Flow control, 3-way pressure compensated,
combination type fixed setting
Common cavity, Size 10 RE 18321-18
Edition: 03.2016
VRFC-10A-TF 04.04.01.00.85 - Z Replaces: 09.2009
Technical data
Pressure min. - max. 14 - 350 bar (200 - 5000 psi)
Max. inlet flow 60 l/min. (16 gpm)
Flow range see “Regulated flow range” table
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 41 - 47 Nm (30 - 35 ft-lbs)
Weight 0.14 kg (0.31 lbs)
Cavity CA-10A-3N (see data sheet 18325-70)
Lines bodies and standard Please refer to section “Hydraulic
assemblies integrated circuit” or consult factory
Seal kit1) Code: RG10A3010520100
Description material no: R901111369
A constant flow rate, regardless of system pressures, is Fluids Mineral-based or synthetics with
established from 1 to 3 while a minimum pressure lubricating properties
at viscosities of 10 to 500 mm2/s (cSt)
differential of 14 bar (200 psi) exists between the two
Recommended degree of Nominal value max. 10µm (NAS 8) /
ports. Input flow supplied to 1 in excess of the regulated
fluid contamination ISO 4406 19/17/14
output at 3 is by-passed to 2. The valve cannot be adjusted
Installation No restrictions
for variable flow output. Flow from 3 to 1 is limited by the
Other Technical Data See data sheet 18350-50
diameter of the selected control orifice and is not pressure
1) Only external seals for 10 valves
compensated. Flow from 2 to 1 is not permitted.
Characteristic curve
REGULATED FLOW
PRESSURE
RE 18321-18/03.2016, Bosch Rexroth Oil Control S.p.A.
Dimensions [mm (inches)]
2 VRFC-10A-TF | Flow control, 3-way pressure compensated
Ordering code
04.04.01.00 85 Z 00 *
Series 0/A to L
unchanged performances and dimensions
Flow control, 3-way pressure compensated
combination type fixed setting Version and options standard
Regulated flow range
l/min. (gpm) ± 10%
02 1.7 (0.5)
04 3.5 (0.9)
05 5 (1.3)
07 7.2 (1.9)
09 8.7 (2.3)
85 Common cavity, Size 10 17 17 (4.5)
19 19 (5)
Preferred types
Type Material number Type Material number
040401008502000 R930005627 040401008509000 R930005631
040401008504000 R930005628 040401008517000 R930005632
040401008505000 R930005629 040401008519000 R930005633
040401008507000 R930005630
Dimensions
Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
[email protected] obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.
Bosch Rexroth Oil Control S.p.A., RE 18321-18/03.2016
