ZAXIS-7G series

HYDRAULIC EXCAVATOR
Model code : ZX350H-7G / ZX350LCH-7G
Engine rated power : 200 kW (268HP)
Operating weight : 33 600 - 35 400 kg
Bucket capacity : 2.00 m3 - 2.30 m3

230907_ZX350-7G_EN 270624.indd 1 27/6/24 6:02 PM

 ZX350-7G
GET MORE FROM INSIDE

YOUR MACHINE
You’re at the heart of Hitachi Construction Machinery's design for its latest range of excavators. To continuously 4-5
MORE FUEL
EFFICIENCY
6-7
BETTER
OPERABILITY
8-9
HIGH DURABILITY
AND RELIABILITY
improve on previous generation machines, we’ve focused on enhancing your profit in business.

We have made cost reduction for our customers our top priority and, in doing so, have achieved reduced fuel
consumption. The cab has been redesigned to improve the operator's working environment and controllability,
with production also expected to improve. An engine that already has a proven track record of high reliability
has been adopted, and we have placed further work in it to make it even more robust.
SMOOTH
10-11 MAINTENANCE

2 3

230907_ZX350-7G_EN 270624.indd 2-3 27/6/24 6:02 PM

 MORE FUEL

ZX350-7G
EFFICIENCY
Improved HISOIII hydraulic system matched with a new engine improves the ZX-7G fuel efficiency and
fuel cost.

mode mode
Fuel consumption Fuel consumption
Reducing fuel consumption

16% 15%
reduced by reduced by
With the reduction of fuel consumption in each mode compared to
conventional models, the new model will contribute to increasing your
profit.
Compared to Compared to
ZX330-5G PWR mode ZX330-5G ECO mode

HIOS III hydraulic system

The hydraulic system developed was based on the concept of a
hydraulic system that fits in-line with a sense of human operation.
Efficient hydraulic control achieves smoother and more speedy
movement of front attachments.

Fine-tuned hydraulic pump control

A solenoid valve mounted on the hydraulic system further controls the
pump flow rate to reduce unnecessary load on the engine.
Contributing to low fuel consumption operation

High efficiency engine

A common rail type fuel injection system is used to electronically control
fuel quantity and injection timing for more efficiency in fuel combustion.
Contributing to high engine power and low fuel consumption.

Operation support system for high efficiency

ECO gauge
A gauge displays the current fuel consumption during an operation
with a higher mark on the gauge indicating a lower fuel usage. The
eco-gauge helps to support the operator in achieving lower fuel
consumption throughout the work required.

ECO guidance ECO gauge

Prompts the operator to better fuel economy.
Messages are also shown while the ECO gauge is displayed.

Prompts operator for better economy

ECO guidance

4 5

230907_ZX350-7G_EN 270624.indd 4-5 27/6/24 6:02 PM

 BETTER

ZX350-7G
OPERABILITY
In the cab of the Zaxis-7G, enhanced comfort and safety features are
at your fingertips, offering the power to perform greater productivity
with ease as well as reduced fatigue.

Operation is easy with ergonomically designed controls and switches. Low-reflective color 8” monitor, 42% larger display compared to ZX-5G series. New designed pilot shut-off lever AERIAL ANGLE
Easier to view and navigate. Optional USB power supply and Bluetooth®︎ The newly designed pilot shut-off lever allows easier locking and 270-degree bird’s eye-view camera system is available.
available. unlocking with wrist operation.
6 7

230907_ZX350-7G_EN 270624.indd 6-7 27/6/24 6:02 PM

 HIGH DURABILITY

ZX350-7G
Heavy-Duty model ZAXIS 350H / 350LCH

AND RELIABILITY
The heavy-duty model is more durable with reinforced load-bearing points on the excavator

Thickened steel plate

Completing a project on time and on budget depends on the ability of your construction equipment to perform 6 900 kg
Counterweight
all day, every day. That’s why the owners have profited from generations of reliable and durable machinery. Damage prevention plates
and square bars
Hitachi Construction Machinery develops its machines with constant awareness of the need to further improve
long-term reliability. High long-term reliability is good in not only performance all day, every day but also for Reinforced link B
resale value.

Rock bucket 2.30 m³

Thickened steel plates,
additional lateral-type
wear plates.

An engine with improved reliability

The engine is a highly reliable model that has already been
adopted previously.In adopting it for the ZX-7G, we have put Reinforced side step
in our efforts to further increase durability and to boost your Reinforced idler bracket (bolted)
uptime. EGR (Exhaust Gar Recirculation) is removed from the Reinforced lower flange Full track guards
engine, increasing its durability for using low-quality fuel. Triple grouser shoe 600 mm

High reliable fuel circuit

Larger fuel pump and changing filter
locaton improve the reliability of
the entire fuel circuit and further
help to prevent engine problems.
Contributing to boost your uptime.

Reinforced plat form plate

Increased plate strength and
deformation-resistant structure

Reinforced motor cover

Enlarged track guard

Reducing wear and damage risks
on the track link and lower roller. Equipped with an expansion tank
Improving the reliability of the engine
cooling performance

Structurally improved upper roller, lower roller, and the front idler
Maintains lubrication performance in the roller and improves roller durability
8 9

230907_ZX350-7G_EN 270624.indd 8-9 27/6/24 6:02 PM

 SMOOTH

ZX350-7G
MAINTENANCE
Regular maintenance is essential for the machine to achieve high performance.
ZAXIS excavators are designed for ease of regular maintenance. Simple and easy maintenance keeps the
machine in good condition and keeps its high performance.

Easy to clean radiator/Oil cooler/Inter cooler core

Dust-proof indoor net

Provided at the front of radiator
Easy to be removed and cleaned

Cleaning port for radiator/

Oil cooler/Inter cooler core
The cover can be opened
without the need for any tools
Easy to clean radiator/Oil cooler
/Inter cooler core
with simple air blowing

Easy-access air conditioner condenser

The condensor can be opend
Easy to clean radiator/Oil cooler
/Inter cooler core
with simple air blowing Handrail
Handrails have been installed on the platform to allow safer access to the engine and maintenance work around the engine

Standard Standard

Standard

Remote lubrication of arm-end pin Easy access to filters

Reducing the risk of mud stuck in the Filter locations are concentrated
lubrication port
Performs smooth lubrication
in the pump room 4
1 Fuel main filter
2
2 1 1
Fuel pre-filter with
water separator
3 Engine oil filter
4 Pilot filter
3

10 11

230907_ZX350-7G_EN 270624.indd 10-11 27/6/24 6:02 PM

 ZX350-7G
SPECIFICATIONS
ENGINE UNDERCARRIAGE DIMENSIONS
Model Isuzu 6HK1 Tracks
Unit : mm
4-cycle water-cooled, Heat-treated connecting pins with dirt seals. Hydraulic (grease) track 3 190 11 380
Type
common rail direct injection adjusters with shock-absorbing recoil springs.
Aspiration Turbocharged, intercooled Numbers of Rollers and Shoes on Each Side 2 990 R3 600
No. of cylinders 6 Upper rollers 2
Rated power 7 : ZX350H-7G
Lower rollers
ISO 14396 : 2002 gross 200 kW (268HP) at 1 900 min-1 (rpm) 8 : ZX350LCH-7G

3 580
ISO 9249 : 2007 net 190 kW (254HP) at 1 900 min-1 (rpm) 45 : ZX350H-7G

3 150
Track shoes
Maximum torque 1 069 Nm (109 kgfm) at 1 500 min-1 (rpm) 48 : ZX350LCH-7G

1 160
Piston displacement 7.790 L Track guards 3 : ZX350H-7G / ZX350LCH-7G

1 070
Bore and stroke 115 mm x 125 mm Travel Device 500*
Batteries 2 x 12 V Each track driven by 2-speed axial piston motor. 600
Parking brake is spring-set/hydraulic-released disc type. 2 590 3 370 / 4 050**
Automatic transmission system: High-Low.
3 190 4 640 / 4 970**
HYDRAULIC SYSTEM High : 0 to 5.0 km/h
Travel speeds
Hydraulic Pumps Low : 0 to 3.2 km/h
* Excluding track shoe lug **LCH
Main pumps 2 variable displacement axial piston pumps Maximum traction
298 kN (30 400 kgf)
force
Maximum oil flow 2 x 288 L/min
Gradeability 70% (35 degree) continuous
Pilot pump 1 gear pump WORKING RANGES
Maximum oil flow 30.2 L/min
Unit : mm
Hydraulic Motors SERVICE REFILL CAPACITIES
Travel 2 variable displacement axial piston motors Fuel tank 630.0 L
Swing 1 axial piston motor Engine coolant 41.0 L
Relief Valve Settings Engine oil 41.0 L
Implement circuit 34.3 MPa (350 kgf/cm²) Swing device 15.7 L
Swing circuit 32.4 MPa (330 kgf/cm²) Travel device (each side) 11.0 L
Travel circuit 34.3 MPa (350 kgf/cm²) Hydraulic system 340.0 L
Pilot circuit 3.9 MPa (40 kgf/cm²) Hydraulic oil tank 180.0 L
Power boost 38.0 MPa (338 kgf/cm²)
Hydraulic Cylinders
Quantity Bore Rod diameter WEIGHTS AND GROUND PRESSURE
Boom 2 145 mm 100 mm ZX350H-7G / ZX350LCH-7G
Arm 1 170 mm 115 mm Equipped with 6.4 m H-boom, 2.33 m Arm and 2.00 m3 Bucket
(ISO 7451 : 2007 heaped)
Bucket 1 140 mm 95 mm
Shoe width Weight kPa
Shoe type
(mm) (kg) (kgf/cm2)

UPPERSTRUCTURE ZX350H-7G Triple grouser 600 33 700 68 (0.69)

Revolving Frame ZX350LCH-7G Triple grouser 600 34 400 64 (0.65)

D-section frame for resistance to deformation. ZX350H-7G Triple grouser 800 34 700 52 (0.54)

Swing Device ZX350LCH-7G Triple grouser 800 35 400 50 (0.51)

Axial piston motor with planetary reduction gear is bathed in oil. Swing
circle is single-row. Swing parking brake is spring-set/
hydraulicreleased disc type. BUCKET AND ARM DIGGING FORCE
Swing speed 10.7 min-1 (rpm)
Swing torque 120 kNm (12 200 kgfm) 2.33 m
Arm length kN kgf
Bucket digging force* ISO 6015 : 2006 246 25 100
Arm crowd force* ISO 6015 : 2006 250 25 500
* At power boost

Excluding track shoe lug

12 13

230907_ZX350-7G_EN 270624.indd 12-13 27/6/24 6:02 PM

 ZX350-7G
SPECIFICATIONS MACHINE CAPACITIES
Notes: 1. Ratings are based on ISO 10567 : 2007.
BASIC MACHINE WEIGHT AND COMPONENTS WEIGHT 2. Machine capacity does not exceed 75% of tipping load with the machine on firm, A: Load radius
level ground or 87% full hydraulic capacity. B: Load point height
Basic Machine Weight and Overall Width 3. The load point is the center-line of the bucket pivot mounting pin on the arm.
4. *Indicates load limited by hydraulic capacity. C: Machine capacity
Excluding front end attachment, fuel, hydraulic oil and coolant etc. Including counterweight.
5. 0 m = Ground.

For machine capacities, subtract installed attachment and quick hitch weight from machine capacities.
ZX350H-7G ZX350LCH-7G To determine lifting capacities, apply “Rating over-side or 360 degrees” machine capacities from the table and deduct weight of installed attachment and
quick hitch.
Shoe width (mm) Weight (kg) Overall width (mm) Weight (kg) Overall width (mm) Optional feature may affect machine performance.
600 25 400 3 190 26 000 3 190
800 26 300 3 390 27 000 3 390 ZX350H-7G Rating over-front Rating over-side or 360 degrees Unit : kg

Load Load radius

At max. reach
point 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
Conditions
Components Weight Unit: kg height
m meter
ZX350H-7G ZX350LCH-7G
Boom 6.0 *10 850 9 790 9 540 6 830 9 110 6 520 7.70
Counterweight 6 900 6 900 6.40 m H
Arm 4.5 *15 800 14 270 *12 150 9 320 9 350 6 660 7 940 5 660 8.30
Monoblock boom (with arm cylinder and boom cylinder) 4 000 4 000 2.33 m H 3.0 12 700 8 790 9 090 6 410 7 380 5 230 8.60
Arm 2.33 m (with bucket cylinder) 1 240 1 240 Counter Weight
6 900 kg 1.5 12 240 8 380 8 850 6 190 7 240 5 100 8.62
Bucket ISO 7451 : 2007 2.00 m3 1 700 1 700
0 (Ground) 12 010 8 170 8 700 6 060 7 470 5 240 8.38
Bucket ISO 7451 : 2007 2.30 m3 1 800 1 800
-1.5 *18 870 12 390 11 980 8 140 8 700 6 060 8 210 5 740 7.84

-3.0 *20 430 *20 430 *16 520 12 620 12 150 8 300 9 910 6 890 6.93

BACKHOE ATTACHMENTS -4.5 *12 080 *12 080 *9 600 *9 600 5.47

-6.0

ZX350H-7G
Capacity (m3) Width (mm) Recommendation ZX350LCH-7G Rating over-front Rating over-side or 360 degrees Unit : kg
Bucket No. of teeth Weight (kg) Load radius
ISO7451: Without side Arm Load
With side cutters At max. reach
2007 heaped cutters 2.33 m H point 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m
Conditions
height
2.00 1 630 1 660 5 1 700 ○
m meter
Rock bucket
2.30 1 630 1 660 5 1 800 ○
Boom 6.0 *10 850 9 940 *10 070 6 940 *10 060 6 630 7.70
6.40 m H
Arm 4.5 *15 800 14 490 *12 150 9 470 *10 470 6 770 8 930 5 760 8.30

ZX350LCH-7G 2.33 m H 3.0 *13 650 8 940 10 260 6 530 8 310 5 320 8.60
Counter Weight
Capacity (m3) Width (mm) Recommendation 6 900 kg 1.5 13 980 8 530 10 010 6 300 8 160 5 190 8.62

Bucket No. of teeth Weight (kg) 0 (Ground) 13 740 8 320 9 860 6 170 8 440 5 340 8.38
ISO7451: Without side Arm
With side cutters
2007 heaped cutters 2.33 m H -1.5 *18 870 12 610 13 710 8 290 9 860 6 170 9 290 5 850 7.84

2.00 1 630 1 660 5 1 700 ○ -3.0 *20 430 *20 430 *16 520 12 850 *12 830 8 450 *10 530 7 020 6.93
Rock bucket
2.30 1 630 1 660 5 1 800 ○ -4.5 *12 080 *12 080 *9 600 *9 600 5.47
○ Suitable for materials with density of 1 600 kg/m3 or less -6.0

14 15

230907_ZX350-7G_EN 270624.indd 14-15 27/6/24 6:02 PM

 ZX350-7G
EQUIPMENT
: Standard equipment : Optional equipment – : Not applicable : Standard equipment : Optional equipment – : Not applicable

ZX350H-7G / ZX350H-7G / ZX350H-7G /

ENGINE ZX350LCH-7G CAB ZX350LCH-7G MONITOR SYSTEM ZX350LCH-7G UNDERCARRIAGE
ZX350H-7G /
ZX350LCH-7G

Air cleaner double filters All-weather sound suppressed steel cab Alarms: overheat, engine warning, engine oil pressure, Bolt-on sprocket
alternator, minimum fuel level, hydraulic filter restriction, air
Alternator 50 A Auto control air conditioner filter restriction, work mode, overload, etc Full track guard
Auto idle system Bluetooth® integrated radio Alarm buzzers: overheat, engine oil pressure, overload, Greasing type track adjuster
trouble, etc
Auto shut-down control Console height adjustment Reinforced track links with pin seals
Display of meters: water temperature, hour, fuel rate, clock,
Cartridge-type engine oil filter CRES Vll (center pillar reinforced structure) cab etc Shoe: 600 mm triple grouser
Other displays: work mode, auto-idle, glow, rear view Shoe: 600 mm triple grouser reinforced
Cartridge-type fuel main filter Drink holder with hot and cool function
monitor, operating conditions, etc
Shoe: 700 mm triple grouser
Cartridge-type fuel pre-filter with water separator Electric double horn 35 languages selection
Shoe: 800 mm triple grouser
Cold fuel resistence valve Engine shut-off switch
Towing hook
ConSite OIL (sensor)* Equipped with reinforced, tinted (green color) glass windows
ZX350H-7G / Track undercover
Dry-type air filter with evacuator valve (with air filter restriction Evacuation hammer LIGHTS ZX350LCH-7G
indicator) Travel direction mark on track frame
Floor mat Additional boom LED light with cover
Dust-proof indoor net Travel motor covers
Footrest Additional cab roof front LED lights
ECO/PWR mode control Travel parking brake
Front guard : mesh (lower) Additional cab roof rear LED lights
Electrical fuel feed pump Upper and lower rollers
Front guard : mesh (lower & upper) LED lights for camera (side and rear-view camera) 3 track guards (each side)
Engine oil drain coupler
Front guard : mesh (lower), vertical bar (upper) 2 working LED lights 4 tie down hooks
Expansion tank
Front guard : vertical bar (lower & upper)
Fan guard
Front window washer (1 point)
Fuel cooler ZX350H-7G /
UPPER STRUCTURE ZX350H-7G /
Isolation-mounted engine
Glove compartment ZX350LCH-7G
FRONT ATTACHMENTS ZX350LCH-7G

Hands-free calling device AERIAL ANGLE (270-degree view camera system)

Maintenance free pre-cleaner Arm tip remote lubrication
Hot and cool box Batteries
Arm 2.33 m
Radiator, oil cooler and intercooler
Intermittent windshield wipers Counterweight 6 900 kg Arm 2.33 m (Lower Reinforced)
Key cylinder light Electric fuel refilling pump with auto stop Boom 6.40 m H
ZX350H-7G / Electric fuel refilling pump with auto stop and filter
HYDRAULIC SYSTEM ZX350LCH-7G
LED room light Bucket 2.00 m3 rock (ISO 7451 : 2007 heaped) Tiger Tooth

Magazine rack Fuel level float Bucket 2.00 m3 rock (ISO 7451 : 2007 heaped) Standard
Auto power lift Tooth
Pilot shut-off lever Hydraulic oil level gauge
ConSite OIL (sensor)* Bucket 2.30 m3 rock (ISO 7451 : 2007 heaped) Tiger Tooth
Power outlet 12 V Lockable fuel refilling cap
Control valve with main relief valve Bucket 2.30 m3 rock (ISO 7451 : 2007 heaped) Standard
Lockable machine covers Tooth
High mesh full flow filter Power outlet 24 V
Lockable tool box Casted bucket link A
High mesh full flow filter with restriction indicator Rain guard (without OPG front guard)
Centralized lubrication system
Rear tray Platform handrail
One extra port for control valve Dirt seal on all bucket pins
Retractable seat belt Platform handrail (additional)
Pilot filter Flanged pin
ROPS (ISO12117-2:2008) compliant cab − Rear view camera
Power boost HN bushing
ROPS (ISO12117-2:2008) non compliant cab Skid-resistant plates
Suction filter Reinfoced link B
Rubber radio antenna Swing parking brake
Work mode selector Reinforced resin thrust plate
Seat : non suspension (fabric) Undercover
WC (tungsten-carbide) thermal spraying
Seat : mechanical suspension seat Undercover 6.0 mm reinforced
Welded bucket link A
Seat adjustment part : backrest, armrest, height and angle, slide Utility space
forward / back
2 way disconnect switch
Seat belt reminder ZX350H-7G /
ATTACHMENTS ZX350LCH-7G
Short wrist control levers
Attachment basic piping
Smartphone holder
Breaker and crusher piping −
USB power supply
High mesh full flow fillter with restriction indicator
Windows on front, upper, lower and left side can be opened
Line filter
2 speakers
Parts for breaker and crusher −
4 fluid-filled elastic mounts
2 pump combined flow for attachment basic piping
8 inch monitor

ZX350H-7G /
MISCELLANEOUS ZX350LCH-7G

ConSite
Global e-Service
Onboard information controller
Standard and optional equipment may vary by country, so please consult
Standard tool kit
authorized dealer for details.
* Engine oil and hydraulic oil monitoring
16 17

230907_ZX350-7G_EN 270624.indd 16-17 27/6/24 6:02 PM

 ZX350-7G
MEMO MEMO

18 19

230907_ZX350-7G_EN 270624.indd 18-19 27/6/24 6:02 PM

 Before using a machine with a satellite or tele-communication system, please make These specifications are subject to change without notice.
sure that the satellite or tele-communication system complies with local regulations, Illustrations and photos show the standard models, and may or may not include optional equipment,
safety standards and legal requirements. If not so, please make modifications accessories, and all standard equipment with some differences in color and features.
accordingly. Before using, please read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

KS- 24.04 (Q/SN,HMT2)
www.hitachicm.com

230907_ZX350-7G_EN 270624.indd 20 27/6/24 6:02 PM