CARE SOLUTIONS

1 2

FOR
ALL TYPES
OF LENSES:
-
WITH HYBRID, PRESERVATIVE
FOR SUBTILISIN A SOFT, AND FREE
ALL TYPES 3 4 RIGID
OF LENSES:
HYBRID,
SOFT, AND
RIGID

30’’

TO COMBINE
WITH 1. Shake the bottle before use. TO COMBINE
LCS PEROX, WITH
LCS SALINE 2. 
Immediately after removal of the lenses,
clean them with a few drops of cleaner. LCS ENZYM OR
OR LCS GP LCS CLEAN
3. 
Rub the lens gently between the palm of your hand
and your finger during 30 seconds.
4. A
 fter cleaning, rinse both sides of the lens with
a clean multipurpose contact lens or rinsing solution.

Recommendation: Do not use when tamper-evident seal is broken

before the first time use. Unscrewing the cap from the bottle will
break the tamper-evident seal.

1. 
Fill your habitual lens case with LCS Saline solution, 1. Fill the lens case up to the mark with LCS Perox Solution.
or LCS GP or LCS Perox. 2. Place the lenses in their respective lens holders.
2. Place an LCS Enzym tablet into the lens case. 3. Add one tablet in the lens case and screw the lid on.
3. 
Insert both contact lenses into their respective lens holders 4. Shake the lens case for a few seconds.
and screw on the lid.
Wait at least 2 hours, and not more than 24 hours for the cleaning,
5. 
4. 
Maintain the lenses submerged inside the lens case disinfection and neutralisation process to conclude.
for at least 2 hours, and not more than 24 hours. When completed, the solution become lightly green.
5. 
Remove the lenses from lens case and rinse them thoroughly 6. Shake the lens case for a few seconds.
with LCS Saline solution, or the LCS GP solution.
7. 
With your clean hands and without any traces of soap,
6. Repeat this cleaning process every week. remove your lenses from the compartments.
1
FOR ALL Empty the solution out of the lens case.
8. 
TYPES OF Keep the empty lens case closed when not in use.
CONTACT
LENSES: 1 2 1 2
UNIDOSE
1. 
Open an unidose by pulling
on the upper tab.
2. 
Once the cleaning process
2 and whenever necessary,
take the lens and place it
on the palm of your hand.
3 4 3 4
3. 
Rinse thoroughly with 10’’
abundant solution and
gently rub the lens between
your fingertips.
3 4. 
After rinsing, place the lens 2H
directly in your eye.

5 5 6
Recommendation: 10’’
After one use, discard the vial
and any leftover solution to avoid
contamination.
2H
 1 2

3 4

5 6

4H

TO COMBINE
WITH 1. Remove the lens and place it on the palm of your hand.
LCS ENZYM OR 2. 
Rub both sides of the lens for a few seconds
LCS CLEAN
with a few drops of the solution.
3. Rinse the lens with LCS GP solution.
4. 
Place each lens in their respective lens holders and fill the case
with the same solution.
Keep lenses at least four hours (or overnight) in the solution
5. 
to grant an adequate disinfection.
6. Rinse the lens with LCS GP before insertion.
7. Keep your lens case clean and be sure to replace the solution daily.

SAVE TIME AND REDUCE DELIVERY TIMES!

Order your lenses, products and accessories
in a wink with the ordering software

Conception et réalisation STUDIO C-COMME www.c-comme.net Crédit photos : D.R. - V1 02/24

Order
taking

Access
to rates

Shipment
tracking

Access
to training

Follow us on @laboratoire_lcs Laboratoire LCS

W W W.L A B OR ATOIR E -LC S .C OM

Legal notices: LCS GP, LCS Saline, LCS Perox and LCS Enzym products are
manufactured by AVIZOR SA and carry the CE0318 mark. LCS Clean is manufactured
by OTE PHARMA SOL B.V. It bears the CE0344 mark. These products are class II b 14 place Gardin
medical devices for contact lenses. Please read the instructions for use before use. 14000 Caen - France
These medical devices are not covered by health insurance. Last update : 04/2024 [email protected]