Microsoft Windows [Version 10.0.22621.

3737]
(c) Microsoft Corporation. All rights reserved.

C:\Users\shaur>py -m esptool
esptool.py v4.7.0
usage: esptool [-h]
[--chip
{auto,esp8266,esp32,esp32s2,esp32s3beta2,esp32s3,esp32c3,esp32c6beta,esp32h2beta1,e
sp32h2beta2,esp32c2,esp32c6,esp32h2,esp32p4}]
[--port PORT] [--baud BAUD] [--before
{default_reset,usb_reset,no_reset,no_reset_no_sync}]
[--after {hard_reset,soft_reset,no_reset,no_reset_stub}] [--no-stub]
[--trace]
[--override-vddsdio [{1.8V,1.9V,OFF}]] [--connect-attempts
CONNECT_ATTEMPTS]

{load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2ima
ge,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify
_flash,erase_flash,erase_region,merge_bin,get_security_info,version}
...

esptool.py v4.7.0 - Espressif chips ROM Bootloader Utility

positional arguments:

{load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2ima
ge,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify
_flash,erase_flash,erase_region,merge_bin,get_security_info,version}
Run esptool.py {command} -h for additional help
load_ram Download an image to RAM and execute
dump_mem Dump arbitrary memory to disk
read_mem Read arbitrary memory location
write_mem Read-modify-write to arbitrary memory location
write_flash Write a binary blob to flash
run Run application code in flash
image_info Dump headers from a binary file (bootloader or application)
make_image Create an application image from binary files
elf2image Create an application image from ELF file
read_mac Read MAC address from OTP ROM
chip_id Read Chip ID from OTP ROM
flash_id Read SPI flash manufacturer and device ID
read_flash_status Read SPI flash status register
write_flash_status Write SPI flash status register
read_flash Read SPI flash content
verify_flash Verify a binary blob against flash
erase_flash Perform Chip Erase on SPI flash
erase_region Erase a region of the flash
merge_bin Merge multiple raw binary files into a single file for
later flashing
get_security_info Get some security-related data
version Print esptool version

options:
-h, --help show this help message and exit
--chip
{auto,esp8266,esp32,esp32s2,esp32s3beta2,esp32s3,esp32c3,esp32c6beta,esp32h2beta1,e
sp32h2beta2,esp32c2,esp32c6,esp32h2,esp32p4}, -c
{auto,esp8266,esp32,esp32s2,esp32s3beta2,esp32s3,esp32c3,esp32c6beta,esp32h2beta1,e
sp32h2beta2,esp32c2,esp32c6,esp32h2,esp32p4}
 Target chip type
--port PORT, -p PORT Serial port device
--baud BAUD, -b BAUD Serial port baud rate used when flashing/reading
--before {default_reset,usb_reset,no_reset,no_reset_no_sync}
What to do before connecting to the chip
--after {hard_reset,soft_reset,no_reset,no_reset_stub}, -a
{hard_reset,soft_reset,no_reset,no_reset_stub}
What to do after esptool.py is finished
--no-stub Disable launching the flasher stub, only talk to ROM
bootloader. Some features will not be
available.
--trace, -t Enable trace-level output of esptool.py interactions.
--override-vddsdio [{1.8V,1.9V,OFF}]
Override ESP32 VDDSDIO internal voltage regulator (use with
care)
--connect-attempts CONNECT_ATTEMPTS
Number of attempts to connect, negative or 0 for infinite.
Default: 7.

C:\Users\shaur>esptool
'esptool' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\shaur>

C:\Users\shaur>py -m esptool --chip esp32 --port COM11 erase_flash

esptool.py v4.7.0
Serial port COM11
Connecting......................................

A fatal error occurred: Failed to connect to ESP32: Invalid head of packet (0x08):
Possible serial noise or corruption.
For troubleshooting steps visit:
https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html

C:\Users\shaur>py -m esptool --chip esp32 --port COM11 erase_flash

esptool.py v4.7.0
Serial port COM11
Connecting......................................

A fatal error occurred: Failed to connect to ESP32: Invalid head of packet (0x08):
Possible serial noise or corruption.
For troubleshooting steps visit:
https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html

C:\Users\shaur>py -m esptool --chip esp32 --port COM11 erase_flash

esptool.py v4.7.0
Serial port COM11
Connecting...................
Chip is ESP32-D0WD-V3 (revision v3.1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme
None
Crystal is 40MHz
MAC: 24:dc:c3:a1:4c:48
Uploading stub...
Running stub...
Stub running...
Erasing flash (this may take a while)...
Chip erase completed successfully in 1.9s
Hard resetting via RTS pin...

C:\Users\shaur>cd Downloads

C:\Users\shaur\Downloads>cd micropython-camera-driver-master

C:\Users\shaur\Downloads\micropython-camera-driver-master>cd micropython-camera-
driver-master

C:\Users\shaur\Downloads\micropython-camera-driver-master\micropython-camera-
driver-master>cd firmware

C:\Users\shaur\Downloads\micropython-camera-driver-master\micropython-camera-
driver-master\firmware>py -m esptool --chip esp32 --port COM11 --baud 460800
write_flash -z 0x1000 micropython_cmake_9fef1c0bd_esp32_idf4.x_ble_camera.bin
esptool.py v4.7.0
Serial port COM11
Connecting...
Chip is ESP32-D0WD-V3 (revision v3.1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme
None
Crystal is 40MHz
MAC: 24:dc:c3:a1:4c:48
Stub is already running. No upload is necessary.
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00001000 to 0x00181fff...
Compressed 1575808 bytes to 1010481...
Wrote 1575808 bytes (1010481 compressed) at 0x00001000 in 24.6 seconds (effective
511.5 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...

C:\Users\shaur\Downloads\micropython-camera-driver-master\micropython-camera-
driver-master\firmware>py -m esptool --chip
esp32 --port COM11 --baud 460800 write_flash -z 0x1000
micropython_cmake_9fef1c0bd_esp32_idf4.x_ble_camera.bin
esptool.py v4.7.0
Serial port COM11
Connecting....
Chip is ESP32-D0WD (revision v1.0)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme
None
Crystal is 40MHz
MAC: 0c:b8:15:5b:10:d4
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Flash will be erased from 0x00001000 to 0x00181fff...
Compressed 1575808 bytes to 1010481...
Wrote 1575808 bytes (1010481 compressed) at 0x00001000 in 24.6 seconds (effective
511.4 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...

C:\Users\shaur\Downloads\micropython-camera-driver-master\micropython-camera-
driver-master\firmware> esp32 --port COM11--baud 460800 write_flash -z 0x1000
micropython_cmake_9fef1c0bd_esp32_idf4.x_ble_camera.bin esp32 --port COM11 --baud
460800 write_flash -z 0x1000
micropython_cmake_9fef1c0bd_esp32_idf4.x_ble_camera.bin