, Part 15, Sections
15.205, 15.207, 15.209.
In addition, the devices are compliant with Section 15.256. For these LPR (Level Probe Radar)
applications the devices must be professionally installed in a downward operating position. In
addition, the devices are not allowed to be mounted in a zone of 4 km (2.49 mi) around RAS
stations and within a radius of 40 km (24.86 mi) around RAS stations the maxium operation
height of devices is 15 m (49 ft) above ground.

Industry Canada Canada CNR-Gen Section 7.1.3

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) This device may not interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
[Any] changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
• The installation of the LPR/TLPR device shall be done by trained installers, in strict compliance
with the manufacturer’s instructions.
• The use of this device is on a “no-interference, no-protection” basis. That is, the user shall accept
operations of high-powered radar in the same frequency band which may interfere with or
damage this device. However, devices found to interfere with primary licensing operations will be
required to be removed at the user’s expense.
• This device shall be installed and operated in a completely enclosed container to prevent RF
emissions, which can otherwise interfere with aeronautical navigation.
• The installer/user of this device shall ensure that it is at least 10 km from the Dominion
Astrophysical Radio Observatory (DRAO) near Penticton, British Columbia. The coordinates of the
DRAO are latitude 49°19ʹ15ʹʹ N and longitude 119°37ʹ12ʹʹ W. For devices not meeting this 10 km
separation (e.g., those in the Okanagan Valley, British Columbia,) the installer/user must
coordinate with, and obtain the written concurrence of, the Director of the DRAO before the
equipment can be installed or operated. The Director of the DRAO may be contacted at
250-497-2300 (tel.) or 250-497-2355 (fax). (Alternatively, the Manager, Regulatory Standards
Industry Canada, may be contacted.)

Other standards and • EN 60529

guidelines Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use
• IEC/EN 61326
Emission in accordance with Class A requirements A; Electromagnetic compatibility (EMC
requirements)
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 107
Status categorization in accordance with NE 107
• NAMUR NE 131
Requirements for field devices for standard applications
• IEC 61508
Functional safety of safety-related electric/electronic/programmable electronic systems

62 Endress+Hauser
Micropilot FMR67B HART

Ordering information
Detailed ordering information is available from your nearest sales organization
www.addresses.endress.com or in the Product Configurator at www.endress.com:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select Configuration.

Product Configurator - the tool for individual product configuration

• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output format
• Ability to order directly in the Endress+Hauser Online Shop

Calibration Factory calibration certificate

The calibration points are spread evenly over the measuring range (0 to 100 %). The Empty
calibration E and Full calibration F must be specified to define the measuring range. If this
information is missing, antenna-dependent default values are used instead.

R
A

100%
E
F

0%
A0032643

R Reference point of measurement

A Minimum distance between reference point R and 100% mark
E Empty calibration
F Full calibration

Measuring range restrictions

The following restrictions must be considered when selecting E and F:
• Minimum distance between reference point R and 100% mark
A ≥ 400 mm (16 in)
• Minimum span
F ≥ 45 mm (1.77 in)
• Maximum value for Empty calibration
E ≥ 450 mm (17.72 in) (maximum 50 m (164 ft))
• Calibration takes place under reference conditions .
• The selected values for Empty calibration and Full calibration are only used to create the
factory calibration certificate. Afterwards, the values are reset to the default values specific
for the antenna. If values other than the default values are required, they must be ordered as
a customized empty/full calibration.
Product Configurator → Optional → Service → Customized empty/full calibration

Service The following services, among others, can be selected via the Product Configurator.
• Cleaned of oil+grease (wetted)
• PWIS-free (paint-wetting impairment substances)
• ANSI Safety Red coating, coated housing cover
• Set damping
• Set HART Burst Mode PV

Endress+Hauser 63
 Micropilot FMR67B HART

• Set max. alarm current

• Bluetooth communication is disabled on delivery
• Customized empty/full calibration
• Product documentation on paper
A printed (hard copy) version of test reports, declarations and inspection certificates can optionally
be ordered via the Service feature, Product documentation on paper type. The documents can be
selected via the Test, certificate, declaration feature are then provided with the device upon
delivery.

Test, certificate, declaration All test reports, declarations and inspection certificates are provided electronically in the Device
Viewer:
Enter the serial number from the nameplate (www.endress.com/deviceviewer)

Marking Measuring point (TAG)

The device can be ordered with a tag name.
Location of tag name
Select in the additional specification:
• Stainless steel wired-on tag plate
• Paper adhesive label
• TAG provided by the customer
• RFID TAG
• RFID TAG + stainless steel wired-on tag plate
• RFID TAG + paper adhesive label
• RFID TAG + TAG provided by the customer
• DIN SPEC 91406 stainless steel TAG
• DIN SPEC 91406 stainless steel TAG + NFC TAG
• DIN SPEC 91406 stainless steel TAG, stainless steel TAG
• DIN SPEC 91406 stainless steel TAG + NFC, stainless steel TAG
• DIN SPEC 91406 stainless steel TAG, plate supplied
• DIN SPEC 91406 stainless steel TAG + NFC, plate supplied
Definition of tag name
Specify in the additional specification:
3 lines with a maximum of 18 characters per line
The specified tag name appears on the selected plate and/or on the RFID TAG.
Presentation in the SmartBlue app
The first 32 characters of the tag name
The tag name can always be changed specifically for the measuring point via Bluetooth.
Presentation on the electronic nameplate (ENP)
The first 32 characters of the tag name

Application packages
Heartbeat Technology The Heartbeat Verification + Monitoring application package offers diagnostic functionality through
continuous self-monitoring, the transmission of additional measured variables to an external
Condition Monitoring system and the in-situ verification of devices in the application.
The application package can be ordered together with the device or can be activated subsequently
with an activation code. Detailed information on the order code is available via the Endress+Hauser
website www.endress.com or from your local Endress+Hauser Sales Center.

Heartbeat Verification
Heartbeat Verification is performed on demand and complements the self-monitoring function,
which is performed constantly, with additional checks. During verification, the system checks
whether the device components comply with the factory specifications. Both the sensor and the
electronics modules are included in the tests.
Heartbeat Verification confirms on demand that the device is functioning within the specified
measuring tolerance with a total test coverage TTC (Total Test Coverage) specified as a percentage.
Heartbeat Verification meets the requirements for measurement traceability in accordance with ISO
9001 (ISO9001:2015 Section 7.1.5.2).

64 Endress+Hauser
Micropilot FMR67B HART

The verification result is Passed or Failed. The verification data is saved in the device on a "First In,
First Out" basis (FIFO) and optionally saved on a PC with the FieldCare asset management software
or in the Netilion Library. Based on this data, a verification report is generated automatically to
ensure the traceable documentation of the verification results.

Heartbeat Monitoring
Loop diagnostics wizard (→  65), Foam detection wizard (→  65) and Build-up detection
wizard (→  65) are available. In addition, other monitoring parameters can be output for use in
predictive maintenance or application optimization.

"Loop diagnostics" wizard

Using this wizard, changes in the current-voltage loop characteristics (baseline) can be used to detect
unwanted installation anomalies such as creep currents caused by terminal corrosion or a
deteriorating power supply that can lead to an incorrect 4-20 mA measured value.

Areas of application
• Detection of changes in the measuring circuit resistance due to anomalies
Examples: Contact resistance or leakage currents in wiring, terminals or grounding due to
corrosion and/or moisture
• Detection of faulty power supply

"Foam detection" wizard

This wizard configures the automatic foam detection.
Foam detection can be linked to an output variable or status information e.g. to control a sprinkler
used to dissolve the foam. It is also possible to monitor the foam increase in a so called foam index.
The foam index can also be linked to an output variable and can be shown on the display.
Preparation:
The Foam monitoring initialization should only be done without or less foam.

Areas of application
• Measurement in liquids
• Reliable detection of foam on the medium

"Build-up detection" wizard

This wizard configures the build-up detection.
Basic idea:
The build-up detection can, for example, be linked to a compressed-air system to clean the antenna.
With the build-up monitoring the maintenance cycles can be optimized.
Preparation:
The build-up monitoring initialization should only be done without or less build-up.

Areas of application
• Measurement in liquids and solids
• Reliable detection of buildup on the antenna

Detailed description
Special Documentation SD02953F

Accessories
Weather protection cover The weather protection cover can be ordered together with the device via the "Accessory enclosed"
316L product structure.
It is used to protect against direct sunlight, precipitation and ice.
Weather protection cover 316L is suitable for the dual compartment housing made of aluminum or
316L. The delivery includes the holder for direct mounting on the housing.

Endress+Hauser 65
 Micropilot FMR67B HART

228.9 (9.01)
136.4 (5.37) 92.5 (3.64) 170.5 (6.71)

73.5 (2.89)
102.5 (4.04)

135 (5.31)
!65 (2.5
6 )
81 (3.19)
103 (4.06)

A0039231

 69 Dimensions. Unit of measurement mm (in)

Material
• Weather protection cover: 316L
• Clamping screw: A4
• Holder: 316L
Order number for accessories:
71438303

Plastic weather protection The weather protection cover can be ordered together with the device via the "Accessory enclosed"
cover product structure.
It is used to protect against direct sunlight, precipitation and ice.
The plastic weather protection cover is suitable for the single compartment housing made of
aluminum. The delivery includes the holder for direct mounting on the housing.

!115 (4.53)
122 (4.8)

140 (5.51) 32 (1.26)

165 (6.5) 140 (5.51)

A0038280

 70 Dimensions. Unit of measurement mm (in)

Material
Plastic
Order number for accessories:
71438291

Adjustable flange seal The adjustable flange seal is used to align the sensor to the surface of the product. It can be ordered
directly with the device via the product structure "Accessory enclosed" or individually via the specific
order number.

Seal, adjustable, DN80

The seal, adjustable, DN80 is compatible with flanges EN DN80 PN10/PN40

66 Endress+Hauser
Micropilot FMR67B HART

±8°

4°
ø89 (3.5)

22 (0.87)

14 (0.55)
30 (1.18)
ø142 (5.59)

A0046695

Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71074263

Seal, adjustable, DN100

The seal, adjustable, DN100 is compatible with flanges EN DN100 PN10/PN16

±8°
4°

ø115 (4.53)

14 (0.55)
33 (1.3)
23.5 (0.93)

ø162 (6.38)

A0046696

Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71074264

Seal, adjustable, DN150

The seal, adjustable, DN150 is compatible with flanges EN DN150 PN10/PN19 and JIS 10K 150A

±8°
4°

ø169 (6.65)
14 (0.55)
39 (1.45)
26.5 (1.04)

ø218 (8.58)

A0046697

Endress+Hauser 67
 Micropilot FMR67B HART

Technical data
• Material: EPDM
• Recommended screw size: M18
• Recommended screw length: 110 mm (4.3 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71074265

Seal, adjustable, ASME 3"/ JIS 80A

The seal, adjustable, ASME 3"/ JIS 80A is compatible with flanges ASME 3" 150 lbs and JIS 80A 10K

±8°
4°

ø89 (3.5)
22 (0.87)

14 (0.55)
30 (1.18)
ø133 (5.2)

A0046698

Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71249070

Seal, adjustable, ASME 4"

The seal, adjustable, ASME 4" is compatible with flanges ASME 4" 150 lbs

±8°
4°

ø115 (4.53)
33 (1.3)

14 (0.55)
23.5 (0.93)

ø171 (6.7)

A0046699

Technical data
• Material: EPDM
• Recommended screw size: M14
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

68 Endress+Hauser
Micropilot FMR67B HART

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71249072

Seal, adjustable, ASME 6"/ JIS 150A

The seal, adjustable, ASME 6"/ JIS 150A is compatible with flanges ASME 6" 150 lbs and
JIS 150A 10K

±8°
4°

ø168 (6.6)

14 (0.55)
39 (1.45)
26.5 (1.04)
ø219 (8.6)

A0046700

Technical data
• Material: EPDM
• Recommended screw size: M18
• Recommended screw length: 100 mm (3.9 in)
• Process pressure: –0.1 to 0.1 bar (–1.45 to 1.45 psi)
• Process temperature: –40 to +80 °C (–40 to +176 °F)

Ordering information
• The flange seal can be ordered together with the device via the "Accessory enclosed" product
structure.
• Order number: 71249073

M12 socket

A0051231

 71 M12 socket, straight

M12 socket, straight

• Material:
Body: PBT; union nut: nickel-plated die-cast zinc; seal: NBR
• Degree of protection (fully locked): IP67
• Pg coupling: Pg7
• Order number: 52006263

A0051232

 72 M12 socket, angled

Endress+Hauser 69
 Micropilot FMR67B HART

M12 socket, angled

• Material:
Body: PBT; union nut: nickel-plated die-cast zinc; seal: NBR
• Degree of protection (fully locked): IP67
• Pg coupling: Pg7
• Order number: 71114212

A0051233

 73 M12 socket, angled, cable

M12 socket, angled, 5 m (16 ft) cable

• M12 socket material:
• Body: TPU
• Union nut: nickel-plated die-cast zinc
• Cable material:
PVC
• Cable Li Y YM 4×0.34 mm2 (20 AWG)
• Cable colors
• 1 = BN = brown
• 2 = WH = white
• 3 = BU = blue
• 4 = BK = black
• Order number: 52010285

Remote display FHX50B The remote display is ordered via the Product Configurator.
If the remote display is to be used, the device version Prepared for display FHX50B must be
ordered.

70 Endress+Hauser
Micropilot FMR67B HART

A D

E
B

F
C

A0046692

A Plastic single compartment housing, remote display

B Aluminum single compartment housing, remote display
C Single compartment housing, 316L hygiene, remote display
D Device side, plastic single compartment housing prepared for display FHX50B
E Device side, aluminum single compartment housing prepared for display FHX50B
F Device side, dual compartment housing, L-form, prepared for display FHX50B
G Device side, single compartment housing, 316L hygiene, prepared for display FHX50B

Material of single compartment housing, remote display

• Aluminum
• Plastic
Degree of protection:
• IP68 / NEMA 6P
• IP66 / NEMA 4x
Connecting cable:
• Connecting cable (option) up to 30 m (98 ft)
• Customer-supplied standard cable up to 60 m (197 ft)
Recommendation: EtherLine®-P CAT.5e from LAPP.
Specification of customer-supplied connecting cable
Push-in CAGE CLAMP®, connection technology, push actuation
• Conductor cross-section:
• Solid conductor 0.2 to 0.75 mm2 (24 to 18 AWG)
• Fine-stranded conductor 0.2 to 0.75 mm2 (24 to 18 AWG)
• Fine-stranded conductor; with insulated ferrule 0.25 to 0.34 mm2
• Fine-stranded conductor; without insulated ferrule 0.25 to 0.34 mm2
• Stripping length 7 to 9 mm (0.28 to 0.35 in)
• Outer diameter: 6 to 10 mm (0.24 to 0.4 in)
• Maximum cable length: 60 m (197 ft)
Ambient temperature:
• –40 to +80 °C (–40 to +176 °F)
• Option: –50 to +80 °C (–58 to +176 °F)

Commubox FXA195 HART For intrinsically safe HART communication with FieldCare via the USB interface
For details, see "Technical Information" TI00404F

Endress+Hauser 71
 Micropilot FMR67B HART

HART Loop Converter Is used to evaluate and convert dynamic HART process variables to analog current signals or limit
HMX50 values.
Order number:
71063562
For details, see "Technical Information" TI00429F and Operating Instructions BA00371F

FieldPort SWA50 Intelligent Bluetooth® and/or WirelessHART adapter for all HART field devices
For details, see "Technical Information" TI01468S

Wireless HART adapter The WirelessHART adapter is used for the wireless connection of field devices. It can be easily
SWA70 integrated into field devices and existing infrastructures, offers data protection and transmission
safety and can be operated in parallel with other wireless networks.
For details, see Operating Instructions BA00061S

Fieldgate FXA42 Fieldgates enable communication between connected 4 to 20 mA, Modbus RS485 and Modbus TCP
devices and SupplyCare Hosting or SupplyCare Enterprise. The signals are transmitted either via
Ethernet TCP/IP, WLAN or mobile communications (UMTS). Advanced automation capabilities are
available, such as an integrated Web-PLC, OpenVPN and other functions.
For details, see "Technical Information" TI01297S and Operating Instructions BA01778S.

Field Xpert SMT70 Universal, high-performance tablet PC for device configuration in Ex Zone 2 and non-Ex areas
For details, see "Technical Information" TI01342S

DeviceCare SFE100 Configuration tool for HART, PROFIBUS and FOUNDATION Fieldbus field devices
Technical Information TI01134S

FieldCare SFE500 FDT-based plant asset management tool

It can configure all smart field units in your system and helps you manage them. By using the status
information, it is also a simple but effective way of checking their status and condition.
Technical Information TI00028S

Memograph M The Memograph M graphic data manager provides information on all the relevant process variables.
Measured values are recorded correctly, limit values are monitored and measuring points analyzed.
The data are stored in the 256 MB internal memory and also on an SD card or USB stick.
Technical Information TI00133R and Operating Instructions BA00247R

RN42 Single-channel active barrier with wide-range power supply for safe electrical isolation of
4 to 20 mA standard signal circuits, HART transparent.
Technical Information TI01584K and Operating Instructions BA02090K

Documentation
For an overview of the scope of the associated Technical Documentation, refer to the following:
• Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the
nameplate
• Endress+Hauser Operations app: Enter serial number from nameplate or scan matrix code on
nameplate.

72 Endress+Hauser
Micropilot FMR67B HART

Document function The following documentation may be available depending on the version ordered:

Document type Purpose and content of the document

Technical Information (TI) Planning aid for your device

The document contains all the technical data on the device and provides
an overview of the accessories and other products that can be ordered for
the device.

Brief Operating Instructions (KA) Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information
from incoming acceptance to initial commissioning.

Operating Instructions (BA) Your reference document

The Operating Instructions contain all the information that is required in
the various phases of the life cycle of the device: from product
identification, incoming acceptance and storage, to mounting,
connection, operation and commissioning through to troubleshooting,
maintenance and disposal.

Description of Device Parameters Reference for your parameters

(GP) The document provides a detailed explanation of each individual
parameter. The description is aimed at those who work with the device
over the entire life cycle and perform specific configurations.

Safety Instructions (XA) Depending on the approval, safety instructions for electrical equipment in
hazardous areas are also supplied with the device. The Safety Instructions
are an integral part of the Operating Instructions.

 provided
Information on the Safety Instructions (XA) relevant to the device is
on the nameplate.

Supplementary device-dependent Always comply strictly with the instructions in the relevant
documentation (SD/FY) supplementary documentation. The supplementary documentation is an
integral part of the device documentation.

Registered trademarks
HART®
Registered trademark of the FieldComm Group, Austin, Texas, USA
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Endress+Hauser is under license. Other trademarks and trade names are
those of their respective owners.
Apple®
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Android®
Android, Google Play and the Google Play logo are trademarks of Google Inc.
KALREZ®, VITON®
Registered trademarks of DuPont Performance Elastomers L.L.C., Wilmington, DE USA

Endress+Hauser 73
*71597497*
71597497

www.addresses.endress.com