Scribd
Upload
18 views2 pages

Bracket design

Civil design of Bracket

Uploaded by

satydevsinghnegi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views2 pages

Bracket design

Civil design of Bracket

Uploaded by

satydevsinghnegi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Bracket design.

xlsx

5.0 Splicing Detail for Splay Strut at Level-1 & 2

5.1 Section Considered : UC 305x305x158.1 kg/m

Web Splice plate


Flange Splice plate

327.1 Web Splice plate

Flange Splice plate

5.2 Member Flange Splice


Flange size of I beam a = 311.2 mm
b = 25 mm
Area of flange for One section axb = 7780 mm2
Area of Splice Plate Reqd. (5% Extra) = 8169
Thickness of splice plate = 20 mm
Width of the splice plate required = 408 mm Say 420 mm

2
Yield Strength of Steel Section fy = 330 N/mm
Material Factor m = 1.1
Force carried by the flange plate = 8169 x 330/1.1
= 2451 kN

Size of the weld for flange splice = 12 mm OK


Ultimate Strength of Weld (IS 814, Table -8) fu = 540 Mpa
Partial Safety factor for Site Weld = 1.5 Mpa
Design Strength of Weld fwd = (fu /√3)/
= 208 Mpa

Weld strength per mm of length (90° fillet weld) = 0.7×208×12


= 1746 N/mm

Total weld length required for the flange plate = 2451/1746×1000


lt = 1404 mm

Assumed Length of Plate Say 1200 mm

Total Length of Weld provided 1511 mm

Therefore provide flange plate of 1200 x 420 x 20 with 12 mm weld on either side

5.3 Member Web Splice


Depth of the web = 277.1 mm
Thickness of the web = 15.8 mm
Area of web Plate = 4378.18 mm2
Area of Splice Plates Reqd. = 4597 mm
Thickness of web splice plate considered on one side of Web = 10 mm
Depth of the web plate required = 230 mm
Provided depth of Web Plate = 230 mm
Bracket design.xlsx

5.0 Splicing Detail for Splay Strut at Level-1 & 2

Yield Strength of Steel Section fy = 350 N/mm2


Material Factor m = 1.1
Force carried by the flange plate = 4597.089 x 350/1.1/2
= 731 kN

Size of the weld for flange splice = 8 mm


Ultimate Strength of Weld (IS 814, Table -8) fu = 540 Mpa
Partial Safety factor for Site Weld = 1.5 Mpa
Design Strength of Weld fwd = (fu /√3)/
= 208 Mpa

Weld strength per mm of length (90° fillet weld) = 0.7×208×8


= 1164 N/mm

Total weld length required for the flange plate = 731/1164×1000


lt = 628 mm

Assumed Length of Plate Say 500 mm

Total Length of Weld provided 730 mm

Therefore provide web plate of 500 x 230 x 10 with 8 mm weld on either side

You might also like