VIVEK MACHINE TOOLS
GONDAL ROAD, B/H. RAJKAMAL PETROL PUMP, PUNIT NAGAR MAIN ROAD, POST : VAVDI
RAJKOT-360004 (GUJARAT) INDIA PHONE : +91-281-2386379 MOBILE : +91 9824417036
E-mail : [email protected]
20 TON HYDRAULIC C-FRAME PRESS
Steel Body Hydraulic “C” Frame 20 TON Capacity HEAVY DUTY TRIPLE SPEED
with Adj. Stroke (STROKE - 100 mm) Press Machine. Complete with all Standard
Accessories with Electricals & Require Panel.
20 TON SPECIFICATIONS:
CAPACITY : 20 TONS
CYLINDER ROD DIA. : 80 MM
STROKE ADJUSTMENT WITH CYLINDER : 100 MM
RAM ADJUSTMENT WITH SCREW : 38 MM
HOLE IN RAM : 32 MM
DISTANCE BED TO RAM UP STROKE : 300 MM
DISTANCE BED TO RAM DOWN STROKE : 200 MM
DEPTH OF THROAT : 177 MM
LENGTH X WIDTH OF BED : 533 X 355 X 50 MM
BED PLATE : 533 X 355 X 30 MM
HOLE IN BED : 88 MM
FLOOR TO TOP OF BED : 810 MM
STROKE PER MINUTE (25 MM) : 55 (Ideal Condition)
CENTRE TO BACK : 177 MM
MOTOR REQUIRED : 3 H.P.
MOTOR RPM : 1440 (RPM)
OIL TANK : 160 LTR.
MACHINE COLOR : AS PER CATLOGUES
Should you need any further clarifications, please do consult us.
Yours faithfully,
For, VIVEK MACHINE TOOLS
VIVEK MACHINE TOOLS
GONDAL ROAD, B/H. RAJKAMAL PETROL PUMP, PUNIT NAGAR MAIN ROAD, POST : VAVDI
RAJKOT-360004 (GUJARAT) INDIA PHONE : +91-281-2386379 MOBILE : +91 9824417036
E-mail :
[email protected] 20 TON HYDRAULIC C-FRAME PRESS
HYDRAULIC SYSTEM :
The Compact Blocks Eliminate. The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise
Hydraulic System Is Placed On The Rear Side Of Machine, on Top Between Two Side Plates. Pressure Relief
Value Is Provided To Safe Guard The System Is Driven. By An Electric Motor Of Reputed Brand And Is
Coupled With A Pump Capable of Generating More Than The required Pressure, Back Pressure And Holding
Pressure Are Providing On Top Oil Tank For Quick Reference.
ELECTRICAL AND CONTROL PANEL :
The Electric Control Panel Is Located On The Left Hand Side of The Machine. It Is Assembled From The
Internationally. Reputed Parts For Consistent Performance, Reliability And Availability, if Needed To Be
Replaced. It Is Wired Cleanly and Labelled / Ferruled Properly As Per The International Practices To Help
Easily Located any Fault And Replace Components Conveniently.
CYLINDER :
The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long
Sealing Life. The Piston Rods Are Made From En – 8 Material Having Low Carbon Contents. The Piston Rod
Is Hard Chrome Platted (0.200 Micron)
TABLE AND SLIDE (RAM) :
Table And Slide Are Made of High Grade Heavy Duty Cast iron / Steel Fabricated And Properly Seasoned.
They Are Perfectly Aligned, To Each Other To Obtain High Accuracy And Precession Press Operation.
FOLLOWINGS BRANDS PARTS ARE USED IN OUR MAKING
ELECTRICAL CONTROL PANEL: Siemens / Schneider / Telemec. / Moller / Idec / Phoenix / Salzer / Laptron /
Elmex / etcreputed make.
ELECTRIC MOTOR: ABB / Crompton or equivalent
ELECTRIC WIRE: Finolex RR Cable / Polycab
HYDRAULIC POWER PACK: Polyhydron / Hydroline / Yuken / DOWTY / Micro / Jacktech
FRAME:
The Frame Is Rigidly Constructed from Solid Steel Plates With Safeguards, its Interlocked Design Provides
Support To The Bed Directly On The Frame To Avoid Weak Sections At Load Supports.
FEATURES :
100% LEAK FREE DESIGN I ENERGY EFFICIENT DESIGN I COMPACTLAYOUT HYDRAULIC SYSTEM LOW
NOISELEVEL OF HYDRAULIC PUMP-MOTOR ATTACHMENT I USER FRIENDLY ARRANGEMENT
VIVEK MACHINE TOOLS
GONDAL ROAD, B/H. RAJKAMAL PETROL PUMP, PUNIT NAGAR MAIN ROAD, POST : VAVDI
RAJKOT-360004 (GUJARAT) INDIA PHONE : +91-281-2386379 MOBILE : +91 9824417036
E-mail : [email protected]
20 TON HYDRAULIC C-FRAME PRESS
