SL22 THRU SL24

LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE - 20 to 40 Volts CURRENT - 2.0 Amperes

FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O SMB/DO-214AA
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Metal to silicon rectifier
majority carrier conduction
l Low power loss, High efficiency
l High current capability, low VF
l High surge capacity
l For use in low voltage high frequency inverters,
free wheeling, and polarity protection applications
l High temperature soldering guaranteed:
260 ¢J /10 seconds at terminals

MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.
Resistive or inductive load.
SYMBOLS SL22 SL23 SL24 UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 Volts
Maximum RMS Voltage VRMS 14 21 28 Volts
Maximum DC Blocking Voltage VDC 20 30 40 Volts
Maximum Average Forward Rectified Current I(AV) 2.0 Amps
at TL (See Figure 1)
Peak Forward Surge Current 8.3ms single half sine- IFSM 50.0 Amps
wave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 2.0A VF 0.38 0.38 0.40 Volts
(Note 1)
Maximum DC Reverse Current TA=25 ¢J (Note 1) IR 0.5 mA
At Rated DC Blocking Voltage TA=100 ¢J 20.0
Maximum Thermal Resistance (Note 2) R £KJL 17 ¢J /W
R £KJA 75
Operating Junction Temperature Range TJ -50 to +125 ¢J
Storage Temperature Range TSTG -50 to +150 ¢J

NOTES:
1. Pulse Test with PW=300 £gs, 1% Duty Cycle.
2. Mounted on P.C.Board with 8.0mm2 (.013mm thick) copper pad areas.
RATING AND CHARACTERISTIC CURVES
SL22 THRU S210

50

INSTANTANEOUS FORWARD CURRENT,

TJ = 25 ¢J
f = 1.0mHz
AVERAGE FORWARD RECTIFIED

10 Vsig = 50Mvp-p
20
CURRENT AMPERES

AMPERES
1.5

1.0 1

RESISTIVE OR
INDUCTIVE LOAD P.C.
0.5 BOARD MOUNTED ON
8.0mm 2 COPPER LAND
AREAS
0.1
0
50 60 70 80 90 100 110 120 130 150 .0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5

LEAD TEMPERATURE, ¢J INSTANTANEOUS FORWARD VOLTAGE, VOLTS

Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS

10
INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES

100
CAPACITANCE, pF

1.0 T J = 100 ¢J TJ = 25 ¢J
f = 1.0MHz
10
Vsig = 50mVp-p

T J = 75 ¢J
0.1

1
0.1 0.4 1 4 10 40 80 100
TJ = 25 ¢J
0.01 REVERSE VOLTAGE VOLTS

Fig. 4-TYPICAL JUNCTION CAPACITANCE

0.001
20 40 60 80 100 120 140
PEAK FORWARD SURGE CURRENT,

60
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
50

8.3ms SINGLE HALF SINE-WAVE

Fig. 3-TYPICAL REVERSE CHARACTERISTICS 40
JEDEC METHOD
AMPERES

30

20

10

1 2 5 10 20 50 100

NUMBER OF CYCLES AT 60Hz

Fig. 5-MAXIMUM NON-REPETITIVE PEAK FORWARD

SURGE CURRENT