Contents

Enclosures

Introduction Klippon TB MH - Multi Hinge Klippon TB QL - Quarter Lock Klippon TB - System accessories Klippon STB - Sheet steel enclosures Klippon K - Aluminium enclosures Klippon POK - Polyester enclosures TBF - Polyester enclosures MPC - Polycarbonate enclosures FPC - Polycarbonate enclosures

B.2 B.10 B.36 B.61 B.62 B.72 B.94 B.114 B.122 B.130

B.1

Enclosures

Enclosures

Introduction

Enclosures

Metal enclosures

Klippon TB MH

Material Material Specification

Stainless steel Stainless steel 1.4404 (316L) 1.50 mm very good very good x x electropolished Explosive hazard areas, offshore, oil and gas industry, chemical industry, process industry

Klippon TB QL

Stainless steel Stainless steel 1.4404 (316L), enclosure 1.50 mm very good very good x x electropolished Explosive hazard areas, offshore, oil and gas industry, chemical industry, process industry

Sea water resistance UV resistance Free from halogens Cadmium free Surface finish Intended use

Stainless steel Stainless steel 1.4404 (316L) 1.50 mm very good very good x x electropolished, Mirror-polish

Klippon STB

Sheet steel Powder-coated steel sheet 1.0330 good powder-coated x x powder-coated

Aluminium High quality aluminium alloy (Al-Si12) good very good x x neutral, powder-coated Ex-areas, process industry, transport, railways, shipping, port facilities, packaging, mechanical engineering

Klippon K

Ex areas, Packing industry, packing industry, railways, shipping, railways, shipping, process industry process industry

Dimensions L x W x H (min.) in mm L x W x H (max) in mm Geometry Specific characteristics Gland plates Type of gasket Seal material Enclosure attachment Installation mounting

229x152x133 987x740x200 3 standard depths

229x152x133 987x740x200 3 standard depths

120x120x80 250x400x130 5 standard depths Ex-version Industrial version none Flat gasket Silicone External holders with 8 mm holes 20 mm C-rail welded to the enclosure none Flat gasket Silicone External holders with 8 mm holes 20 mm C-rail welded to the enclosure

50x45x30 230x280x111 11 standard depths Ex-version Industrial version none Shaped gasket Silicone 4 holes for M4 to M6 screws M4 to M6 threaded holes none Shaped gasket Chloroprene, Silicone 4 holes for M4 to M6 screws M4 to M6 threaded holes

0,1,2,3,4 Flat gasket Silicone 4 mounting feet with 11 mm hole size 4 or 6 mounting bolts with M6 threaded holes

0,1,2,3,4 Flat gasket Silicone 4 mounting feet with 11 mm hole size 4 or 6 mounting bolts with M6 threaded holes

Temperature range Impact resistance IP - protection class Flammability rating Surface resistance (in ohms) Approvals ATEX - EN60079-7 Increased safety - EN60079-11 Intrinsic safety IECEx - IEC60079-7 Increased safety - IEC60079-11 Intrinsic safety GOST Ex GOST cULus UL German Lloyd Lloyds Register Russian Maritime Register CCOE Configuration

-60 C+135 C 10 J Industrial applications 7 J ATEX applications IP 66, IP 67

-60 C135 C 10 J Industrial applications 7 J ATEX applications IP 66

-60 C100 C 7J IP 66

-60 C120 C 10 J IP 66

-50 C135 C -40 C+80 C (CR); -50 C+135 C (VMQ) 7J 10 J IP 66, IP 67 and IP 66, IP 67, IP68 Nema 4X and Nema 4X

x x x x x x x * x x x * Lid hinges Removable lid Gland plates Welded mounting feet Fitting for a padlock

x x x x x x x * x x x

x x x

x x x

x x x x x *

x x x x x x

* x

Lid hinges Gland plates Welded mounting feet Quarter lock

TAS 20 C-profile rail Welded mounting feet Earth studs in enclosure lid and base

Internal earthing internal earthing screw in the screw in the enclosure base enclosure base an external earth stud

* Approvals are pending

B.2

Introduction

Material Material Specification

Polyester Glass-fibre reinforced polyester in accordance with DIN 16913

Klippon POK

TBF

MPC

FPC

Polyester Glass-fibre reinforced polyester, polycarbonate transparent cover very good good x x grey Building installation, transportation, energy production, building sites, manufacturing industry, packaging industry

Polycarbonate

Polycarbonate

Sea water resistance UV resistance Free from halogens Cadmium free Surface finish Intended use

very good good x x Grey (industrial version), Black (Ex version) Ex-areas, energy production, transportation, process industries, port facilities

very good good x x grey Building installation, transportation, energy production, building sites, manufacturing industry, packaging industry

very good good x x grey Building installation, transportation, energy production, building sites, manufacturing industry, packaging industry

Dimensions L x W x H (min.) in mm L x W x H (max) in mm Geometry Specific characteristics Gland plates Type of gasket Seal material Enclosure attachment Installation mounting

75x80x55 250x400x160 6 standard depths Ex version Industrial version (Black) (grey) none none O-ring Silicone 4 holes for M4 to M6 screws M4 to M6 threaded holes O-ring Chloroprene 4 holes for M4 to M6 screws M4 to M6 threaded holes

186x151x139 603x603x175/210 3 standard depths

125x75x75 250x175x150 4 standard depths

200x200x130 600x400x130 1 standard depth

none O-ring Polyurethane 4 holes or external mounting brackets (accessory) 4 or 6 clamping screws M4

none Foam seal Polyurethane 4 holes or external mounting brackets (accessory) Self-tapping screws

none Foam seal Polyurethane 4 holes or external mounting brackets (accessory) Self-tapping screws

Temperature range Impact resistance IP - protection class Flammability rating Surface resistance (in ohms) Approvals ATEX - EN60079-7 Increased safety - EN60079-11 Intrinsic safety IECEx - IEC60079-7 Increased safety - IEC60079-11 Intrinsic safety GOST Ex GOST cULus UL German Lloyd Lloyds Register Russian Maritime Register Configuration

-55 C+100 C -40 C+90 C 7J IP 66 UL94 V0 <10^9 x x 7J IP 66 UL94 V0 10^12

-50 C+150 C (grey); -50 C+130 C (transparent) 4 J (grey lid) 7 J (transparent lid) IP 66 (transparent lid) IP 67 (grey lid) UL94 HB (grey lid) V2 (transparent lid) 10^12

-50 C+130 C 7J IP 66, IP 67 V2 10^16

-50 C+130 C 7J IP 66, IP 67 V2 10^16

x x

x x

x x x grey or transparent lid grey or transparent lid grey or transparent lid

Fastening screws for the mounting plate

* Approvals are pending

B.3

Enclosures

Plastic enclosures

Introduction

Enclosures

Overview of dimensions

Klippon TB MH Multi Hinge / Klippon TB QL Quarter Lock

Dimensions [mm] Height x width x depth Weight [g] 1 gland plate 3060 4840 5620 5960 6800 5780 6700 7200 7900 9000 10240 11900 12420 8500 11060 12800 14240 2 gland plates 3360 5510 6400 6580 7720 6700 7700 8300 9200 9900 10830 13800 15900 9500 11500 14100 15830 3 gland plates 3740 5780 6840 7060 8320 7600 8380 8380 10400 10700 12500 15200 17700 10800 13800 15600 17360

Page B.10
4 gland plates 4060 6680 8200 7660 9180 9700 10100 11100 11300 12700 14110 17600 16080 12100 14720 17100 20350

229 x 152 x 133 260 x 260 x 150 260 x 260 x 200 306 x 306 x 150 306 x 306 x 200 350 x 260 x 150 350 x 260 x 200 400 x 300 x 150 400 x 300 x 200 458 x 382 x 150 458 x 382 x 200 480 x 480 x 150 480 x 480 x 200 550 x 350 x 150 550 x 350 x 200 620 x 450 x 150 620 x 450 x 200

762 x 508 x 150

17100

18600

19700

20800

762 x 508 x 200

18120

19800

21200

22700

914 x 610 x 150

20700

22200

24100

26000

914 x 610 x 200

23840

24600

26400

28200

980 x 740 x 200

34800

36300

36100

39900

Note:

Additional enclosure sizes available on request. The weights given are net weights. Enclosures without gland plates are available on request.

B.4

Introduction

Klippon STB
Dimensions [mm] Height x width x depth 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 1.4404 (316L), mirror polished 1.4404 (316L), electropolished MS RAL 7032 190 x 150 x 90 120 x 120 x 80

Page B.62
Weight [g] 1250 1220 1277 1451 1380 1380 1708 1734 1765 2006 2080 2081 2433 2407 2468 250 x 250 x 120 3912 3850 4013 3961 3960 3974 5714 5700 5859

Klippon K
Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Dimensions [mm] Height x width x depth 80 x 125 x 57

Page B.72
Weight [g] 472 446 466 471 500 454.6 452 469.2 600 569.6 576.6 583.2 874 784 794 752.8 663 633 644 669 986 935 955 938 1432 1386 1420 1616 1428 1423 1399 1411 1699 1676 1613 1616 1872 1800 1820 2080 2249 2160 2240 2150 2863 2828 3116 3094 3420 3377 3395 3274

150 x 120 x 80

70 x 165 x 45

150 x 150 x 90

80 x 175 x 57

80 x 250 x 55

190 x 190 x 100

82 x 130 x 72

120 x 122 x 81

160 x 380 x 120

250 x 400 x 130

130 x 170 x 90

The weights given are net weights. MS: Mild steel, Stainless steel 1.4404 (316L).

120 x 220 x 81

160 x 160 x 91

Klippon K
Dimensions [mm] Height x width x depth Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) Unpainted Ex (S) Unpainted (CR) RAL 7001 (CR) RAL 7001 (S) The weights given are net weights. 45 x 50 x 30

Page B.72
Weight [g] 89 78.4 79.2 83.6 184 148.1 153.6 149.4 254 207 211.17 217 272 247.5 251.5 255.9 328 318 322 319.6 319 314.4 309.9 316

160 x 200 x 100

160 x 260 x 91

64 x 58 x 34

160 x 350 x 100

64 x 98 x 34

230 x 280 x 111

70 x 70 x 45

80 x 75 x 57

70 x 100 x 45

The weights given are net weights.

B.5

Enclosures

Introduction

Enclosures

Overview of dimensions

Klippon POK
Dimensions [mm] Height x width x depth RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 RAL 7001 RAL 9011 75 x 80 x 56

Page B.94
Weight [g] 273 289 345 350 450 461 499 530 612 628 768 769 1094 1110 1302 1326 1771 1767 2210 2291 3327 3320 2817 2841

TBF
Dimensions [mm] Height x width x depth Grey lid (RAL 7035) Transparent lid 186 x 151 x 140

Page B.114
Weight [g] 1061 810

75 x 110 x 56

Grey lid (RAL 7035) Transparent lid

302 x 186 x 175

1857 1520

75 x 160 x 56

75 x 190 x 56

Grey lid (RAL 7035) Transparent lid

302 x 302 x 175

2420 2000

75 x 230 x 56

120 x 122 x 91

Grey lid (RAL 7035) Transparent lid

372 x 302 x 175

2829 2465

120 x 220 x 90

160 x 260 x 90

Grey lid (RAL 7035) Transparent lid

488 x 302 x 175 488 x 302 x 210

3688 3220

160 x 260 x 90

160 x 360 x 90

160 x 560 x 90

Grey lid (RAL 7035) Transparent lid

558 x 302 x 175 558 x 302 x 210

4420 3660

250 x 255 x 120

RAL 7001 RAL 9011

250 x 400 x 120

3693 3771

Grey lid (RAL 7035) Transparent lid

603 x 302 x 175 603 x 302 x 210

4900 3900

RAL 7001 RAL 9011

250 x 600 x 120

5420 5580

RAL 7001 RAL 9011

405 x 400 x 120

5740 5580 Grey lid (RAL 7035) Transparent lid 603 x 372 x 175 603 x 372 x 210 5000 5000

RAL 7001 RAL 9011

250 x 255 x 160

3458 3600

RAL 7001 RAL 9011

250 x 400 x 160

4390 4408

The weights given are net weights.

The weights given are net weights.

B.6

Introduction

TBF
Dimensions [mm] Height x width x depth Grey lid (RAL 7035) Transparent lid 603 x 605 x 175 603 x 605 x 210

Page B.114
Weight [g] 7220 7480

MPC
Dimensions [mm] Height x width x depth Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid Grey lid (RAL 7035) Transparent lid 125 x 75 x 75

Page B.122
Weight [g] 214

125 x 75 x 125

306 304 295 294 373 368 464 448 523 525 489 491 184 731 760 753

125 x 125 x 75

175 x 125 x 75

175 x 125 x 100

175 x 125 x 125

175 x 175 x 75

175 x 175 x 150

250 x 175 x 100

FPC
Dimensions [mm] Height x width x depth Grey lid (RAL 7035) Transparent lid 200 x 200 x 132

Page B.130
Weight [g] 1230 1260

Grey lid (RAL 7035) Transparent lid

200 x 300 x 132

1616 1589

Grey lid (RAL 7035) Transparent lid

200 x 400 x 132

2000 1984

Grey lid (RAL 7035) Transparent lid

300 x 300 x 132

2097 2103

Grey lid (RAL 7035) Transparent lid

300 x 400 x 132

2624 2620

Grey lid (RAL 7035) Transparent lid

400 x 600 x 132

3964 4500

The weights given are net weights.

The weights given are net weights.

B.7

Enclosures

Introduction

Enclosures

Drawing design For chapter B

The drawings contained in chapter B are constructed in the following way.

To identify the enclosure side views, these are marked with the letters A, B, C, D, E, and F. The schematic 3D representations shown underneath are of an enclosure that has been wallmounted. F shows the view of the enclosure lid (front aspect), E marks the inner surface of the enclosure (view into the enclosure when the lid has been opened). A shows the view of the enclosure from above and B the view of the enclosure from underneath. C shows the left and D the right side of the enclosure. E is the view from the front into the enclosures interior, without a lid. You can find the dimensions of the enclosure sides for all enclosure sizes in each drawing.

A = top B = bottom C = left D = right E = enclosure base F = enclosure lid

B.8

B.9

Enclosures

Klippon TB MH - Multi Hinge

Enclosures

Klippon TB MH - Multi Hinge

Stainless steel enclosures for use in industrial and in explosive hazard areas

The Klippon TB enclosure series features excellent performance characteristics, even under the most difficult environmental conditions, and also comply with the stricter requirements of explosive hazard areas found in the process or power generation industries. The new Klippon TB MH enclosure series offers further improvements to a product line that is already successfully leading the market. Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

"\

CCOE

Overview of enclosures Ordering data

Description KTB MH 221513 S4E_* KTB MH 262615 S4E_* KTB MH 262620 S4E_* KTB MH 303015 S4E_* KTB MH 303020 S4E_* KTB MH 352615 S4E_* KTB MH 352620 S4E_* KTB MH 403015 S4E_* KTB MH 403020 S4E_* KTB MH 453815 S4E_* KTB MH 453820 S4E_* KTB MH 484815 S4E_* KTB MH 484820 S4E_* KTB MH 553515 S4E_* KTB MH 553520 S4E_* KTB MH 624515 S4E_* KTB MH 624520 S4E_* KTB MH 765015 S4E_* KTB MH 765020 S4E_* KTB MH 916115 S4E_* KTB MH 916120 S4E_* KTB MH 987420 S4E_* Note Length x width x depth in mm 229 x 152 x 133 260 x 260 x 150 260 x 260 x 200 306 x 306 x 150 306 x 306 x 200 350 x 260 x 150 350 x 260 x 200 400 x 300 x 150 400 x 300 x 200 458 x 382 x 150 458 x 382 x 200 480 x 480 x 150 480 x 480 x 200 550 x 350 x 150 550 x 350 x 200 620 x 450 x 150 620 x 450 x 200 762 x 508 x 150 762 x 508 x 200 914 x 610 x 150 914 x 610 x 200 980 x 740 x 200 1 Gland Plate 2 Gland Plates 3 Gland Plates 4 Gland Plates Reference product (below) (above + below) (below + sides) (all sides) 1194560000 1194570000 1194580000 1194590000 Klippon TB10 1194610000 1194620000 1194630000 1194640000 Klippon TB10A 1194660000 1194670000 1194680000 1194690000 Klippon TB10A 1194710000 1194720000 1194730000 1194740000 Klippon TB11 1194760000 1194770000 1194780000 1194790000 Klippon TB11 1194810000 1194820000 1194830000 1194840000 Klippon TB11A 1194860000 1194870000 1194880000 1194890000 Klippon TB11A 1194910000 1194920000 1194930000 1194940000 1194960000 1194970000 1194980000 1194990000 1195010000 1195020000 1195030000 1195040000 Klippon TB12 1195060000 1195070000 1195080000 1195090000 Klippon TB12 1195110000 1195120000 1195130000 1195140000 Klippon TB12A 1195160000 1195170000 1195180000 1195190000 Klippon TB12A 1195210000 1195220000 1195230000 1195240000 Klippon TB12B 1195260000 1195270000 1195280000 1195290000 Klippon TB12B 1195310000 1195320000 1195330000 1195340000 Klippon TB12D 1195360000 1195370000 1195380000 1195390000 Klippon TB12D 1195410000 1195420000 1195430000 1195440000 Klippon TB13 1195460000 1195470000 1195480000 1195490000 Klippon TB13 1195510000 1195520000 1195530000 1195540000 Klippon TB14 1195560000 1195570000 1195580000 1195590000 Klippon TB14 1195610000 1195620000 1195630000 1195640000 * Placeholder for the number of gland plates (1, 2, 3, 4). Klippon TB MH enclosures are available without gland plates on request.

B.10

Klippon TB MH - Multi Hinge

Technical Overview Features

Available in 12 sizes and 3 standard depths Equipped with up to 4 gland plates The gasket is protected against compression Completely removable padlock tab Cover lock outside the sealed zone Improved temperature performance IP66/IP67 protection Lid can be removed without a tool Earth studs in enclosure cover and bottom section Welded mounting feet International approvals Note

Technical data
Enclosure material*** Surface finish IP protection class NEMA protection classes Gland plates Gland plate thickness Earthing inside Earthing outside Installation mounting Enclosure attachment Lid opening Cover attachment Equipped for a padlock Impact resistance Gasket material Operating temperature range* Torque - lid and gland plate screws** Note Stainless steel 1.4404 (316L) 1.5 mm electropolished IP66 / IP67 3, 4x, 12 1 - 4 (fixed with M6 hexagon head screws with 10 mm heads), optionally without a gland plate 3 mm (other thickness of up to 20 mm are available on request) Enclosure base and lid: welded M6 stainless steel earth studs Continuous M10 brass earth stud (optionally with stainless-steel earth stud) 4 or 6 mounting bolts with M6 threaded holes to attach the mounting plate or mounting rail 4 welded mounting feet with 11-mm holes (2 slotted and 2 cross-shaped openings) Lid can be fully removed without the use of tools, can be fitted on both sides, lid opening angle: 130 4 hinges and M6 hex-head screws(AF 10) with slot Removable padlock fitting, for additional product security with an optional padlock (article number: 0905680000) 7 J ATEX applications, 10 J industrial applications Silicone -60 C+135 C 2.5 Nm *Limited to IP66 protection when used in temperatures greater than 105C. ** To secure the lid, please use our hexagonal socket wrench with a 10 mm socket (9009070000) *** Painted steel enclosures are available on request.

Approvals for empty enclosures

ATEX certificate ATEX marking IECEx certificate IECEx marking GOST Ex GOST R cULus Germanischer Lloyd Russian Maritime Register CCOE Note KEMA 10ATEX0046 U II 2 G Ex e llC Gb II 2 D Ex tb lllC Db IP66/67 IECEx KEM 10.0015U Ex e IIC Gb Ex tb IIIC Db IP66/67 POCC DE.ME92.B02036 In preparation E243298 11533 - 10 HH 10.04093.250 P267536/2 The Klippon TB MH enclosure series can be pre-fitted in our customer specific production department according to your wishes; as an example, terminals, or other approved components, can be installed as required.

Approvals for control and distribution box

ATEX certificate ATEX marking KEMA 10ATEX0050 II 2 G Ex eb IIC T6...T4 II 1 G Ex ia IIC T6...T4 II 2(1) G Ex eb ia IIC T6...T4 II 2 D Ex tb lllC T85 C...T135 C IP66/67 IECEx KEM 10.0019 Ex eb IIC T... Ex ia IIC T... Ex eb ia IIC T... Ex tb IIIC T85 CT135 C IP66/67 Labelling depends on the application layout. Limited to IP66 protection when used in temperatures greater than 105 C.

IECEx certificate IECEx marking

Note

B.11

Enclosures

Enclosures

B.12

Klippon TB MH - Multi Hinge

Klippon TB MH 221513

Depth

133 mm Enclosures

M10 internal/external ground connection 64 100

116 146 178/208 152 100 64 M6 internal ground connection

11

15

B
55 View without cover, seal and screw 15

152 229 110 133

177 147

93 75

Height/Width/Depth

229 / 152 / 133 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194560000 1194570000 1194580000 1194590000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193930000 1193810000 vertical 1x29 horizontal 1x15 1x13 1x9 1x7 1x6

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 6 5 2 2 1 1 0 0 0 C/D 8 6 3 2 2 2 0 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

91.00 75.00

158.00 174.00

Note

System accessories can be found after the Klippon TB QL product pages.

158 176

B.13

Klippon TB MH - Multi Hinge

Klippon TB MH 262615 Enclosures

Depth

150 mm

View without cover, seal and screw

201 183

81 117

224 254

B
11

286/316 260

117 81

170 260

208

178

127

150

M10 internal/external ground connection

15

M6 internal ground connection

Height/Width/Depth

260 / 260 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194610000 1194620000 1194630000 1194640000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193950000 1193820000 vertical 2x35 1x30 1x22 1x18 1x15 horizontal 2x34 1x29 1x22 1x17 1x14

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 20 11 9 4 3 3 2 0 0 C/D 15 8 7 3 2 2 2 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

199.00 183.00

189.00 205.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.14

15

64

189

207

Klippon TB MH - Multi Hinge

Klippon TB MH 262620

Depth

200 mm Enclosures

View without cover, seal and screw

201 183

131 167

214 250

286/316 260
11

167 131

189

207

170 260

204 168 126.5

177

200

M10 internal/external ground connection

15

M6 internal ground connection

Height/Width/Depth

260 / 260 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194660000 1194670000 1194680000 1194690000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193950000 1193820000 vertical 2x35 1x30 1x22 1x18 1x15 horizontal 2x34 1x29 1x22 1x17 1x14

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 33 22 14 12 6 5 2 2 1 C/D 25 16 11 9 4 4 2 1 1

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

199.00 183.00

189.00 205.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.15

Klippon TB MH - Multi Hinge

Klippon TB MH 303015 Enclosures

Depth

150 mm

View without cover, seal and screw

247 229

117

81

270 300 332/362 306

B
11

117 81

203 306

254 224

127

150

M10 internal/external ground connection M6 internal ground connection

15

64

235 253

Height/Width/Depth

306 / 306 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194710000 1194720000 1194730000 1194740000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193960000 1193830000 vertical 2x44 2x37 2x28 1x22 1x19 1x14 horizontal 2x43 2x36 2x27 1x22 1x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 24 13 11 5 4 3 3 0 0 C/D 20 11 9 4 3 3 2 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

245.00 229.00

235.00 251.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.16

15

Klippon TB MH - Multi Hinge

Klippon TB MH 303020

Depth

200 mm Enclosures

View without cover, seal and screw

247 229

131 167

260 296

332/362 306

167 131

235 253

11

203 306

250 214

126.5

177

200

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

306 / 306 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194760000 1194770000 1194780000 1194790000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193960000 1193830000 vertical 2x44 2x37 2x28 1x22 1x19 1x14 horizontal 2x43 2x36 2x27 1x22 1x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 40 26 17 14 8 6 3 2 2 C/D 33 22 14 12 6 5 2 2 1

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

245.00 229.00

235.00 251.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.17

Klippon TB MH - Multi Hinge

Klippon TB MH 352615 Enclosures

Depth

150 mm

View without cover, seal and screw

201 183

81 117

224 254

B
11

286/316 260

117 81

350

250

298

268

127

150

Height/Width/Depth

350 / 260 / 150 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194810000 1194820000 1194830000 1194840000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193970000 1193840000 vertical 2x53 1x44 1x33 1x27 1x22 horizontal 2x34 2x29 2x22 2x17 1x14 1x11

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 20 11 9 4 3 3 2 0 0 C/D 23 13 11 5 4 3 3 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

199.00 183.00

279.00 295.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.18

15

M10 internal/external ground connection

15

64

279 297

Klippon TB MH - Multi Hinge

Klippon TB MH 352620

Depth

200 mm Enclosures

View without cover, seal and screw

201 183

131

167

214 250

286/316 260

279 297

167 131

11

350

250

294

258

126.5

177

Height/Width/Depth

350 / 260 / 200 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194860000 1194870000 1194880000 1194890000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193970000 1193840000 vertical 2x53 1x44 1x33 1x27 1x22 horizontal 2x34 2x29 2x22 2x17 1x14 1x11

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 33 22 14 12 6 5 2 2 1 C/D 38 26 17 14 7 6 3 2 2

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

199.00 183.00

279.00 295.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

M10 internal/external ground connection

200

15

B.19

Klippon TB MH - Multi Hinge

Klippon TB MH 403015 Enclosures

Depth

150 mm

View without cover, seal and screw 241 223

264 294 326/356 300 117 81

B
11

247 400

81 117

348 318

127

150

15

64

329 347

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

400 / 300 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194910000 1194920000 1194930000 1194940000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193980000 1193850000 vertical 2x62 2x52 1x39 1x32 1x26 1x20 horizontal 3x42 3x35 2x26 2x21 2x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 23 13 11 5 4 3 3 0 0 C/D 29 16 13 6 5 4 3 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

239.00 223.00 7

329.00 345.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.20

15

Klippon TB MH - Multi Hinge

Klippon TB MH 403020

Depth

200 mm Enclosures

View without cover, seal and screw 241 223

131 167

254 290 326/356 300

167 131

329 347

11
247 400 344 308

126.5

177

200

15

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

400 / 300 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1194960000 1194970000 1194980000 1194990000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193980000 1193850000 vertical 2x62 2x52 1x39 1x32 1x26 1x20 horizontal 3x42 3x35 2x26 2x21 2x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 38 26 17 14 7 6 3 2 2 C/D 48 32 20 17 9 7 3 3 2

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

239.00 223.00 7

329.00 345.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.21

Klippon TB MH - Multi Hinge

Klippon TB MH 453815 Enclosures

Depth

150 mm

View without cover, seal and screw 323 305

117

81

346 376

B
11

408/438 382

117 81

305 458

406 376

127

150

15

64

387 405

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

458 / 382 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195010000 1195020000 1195030000 1195040000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193990000 1193860000 vertical 3x73 2x62 2x46 2x37 2x31 1x23 horizontal 4x58 3x48 3x36 2x29 2x24 1x18

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 30 17 15 6 5 4 4 0 0 C/D 33 19 16 7 6 5 4 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

321.00 305.00 7

387.00 403.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.22

15

Klippon TB MH - Multi Hinge

Klippon TB MH 453820

Depth

200 mm Enclosures

View without cover, seal and screw 323 305

131

167

336 372

408/438 382

167 131

387 405

11
305 458 402 366

126.5

177

200

15

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

458 / 382 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195060000 1195070000 1195080000 1195090000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193990000 1193860000 vertical 3x73 2x62 2x46 2x37 2x31 1x23 horizontal 4x58 3x48 3x36 2x29 2x24 1x18

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 50 34 23 18 10 8 4 3 2 C/D 55 38 24 21 11 9 4 3 3

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

321.00 305.00 7

387.00 403.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.23

Klippon TB MH - Multi Hinge

Klippon TB MH 484815 Enclosures

Depth
View without cover, seal and screw 421 403

150 mm

444 474

B
11

506/536 480

117

81

117 81

327 480

428 398

127

150

15

64

M6 internal ground connection 15

M10 internal/external ground connection

Height/Width/Depth

480 / 480 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195110000 1195120000 1195130000 1195140000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194000000 1193870000 vertical 4x78 3x65 3x49 2x39 2x33 1x25 horizontal 4x77 3x64 3x48 3x39 2x32 2x24

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 39 22 19 8 7 6 5 0 0 C/D 36 20 17 7 6 5 4 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

419.00 403.00 7

409.00 425.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.24

409 427

Klippon TB MH - Multi Hinge

Klippon TB MH 484820

Depth
View without cover, seal and screw 421 403

200 mm Enclosures
409 427

131 434 470 506/536 480

11

167

167 131

327 480

424 388 126.5

177

200

15 M6 internal ground connection 15

M10 internal/external ground connection

Height/Width/Depth

480 / 480 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195160000 1195170000 1195180000 1195190000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194000000 1193870000 vertical 4x78 3x65 3x49 2x39 2x33 1x25 horizontal 4x77 3x64 3x48 3x39 2x32 2x24

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 65 44 29 24 13 11 5 4 3 C/D 60 40 26 21 12 10 4 4 3

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

419.00 403.00 7 409.00 425.00 Note
System accessories can be found after the Klippon TB QL product pages.

B.25

Klippon TB MH - Multi Hinge

Klippon TB MH 553515 Enclosures

Depth

150 mm

View without cover, seal and screw 291 273

314 344

B
11

376/406 350

117

81

117 81

350 550

498 468

127

M10 internal/external ground connection

150

15

64

Height/Width/Depth

550 / 350 / 150 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195210000 1195220000 1195230000 1195240000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194010000 1193880000 vertical 2x91 2x76 2x58 2x46 1x39 1x29 horizontal 4x52 4x43 4x32 3x26 3x22 2x16

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 27 15 13 6 5 4 3 0 0 C/D 42 24 20 9 7 6 5 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

289.00 273.00 7

479.00 495.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.26

15

479 497

Klippon TB MH - Multi Hinge

Klippon TB MH 553520

Depth

200 mm Enclosures
479 497

View without cover, seal and screw 291 273

131 304 340 376/406 350

167

167 131

11
494 458 126.5

350 550

M10 internal/external ground connection

177

200

15

Height/Width/Depth

550 / 350 / 200 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195260000 1195270000 1195280000 1195290000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194010000 1193880000 vertical 2x91 2x76 2x58 2x46 1x39 1x29 horizontal 4x52 4x43 4x32 3x26 3x22 2x16

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 45 30 20 17 9 7 3 3 2 C/D 70 48 30 26 14 12 5 4 3

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

289.00 273.00 7

479.00 495.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.27

Klippon TB MH - Multi Hinge

Klippon TB MH 624515 Enclosures

Depth

150 mm

View without cover, seal and screw 391 359

414 444 476/506 450 117 81

117

81

11

450 620

568 538

127

150

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

620 / 450 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195310000 1195320000 1195330000 1195340000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194020000 1193890000 vertical 3x105 3x88 3x66 2x53 2x44 1x33 horizontal 5x71 5x59 4x45 4x36 3x30 2x22

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 38 21 18 8 6 5 4 0 0 C/D 48 27 24 10 9 7 6 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

389.00 359.00

535.00 565.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.28

15

64

535 567

Klippon TB MH - Multi Hinge

Klippon TB MH 624520

Depth

200 mm Enclosures
535 567

View without cover, seal and screw 391 359

404 440 476/506 450

131 167

167 131

11

450 620

564 528

126.5

177

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

620 / 450 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195360000 1195370000 1195380000 1195390000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194020000 1193890000 vertical 3x105 3x88 3x66 2x53 2x44 1x33 horizontal 5x71 5x59 4x45 4x36 3x30 2x22

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 63 42 27 23 12 10 4 4 3 C/D 80 54 36 30 17 14 6 5 4

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

389.00 359.00

200

535.00 565.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.29

Klippon TB MH - Multi Hinge

Klippon TB MH 765015 Enclosures

Depth

150 mm

View without cover, seal and screw 449 417 117 81 472 502 534/564 508 117 81 677 709 508 762 345 315 64 127 150 M10 internal/external ground connection M6 internal ground connection 15

11

Height/Width/Depth

762 / 508 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195410000 1195420000 1195430000 1195440000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194030000 1193900000 vertical 4x132 4x111 3x83 3x67 2x56 2x42 horizontal 7x82 6x69 5x52 5x42 4x35 3x26

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 42 24 21 9 7 6 5 0 0 C/D 58 32 26 12 10 8 6 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

447.00 417.00 7

677.00 707.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.30

15

Klippon TB MH - Multi Hinge

Klippon TB MH 765020

Depth

200 mm Enclosures
677 709

View without cover, seal and screw 449 417 131 462 498 534/564 508 167 131 167

508 762

341 305

11

177

200

M10 internal/external ground connection M6 internal ground connection

15

126.5

Height/Width/Depth

762 / 508 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195460000 1195470000 1195480000 1195490000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194030000 1193900000 vertical 4x132 4x111 3x83 3x67 2x56 2x42 horizontal 7x82 6x69 5x52 5x42 4x35 3x26

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 70 48 32 26 14 12 5 4 3 C/D 96 64 40 34 18 14 6 6 4

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

447.00 417.00 7

677.00 707.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.31

Klippon TB MH - Multi Hinge

Klippon TB MH 916115 Enclosures

Depth

150 mm

View without cover, seal and screw 551 519

636/666 610

117 81

559 914

15

421 391

11

64 127 150

Height/Width/Depth

914 / 610 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195510000 1195520000 1195530000 1195540000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194040000 1193910000 vertical 5x161 4x135 4x102 3x82 3x68 2x51 horizontal 8x102 7x85 7x64 6x52 5x43 4x32

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 53 29 25 11 9 8 6 0 0 C/D 70 40 34 14 12 10 8 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

549.00 519.00 7

829.00 859.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.32

15

M10 internal/external ground connection

M6 internal ground connection

829 861

574 604

81 117

Klippon TB MH - Multi Hinge

Klippon TB MH 916120

Depth

200 mm Enclosures
829 861

View without cover, seal and screw 551 519

131 564 600 636/666 610

167

167 131

11

559 914

15

417 381

126.5 177

200

Height/Width/Depth

914 / 610 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195560000 1195570000 1195580000 1195590000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194040000 1193910000 vertical 5x161 4x135 4x102 3x82 3x68 2x51 horizontal 8x102 7x85 7x64 6x52 5x43 4x32

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 88 58 38 33 18 15 6 5 4 C/D 116 80 52 42 24 20 8 6 6

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

549.00 519.00 7

829.00 859.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

M10 internal/external ground connection

M6 internal ground connection

B.33

Klippon TB MH - Multi Hinge

Klippon TB MH 987420 Enclosures

Depth

200 mm

317 353 View without cover, seal and screw 167 131 681 650

796 740

625 980

450 414

11

131 167

126.5

M10 internal/external ground connection 177 200 M6 internal ground connection

15

Height/Width/Depth

980 / 740 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - positioned down (B) 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1195610000 1195620000 1195630000 1195640000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194050000 1193920000 vertical 6x174 6x146 5x110 4x88 4x74 3x55 horizontal 9x127 8x106 7x80 6x64 5x54 4x40

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Padlock with two keys Stainless steel, 1.4301 0905680000 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 96 64 42 36 20 16 6 6 4 C/D 126 84 54 48 26 22 10 8 6

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

680.00 650.00 7

896.00 926.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.34

15

896 927

B.35

Enclosures

Klippon TB QL - Quarter Lock

Enclosures

Klippon TB QL - Quarter Lock

Stainless steel enclosures for use in industrial and in explosive hazard areas

The Klippon TB enclosure series features excellent performance characteristics, even under the most difficult environmental conditions, and comply with the stricter requirements of explosive hazard areas found in the process or power generation industries. The new Klippon TB QL enclosure series offers further improvements to a product line that is already successfully leading the market. Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

"\

Overview of enclosures Ordering data

Description KTB QL 221513 S4E_* KTB QL 262615 S4E_* KTB QL 262620 S4E_* KTB QL 303015 S4E_* KTB QL 303020 S4E_* KTB QL 352615 S4E_* KTB QL 352620 S4E_* KTB QL 403015 S4E_* KTB QL 403020 S4E_* KTB QL 453815 S4E_* KTB QL 453820 S4E_* KTB QL 484815 S4E_* KTB QL 484820 S4E_* KTB QL 553515 S4E_* KTB QL 553520 S4E_* KTB QL 624515 S4E_* KTB QL 624520 S4E_* KTB QL 765015 S4E_* KTB QL 765020 S4E_* KTB QL 916115 S4E_* KTB QL 916120 S4E_* KTB QL 987420 S4E_* Note Length x width x depth in mm 229 x 152 x 133 260 x 260 x 150 260 x 260 x 200 306 x 306 x 150 306 x 306 x 200 350 x 260 x 150 350 x 260 x 200 400 x 300 x 150 400 x 300 x 200 458 x 382 x 150 458 x 382 x 200 480 x 480 x 150 480 x 480 x 200 550 x 350 x 150 550 x 350 x 200 620 x 450 x 150 620 x 450 x 200 762 x 508 x 150 762 x 508 x 200 914 x 610 x 150 914 x 610 x 200 980 x 740 x 200 1 Gland Plate 2 Gland Plates 3 Gland Plates 4 Gland Plates (below) (above + below) (below + sides) (all sides) 1199860000 1199870000 1199880000 1199890000 1199910000 1199920000 1199930000 1199940000 1199960000 1199970000 1199980000 1199990000 1200020000 1200030000 1200040000 1200050000 1200070000 1200080000 1200090000 1200100000 1200120000 1200130000 1200140000 1200150000 1200170000 1200180000 1200190000 1200210000 1200230000 1200240000 1200250000 1200260000 1200280000 1200290000 1200310000 1200320000 1200340000 1200350000 1200360000 1200370000 1200390000 1200410000 1200420000 1200430000 1200450000 1200460000 1200470000 1200480000 1200510000 1200520000 1200530000 1200540000 1200560000 1200570000 1200580000 1200590000 1200620000 1200630000 1200640000 1200650000 1200670000 1200680000 1200690000 1200710000 1200730000 1200740000 1200750000 1200760000 1200780000 1200790000 1200810000 1200820000 1200840000 1200850000 1200860000 1200870000 1200890000 1200910000 1200920000 1200930000 1200950000 1200960000 1200970000 1200980000 1201010000 1201020000 1201030000 1201040000 * Placeholder for the number of gland plates (1, 2, 3, 4). Klippon TB QL enclosures are available without gland plates on request.

B.36

Klippon TB QL - Quarter Lock

Technical Overview Features

Available in 12 sizes and 3 standard depths Equipped with up to 4 gland plates The gasket is protected against compression Quick-locking lid, comes with a slot as standard Improved temperature performance IP66 protection class Earth studs in enclosure cover and bottom section Welded mounting feet Note

Technical data
Enclosure material** Surface finish IP protection class NEMA protection classes Gland plates Gland plate thickness Earthing inside Earthing outside Installation mounting Enclosure attachment Lid opening Cover attachment Impact resistance Gasket material Operating temperature range Lid screws, torque* Note Stainless steel 1.4404 (316L) 1.5 mm electropolished IP66 3, 4x, 12 1 - 4 (fixed with M6 hexagon head screws with a slot and 10 mm heads), optionally without a gland plate. 3 mm (other thickness of up to 20 mm are available on request) Enclosure base and lid: welded M6 stainless steel earth studs Continuous M10 brass earth stud (optionally with stainless-steel earth stud) 4 or 6 mounting bolts with M6 threaded holes to attach the mounting plate or mounting rails 4 welded mounting feet with 11-mm holes (2 slotted and 2 cross-shaped openings) can be removed completely, lid opening angle 130 Quarter-turn lock with slotted insert (other inserts available on request) 7 J ATEX applications, 10 J industrial applications Silicone -60 C+135 C 2.5 Nm * To secure the lid, please use our hexagonal socket wrench with a 10 mm socket (9009070000) ** Painted steel enclosures are available on request.

Approvals for empty enclosures

ATEX certificate ATEX marking IECEx certificate IECEx marking GOST Ex GOST R cULus Germanischer Lloyd Russian Maritime Register Note KEMA 10ATEX0047 U II 2 G Ex e llC Gb II 2 D Ex tb lllC Db IP66 IECEx KEM 10.0016U Ex e IIC Gb Ex tb IIIC Db IP66 POCC DE.ME92.B02036 In preparation E243298 11534 - 10 HH 10.04095.250 The Klippon TB QL enclosure series can be pre-fitted in our customer specific production department according to your wishes; as an example, terminals, or other approved components, can be installed as required.

Approvals for control and distribution box

ATEX certificate ATEX marking KEMA 10ATEX0051 II 2 G Ex eb IIC T6...T4 II 1 G Ex ia IIC T6...T4 II 2(1) G Ex eb ia IIC T6...T4 II 2 D Ex tb lllC T85 C...T135 C IP66 IECEx KEM 10.0020 Ex eb IIC T... Ex ia IIC T... Ex eb ia IIC T... Ex tb IIIC T85 CT135 C IP66 Labelling depends on the application layout.

IECEx certificate IECEx marking

Note

B.37

Enclosures

Enclosures

B.38

Klippon TB QL - Quarter Lock

Klippon TB QL 221513

Depth

133 mm Enclosures

View without cover, seal and lock 93 75

116 146 178/208 152 100 64

64 100

158 176

152 229

177 147

55.5

55 M10 internal/external ground connection

15

110

133

M6 internal ground connection

Height/Width/Depth

229 / 152 / 133 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1199860000 1199870000 1199880000 1199890000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193930000 1193810000 vertical 1x29 horizontal 1x15 1x13 1x9 1x7 1x6

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 6 5 2 2 1 1 0 0 0 C/D 8 6 3 2 2 2 0 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

91.00 75.00

158.00 174.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.39

Klippon TB QL - Quarter Lock

Klippon TB QL 262615 Enclosures

Depth

150 mm

View without cover, seal and lock 201 183

224 254 286/316 260

B
1 1

81 117

117 81

170 260

208 178

55.5

64

127

150

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

260 / 260 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1199910000 1199920000 1199930000 1199940000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193950000 1193820000 vertical 2x35 1x30 1x22 1x18 1x15 horizontal 2x34 1x29 1x22 1x17 1x14

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 20 11 9 4 3 3 2 0 0 C/D 15 8 7 3 2 2 2 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

199.00 183.00

189.00 205.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.40

15

189 207

Klippon TB QL - Quarter Lock

Klippon TB QL 262620

Depth

200 mm Enclosures
189 207

View without cover, seal and lock 201 183

214 250 286/316 260

131 167

167 131

1 1

170 260

204 168

55.5

126.5

177

200

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

260 / 260 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1199960000 1199970000 1199980000 1199990000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193950000 1193820000 vertical 2x35 1x30 1x22 1x18 1x15 horizontal 2x34 1x29 1x22 1x17 1x14

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 33 22 14 12 6 5 2 2 1 C/D 25 16 11 9 4 4 2 1 1

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

199.00 183.00

189.00 205.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.41

Klippon TB QL - Quarter Lock

Klippon TB QL 303015 Enclosures

Depth

150 mm

View without cover, seal and lock 247 229

270 300 362 306 117 81

B
11

203 306

81 117

127

150

M10 internal/external ground connection

15

55.5

254 224

64

M6 internal ground connection

Height/Width/Depth

306 / 306 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200020000 1200030000 1200040000 1200050000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193960000 1193830000 vertical 2x44 2x37 2x28 1x22 1x19 1x14 horizontal 2x43 2x36 2x27 1x22 1x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 24 13 11 5 4 3 3 0 0 C/D 20 11 9 4 3 3 2 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

245.00 229.00

235.00 251.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.42

15

235 253

Klippon TB QL - Quarter Lock

Klippon TB QL 303020

Depth

200 mm Enclosures

View without cover, seal and lock 247 229

260 296 362 306 167 131

131 167

235 253

11
203 306 250 214

55,5

126.5

177

200

M10 internal/external ground connection

15

M6 internal ground connection

Height/Width/Depth

306 / 306 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200070000 1200080000 1200090000 1200100000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193960000 1193830000 vertical 2x44 2x37 2x28 1x22 1x19 1x14 horizontal 2x43 2x36 2x27 1x22 1x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 40 26 17 14 8 6 3 2 2 C/D 33 22 14 12 6 5 2 2 1

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

245.00 229.00

235.00 251.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.43

Klippon TB QL - Quarter Lock

Klippon TB QL 352615 Enclosures

Depth
View without cover, seal and lock 201 183

150 mm

244 254

B
11

286/316 260

81 117

117 81

150

250

350

298

268

55.5

64

127

150

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

350 / 260 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200120000 1200130000 1200140000 1200150000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193970000 1193840000 vertical 2x53 1x44 1x33 1x27 1x22 horizontal 2x34 2x29 2x22 2x17 1x14 1x11

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 20 11 9 4 3 3 2 0 0 C/D 23 13 11 5 4 3 3 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

199.00 183.00

279.00 295.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.44

15

279 297

Klippon TB QL - Quarter Lock

Klippon TB QL 352620

Depth
View without cover, seal and lock 201 183

200 mm Enclosures
279 297

214 250 286/316 260 167 131

131 167

11
150 250 350 294 258

55.5

126.5

177

200

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

350 / 260 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200170000 1200180000 1200190000 1200210000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193970000 1193840000 vertical 2x53 1x44 1x33 1x27 1x22 horizontal 2x34 2x29 2x22 2x17 1x14 1x11

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 33 22 14 12 6 5 2 2 1 C/D 38 26 17 14 7 6 3 2 2

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

199.00 183.00

279.00 295.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.45

Klippon TB QL - Quarter Lock

Klippon TB QL 403015 Enclosures

Depth

150 mm

View without cover, seal and lock 241 223

329 117 81 348 318 64 M10 internal/external ground connection M6 internal ground connection 15

264 294

B
11

326/356 300

55.5

127

150

200 247 400

117

Height/Width/Depth

400 / 300 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200230000 1200240000 1200250000 1200260000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193980000 1193850000 vertical 2x62 2x52 1x39 1x32 1x26 1x20 horizontal 3x42 3x35 2x26 2x21 2x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 23 13 11 5 4 3 3 0 0 C/D 29 16 13 6 5 4 3 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

239.00 223.00 7

329.00 345.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.46

15

347

81

Klippon TB QL - Quarter Lock

Klippon TB QL 403020

Depth

200 mm Enclosures
329 347

View without cover, seal and lock 241 223

131 254 290

167

326/356 300

167 131

11
344 200 247 400 308

55.5

126.5

177

200

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

400 / 300 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200280000 1200290000 1200310000 1200320000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193980000 1193850000 vertical 2x62 2x52 1x39 1x32 1x26 1x20 horizontal 3x42 3x35 2x26 2x21 2x18 1x13

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 38 26 17 14 7 6 3 2 2 C/D 48 32 20 17 9 7 3 3 2

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

239.00 223.00 7

329.00 345.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.47

Klippon TB QL - Quarter Lock

Klippon TB QL 453815 Enclosures

Depth

150 mm

View without cover, seal and lock 323 305

387 117 81 458 406 376 64 M10 internal/external ground connection M6 internal ground connection 15

346 376

B
11

408/438 382

158

55.5

305

117

81

127

Height/Width/Depth

458 / 382 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200340000 1200350000 1200360000 1200370000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193990000 1193860000 vertical 3x73 2x62 2x46 2x37 2x31 1x23 horizontal 4x58 3x48 3x36 2x29 2x24 1x18

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 30 17 15 6 5 4 4 0 0 C/D 33 19 16 7 6 5 4 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

321.00 305.00 7

150

387.00 403.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.48

15

405

Klippon TB QL - Quarter Lock

Klippon TB QL 453820

Depth

200 mm Enclosures
387 405

View without cover, seal and lock 323 305

131 336 372 408/438 382

167

167 131

11
158 305 458 402 366

55.5

126.5

M10 internal/external ground connection M6 internal ground connection

15

177

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200390000 1200410000 1200420000 1200430000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1193990000 1193860000 vertical 3x73 2x62 2x46 2x37 2x31 1x23 horizontal 4x58 3x48 3x36 2x29 2x24 1x18

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 50 34 23 18 10 8 4 3 2 C/D 55 38 24 21 11 9 4 3 3

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

321.00 305.00 7

200

387.00 403.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.49

Klippon TB QL - Quarter Lock

Klippon TB QL 484815 Enclosures

Depth

150 mm

View without cover, seal and lock 421 403

444 474

B
11

506/536 480

117

81

117 81

180 327 480

55.5

428 398

64

127

150

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

480 / 480 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200450000 1200460000 1200470000 1200480000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194000000 1193870000 vertical 4x78 3x65 3x49 2x39 2x33 1x25 horizontal 4x77 3x64 3x48 3x39 2x32 2x24

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 39 22 19 8 7 6 5 0 0 C/D 36 20 17 7 6 5 4 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

419.00 403.00 7

409.00 425.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.50

15

409 427

Klippon TB QL - Quarter Lock

Klippon TB QL 484820

Depth

200 mm Enclosures
409 427

View without cover, seal and lock 421 403

434 470 506/536 480 167 131

131 167

180 327 480

424 388

55.5

126.5

177

200

M10 internal/external ground connection M6 internal ground connection

15

Height/Width/Depth

480 / 480 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200510000 1200520000 1200530000 1200540000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194000000 1193870000 vertical 4x78 3x65 3x49 2x39 2x33 1x25 horizontal 4x77 3x64 3x48 3x39 2x32 2x24

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 65 44 29 24 13 11 5 4 3 C/D 60 40 26 21 12 10 4 4 3

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

419.00 403.00 7

409.00 425.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.51

Klippon TB QL - Quarter Lock

Klippon TB QL 553515 Enclosures

Depth

150 mm

View without cover, seal and lock 291 273

314 344 376/406 350 117 81

117

81

11

250 350 550

498

468

55.5

64

127

150

M10 internal/external ground connection 15

Height/Width/Depth

550 / 350 / 150 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200560000 1200570000 1200580000 1200590000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194010000 1193880000 vertical 2x91 2x76 2x58 2x46 1x39 1x29 horizontal 4x52 4x43 4x32 3x26 3x22 2x16

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 27 15 13 6 5 4 3 0 0 C/D 42 24 20 9 7 6 5 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

289.00 273.00 7

479.00 495.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.52

15

479 497

Klippon TB QL - Quarter Lock

Klippon TB QL 553520

Depth

200 mm Enclosures
479 497

View without cover, seal and lock 291 273

131 304 340 376/406 350

167

167 131

B
250 350 550 494 458

55.5

126.5

177

M10 internal/external ground connection 15

200

Height/Width/Depth

550 / 350 / 200 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200620000 1200630000 1200640000 1200650000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194010000 1193880000 vertical 2x91 2x76 2x58 2x46 1x39 1x29 horizontal 4x52 4x43 4x32 3x26 3x22 2x16

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 45 30 20 17 9 7 3 3 2 C/D 70 48 30 26 14 12 5 4 3

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

289.00 273.00 7

479.00 495.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

B.53

Klippon TB QL - Quarter Lock

Klippon TB QL 624515 Enclosures

Depth

150 mm

View without cover, seal and lock 391 359 81 117 414 444 476/506 450 535 567 117 81
11

320 450 620

568 538 64

127

150

Height/Width/Depth

620 / 450 / 150 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200670000 1200680000 1200690000 1200710000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194020000 1193890000 vertical 3x105 3x88 3x66 2x53 2x44 1x33 horizontal 5x71 5x59 4x45 4x36 3x30 2x22

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 38 21 18 8 6 5 4 0 0 C/D 48 27 24 10 9 7 6 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

389.00 359.00

535.00 565.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.54

15

M10 internal/external ground connection

15

55.5

Klippon TB QL - Quarter Lock

Klippon TB QL 624520

Depth

200 mm Enclosures
535 567

View without cover, seal and lock 391 359 131 167 404 440 476/506 450

167 131

11

B
320 450 620 55.5 564 528

126.5

177

200

Height/Width/Depth

620 / 450 / 200 mm

M6 internal ground connection

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200730000 1200740000 1200750000 1200760000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194020000 1193890000 vertical 3x105 3x88 3x66 2x53 2x44 1x33 horizontal 5x71 5x59 4x45 4x36 3x30 2x22

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 63 42 27 23 12 10 4 4 3 C/D 80 54 36 30 17 14 6 5 4

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

389.00 359.00

535.00 565.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

M10 internal/external ground connection

15

B.55

Klippon TB QL - Quarter Lock

Klippon TB QL 765015 Enclosures

Depth

150 mm

View without cover, seal and lock 449 417 81 117 472 502 677 709 534/564 508 117 81 462 508 762 127 150 M6 internal ground connection
11

Height/Width/Depth

762 / 508 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200780000 1200790000 1200810000 1200820000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194030000 1193900000 vertical 4x132 4x111 3x83 3x67 2x56 2x42 horizontal 7x82 6x69 5x52 5x42 4x35 3x26

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 42 24 21 9 7 6 5 0 0 C/D 58 32 26 12 10 8 6 0 0

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

447.00 417.00 7

677.00 707.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.56

15

M10 internal/external ground connection

15

55.5

345 315 64

Klippon TB QL - Quarter Lock

Klippon TB QL 765020

Depth

200 mm Enclosures
677 709

View without cover, seal and lock 449 417

131 462 498 167

534/564 508

167 131

341

462 508 762

305

11

55.5

126.5

177

200

M6 internal ground connection

Height/Width/Depth

762 / 508 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200840000 1200850000 1200860000 1200870000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194030000 1193900000 vertical 4x132 4x111 3x83 3x67 2x56 2x42 horizontal 7x82 6x69 5x52 5x42 4x35 3x26

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 70 48 32 26 14 12 5 4 3 C/D 96 64 40 34 18 14 6 6 4

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

447.00 417.00 7

677.00 707.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

M10 internal/external ground connection

15

B.57

Klippon TB QL - Quarter Lock

Klippon TB QL 916115 Enclosures

Depth

150 mm

View without cover, seal and lock 551 519

574 604 636/666 610 117 81 829 861 15 15

559 614 914

55.5

127

150

M10 internal/external ground connection M6 internal ground connection

Height/Width/Depth

914 / 610 / 150 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200890000 1200910000 1200920000 1200930000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194040000 1193910000 vertical 5x161 4x135 4x102 3x82 3x68 2x51 horizontal 8x102 7x85 7x64 6x52 5x43 4x32

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 53 29 25 11 9 8 6 0 0 C/D 70 40 34 14 12 10 8 0 0

Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

549.00 519.00 7 829.00 859.00 Note
System accessories can be found after the Klippon TB QL product pages.

B.58

421 391 64

11

117

81

Klippon TB QL - Quarter Lock

Klippon TB QL 916120

Depth

200 mm Enclosures
829 861

View without cover, seal and lock 551 519 131 564 600 636/666 610 167

167 131

417

126.5

177

200

M10 internal/external ground connection M6 internal ground connection 15

Height/Width/Depth

914 / 610 / 200 mm

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1200950000 1200960000 1200970000 1200980000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194040000 1193910000 vertical 5x161 4x135 4x102 3x82 3x68 2x51 horizontal 8x102 7x85 7x64 6x52 5x43 4x32

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 88 58 38 33 18 15 6 5 4 C/D 116 80 52 42 24 20 8 6 6

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

549.00 519.00 7

829.00 859.00

Note

System accessories can be found after the Klippon TB QL product pages.

15

55.5

559 614 914

381

11

B.59

Klippon TB QL - Quarter Lock

Klippon TB QL 987420 Enclosures

Depth

200 mm

View without cover, seal and lock 681 650

317 353

B
11

766/796 740

131 167

167 131

625 680 980

450 414

55.5

Height/Width/Depth

980 / 740 / 200 mm

M10 internal/external ground connection M6 internal ground connection

15

126.5

177

Ordering data
Stainless steel 1.4404 316L, electropolished 1 gland plate - bottom 2 gland plates - positioned up and down (A & B) 3 gland plates - positioned down, left and right (B, C & D) 4 gland plates - positioned up, down, left and right (A, B, C & D) Note Order No. 1201010000 1201020000 1201030000 1201040000

Max. number of terminals (industry)

Max. number of terminals (industry) 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Note Order No. Steel sheet, galvanised Stainless steel, 1.4301 1194050000 1193920000 vertical 6x174 6x146 5x110 4x88 4x74 3x55 horizontal 9x127 8x106 7x80 6x64 5x54 4x40

Painted sheet steel enclosure available on request. Standard colour is similar to RAL 7035.

Accessories
Mounting plate

Stainless steel-Spacer M6 x 8, set of 4 10 mm length 15 mm length 20 mm length 30 mm length Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length 3896100000 3896200000 3896300000 0935110000 0935120000 0935130000 0935140000

*For enclosure versions with zero, one or two gland plates, the horizontal gap between the mounting feet is reduced by 30 mm. Assembly with terminal blocks provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 / (tension clamp terminal) PDU 2.5 1896110000 TS32 mounting rail (screw terminal) SAK 2.5 0279660000 TS15 mounting rail (screw terminal) AKZ 2.5 0697160000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note A/B 96 64 42 36 20 16 6 6 4 C/D 126 84 54 48 26 22 10 8 6

Our IP68 brass cable glands serve as a reference for these recommended values.

Dimensions of mounting plate

680.00 650.00 7

200

896.00 926.00

Note

System accessories can be found after the Klippon TB QL product pages.

B.60

15

896 927

Klippon TB - System accessories

The fully structured range of system accessories for the Klippon TB enclosure series allows you to easily adapt the enclosure to meet the specific requirements of every application. The following options are available: Type label holder to attach nameplates Mounting kit to mount and secure components Door stay to securely hold the opened enclosure lid Document holder available in A4, A5 and A6 sizes to keep documents in Mounting plates for custom enclosure component assembly Removable gland plates (3 mm or 6 mm versions) for the later addition of components like cable glands or heavy-duty connectors. Earth studs brass or stainless steel 1/4-quarter lock locking Inserts with two-way security lock or a slot, made from 1.4404 or 1.4301 stainless steel to securely lock the enclosure (Klippon TB QL) Stainless steel padlock (Klippon TB MH)

Other accessories such as rain hoods, spacers, and more are available on request. Using the appropriate quality tools from Weidmller guarantees a professional process they can be found in chapter G. All in all: ease of operation, maximum functionality and safety for the application and the user.

B.61

Enclosures

Integrate, expand and customise: the perfect supplement to every application

Klippon STB - Sheet steel enclosures

Enclosures

Small stainless steel and steel sheet enclosure series

Ideally suited for the energy and process industry and transportation, the Klippon STB series is the perfect complement to our existing Klippon enclosure product line. Enclosures of this series comply with international standards such as EN 62208 and EN 60079-0/7 (ATEX). Some of the many advantages of these cases are: Available in stainless steel or in steel sheet Higher temperature resistant seals than the standard (extended temperature range of -60 C to +100 C / 120 C, on request) Flexible options when mounting the internal rail The gasket is protected against compression; this ensures that a permanent and secure seal is maintained. Earth studs in the lid and in the enclosure base Lasered welding seams offer improved quality Delivered with welded mounting feet to ensure an sturdy enclosure installation Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

T~\u"

Overview of enclosures Ordering data

Description Klippon STB 1 Klippon STB 1.1 Klippon STB 2 Klippon STB 2.1 Klippon STB 3 Klippon STB 4 Klippon STB 5 Klippon STB 6 Dimensions 120 x 120 x 80 150 x 120 x 80 150 x 150 x 90 190 x 150 x 90 190 x 190 x100 250 x 250 x 120 160 x 380 x 120 250 x 400 x 130 Mirror-polish 1002690000 1002750000 1002740000 1002730000 1002720000 1002710000 1002700000 1002760000 Electropolished 1058810000 1058820000 1058830000 1058840000 1058850000 1058860000 1058880000 1058870000 Powder-coated (RAL7032) 1024970000 1024980000 1024990000 1025010000 1025020000 1025030000 1025040000 1025050000

B.62

Klippon STB - Sheet steel enclosures

Technical Overview Features

Mirror-polished or electropolished stainless steel 1.4404 (316L) or powder coated steel sheet 1.0330 Fitted with a welded, internal C-profile rail (TAS 20) and mounting feet Laser cut weld seams Approved according to the latest international norms (e.g. ATEX, cULus, GOST) Note: We deliver enclosures through our assembly service which are ready to be connected and suitable for every application

Technical data
Enclosure material Surface finish IP protection class Earthing Stainless steel Stainless steel 1.4404 (316L) 1.50 mm mirror-polished, electropolished IP 66 Enclosure base part: internal / external M6 stainless steel Lid: M6 x 12 stainless steel Welded C-profile rail 2 external mounting feet with 8 mm holes completely removable lid with 4 x M5 screws 7J ATEX Silicone -60 C+100 C (120 C on request) 2.5 Nm Sheet steel Steel sheet 1.0330 1.50 mm powder-coated RAL 7032 IP 66 Enclosure base part: internal / external M6 stainless steel Lid: M6 x 12 stainless steel Welded C-profile rail 2 external mounting feet with 8 mm holes completely removable lid with 4 x M5 screws 10J industrial version Silicone -60 C+120 C 2.5 Nm

Installation mounting Enclosure attachment Lid opening Impact resistance Gasket material Lid screws, torque*

The gasket is protected against compression in line with the manufacturers recommendation Note: To secure the lid, please use our hexagonal socket wrench with a 10 mm socket (9009070000) see chapter G

Approvals for empty enclosures

ATEX / IECEx certificate ATEX / IECEx marking cULus Lloyds Register Germanischer Lloyd GOST Installation Stainless steel IBExU 07ATEX1147 U / IECEx IBE09.0018U T II 2 G Ex e II C Gb T II 2 D Ex tb IIIC Db IP66 E 197061 08/20032 5935808 HH POCC DE.ME25.B01450 Sheet steel **

** ** **

The Klippon STB enclosure series can be pre-fitted in our customer specific production department according to your wishes;

as an example, terminals, or other approved components, can be installed as required. Note: This enclosure series is component certified. If other electrical components are inserted into the case, additional certification is required. ** Approvals are pending.

Approvals for control and distribution box

ATEX / IECEx certificate ATEX / IECEx marking Stainless steel IBExU 07ATEX1148 / IECEx IBE09.0019 T II 2 G Ex e IIC Gb Tx, T II 2 D Ex tb IIIC Db IP6x Txxxx C T I II 1 G Ex ia IIC Ga Tx, T II 1 D Ex tb IIIC Db IP6x Txxx C Sheet steel **

T II 2 G Ex e IIC Gb Tx, T II 2 D Ex tb IIIC Db IP6x Txxx C Note: If you have specific requirements for equipment operating in explosive hazard areas, please contact us at Weidmller to receive a full copy of the certification. * The Klippon STB steel version is not Ex certified ** Approvals are pending.

B.63

Enclosures

Klippon STB - Sheet steel enclosures

Klippon STB 1 Enclosures

Depth

80 mm

M6 INTERNAL / EXTERNAL GROUND CONNECTION

80

145 126

126

B
25

40

139

87

120 70

120

Height/Width/Depth

120 / 120 / 80 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1024970000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002690000 1058810000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x17 1x14 1x11 1x8 1x7 horizontal

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 10 6 6 3 2 2 C/D 8 4 4 2 1 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

B.64

100

Klippon STB - Sheet steel enclosures

Klippon STB 1.1

Depth

80 mm Enclosures

M6 INTERNAL / EXTERNAL GROUND CONNECTION 80

145 126

40

B
139 87

25

156

120 100

150

Height/Width/Depth

150 / 120 / 80 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1024980000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002750000 1058820000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x23 1x19 1x14 1x11 1x9 horizontal

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 10 6 3 3 2 2 C/D 10 6 3 2 2 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

100

B.65

Klippon STB - Sheet steel enclosures

Klippon STB 2 Enclosures

Depth
M6 INTERNAL / EXTERNAL GROUND CONNECTION 90

90 mm

175 156

B
25

156

40

169

97 150 130

150

Height/Width/Depth

150 / 150 / 90 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1024990000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002740000 1058830000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x23 1x19 1x14 1x11 1x9 horizontal

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 15 10 8 3 3 2 1 C/D 15 8 6 2 2 2 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

B.66

140

Klippon STB - Sheet steel enclosures

Klippon STB 2.1

Depth
M6 INTERNAL / EXTERNAL GROUND CONNECTION 90

90 mm Enclosures

175 156

40

B
169 97 150 130

25

156

150

Height/Width/Depth

190 / 150 / 90 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1025010000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002730000 1058840000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x30 1x25 1x20 1x15 1x13 horizontal

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 15 10 8 3 3 2 1 C/D 18 10 10 3 3 2 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

140

B.67

Klippon STB - Sheet steel enclosures

Klippon STB 3 Enclosures

Depth

100 mm

M6 INTERNAL / EXTERNAL GROUND CONNECTION

100

215 196

196

B
25

45

209

107

190 140

190

Height/Width/Depth

190 / 190 / 100 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1025020000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002720000 1058850000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x30 1x25 1x20 1x15 1x13 horizontal

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 21 15 10 8 3 3 2 1 C/D 21 15 8 6 3 2 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

B.68

170

Klippon STB - Sheet steel enclosures

Klippon STB 4

Depth

120 mm Enclosures

M6 INTERNAL / EXTERNAL GROUND CONNECTION 120

275 256

256

55

B
269 127

25

251 200

250

Height/Width/Depth

250 / 250 / 120 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1025030000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002710000 1058860000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 2x42 2x35 2x27 2x22 2x18 horizontal 2x42 2x35 2x27 2x22 2x18

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 32 21 12 10 8 3 2 2 C/D 32 21 12 10 8 3 2 2

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

230

B.69

Klippon STB - Sheet steel enclosures

Klippon STB 5 Enclosures

Depth

120 mm

M6 INTERNAL / EXTERNAL GROUND CONNECTION 120

405 386

25

166 80

58

399

127

380 330

160

Height/Width/Depth

160 / 380 / 120 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1025040000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002700000 1058880000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 3x25 3x21 3x16 3x12 3x10 horizontal 1x68 1x57 1x44 1x35 1x29

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 64 15 30 16 10 6 4 2 C/D 20 12 12 6 4 2 1 1

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

B.70

140

Klippon STB - Sheet steel enclosures

Klippon STB 6

Depth

130 mm Enclosures

M6 INTERNAL / EXTERNAL GROUND CONNECTION 130

425 406

256 150

63

B
25 419 137

400 350

250

Height/Width/Depth

250 / 400 / 130 mm

Ordering data
Stainless-steel-sheet (1.4404 316L) Polished Sheet Electropolished Sheet steel, Powder-coated (RAL 7032) Powder-coated paint Note 1025050000
The colours of painted enclosures may vary under certain circumstances.

Max. number of terminals (industry)

Order No. 1002760000 1058870000 Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 3x42 3x35 3x27 3x22 3x18 horizontal 2x72 2x60 2x46 2x37 2x30

Accessories
Sliding fixing nut with screw M5 Order No. 0433500000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Recommended order: TS 35 mounting rail (screw terminal) WDU 2.5 1020000000 / (tension clamp terminal) ZDU 2.5 1608510000 TS 32 mounting rail (screw terminal) SAK 2.5 0279660000 TS 15 mounting rail (screw terminal) AKZ 2.5 0697160000

Socket wrench M10 socket wrench 9009070000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 64 33 30 16 10 6 4 2 C/D 36 21 18 10 8 3 2 2

Note

The enclosure is supplied with a set of sliding fixing nuts, washer, screws M5, to fix the mounting rail TS35 or TS32 into the C-Profile.

230

B.71

Klippon K - Aluminium enclosures

Enclosures

Aluminium enclosures

Klippon K series enclosures can be used in a variety of applications, e.g. for mounting terminals, switches, power supplies, operational and display elements or electronic modules. The extensive Klippon K enclosure range has the following advantages: More flexibility 19 different sizes Available in two surface finishes powder-coated and natural Mounting holes not within the sealed area Fastening thread to attach mounting rails and plates Closed moulded gasket (no glue seam) Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

Tu"

Overview of enclosures Ordering data

Description Dimensions Powder-coated (RAL 7001) Standard CR moulded seal 9529090000 9529100000 9529110000 9529120000 9529130000 9529140000 9529150000 9529160000 9529170000 9529180000 9529190000 9529200000 9529210000 9529220000 9529230000 9529240000 9529250000 9529260000 9529270000 Silicone moulded seal* 1937920000 1937850000 1937840000 1937630000 1937910000 1937930000 1937830000 1937900000 1937820000 1937810000 1937890000 1937800000 1937860000 1937750000 1937740000 1937870000 1937730000 1937880000 1937720000 Unpainted Standard CR moulded seal 0573200000 1565240000 1565250000 0342000000 0573300000 0342100000 0573400000 0342200000 0573500000 1565260000 0342300000 1565270000 0342400000 1565280000 1565290000 0342500000 0573600000 0342600000 0573700000 Silicone moulded seal* 1939760000 1939540000 1939550000 1939560000 1939570000 1939580000 1939590000 1939600000 1939610000 1939620000 1939630000 1939640000 1939650000 1939660000 1939670000 1939690000 1939700000 1939710000 1939730000 Ex enclosure Silicone moulded seal 9526810000 9526820000 9526830000 9526840000 9526850000 9526860000 9526870000 9526880000 9526890000 9526900000 9526910000 9526920000 9526930000 9526940000 9526950000 9526960000 9526970000 9526980000 9526990000

Klippon K 0 Klippon K 01 Klippon K 02 Klippon K 1 Klippon K 11 Klippon K 2 Klippon K 21 Klippon K 3 Klippon K 31 Klippon K 32 Klippon K 4 Klippon K 41 Klippon K 5 Klippon K 51 Klippon K 52 Klippon K 6 Klippon K 61 Klippon K 7 Klippon K 71
Note: * Delivery time on request

45 x 50 x 30 64 x 58 x 34 64 x 98 x 34 70 x 70 x 45 802 x 75 x 57 70 x 100 x 45 80 x 125 x 57 70 x 165 x 45 80 x 175 x 57 80 x 250 x 55 82 x 130 x 72 120 x 122 x 81 130 x 170 x 90 120 x 220 x 81 160 x 160 x 91 160 x 200 x 100 160 x 260 x 91 160 x 350 x 100 230 x 280 x 111

B.72

Klippon K - Aluminium enclosures

Technical Overview Features

Two surfaces: natural and powder-coated High IP protection up to IP 68 Moulded silicone gasket for applications with high temperatures A uniform Torx-slotted screw head is used for over 19 different enclosure sizes. Alloy is resistant to salt water Approved according to the latest international standards (e.g. ATEX, cULus, GOST) Note: We deliver enclosures through our assembly service which are ready to be connected and suitable for every application

Technical data
Enclosure material Surface, untreated Surface, painted Painting IP protection class Earthing outside Installation mounting Enclosure mounting Lid fixing Impact resistance Gasket material Temperature range Ex High quality aluminium alloy (Al-Si12) Smooth Standard High quality aluminium alloy (Al-Si12) Smooth silver grey, textured, similar to RAL 7001 40 m paint thickness IP 66, IP 67 and IP 68* flexible DIN rail mounting Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon K 41) Captive stainless steel Torx 20 or slotted screws. 10J Chloroprene / Silicone (VMQ) -40 C+80 C with chloroprene gasket / -50 C+135 C with silicone gasket 2.5 Nm

IP 66, IP 67 Earthing studs, M4 flexible DIN rail mounting Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon K 41) Captive stainless steel Torx 20 or slotted screws. 7J Silicone (VMQ) -50 C+135 C

Lid screws, torque** 2.5 Nm Note: * (t = 72 h; h = 1 m) ** To secure the lid we recommend the use of our Torx TH20 screwdriver (9009160000), see chapter G Depending on the screw head size, our slotted screwdriver may also be used as an alternative

Approvals for empty enclosures

ATEX certificate ATEX marking IECEx certificate IECEx marking GOST Ex GOST cULus Russian Maritime Register Germanischer Lloyd Installation Ex KEMA 02ATEX2088 U II 2 G Ex e II IP66/IP67 Approvals are pending Approvals are pending POCC DE.ME92.B00362 POCC DE.ME25.B01450 11040200 4453607 HH Standard

POCC DE.ME25.B01450 E 197061 11040200 4453607 HH

The Klippon K enclosure series can be pre-fitted in our customer specific production department according to your wishes;

as an example, terminals, or other approved components, can be installed as required. Note: This enclosure series is component certified. If other electrical components are inserted into the case, additional certification is required.

Approvals for control and distribution box

ATEX certificate ATEX marking Ex KEMA 00ATEX8501 X Standard II 2 GD Ex e II T6/T3 IP66/IP67 II 1 GD Ex ia IIC T6/T3 II 2 (1) GD Ex e[ia] IIG T6/T3 Note: If you have specific requirements for equipment operating in explosive hazard areas, please contact us at Weidmller to receive a full copy of the certification.

B.73

Enclosures

Klippon K - Aluminium enclosures

Klippon K 0 Enclosures

Depth

30 mm

25

50 30

45

35

B
40

25

7.2

9* 7.5*

40

64*

Height/Width/Depth

45 / 50 / 30 mm

XX* only for 9526810000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573200000 9526810000 Order No. 9529090000 1937920000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x1* 1x1*

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Torx screwdriver Uninsulated Torx TH20 Order No. 9009160000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend installing at most one BK 3 or BK 3 CRN (0624920000). There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 1 1 C/D 1 1

**Our IP68 brass cable glands are used as the reference for these guideline values.

Note

B.74

35

Klippon K - Aluminium enclosures

Klippon K 01

Depth

34 mm Enclosures

17.5

10* 58

7.5*

28

B
34 46

64

46

52

36

Height/Width/Depth

64 / 58 / 34 mm

XX* only for 9526820000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565240000 9526820000 Order No. 9529100000 1937850000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x1* 1x1*

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Torx screwdriver Uninsulated Torx TH20 Order No. 9009160000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend installing at most one BK 3 or BK 3 CRN (0624920000). There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 1 1 C/D 1 1

**Our IP68 brass cable glands are used as the reference for these guideline values.

Note

77*

B.75

Klippon K - Aluminium enclosures

Klippon K 02 Enclosures

Depth

34 mm

28.2

17.5*

10* 98

64

B
86

52

7.5*

86

36

Height/Width/Depth

64 / 98 / 34 mm

XX* only for 9526830000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565250000 9526830000 Order No. 9529110000 1937840000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x1* 1x1*

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Torx screwdriver Uninsulated Torx TH20 Order No. 9009160000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. For vertical installations we recommend a maximum of one BK 4 or BK 4 CRN (0625120000) and for horizontal at most one BK 6 or BK6 CRN (0625220000). There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 1 1 C/D 3 3

**Our IP68 brass cable glands are used as the reference for these guideline values.

Note

B.76

77*

Klippon K - Aluminium enclosures

Klippon K 1

Depth

45 mm Enclosures

38.5 32

70

70

58

B
58 45 7.5*

58

Height/Width/Depth

70 / 70 / 45 mm

XX* only for 9526840000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342000000 9526840000 Order No. 9529120000 1937630000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x5 1x1*

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 15 mm width Order No. 1909980000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. For vertical installations, we recommend using not more than one BK 4 or BK 4 CRN (0625120000). For horizontal installations with 2.5mm 1x5 AKZ terminal blocks (only possible on a TS15) for 4mm, use not more than one BK 4. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 1905280000

Number of cable entries

Torx screwdriver Uninsulated Torx TH20 9009160000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 2 2 1 C/D 1 1

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

61 52 1.5

4.5

52

Note

Accessories described above as sets, are supplied with fixing materials.

42

11*

83.4*

B.77

Klippon K - Aluminium enclosures

Klippon K 11 Enclosures

Depth

57 mm

44.3

51

11* 75

80

68

7.5*

63

57

63

52

Height/Width/Depth

80 / 75 / 57 mm

XX* only for 9526850000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573300000 9526850000 Order No. 9529130000 1937910000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x5 1x4

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 15 mm width Order No. 1909990000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 3073000000

Number of cable entries

Hinge, diecast zinc, Set 1580360000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 2 2 1 1 C/D 2 2 1

Torx screwdriver Uninsulated Torx TH20 9009160000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

64 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

56

B.78

67

93*

Klippon K - Aluminium enclosures

Klippon K 2

Depth

45 mm Enclosures

38.5

31.8

100

70

58

B
45

88

11*

7.5*

83.4*

88 XX* only for 9526860000

Height/Width/Depth

70 / 100 / 45 mm

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342100000 9526860000 Order No. 9529140000 1937930000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x10

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 15 mm width Order No. 1910010000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 1905270000

Number of cable entries

Torx screwdriver Uninsulated Torx TH20 9009160000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 3 3 2 C/D 1 1

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

91 1.5

4.5

52

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

82

42

B.79

Klippon K - Aluminium enclosures

Klippon K 21 Enclosures

Depth

57 mm

44.3

51

11* 125

80

B
113

68

7.5*

57

113

52

Height/Width/Depth

80 / 125 / 57 mm

XX* only for 9526870000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573400000 9526870000 Order No. 9529150000 1937830000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x15 1x12

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 15 mm width Order No. 1910020000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 3073020000

Number of cable entries

Hinge, diecast zinc, Set 1580360000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 6 4 3 2 C/D 2 2 1

Torx screwdriver Uninsulated Torx TH20 9009160000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

114 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

106

B.80

67

93*

Klippon K - Aluminium enclosures

Klippon K 3

Depth

45 mm Enclosures

38.5

31.8

165

45

70

58

12*

7.5* 153

153

178.4*

Height/Width/Depth

70 / 165 / 45 mm

XX* only for 9526880000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342200000 9526880000 Order No. 9529160000 1937900000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x22

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 15 mm width Order No. 1910030000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised More tightly drawn Torx screwdriver Uninsulated Torx TH20 9009160000 1898210000 1899630000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 6 5 4 C/D

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

156

4.5

147.2

Note

Accessories described above as sets, are supplied with fixing materials.

44

42

B.81

Klippon K - Aluminium enclosures

Klippon K 31 Enclosures

Depth

57 mm

51 44.3

11* 175

80

7.5* 68

B
163

57

163

52

Height/Width/Depth

80 / 175 / 57 mm

XX* only for 9526890000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573500000 9526890000 Order No. 9529170000 1937820000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x23 1x19

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910040000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 3073040000

Number of cable entries

Hinge, diecast zinc, Set 1580360000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 9 6 4 3 C/D 2 2 1

Torx screwdriver Uninsulated Torx TH20 9009160000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

164 2

156

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.82

67

93*

Klippon K - Aluminium enclosures

Klippon K 32

Depth

55 mm Enclosures

48.5

42.3

7.5*

250

19*

80

68

238

55

263* 238

52

Height/Width/Depth

80 / 250 / 55 mm

XX* only for 9526900000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565260000 9526900000 Order No. 9529180000 1937810000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x38 1x32

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910050000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 3073050000

Number of cable entries

Torx screwdriver Uninsulated Torx TH20 9009160000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 15 9 7 6 C/D 2 2 1

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

231 2

239

Note

Accessories described above as sets, are supplied with fixing materials.

67

B.83

Klippon K - Aluminium enclosures

Klippon K 4 Enclosures

Depth

72 mm

55.5

66

130 12*

82

B
98

68

72

116

143*

Height/Width/Depth

82 / 130 / 72 mm

XX* only for 9526910000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342300000 9526910000 Order No. 9529190000 1937890000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x5 1x4 1x3 1x2 horizontal * *

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910060000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 6 or BK 6 CRN (0625220000) for horizontal installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a horizontal position.

Mounting plate Steel sheet, galvanised 3073060000

Number of cable entries

Hinge, diecast zinc, Set 1580360000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 2 2 1 1 1 C/D 5 3 2 2

Torx screwdriver Uninsulated Torx TH20 9009160000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Dimensions of mounting plate

116 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

54

B.84

68

68

Klippon K - Aluminium enclosures

Klippon K 41

Depth

81 mm Enclosures

72

63

7.5*

122

14*

B
81

120

106

104

135* 122

120

Height/Width/Depth

120 / 122 / 81 mm

XX* only for 9526920000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565270000 9526920000 Order No. 9529200000 1937800000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x13 1x11 1x8 1x6

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910070000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no specified mounting options available for mounting the enclosure in a vertical position. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9511200000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073070000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 6 6 3 2 1 C/D 4 4 2 1 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9527590000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

109 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

95

104

B.85

Klippon K - Aluminium enclosures

Klippon K 5 Enclosures

Depth

90 mm

83.5 73

170

130

84 150 17* 7.5* 150

183*

Height/Width/Depth

130 / 170 / 90 mm

XX* only for 9526930000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342400000 9526930000 Order No. 9529210000 1937860000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x20 1x16 1x12 1x10 1x8

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910080000

Note

Earth bar, Set 9511220000

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no specified mounting options available for mounting the enclosure in a vertical position. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Number of cable entries

Mounting plate Steel sheet, galvanised 3073080000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 11 8 4 3 2 C/D 4 2 1 1 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9529080000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

150 2

138

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.86

110

110

Klippon K - Aluminium enclosures

Klippon K 51

Depth

81 mm Enclosures

72

63

7.5* 14*

220

120

104

204

81

233* 204

82

Height/Width/Depth

120 / 220 / 81 mm

XX* only for 9526940000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565280000 9526940000 Order No. 9529220000 1937750000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x31 1x26 1x19 1x15

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910090000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 6 or BK 6 CRN (0625220000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9511210000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073090000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 23 14 8 5 3 3 C/D 6 3 2 1 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9527590000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

207 2

193

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

106

B.87

Klippon K - Aluminium enclosures

Klippon K 52 Enclosures

Depth

91 mm

82

73

7.5*

160

19*

160

140

91 140

173* 140

110

Height/Width/Depth

160 / 160 / 91 mm

XX* only for 9526950000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 1565290000 9526950000 Order No. 9529230000 1937740000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x18 1x15 1x11 1x9

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910100000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9511220000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073100000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 14 8 5 3 2 1 C/D 8 5 3 2 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9527590000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

145 130 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.88

146

Klippon K - Aluminium enclosures

Klippon K 6

Depth

100 mm Enclosures

93.5

83

200

100

160

114

180

17* 7.5*

180

213*

Height/Width/Depth

160 / 200 / 100 mm

XX* only for 9526960000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342500000 9526960000 Order No. 9529240000 1937870000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x25 1x21 1x15 1x12 1x10

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910110000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9525020000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073110000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 17 12 7 4 3 2 C/D 6 6 3 2 2 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9529080000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

183 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

162.5

145

140

B.89

Klippon K - Aluminium enclosures

Klippon K 61 Enclosures

Depth

91 mm

82

73

7.5*

260

19*

160

B
91 240

140

273* 240

110

Height/Width/Depth

160 / 260 / 91 mm

XX* only for 9526970000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573600000 9526970000 Order No. 9529250000 1937730000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x38 1x32 1x24 1x19 1x16

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910120000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9511230000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073120000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 27 23 13 8 4 3 C/D 8 6 3 2 1 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9527590000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

245 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

230

B.90

145

Klippon K - Aluminium enclosures

Klippon K 7

Depth

100 mm Enclosures

93

83

350

350 160 114

17*

330

7.5*

100

330

140

362.8*

Height/Width/Depth

160 / 350 / 100 mm

XX* only for 9526980000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0342600000 9526980000 Order No. 9529260000 1937880000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x55 1x46 1x34 1x27 1x23

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910130000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9525030000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073130000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 42 26 17 10 6 5 C/D 8 6 3 2 2 1

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9529080000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

334 2

314

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

144

B.91

Klippon K - Aluminium enclosures

Klippon K 71 Enclosures

Depth

111 mm

102

93

19*

7.5*

280

111

230

260 292.4* 260

180

210

Height/Width/Depth

230 / 280 / 111 mm

XX* only for 9526990000

Ordering data
Powder-coated (RAL 7001) Standard (CR seal) Standard (silicone seal)** Natural finish (unpainted) Standard (CR seal) Ex enclosure (silicone seal) Note 0573700000 9526990000 Order No. 9529270000 1937720000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 2x42 2x35 2x26 2x21

The colours of painted enclosures may vary under certain circumstances. **Delivery time available on request.

Accessories
Terminal rail, Set 35 mm width Order No. 1910140000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue or the SAK series. We recommend BK 12 or BK 12 CRN (0625320000) for vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Earth bar, Set 9511190000

Number of cable entries

Mounting plate Steel sheet, galvanised 3073140000 Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 42 30 21 12 10 4 3 C/D 28 18 10 8 3 2 2

Hinge, diecast zinc, Set 1580360000

External mounting feet, set of 4 9527590000

**Our IP68 brass cable glands are used as the reference for these guideline values.

Torx screwdriver Uninsulated Torx TH20 9009160000

Dimensions of mounting plate

264 250 2

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.92

213

80

B.93

Enclosures

Klippon POK - Polyester enclosures

Enclosures

Polyester enclosures

The Klippon POK range is based on a high-quality glass fibrereinforced polyester enclosure which represents an economical solution for electrical connections. The enclosures are ideal wherever corrosion resistance, impact resistance and a high IP protection class are required. Features of the enclosure range: 17 sizes and 2 versions Stainless Steel lid screws Fixing holes located outside the sealed area Threaded holes for mounting rails Approved to the latest international standards Our assembly service can supply these enclosures preassembled with terminals and cable glands according to customer requirements.

T~\u"

Overview of enclosures Ordering data

Description Klippon POK 1 Klippon POK 2 Klippon POK 3 Klippon POK31 Klippon POK 32 Klippon POK 4 Klippon POK 5 Klippon POK 51 Klippon POK 6 Klippon POK 7 Klippon POK71 Klippon POK 8 Klippon POK 9 Klippon POK 91 Klippon POK 10 Klippon POK 11 Klippon POK 12 Dimensions 75 x 80 x 56 75 x 110 x 55 75 x 160 x 55 75 x 190 x 55 75 x 230 x 55 120 x 122 x 91 120 x 220 x 91 160 x 160 x 90 160 x 260 x 90 160 x 360 x 90 160 x 560 x 90 250 x 255 x 120 250 x 400 x 120 250 x 600 x 120 405 x 400 x 120 250 x 255 x 160 250 x 400 x 160 Standard 1277200000 1277300000 1277400000 1565400000 9510510000 1277500000 1277600000 1565410000 1277700000 1277800000 9510520000 1565420000 1565430000 9510470000 1565440000 9510530000 9510540000 Ex Enclosures 9510210000 9510220000 9510320000 9510330000 9510340000 9510230000 9510240000 9510250000 9510260000 9510270000 9510350000 9510280000 9510290000 9510300000 9510310000 9510360000 9510370000

B.94

Klippon POK - Polyester enclosures

Technical Overview Features

for use in hazardous area and industrial applications Extremely robust and impact resistant due to the high amount of glass fibre Approved to the latest international standards (e.g. ATEX, cULus, GOST) Note: The enclosure range Klippon POK can be assembled with terminals or other approved equipment by our Application-Specific Solutions service.

Technical data
Enclosure material Surface IP Rating Equipment mounting Enclosure mounting Lid fixing Impact Resistance Gasket material Temperature range Torque screws of lid M4* Torque screws of lid M6* Flammability Ex Glass fibre-reinforced polyester to DIN 16913 with added graphite Black, similar to RAL 9011 IP 66 M4 to M6 threaded bushes 4 holes for M4 to M6 screw M4/M6 slothead / crosshead screws from stainless steel 7J Silicone (VMQ) -55 C+100 C 2.0 - 2.5 Nm 2.5 - 3.0 Nm UL94 V0 Standard Glass fibre-reinforced polyester to DIN 16913 Grey, similar to RAL7001 IP 66 M4 to M6 threaded bushes 4 holes for M4 to M6 screws M4/M6 slothead / crosshead screws from stainless steel 7J Chloroprene -40 C+90 C 2.0 - 2.5 Nm 2.5 - 3.0 Nm UL94 V0

Toxicity Halogen and cadmium-free Halogen and cadmium-free Note: We deliver enclosures through our assembly service which are ready to be connected and suitable for every application * Depending on the screw head size, the lid can be fastened using either our slotted or cross-head screwdrivers (see chapter G)

Approvals for empty enclosures

ATEX certificate ATEX marking GOST Ex GOST cULus Lloyds Register Russian Maritime Register Germanischer Lloyd Installation Ex KEMA 02ATEX2078 U II 2 GD Ex e II POCC DE.ME92.B01149 POCC DE.ME25.B01450 Standard

11040200

POCC DE.ME25.B01450 E 223801 07/20008 11040200 4453607 HH

The Klippon POK enclosure series can be pre-fitted in our customer specific production department according to your wishes;

as an example, terminals, or other approved components, can be installed as required. Note: This enclosure range is component certified. An additional certifications is required, when other electronic equipment will be installed into the enclosure.

Approvals terminal enclosures

ATEX certificate ATEX marking Ex KEMA 03ATEX2077 Standard II 2 GD T85C/T100C Ex e II T6/T5 II 2 (1) GD T85C/T100C Ex e [ia] IIC T6/T5 II GD T85C/T100C Ex ia IIC T6/T5 IP64/IP65/IP66 Note: If you have specific requirements of equipment in hazardous area applications, please contact Weidmller to get a copy of the complete certificates.

B.95

Enclosures

Klippon POK - Polyester enclosures

Klippon POK 1 Enclosures

Depth

56 mm

(56) 15 80 41

B
75 66 59

(42,2)

Height/Width/Depth

75 / 80 / 56 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510210000 Order No. 1277200000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x5 1x4

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928060000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510570000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 4 2 1 1 C/D 1 1 1

Brass plate, cruciform 9510990000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510900000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.96

Klippon POK - Polyester enclosures

Klippon POK 2

Depth

56 mm Enclosures

(56) 15 110 41

B
75 66 89 (42,2)

Height/Width/Depth

75 / 110 / 56 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510220000 Order No. 1277300000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical 1x1* 1x1* horizontal 1x10 1x9

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928060000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510570000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 7 3 2 2 C/D 1 1 1

Brass plate, cruciform 9510990000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510900000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.97

Klippon POK - Polyester enclosures

Klippon POK 3 Enclosures

Depth

56 mm

(56) 15

B
75

160

41

139

66

(42,2)

Height/Width/Depth

75 / 160 / 56 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510320000 Order No. 1277400000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x20 1x17

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928080000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510680000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 11 5 4 3 C/D 1 1 1

Brass plate, cruciform 9511010000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510900000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.98

Klippon POK - Polyester enclosures

Klippon POK 31

Depth

56 mm Enclosures

(56) 15 190 41

75

169

66

(33)

Height/Width/Depth

75 / 190 / 56 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510330000 Order No. 1565400000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x26 1x22

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928080000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510690000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 14 6 5 4 C/D 1 1 1

Brass plate, cruciform 9511020000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510900000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only one hinge is required to be fitted to the longest side.

B.99

Klippon POK - Polyester enclosures

Klippon POK 32 Enclosures

Depth

56 mm

56 15 230 41

B
75 209 66 (42)

Height/Width/Depth

75 / 230 / 56 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510340000 Order No. 9510510000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * horizontal 1x33 1x28

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928100000

Note

*Please refer to the Terminal Block Catalogue or the SAK Series for more information about populating the enclosures with terminal blocks. We recommend at most one BK 6 or BK 6 CRN (0625220000) in vertical installations. There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510700000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 16 6 6 4 C/D 1 1 1

Brass plate, cruciform 9511030000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510900000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.100

Klippon POK - Polyester enclosures

Klippon POK 4

Depth

91 mm Enclosures

91 25 122 66

B
120 111 95

80

Height/Width/Depth

120 / 122 / 91 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510230000 Order No. 1277500000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x12 1x10 1x7 1x6 1x5

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928110000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510590000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 12 6 4 5 4 C/D 8 4 3 1 1

Brass plate, cruciform 9511040000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.101

Klippon POK - Polyester enclosures

Klippon POK 5 Enclosures

Depth

91 mm

91 25 220 66

B
1 20

204

Height/Width/Depth

120 / 220 / 91 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510240000 Order No. 1277600000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x31 1x26 1x19 1x15 1x13

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928120000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510600000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 24 14 12 5 4 3 C/D 8 4 3 1 1

Brass plate, cruciform 9511050000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.102

111

Klippon POK - Polyester enclosures

Klippon POK 51

Depth

90 mm Enclosures

(90) 20 160 70

B
160 148 132

(76)

Height/Width/Depth

160 / 160 / 90 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510250000 Order No. 1565410000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x17 1x14 1x11 1x9 1x7

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928130000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510610000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 15 12 6 3 2 2 C/D 11 6 4 2 2 1

Brass plate, cruciform 9511060000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.103

Klippon POK - Polyester enclosures

Klippon POK 6 Enclosures

Depth

90 mm

(90) 20 260 70

B
160 148 232

(76)

Height/Width/Depth

160 / 260 / 90 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510260000 Order No. 1277700000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x36 1x30 1x23 1x16 1x16

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928140000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510620000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 30 24 14 5 4 3 C/D 11 6 4 2 2 1

Brass plate, cruciform 9511070000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.104

Klippon POK - Polyester enclosures

Klippon POK 7

Depth

90 mm Enclosures

(90) 20 360 70

B
160 148 332

(76)

Height/Width/Depth

160 / 360 / 90 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510270000 Order No. 1277800000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x56 1x47 1x36 1x29 1x24

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928150000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510630000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 45 36 20 8 6 5 C/D 11 6 4 2 2 1

Brass plate, cruciform 9511080000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.105

Klippon POK - Polyester enclosures

Klippon POK 71 Enclosures

Depth

90 mm

(90)

20 560 70

B
160 148 (76)

532

Height/Width/Depth

160 / 560 / 90 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510350000 Order No. 9510520000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 1x94 1x79 1x60 1x49 1x41

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928160000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510710000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 66 58 32 12 10 8 C/D 11 6 4 2 2 1

Brass plate, cruciform 9511090000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.106

Klippon POK - Polyester enclosures

Klippon POK 8

Depth

120 mm Enclosures

(120) 25 255 95

B
250 238 227

(106)

Height/Width/Depth

250 / 255 / 120 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510280000 Order No. 1565420000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 2x38 2x31 2x23 2x19 2x15

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928170000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510640000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 36 32 10 10 8 3 2 C/D 32 21 15 8 3 3 2

Brass plate, cruciform 9511100000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.107

Klippon POK - Polyester enclosures

Klippon POK 9 Enclosures

Depth

120 mm

(120) 25

B
250

400

95

372

238

(106)

Height/Width/Depth

250 / 400 / 120 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510290000 Order No. 1565430000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 2x67 2x55 2x41 2x33 2x27

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928180000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510650000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 62 54 33 18 14 6 4 C/D 32 21 15 8 3 3 2

Brass plate, cruciform 9511110000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.108

Klippon POK - Polyester enclosures

Klippon POK 91

Depth

120 mm Enclosures

(120) 25 600 95

250

572

238 (106)

Height/Width/Depth

250 / 600 / 120 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510300000 Order No. 9510470000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 2x107 2x89 2x66 2x53 2x44

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928190000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no pre-defined mounting points set within this enclosure for installing internal equipment in a vertical position.

Mounting plate Steel sheet, galvanised 9510660000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 96 80 24 20 20 8 6 C/D 32 21 15 8 3 3 2

Brass plate, cruciform 9511120000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.109

Klippon POK - Polyester enclosures

Klippon POK 10 Enclosures

Depth

120 mm

(120) 25 400 95

B
405 393

372

(106)

Height/Width/Depth

405 / 400 / 120 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510310000 Order No. 1565440000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 3x67 3x55 3x41 3x33 3x27

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928180000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no prescribed possible attachment points in the enclosures for vertical installations.

Mounting plate Steel sheet, galvanised 9510670000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 62 54 33 18 14 6 4 C/D 60 39 30 18 7 5 4

Brass plate, cruciform 9511130000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.110

Klippon POK - Polyester enclosures

Klippon POK 11

Depth

160 mm Enclosures

(160) 255 95 65

B
250 238 227

(146)

Height/Width/Depth

250 / 255 / 160 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510360000 Order No. 9510530000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 2x38 2x31 2x23 2x19 2x15

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928170000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no prescribed possible attachment points in the enclosures for vertical installations.

Mounting plate Steel sheet, galvanised 9510640000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 36 32 18 10 8 3 2 C/D 32 21 15 8 3 3 2

Brass plate, cruciform 9511100000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.111

Klippon POK - Polyester enclosures

Klippon POK 12 Enclosures

Depth

160 mm

(160) 400 95 65

B
250 238 372

(146)

Height/Width/Depth

250 / 400 / 160 mm

Ordering data
RAL 7001 Standard, grey RAL 9011 Enclosure for hazardous areas (Ex), black Note 9510370000 Order No. 9510540000

Max. number of terminals (industry)

Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm vertical * * * * * horizontal 2x67 2x55 2x41 2x33 2x27

The overview page lists the ambient temperatures. The colours of painted enclosures may vary under certain circumstances.

Accessories
Terminal rail, Set 15 mm width Order No. 1928180000

Note

The mounting rails are designed to be installed directly. Assembly with terminals provides for 10 mm clearance to the ends of the mounting rail. Ordering recommendations: TS 35 mounting rail (screw-type terminals) WDU 2.5 1020000000 / (tension clamp terminals) ZDU 2.5 1608510000 *There are no prescribed possible attachment points in the enclosures for vertical installations.

Mounting plate Steel sheet, galvanised 9510650000

Mild steel nickel plated Spacer M6 x 8, set of 2 15 mm length 20 mm length 30 mm length Hinge, diecast zinc, Set 1580360000 3896100000 3896200000 3896300000

Number of cable entries

Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 Note A/B 62 54 33 18 14 6 4 C/D 32 21 15 8 3 3 2

Brass plate, cruciform 9511110000

**Our IP68 plastic cable glands fitted without a bruss plate (cruciform) serve as a reference for these recommended values.

External mounting feet, set of 4 9510910000

Note

Accessories described above as sets, are supplied with fixing materials. For this enclosure only two hinges are required to be fitted to the longest side.

B.112

B.113

Enclosures

TBF - Polyester enclosures

Enclosures

Large polyester enclosures

The enclosures in the TBF series are made from sturdy glassfibre reinforced polyester. They offer a universal solution for enclosing controllers, measuring instruments, valves and other devices. Some of the many advantages of these cases are: Available in 9 sizes, with grey or transparent lids The lid has nylon screws fitted Mounting holes are outside the sealed area Thread for fitting to terminal rails and mounting plates Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

"
Overview of enclosures Ordering data
Description TBF 19/15 TBF 30/19 TBF 30/30 TBF 37/30 TBF 49/30 TBF 56/30 TBF 60/30 TBF 60/37 TBF 60/60
Note:

Dimensions 186 x 151 x 140 302 x 186 x 175 302 x 302 x 175 372 x 302 x 175 488 x 302 x175 / 210 558 x 302 x 175 / 210 603 x 302 x 175 / 210 603 x 372 x 175 / 210 603 x 603 x 175 / 210

Grey lid 0360100000 0360200000 0360300000 0360400000 9502800000 9502810000 0360500000 9502860000 9502830000

Transparent lid 0500500000 0500600000 0500700000 0500800000 9502800000 9502810000 0500900000 9502860000 9502870000

B.114

TBF - Polyester enclosures

Technical Overview Features

Extremely tough and impact resistant thanks to the glass-fibre reinforced polyester Extremely weather resistant High IP rating Approved according to the latest international standards (e.g. GOST) Note: We deliver enclosures through our assembly service which are ready to be connected and suitable for every application.

Technical data
Enclosure material Surface finish IP protection class Installation mounting Enclosure mounting Lid fixing Impact resistance Gasket material Temperature range Flammability characteristics Toxicity Note: Grey lid Base and lid made of glass-fibre reinforced polyester (GRP) grey, similar to RAL 7035 IP 67 4 or 6 M4 clamping screws 4 holes of 7 mm diameter or with external fastening lugs, see accessories 4 or 6 captive cross-headed nylon screws 4J Polyurethane -50 C...+150 C UL 94 HB Free from halogens Transparent lid Base made of glass-fibre reinforced polyester (GRP) Lid is polycarbonate (PC) IP 66 4 or 6 M4 clamping screws 4 holes of 7 mm diameter or with external fastening lugs, see accessories 4 or 6 captive cross-headed nylon screws 7J Polyurethane -50 C...+130 C V2 Free from halogens

B.115

Enclosures

TBF - Polyester enclosures

TBF 19/15 Enclosures

140 mm

TBF 30/19

175 mm

C 151 131

95 A E

D 140 C

210 A

D 175

186 166

125

C B 166 186 A

90

115

B 282 302 A

150

Height/Width/Depth

186 x 151 x 140 mm

302 x 186 x 175 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x11 1x9 1x7 1x6 1x4 1x3 A/B 11 6 2 2 1 1 horizontal 1x18 1x15 1x7 1x9 1x6 1x5 C/D 11 6 2 2 1 1 vertical 2x22 2x18 2x14 2x11 2x8 2x7 A/B 28 14 11 6 3 3 1 1 horizontal 1x44 1x37 2x14 1x22 1x16 1x14 C/D 53 30 22 10 5 3 3 2

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type TBF 19/15/14 7035 TBF 19/15/14 trsp Qty. 1 1 Order No. 0360100000 0500500000 Type TBF 30/19/18 7035 TBF 30/19/18 trsp Qty. 1 1 Order No. 0360200000 0500600000

Accessories
Mounting plate Steel sheet, galvanised Type MP TBF 19/15 Qty. 1 Order No. 9502720000 Type MP TBF 30/19 Qty. 1 Order No. 3018950000

External mounting lug, set of 4 Polyamide MF TBF 1 0360800000 MF TBF 1 0360800000

Earthing stud M6, Brass M6, Stainless steal M10, Brass M10, Stainless steal Spacer 15 mm length SP TBF 15 50 9503170000 SP TBF 15 50 9503170000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000

Expansion frame Polyamide EF TBF 19/15 1 9502930000

Note

If using an extension frame, the protection class (IP) is reduced.

B.116

TBF - Polyester enclosures

TBF 30/30

175 mm

TBF 37/30

175 mm Enclosures

210 A

D 175

D C E 280 A 175

302 282

240

302 282

240

B 282 302 A

150

B 352 372 A

150

Height/Width/Depth

302 x 302 x 175 mm

372 x 302 x 175 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 2x44 2x37 2x28 2x22 2x16 2x14 A/B 44 24 20 10 4 3 3 2 horizontal 1x44 1x37 2x28 1x22 1x16 1x14 C/D 44 24 20 10 4 3 3 2 vertical 2x57 2x48 2x36 2x29 2x21 2x18 A/B 44 24 20 10 4 3 3 2 horizontal 2x44 2x37 2x36 2x22 2x16 2x14 C/D 56 30 27 12 5 4 4 3

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type TBF 30/30/18 7035 TBF 30/30/18 trsp Qty. 1 1 Order No. 0360300000 0500700000 Type TBF 37/30/18 7035 TBF 37/30/18 trsp Qty. 1 1 Order No. 0360400000 0500800000

Accessories
Mounting plate Steel sheet, galvanised Type MP TBF 30/30 Qty. 1 Order No. 9502730000 Type MP TBF 37/30 Qty. 1 Order No. 9502740000

External mounting lug, set of 4 Polyamide MF TBF 1 0360800000 MF TBF 1 0360800000

Earthing stud M6, Brass M6, Stainless steal M10, Brass M10, Stainless steal Spacer 15 mm length SP TBF 15 50 9503170000 SP TBF 15 50 9503170000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000

Expansion frame Polyamide EF TBF 30/30 1 9502950000 EF TBF 37/30 1 9502960000

Note

If using an extension frame, the protection class (IP) is reduced.

If using an extension frame, the protection class (IP) is reduced.

B.117

TBF - Polyester enclosures

TBF 49/30 Enclosures

210 mm

TBF 56/30

210 mm

E 396 C A

D 175 C

466 E A

D 175

302 281

302 281

240

240

B 467 488 A

150

B 537 558

150

Height/Width/Depth

488 x 302 x 210 mm

558 x 302 x 210 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 2x80 2x67 2x51 2x41 2x29 2x25 A/B 44 24 20 10 4 3 3 2 horizontal 3x44 3x37 2x51 3x22 3x16 3x14 C/D 42 42 36 18 7 5 5 4 vertical 2x94 2x79 2x59 2x48 2x34 2x30 A/B 44 24 20 10 4 3 3 2 horizontal 4x44 4x37 2x59 4x22 4x16 4x14 C/D 80 46 40 18 8 6 4 4

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type TBF 49/30/18 7035 TBF 49/30/21 trsp Qty. 1 1 Order No. 9502800000 9502840000 Type TBF 56/30/18 7035 TBF 56/30/21 trsp Qty. 1 1 Order No. 9502810000 9502850000

Grey lid: 130 mm internal height, 175 mm total height Transparent lid: 160mm internal height, 210 mm total height

Grey lid: 130 mm internal height, 175 mm total height Transparent lid: 160mm internal height, 210 mm total height

Accessories
Mounting plate Steel sheet, galvanised Type MP TBF 49/30 Qty. 1 Order No. 9500960000 Type MP TBF 56/30 Qty. 1 Order No. 9500950000

External mounting lug, set of 4 Polyamide MF TBF 1 0360800000 MF TBF 1 0360800000

Earthing stud M6, Brass M6, Stainless steal M10, Brass M10, Stainless steal Spacer 15 mm length SP TBF 15 50 9503170000 SP TBF 15 50 9503170000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000

Note

B.118

TBF - Polyester enclosures

TBF 60/30

210 mm Enclosures
D 175 D 240 E 150

511 A

302

281

B 582 603 A

Height/Width/Depth

603 x 302 x 210 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 5x44 5x37 5x28 5x22 5x16 5x14 A/B 44 24 20 10 4 3 3 2 horizontal 1x101 1x85 5x28 1x51 1x37 1x32 C/D 88 48 40 20 8 6 6 4

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type TBF 60/30/18 7035 TBF 60/30/21 trsp Qty. 1 1 Order No. 0360500000 0500900000

Grey lid: 130 mm internal height, 175 mm total height Transparent lid: 160mm internal height, 210 mm total height

Accessories
Mounting plate Steel sheet, galvanised Type MP TBF 60/30 Qty. 1 Order No. 9502750000

External mounting lug, set of 4 Polyamide MF TBF 1 0360800000

Earthing stud M6, Brass M6, Stainless steal M10, Brass M10, Stainless steal Spacer 15 mm length SP TBF 15 50 9503170000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000

Expansion frame Polyamide EF TBF 60/30 1 9502990000

Note

If using an extension frame, the protection class (IP) is reduced.

B.119

TBF - Polyester enclosures

TBF 60/37 Enclosures

210 mm

TBF 60/60

210 mm

D C E 603 A 175 C E 510 A

D 175

372

351

310

E 605 582 540 C D E

B 511 582 A

150 B 582 603 A 150

603

Height/Width/Depth

603 x 372 x 210 mm

603 x 605 x 210 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 5x57 5x48 5x36 5x29 5x21 5x18 A/B 52 30 26 12 5 4 4 3 horizontal 2x101 2x85 5x36 2x51 2x37 2x32 C/D 88 48 40 20 8 6 6 4 vertical 5x101 5x85 5x64 5x51 5x37 5x32 A/B 88 48 40 20 8 6 6 4 horizontal 4x101 4x85 5x64 4x51 4x37 4x32 C/D 88 48 40 20 8 6 6 4

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type TBF 60/37/18 7035 TBF 60/37/21 trsp Qty. 1 1 Order No. 9502820000 9502860000 Type TBF 60/60/18 7035 TBF 60/60/21 trsp Qty. 1 1 Order No. 9502830000 9502870000

Grey lid: 130 mm internal height, 175 mm total height Transparent lid: 160mm internal height, 210 mm total height

Grey lid: 130 mm internal height, 175 mm total height Transparent lid: 160mm internal height, 210 mm total height

Accessories
Mounting plate Steel sheet, galvanised Type MP TBF 60/37 Qty. 1 Order No. 9502910000 Type MP TBF 60/60 Qty. 1 Order No. 9502920000

External mounting lug, set of 4 Polyamide MF TBF 1 0360800000 MF TBF 1 0360800000

Earthing stud M6, Brass M6, Stainless steal M10, Brass M10, Stainless steal Spacer 15 mm length SP TBF 15 50 9503170000 SP TBF 15 50 9503170000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000 ES TBF M6 brass ES TBF M6 ss ES TBF M10 brass ES TBF M10 ss 1 1 1 1 9502700000 9505240000 9502710000 9500870000

Expansion frame Polyamide EF TBF 60/37 1 9503000000 EF TBF 60/60 1 9503010000

Note

If using an extension frame, the protection class (IP) is reduced.

If using an extension frame, the protection class (IP) is reduced.

B.120

B.121

Enclosures

MPC - Polycarbonate enclosures

Enclosures

Small polycarbonate enclosures

The polycarbonate enclosures of the MPC series are ideal for enclosing electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The characteristics of the enclosures are: Available in 17 sizes, with grey or transparent lids Lid fixing screws equipped with sealing holes Fixing holes outside the sealed area Thread for fitting to terminal rails, mounting plates and PCBs Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

"
Overview of enclosures Ordering data
Description MPC 07/12/07 MPC 07/12/10 MPC 07/12/12 MPC 12/12/07 MPC 12/12/10 MPC 12/12/12 MPC 12/17/07 MPC 12/17/10 MPC 12/17/12 MPC 12/17/15 MPC 17/17/07 MPC 17/17/10 MPC 17/17/12 MPC 17/17/15 MPC 17/25/10 MPC 18/25/07 MPC 18/25/15
Note:

Dimensions 75 x 125 x 75 75 x 125 x 100 75 x 125 x 120 120 x 120 x 75 120 x 120 x 100 120 x 120 x 120 120 x 175 x 75 120 x 175 x 100 120 x 175 x 120 120 x 175 x 150 175 x 175 x 75 175 x 175 x 100 175 x 175 x 120 175 x 175 x 150 175 x 250 x 100 180 x 250 x 75 180 x 250 x150

Grey lid 9535170000 9535190000 9535210000 9535230000 9535250000 9535270000 9535290000 9535310000 9535330000 9535350000 9535370000 9535390000 9535410000 9535430000 9535450000 9535470000 9535490000

Transparent lid 9535180000 9535200000 9535220000 9535240000 9535260000 9535280000 9535300000 9535320000 9535340000 9535360000 9535380000 9535400000 9535420000 9535440000 9535460000 9535480000 9535500000

B.122

MPC - Polycarbonate enclosures

Technical Overview Features

High thermal stability thanks to the polycarbonate Extremely tough and impact resistant thanks to the high fibre-glass content. Good IP rating, due to use of polyurethane (PUR) gasket material Approved according to the latest international standards Note: We deliver enclosures through our assembly service which are ready to be connected and suitable for every application.

Technical data
Enclosure material Cover Surface finish IP protection class Installation mounting Enclosure mounting Lid fixing Gasket material Temperature range Note: Polycarbonate Grey or transparent grey, similar to RAL 7035 IP 66, IP 67 Self-tapping screws 4 holes (4.5 mm diameter) or external mounting brackets (optional) 4 cross-head screws (polyamide) Polyurethane foam -50 C...+130 C

B.123

Enclosures

MPC - Polycarbonate enclosures

MPC 07/12/07 Enclosures

75 mm

MPC 07/12/12

125 mm

B 60.5

C D F 60 C 125 A D E 75 25 D 75 F F C B 110 A A 60 125 A 75 D E

110.5

C 125 75

B 110

Height/Width/Depth

125 x 75 x 75 mm

125 x 75 x 125 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x13 1x11 1x8 1x6 horizontal 1x13 1x11 1x8 1x6 vertical 1x13 1x11 1x8 1x6 1x5 1x4 A/B 1 1 1 horizontal 1x13 1x11 1x8 1x6 1x1 1x1 C/D 4 3 3

A/B 1 1 1

C/D 4 3 3

It is possible to mount the WDU terminal blocks on a TS 35.

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type MPC 07/12/07 7035 MPC 07/12/07 trsp Qty. 1 1 Order No. 9535170000 9535180000 Type MPC 07/12/12 7035 MPC 07/12/12 trsp Qty. 1 1 Order No. 9535210000 9535220000

Accessories
Mounting plate Steel sheet, galvanised Type MP MPC 07/12 Qty. 10 Order No. 9535540000 Type MP MPC 07/12 Qty. 10 Order No. 9535540000

External mounting lug, set of 4 MF MPC 1 9535600000 MF MPC 1 9535600000

Hinge, set of 2 HG MPC 1 9535590000 HG MPC 1 9535590000

Note

B.124

MPC - Polycarbonate enclosures

MPC 12/12/07

75 mm

MPC 12/17/07

75 mm Enclosures
F

B 60.5 60.5

125 F A

C 75

C 25 D F 110 C B 160 175 A D 125 E 75 25

110

125

B 110 A

Height/Width/Depth

125 x 125 x 75 mm

175 x 125 x 75 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x13 1x11 1x8 1x6 horizontal 1x13 1x11 1x8 1x6 vertical 1x22 1x19 1x14 1x11 horizontal 1x22 1x19 1x14 1x11

A/B 4 3 3

C/D 4 3

A/B 4 3 3

C/D 6 4 4

It is possible to mount the WDU terminal blocks on a TS 35.

It is possible to mount the WDU terminal blocks on a TS 35.

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type MPC 12/12/07 7035 MPC 12/12/07 trsp Qty. 1 1 Order No. 9535230000 9535240000 Type MPC 12/17/07 7035 MPC 12/17/07 trsp Qty. 1 1 Order No. 9535290000 9535300000

Accessories
Mounting plate Steel sheet, galvanised Type MP MPC 12/12 Qty. 10 Order No. 9535550000 Type MP MPC 12/17 Qty. 10 Order No. 9535560000

External mounting lug, set of 4 MF MPC 1 9535600000 MF MPC 1 9535600000

Hinge, set of 2 HG MPC 1 9535590000 HG MPC 1 9535590000

Note

B.125

MPC - Polycarbonate enclosures

MPC 12/17/10 Enclosures

100 mm

MPC 12/17/12

125 mm

B 85.5

175 A

C 100

50

110.5

175

125 75

110

110

B 160 A

160

Height/Width/Depth

175 x 125 x 100 mm

175 x 125 x 125 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x22 1x19 1x14 1x11 1x9 1x7 A/B 4 3 3 horizontal 1x22 1x19 1x14 1x11 1x5 1x4 C/D 6 4 4 vertical 1x13 1x11 1x8 1x6 1x5 1x4 A/B 4 3 3 horizontal 1x22 1x19 1x8 1x11 1x5 1x4 C/D 6 4 4

It is possible to mount the WDU terminal blocks on a TS 35.

It is possible to mount the WDU terminal blocks on a TS 35.

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type MPC 12/17/10 7035 MPC 12/17/10 trsp Qty. 1 1 Order No. 9535310000 9535320000 Type MPC 12/17/12 7035 MPC 12/17/12 trsp Qty. 1 1 Order No. 9535330000 9535340000

Accessories
Mounting plate Steel sheet, galvanised Type MP MPC 12/17 Qty. 10 Order No. 9535560000 Type MP MPC 12/17 Qty. 10 Order No. 9535560000

External mounting lug, set of 4 MF MPC 1 9535600000 MF MPC 1 9535600000

Hinge, set of 2 HG MPC 1 9535590000 HG MPC 1 9535590000

Note

B.126

125

125

MPC - Polycarbonate enclosures

MPC 17/17/07

75 mm Enclosures
F

B 60.5

C D F 175 A 75 25

160

175

B 160

Height/Width/Depth

175 x 175 x 75 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x22 1x19 1x14 1x11 horizontal 1x22 1x19 1x14 1x11

A/B 6 4 4

C/D 6 4

It is possible to mount the WDU terminal blocks on a TS 35.

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type MPC 17/17/07 7035 MPC 17/17/07 trsp Qty. 1 1 Order No. 9535370000 9535380000

Accessories
Mounting plate Steel sheet, galvanised Type MP MPC 17/17 Qty. 10 Order No. 9535570000

External mounting lug, set of 4 MF MPC 1 9535600000

Hinge, set of 2 HG MPC 1 9535590000

Note

B.127

MPC - Polycarbonate enclosures

MPC 17/17/15 Enclosures

150 mm

MPC 17/25/10

100 mm

B 85.5

135.5

C D F 175 A 150 100 250 D F A

C 100 50

160

B 160 A

160

B 235 A

Height/Width/Depth

175 x 175 x 150 mm

250 x 175 x 100 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x22 1x19 1x14 1x11 1x9 1x7 A/B 6 4 4 horizontal 1x22 1x19 1x14 1x11 1x9 1x7 C/D 6 4 vertical 1x37 1x31 1x23 1x19 1x15 1x11 A/B 6 4 4 horizontal 1x37 1x31 1x23 1x19 1x9 1x7 C/D 9 7 6

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type MPC 17/17/15 7035 MPC 17/17/15 trsp Qty. 1 4 Order No. 9535430000 9535440000 Type MPC 17/25/10 7035 MPC 17/25/10 trsp Qty. 1 1 Order No. 9535470000 9535480000

Accessories
Mounting plate Steel sheet, galvanised Type MP MPC 17/17 Qty. 10 Order No. 9535570000 Type MP MPC 17/25 Qty. 1 Order No. 9535580000

External mounting lug, set of 4 MF MPC 1 9535600000 MF MPC 1 9535600000

Hinge, set of 2 HG MPC 1 9535590000 HG MPC 1 9535590000

Note

B.128

175

175

B.129

Enclosures

FPC - Polycarbonate enclosures

Enclosures

Medium-sized polycarbonate enclosures

The FPC enclosure series is the next generation of the MPC series. The enclosures have the same technical characteristics and are ideal for enclosing electrical, electro-mechanical and pneumatic devices and PCBs. The enclosures are used in situations where extreme mechanical and chemical conditions exist. The characteristics of the enclosures are: Available in 6 sizes, with grey or transparent lids Lid fixing screws equipped with sealing holes Fixing holes outside the sealed area Thread for fitting to terminal rails, mounting plates and PCBs Weidmller can manufacture and supply this enclosure to match customer specifications and fitted with all necessary terminals and cable glands.

"
Overview of enclosures Ordering data
Description FPC 20/20/13 FPC 20/30/13 FPC 20/40/13 FPC 30/30/13 FPC 30/40/13 FPC 40/60/13
Note:

Dimensions [mm] 200 x 200 x 130 300 x 200 x 130 400 x 200 x 130 300 x 300 x 130 400 x 300 x 130 600 x 400 x 130

Grey lid 9535690000 9535710000 9535730000 9535750000 9535770000 9535810000

Transparent lid 9535680000 9535700000 9535720000 9535740000 9535760000 9535820000

Technical data
Enclosure material Cover Surface finish IP protection class Installation mounting Enclosure mounting Lid fixing Gasket material Temperature range Note: Polycarbonate Grey or transparent Grey, similar to RAL 7035 IP 66, IP 67 Self-tapping screws 4 holes (7.5 mm diameter) or external mounting brackets (optional) 4 cross-head screws (polyamide) Polyurethane foam -50 C...+130 C

B.130

B.131

Enclosures

FPC - Polycarbonate enclosures

FPC 20/20/13 Enclosures

132 mm

FPC 20/30/13

132 mm

B 115

115

C D 200 F A 132 30 D F 300 A C 132 30

200

180

180

200

B 180 A

B 280

Height/Width/Depth

200 x 200 x 132 mm

200 x 300 x 132 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 1x17 1x14 1x10 1x8 1x7 1x5 A/B 20 11 6 4 2 1 1 1 horizontal 1x17 1x14 1x10 1x8 1x7 1x5 C/D 20 11 6 4 2 1 1 1 vertical 2x20 2x17 2x13 2x10 2x8 2x6 A/B 38 21 12 8 3 3 2 2 horizontal 1x40 1x33 2x13 1x20 1x17 1x12 C/D 20 11 6 4 2 1 1 1

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type FPC 20/20/13 7035 FPC 20/20/13 trsp Qty. 1 1 Order No. 9535690000 9535680000 Type FPC 20/30/13 7035 FPC 20/30/13 trsp Qty. 1 1 Order No. 9535710000 9535700000

Accessories
Mounting plate Steel sheet, galvanised Type MP FPC 20/20 Qty. 1 Order No. 9535920000 Type MP FPC 20/30 Qty. 1 Order No. 9535930000

External mounting lug, set of 4 MF FPC 1 9536040000 MF FPC 1 9536040000

Hinge, set of 2 HG FPC 1 9535990000 HG FPC 1 9535990000

Note

B.132

FPC - Polycarbonate enclosures

FPC 20/40/13

132 mm

FPC 30/30/13

132 mm Enclosures
F

B 115 115

C D 400 F 180 C B 380 A 200 D E 132 30 D F

300 A

C 132 30

280

300

B 280

Height/Width/Depth

200 x 400 x 132 mm

300 x 300 x 132 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 3x20 3x17 3x13 3x10 3x8 3x6 A/B 56 30 18 12 5 4 4 3 horizontal 1x59 1x49 3x13 1x30 1x25 1x19 C/D 20 11 6 4 2 1 1 1 vertical 2x40 2x33 2x25 2x20 2x17 2x12 A/B 38 21 12 8 3 3 2 2 horizontal 1x40 1x33 2x25 1x20 1x17 1x12 C/D 38 21 12 8 3 3 2 2

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type FPC 20/40/13 7035 FPC 20/40/13 trsp Qty. 1 1 Order No. 9535730000 9535720000 Type FPC 30/30/13 7035 FPC 30/30/13 trsp Qty. 1 1 Order No. 9535750000 9535740000

Accessories
Mounting plate Steel sheet, galvanised Type MP FPC 20/40 Qty. 1 Order No. 9535940000 Type MP FPC 30/30 Qty. 1 Order No. 9535950000

External mounting lug, set of 4 MF FPC 1 9536040000 MF FPC 1 9536040000

Hinge, set of 2 HG FPC 1 9535990000 HG FPC 1 9535990000

Note

B.133

FPC - Polycarbonate enclosures

FPC 30/40/13 Enclosures

132 mm

FPC 40/60/13

132 mm

B 115 115

400 A

C 132 30

C D 600 F A 132 30

380

280

300

400

B 380 A

B 580

Height/Width/Depth

300 x 400 x 132 mm

400 x 600 x 132 mm

Technical data
Assembly with terminal 2.5 mm 4 mm 6 mm 10 mm 16 mm 35 mm Number of cable entries M12 M16 M20 M25 M32 M40 M50 M63 M75 Note vertical 3x40 3x33 3x25 3x20 3x17 3x12 A/B 56 30 18 12 5 4 4 3 horizontal 1x59 1x49 3x25 1x30 1x25 1x19 C/D 38 21 12 8 3 3 2 2 vertical 5x59 5x49 5x37 5x30 5x25 5x19 A/B 76 42 24 16 6 6 4 4 horizontal 2x97 2x81 5x37 2x49 2x41 2x31 C/D 56 30 18 12 5 4 4 3

Ordering data
Enclosure with grey lid Enclosure with transparent lid Note Type FPC 30/40/13 7035 FPC 30/40/13 trsp Qty. 1 1 Order No. 9535770000 9535760000 Type FPC 40/60/13 7035 FPC 40/60/13 trsp Qty. 1 1 Order No. 9535810000 9535820000

Accessories
Mounting plate Steel sheet, galvanised Type MP FPC 30/40 Qty. 1 Order No. 9535960000 Type MP FPC 40/60 Qty. 1 Order No. 9535980000

External mounting lug, set of 4 MF FPC 1 9536040000 MF FPC 1 9536040000

Hinge, set of 2 HG FPC 1 9535990000 HG FPC 1 9535990000

Note

B.134