Scribd
Upload
69 views1 page

Manual Flir Jcu 3 Template 87283-2

Uploaded by

darz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Manual Flir Jcu 3 Template 87283-2

Uploaded by

darz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RMK-10 / JCU-3 Keypad Mounting Template

3.5 mm
(0.14 in) radius,
4 locations

Drill pilot hole,


4 locations

56.6 mm (2.2 in) Flush mount rebate


55 mm (2.2 in) Actual unit
41 mm (1.6 in) Cut out

41 mm (1.6 in) Cut out


43 mm (1.7 in)
5 mm
(0.2 in) radius,
4 locations

119 mm (4.7 in) Cut out


9.5 mm (0.37 in)
121 mm (4.8 in)
Flush mount rebate
132.9 mm (5.2 in) Actual unit

134.5 mm (5.3 in) Flush mount rebate

Surface mount Flush mount

NOTE: This document may not print true to scale.


Remove material from shaded area.
1. Remove material from shaded area. Before modifying mounitng surface, ensure printed
2. Rebate hatched area to a depth of 8 mm.. template matches the measurements provided.

Document number: 87283-2


Date: 03-2017 D13611-2

You might also like