Physics 33
Physics 33
2
PART – B
III. Answer any FIVE of the following questions: 5 × 2 = 10
21. Mention any two properties of equipotential surfaces.
Ans i) For any charge configuration, equipotential surface through a point is normal to the electric field
at that point.
ii) Work done to move a charge on an equipotential surface is zero.
2
iii) The equipotential surfaces corresponding to different potentials will be (a) very close in case
of strong field and (b) far apart in case of weak field.
iv) Two equipotential surfaces do not intersect Any 2 properties
22. Write the expression for the magnitude of force experienced by a charged particle moving in
a magnetic field and explain the terms.
Ans 1
The magnitude of force on a charged particle moving in a magnetic field is F= q v B sinθ
where, q is the charge on the particle, v is the speed of the particle, B is the magnetic field,
→ →
θ is the angle subtended by velocity vector ( v ) with magnetic field vector ( B )
( Explanation of any 2 terms) 1
→ → →
NOTE: Even if F = q( v× B) = q v B sinθ n̂ is written, mark must be awarded.
23. State and explain Gauss' law in magnetism.
Ans Statement: The net magnetic flux through any closed surface placed in magnetic field is zero. 1
Explanation: The magnetic field lines always form a closed loop. Therefore the total magnetic flux
→ → 1
through the closed surface Φ = B ⋅ ∆S = 0 OR
The isolated magnetic poles do not exist. Therefore the total magnetic flux through the closed surface
→ →
Φ = B ⋅ ∆S = 0
24. A coil of self inductance 2H is carrying a steady current of 1 A. Calculate the energy stored in
the coil.
Ans 1 2 1
Energy stored in the coil, U = LI
2
1 1
= x 2 x 12 = 1 J
2
25. What is a transformer? Mention its principle of working.
Ans Transformer is a device used to increase or decrease alternating voltage (i.e. to vary ac) 1
It works on the principle of mutual induction. 1
26. What are displacement currents and conduction currents?
Ans The current due to time varying electric field/flux is called displacement current. 1
OR A time varying electric field between the plates of a capacitor produces a current.
It is called as displacement current.
The current due to flowing charges is called conduction current. 1
27. Give any two uses of Polaroids.
Ans Polaroids are used i) to produce or analyse plane polarised light,
3
ii) to control the intensity of light in sunglasses, windowpanes, etc. and 2
iii) in photographic cameras and 3D movie cameras. Any 2 uses
28. Name the spectral series of hydrogen atom which lies in (i) visible region and (ii) ultraviolet
region.
Ans (i) Visible region : Balmer series 1
(ii) Ultraviolet region : Lyman series 1
29. Draw the schematic diagram of a nuclear reactor based on thermal nuclear fission and label
the parts.
Ans
Diagram 1
PART – C
IV. Answer any FIVE of the following questions: 5 × 3 = 15
30. State and explain Coulomb's law of electrostatics.
Ans Statement: The electrostatic force of attraction or repulsion between two stationary point charges 1
is directly proportional to the product of the magnitude of the two charges and inversely
proportional to the square of the distance between charges.
Explanation: If q1 and q2 are the two point charges at rest separated by a distance ‘r’, then by
Coulomb’s law.
q1q 2 1
Fα
r2
q1q 2
F=K
r2
1
Where, K is proportionality constant and K = for air/vacuum in SI system 1
4πε 0
1 q1q 2
OR F=
4πε 0 r2
31. Derive the expression J= oE.
Ans
By Ohm’s law, V = RI.
1
ρ L L
therefore V = I Because, R = ρ .
A A
I
OR V = ρL J (Q J = is the current density)
A
V V 1
OR = ρ J => E = ρ J (because = E )
L L
4
E 1 1
Therefore J = = σ E where, σ = is the conductivity of the material of the conductor.
ρ ρ
32. Explain the conversion of galvanometer into an ammeter with a circuit diagram.
Ans A galvanometer can be converted into an ammeter by
connecting a low resistance in parallel with it. 1
Circuit diagram 1
RG – resistance of galvanometer G.
rs – shunt resistance in parallel with the galvanometer. 1
R G rs
OR OR The resistance of the arrangement =
R G + rs
IG R G Ig G
OR Shunt resistance: rs = OR S=
I − IG I − Ig
34. Derive an expression for motional emf induced in a straight conductor moving perpendicular
to a uniform magnetic field.
Ans Labelled diagram (current not necessary in figure) 1
Magnetic flux enclosed by the loop PQRS is
φB =BAcos0 = Blx 1
dφB
Induced emf ε = −
dt
d dx
ε=− ( B l x ) = −B l = B l v
dt dt 1
(because –dx/dt = v)
35. What is meant by total internal reflection? Mention two uses of optical fibres.
Ans When light travelling from an optically denser medium to a rarer medium incident on the interface 1
at an angle greater than a particular angle (i.e. critical angle) is completely reflected back into the
same medium. This phenomenon is called the total internal reflection.
Uses of optical fibres
1) Optical fibres are used in communication for the transmission of signals.
2) Optical fibres are used in endoscopy. 2
6
PART – D
V. Answer any THREE of the following questions: 3 × 5 = 15
39. Derive an expression for the electric field at a point due to an infinitely long thin charged
straight wire using Gauss's law.
Ans Diagram with direction of electric field or field lines 1
The electric field is everywhere radial, flux through the two ends of the cylindrical Gaussian
surface is zero.
Let l → length of the cylinder and λ → linear charge density
The surface area of the curved part is 2πrl .
Magnitude of E is same through the curved surface of the cylinder.
The electric flux φ through the Gaussian surface is
φ = Electric field × area = E × 2πrl ……………. (1) 1
q 1
From Gauss’s law, electric flux: φ =
ε0
λl 1
The enclosed by Gaussian surface: q = λl then φ = …… (2)
ε0
λl
From equn(1) and (2) , E × 2πrl =
ε0
λ 1
Thus, the electric field: E =
2πε 0 r
40. Derive an expression for the effective emf and effective internal resistance of two cells
connected in parallel.
Ans Let us consider the parallel combination of two
cells with positive terminals connected to B1 and
negative terminals connected B2. E1, E 2 are the
emf’s of the two cells and r1, r2 their internal 1
resistances, respectively. I1 and I2 are the currents
leaving the positive electrodes of the cells.
Since as much charge flows in as out, we have I = I1 + I2
Let V (B1) and V (B 2) be the potentials at B1 and B2, respectively.
Then, considering the first cell, the potential difference across its terminals is
E1 − V
V=V (B1) – V (B2) = E1 – I1 r1 I1=
r1
1
Similarly for the second cell, the potential difference across its terminals is
E2 − V
V=V (B1) – V (B2) = E2 – I2 r2 I2=
r2
E1 − V E2 − V E1 E2 1 1
Therefore, I = + = + - V +
r1 r2 r1 r2 r1 r2 1
E1 r2 + E 2 r1 r1r2
V= − I ……(1)
r1 + r2 r1 + r2
If the combination of cells is replaced by a single cell of emf Eeq and 1
internal resistance req, then V = Eeq – I req …………(2)
E1 r2 + E2 r1 r1r2
From equations (1) and (2), Eeq = and req = 1
r1 + r2 r1 + r2
41. Derive an expression for magnetic dipole moment of an electron revolving in hydrogen atom.
Ans According to Bohr model of hydrogen and hydrogen like atoms, the negatively charged electron
revolves round the nucleus of charge +Ze. Let ‘r’ be the radius of the orbit, ‘v’ be the constant
speed with which electron is revolving and ‘T’ be the period of revolution of the electron.
e
The current associated with revolving electron, I = --- (1) 1
T
2π r 1
The period of revolution of the electron is given by T = ---(2)
v
ev 1
∴I = ---(3)
2π r
The magnetic moment associated with the orbital motion which is equivalent to a current loop is
1
given by μl = I A
ev evr
= × π r2 = --- (4)
2π r 2 1
(The derivation of expression for magnetic moment in terms of angular momentum
considering following steps not compulsory)
The magnitude of angular momentum of revolving electron is given by
l
l = me v r or vr = --- (5) Where, me mass of the electron
me
el
∴μ l = --- (6)
2me
42. Derive Lens Maker's formula.
Ans O be a point object placed on the principal axis of a thin
convex lens of focal length ‘f ’. n1 be the RI of the
medium in which object is present and n2 be the RI of 1
the material of the lens.
8
n1 n (n − n 1 ) (n 2 − n 1 ) 1
Equation (1) + (2) gives, + 1 = 2 -
-u v R1 R2
1 1 1 1 1 1 n 1 1
n1 + = (n 2 − n 1 ) - + = ( 2 − 1) -
-u v R1 R2 - u v n1 R1 R2
1 1 n 1 1
If u = ∞ then v = f. Therefore + = ( 2 − 1) -
- ∞ f n1 R1 R 2
1 n2 1 1 1 1 1
= − 1 - OR = (n 21 − 1) - This is lens maker’s formula. 1
f n1 R1 R2 f R1 R2
43. (i) Give Einstein's explanation of photoelectric effect. (3)
(ii) Mention any two properties of photons. (2)
Ans (i) Albert Einstein proposed a new picture of electromagnetic radiation to explain photoelectric
effect. According to him, photoelectric emission does not take place by continuous absorption of 1
energy from radiation. Radiation energy consists of discrete units called quanta of energy of
radiation. Each quantum of radiant energy or photon has energy hν, where h is Planck’s constant and 1
ν the frequency of light.
In photoelectric effect, an electron absorbs a photon of energy (hν) of radiation. If the energy
absorbed exceeds the minimum energy needed for the electron to escape from the metal surface (i.e.
1
work function φ0), the electron is emitted with maximum kinetic energy (Kmax).
(ii) Properties of photons
(a) In interaction of radiation with matter, radiation behaves as if it is made up of particles called
photons.
(b) Each photon has energy E = hν where ν is the frequency, momentum p = hν/c where c is the
2
speed of light.
(c) All photons of light of a particular frequency (ν), or wavelength (λ), have the same energy and
momentum. The photon energy is independent of intensity of radiation.
(d) Photons are electrically neutral and are not deflected by electric and magnetic fields.
(e) In a photon-particle collision (such as photon-electron collision), the total energy and total
momentum are conserved. However, the number of photons may not be conserved in a collision.
Any 2 properties
44. (i) What is a rectifier? (1)
(ii) Draw the circuit diagram and input-output waveforms of a half wave rectifier. (2)
(iii) Explain the working of a half wave rectifier. (2)
Ans The device which converts ac into dc is called a rectifier. 1
9
1
During +ve half cycle of AC input the diode (D) is forward biased and hence it conducts. 1
But during the –ve half cycle of AC input, the diode is reverse biased and hence it does not conduct. 1
So the current flows through the load only during one half cycle of AC input. Hence the name half
wave rectifier. The current flowing through the RL is a rectified output in the form of pulsating D.C.
VI. Answer any TWO of the following questions: 2 × 5 = 10
45. Two capacitors of capacitances 3μF and 7μF are connected in series and the combination is
connected to a source of emf 10V. Calculate the effective capacitance of the combination. Also
find the potential difference across each capacitor.
Ans C1 C2
To find CS: Effective capacitance of series combination, CS = 1
C1 + C2
3 x10-6 x 7x10-6
= = 2.1 µ F 1
( ) ( )
3x10- 6 + 7 x10 -6
1
To find V1 and V2: Charge stored in the combination, Q = CS V = 2.1 x 10 -6 x 10 = 21 x 10 -6 C
Q 21 x 10 −6
Potential difference across 1 st capacitor, V1 = = = 7V 1
C1 3 x 10-6
Q 21 x 10−6
Potential difference across 2 nd capacitor, V2 = = = 3V 1
C2 7 x 10- 6
Alternate method to find V1 and V2
In series combination V1 : V2 = C2 : C1 = 7 : 3
7
V1 = x 10 = 7 V
10
3
V2 = x 10 = 3 V
10
46. Calculate the current through the galvanometer in the following network.
10
Ans
Impedance: Z = R 2 + ( X L − X C )2
1
2 2
= 50 + ( 471 − 91) = 383.27 Ω ≈ 383 Ω 1
R 50
Power factor, cos φ = = = 0.13
Z 383.27 1
48. In a Young's double slit experiment, the slits are separated by 0.28 mm and the screen is placed
1.4 m away. The distance between the central bright fringe and the fourth bright fringe is
measured to be 1.2 cm. Determine the wavelength of light used. Also find the distance of fifth
dark fringe from the central bright fringe.
Ans nλD 1
i) Distance of nth bright fringe, (xn)B =
d
( xn ) B d 1.2x10-2 x 0.28 x 10-3 1
=> λ = = = 0.6x10− 5 m = 6000 x 10-10 m
nD 4 x 1.4
(2n - 1)λD 1
ii) Distance of nth dark fringe, (xn)D =
2d
(2 x 5 - 1) x 6000 x 10-10 x 1.4 1
Distance of 5th dark fringe, (x5)D =
2 x 0.28 x 10-3
9 x 6000 x 10-10 x 1.4 1
= = 13.5 × 10−3 m
2 x 0.28 x 10- 3
(2n + 1)λD
OR If the formula (xn)D = is used, then for 5th dark fringe n=4
2d
Note: Any other alternate correct method/answer should be considered.
11