WARE HOUSE (PEB)
FOUNDATION DESIGN
CALCULATION
RECTANGULAR SPREAD FOOTING ANALYSIS
Job Name: Subject:
Job Number: Originator: Checker:
Input Data: +Pz
Footing Data: +My
+Hx
Footing Length, L = 8.200 ft. Q
Footing Width, B = 8.200 ft.
Footing Thickness, T = 1.640 ft. Lpx D h
Concrete Unit Wt., gc = 0.150 kcf
Soil Depth, D = 3.280 ft.
Soil Unit Wt., gs = 0.097 kcf T
Pass. Press. Coef., Kp = 2.157
Coef. of Base Friction, m = 0.180
Uniform Surcharge, Q = 0.315 ksf
L
Pier/Loading Data:
Number of Piers = 1 Nomenclature
Pier #1
Xp (ft.) = 0.000
Yp (ft.) = 0.000
Lpx (ft.) = 2.290
Lpy (ft.) = 2.290
h (ft.) = 3.280
Pz (k) = -89.958
Hx (k) = -0.001
Hy (k) = 0.693
Mx (ft-k) = 0.000
My (ft-k) = 0.000
FOOTING PLAN
Results: Nomenclature for Biaxial Eccentricity:
Case 1: For 3 Corners in Bearing
Total Resultant Load and Eccentricities: (Dist. x > L and Dist. y > B)
SPz = -149.98 kips Dist. x
ex = 0.00 Pmax
ey = 0.02 ft. (<= B/6) Brg. Ly
Overturning Check:
SMrx = 528.10 ft-kips
SMox = -3.41 ft-kips Line of zero Dist. y
FS(ot)x = 154.887 (>= 1.5) pressure Brg. Lx
SMry = N.A. ft-kips
SMoy = N.A. ft-kips
FS(ot)y = 107336.461 (>= 1.5)
Case 2: For 2 Corners in Bearing
Sliding Check: (Dist. x > L and Dist. y <= B)
Pass(x) = 11.54 kips Dist. x
Frict(x) = 23.18 kips Pmax
FS(slid)x = 34720.893 (>= 1.5) Brg. Ly1
Passive(y) = 11.54 kips
Frict(y) = 23.18 kips Dist. y
FS(slid)y = 50.102 (>= 1.5) Brg. Ly2
Line of zero
Uplift Check: pressure
SPz(down) = -128.80 kips
SPz(uplift) = 0.00 kips
FS(uplift) = N.A.
Case 3: For 2 Corners in Bearing
Bearing Length and % Bearing Area: (Dist. x <= L and Dist. y > B)
Dist. x = N.A. ft. Dist. x
Dist. y = N.A. ft. Brg. Lx2 Pmax
Brg. Lx = 8.200 ft.
Brg. Ly = 8.200 ft.
%Brg. Area = 100.00 %
Biaxial Case = N.A.
Dist. y
Line of zero
Gross Soil Bearing Corner Pressures: pressure Brg. Lx1
P1 = 2.198 ksf
P2 = 2.263 ksf
P3 = 2.263 ksf
P4 = 2.198 ksf Case 4: For 1 Corner in Bearing
(Dist. x <= L and Dist. y <= B)
Dist. x
P3=2.263 ksf P2=2.263 ksf Brg. Lx Pmax
B
P4=2.198 ksf L P1=2.198 ksf Dist. y
CORNER PRESSURES Brg. Ly
Line of zero pressure
Maximum Net Soil Pressure:
Pmax (net) = Pmax (gross)-(D+T)*gs
Pmax (net) = 1.786 ksf
DESIGN OF PADESTAL
1. INPUT DATA
c1 Pedestal width 60 cm
c2 Pedestal depth 60 cm
Lc Pedestal height 250 cm
b1 Base plate width 50 cm
b2 Base plate depth 40 cm
fc' Concrete compressive strength 28 Mpa
3
Sm elastic section modulus 252671 cm
β long side/short side 1
2.Flexure check:
Design of cross section subject to flexure shall be based on
ΦMn ≥ Mu ACI (22-1)
Mu maximum moment applied on pedestal = KN-m
Tension control compression control ?
For tension controls,
Mn = 0.42*√fc' *Sm ACI (22-2) 561.5 KN-m
ΦMn ≥ Mu Yes
for compression controls,
Mn = 0.85*fc'*Sm ACI (22-3) 6013.5698 KN-m
ΦMn ≥ Mu Yes
Compression Check:
Design of cross section subject to compression shall be based on
ΦPn ≥ Pu ACI (22-4)
Pu maximum compressive load applied on pedestal
cross section = 400 KN
Pn = 0.60*fc'(1-(Lc/32h)^2)*A1 ACI (22-5) 3303.0339 KN
A1 is the loaded area,
Members subject to combined flexure and axial load in compression
shall be proportioned such that on the compression face,
Pu/ΦPn + Mu/ΦMn ≤ 1 ACI (22-6)
Pu/ΦPn + Mu/ΦMn 0.1211008
Pu/ΦPn + Mu/ΦMn ≤ 1
Yes
and on the tension face,
Mu/Sm - Pu/Ag ≤0.42*Φ√fc' ACI (22-7)
Mu/Sm - Pu/Ag 1111.1111
0.42*Φ√fc' 3234 KN
Mu/Sm - Pu/Ag ≤0.42*Φ√fc' Yes
Check for shear:
Check for shear:
Design of rectangular cross sections subject to shear
shall be based on ΦVn ≥ Vu ACI(22-8)
Vu maximum shear force applied on pedestal = 4.00 KN
Check for one way shear,
Vn = 0.11√fc'*bw*h ACI (22-9) 554.4 KN
ΦVn ≥ Vu Yes
Check for two-way shear:
Vn = 0.11*(1+2/β)*√fc'*b*h ACI (22-10) 1663.2
but not greater than,
0.22*√fc'*b*h 1108.8
Yes
ΦVn ≥ Vu Yes
Design of bearing areas subject to compression shall be
based on ΦBn ≥ Bu ACI(22-11)
Bu is factored bearing load = 4.00 KN
Bn = 0.85*fc'*A1 ACI (22-12) 4760
ΦBn ≥ Bu Yes
Plain concrete members subject to combined flexure and
axial compressive load are proportioned such that on compression face:
(Pu/0.60*Φ*fc'(1-(Lc/32h)2)*A1)+ (Mu/0.85*Φ*fc'*Sm) ≤ 1
(Pu/0.60*Φ*fc'(1-(Lc/32h)2)*A1)+ (Mu/0.85*Φ*fc'*Sm) 0.2165912
(Pu/0.60*Φ*fc'(1-(Lc/32h)2)*A1)+ (Mu/0.85*Φ*fc'*Sm) ≤ 1 Yes
Reinforcement:
Mu = Ultimate Moment (COMB2) = 1.000 ton-m
fy = Specified yield strength of reinforcement = 4200 kg/cm2
f'c = Specified compressive strength of concrete = 280 kg/cm2
d = Effective Depth = 20.9 cm
b = Design Width = 100 cm
Ø = Strength reduction factor = 0.9
As = f'c * b [d - √(d2 - 2.35 Mu/(Ø * f'c * b))]/(1.176 * fy)= 1.2715 cm2
ρ = Percentage of reinforcement = As/(b * d) 0.0006
ρ max c/fy [6300/(6300 + fy)] = 0.0217
ρ < ρ max Yes
ρ min = 0.0020
Asmin = ρ min * b * d = 4.18 cm2
As > Asmin No
Use As = 4.18 cm2
Use N16 Bars, as 2.00 cm2
N16 @ 200mm c/c Each Way,Each Face of footing
