ANNEX – C (PART-I)

List of Medical Equipment - BHU to District Health level - KPK Pakistan

Expected Delivery Date: 15-October-2020
Delivery Location: As per quantities and locations mentioned in Annex-XX

S.# Equipment name Specification Quantity

• Couch top made of 3 sections i.e. back, hip, and leg sections covered with mattress having raxine cover.
• Leg section removable
• Up/down movement through hydraulic system.
• Back seat adjustment through handles.
1 Delivery Table 16
• Removable receptacle under the hip area.
• Lithotomy poles with tying strips.
• Hand grips on both the sides.
• Mobile on castors.

• Frame to be one piece welded mild steel powder coated.

• Headrest to have step less angle adjustment from horizontal to 75°
2 Examination Coach • 2’’ Mattress of 2.5 lbs./cft density with waterproof sterilize able cover. 18
• Paper roll holder to be fitted at head end and suitable for paper rolls up to 510mm wide.
• Size Approx. 2000mm x 500mm with standard height.
 ANNEX – C (PART-I)
• Overall dimension (LxWxH) 195cmx 85cmx 55cm (±10)
• The Bed must facilitate a metal constructed, mattress surface covered with 4-section abs Materials,
ABS covered sub-frame.
• Adjustable back rest and leg section by means of two independent cranks with square threads pitch
revolving in steel nuts by means of rectangular handle.
• The bed is mounted on double ball bearing, swivel castors of non- tin and weather proof rubber. Two
fixed at head end and two swiveling with independent breaks at foot end.
• Rubber bumpers at all four corners
• Four Mattress holders (2 at each side)
• With I V pole.
• Structure of the platform shall be smooth and seamless.
• Platform shall not contain cavities in order to avoid hideouts/safe areas for germs.
• All the corners of the platform shall be round and smooth.
• All the joints shall be made smooth
Bed side Locker:
3 Patient beds 34
• Overall size of locker 40cm width, 40cm depth, 80 cm height.
• Made up of SS 18 SWG.
• Top made of CP galvanized steel sheet,
• One drawer. One cabinet with space between the drawer and cabinet.
• Base made of 1” round/square pipe.
• FINISH: Polyester powder coated finishing
Over Bed Table:
• Top made of Stainless steel.
• Height adjustable approx. 750mm to 1100 mm
• Height may be raised or lowered by lifting release bar under the tabletop by hydraulic mechanism or
spring.
• Mobile on four castors.
Side Railing:
• Adjustable length allows for use at bed rail to prevent falling out of bed.
• Collapsible in 2 steps, Height of Rail 18” (high from the point of fixing on the structure of bed)
• Stainless Steel frame made of hollow pipe diameter 1" Shaped for two steps.
4 Footstep • Front and rear legs provided with steel bars. 34
• Wooden step duly covered with rubber mat and sides dressed with aluminum/strip.
 ANNEX – C (PART-I)
• Powder coated mild steel 18 SWG tubular frames.
• Lying area made of rectangular hollow pipe frame with wire mesh.
• Mobile on 50 mm dia. Rubber castors.
5 Baby Cot 16
• Safety sides can be adjustable up & down easily.
• Standard cushioned Rexene foam mattress with 2-inch thickness.
• Laying area 55 cm x 100cm.

• Performance: suction controlled 0-650mmHg (Adjustable) • Capacity : 30l/min or more

• Controls: On/Off switch
• Safety: positive pressure restricted with filter.
• Complete with autoclave able receiver jar 2x2000 ml or more(Autoclavable)
6 Suction Machine (Baby) 14
• Suction tip: 1 No
• Suction pipe length2m, with hose.
• Mobile on four antistatic castors
With the overflow safety
 ANNEX – C (PART-I)

• Minimum 8 or more sterilization cycles (Vaccumization, Heating, Sterilization, Exhaust and Drying), For (a)
wrapped as well as unwrapped instruments, (b) flash sterilization, open, packed.
• 5 inch or more display.
• Single door, high pressure, high vacuum autoclave for sterilizing hospital, materials.
• The closing, locking and opening of the door should be automatic having motorized button-controlled door,
without any lever.
• With Printer
• Electrically operated with inbuilt electric steam generator
• System should be operated with a high vacuum pump.
• Chamber should be made of stainless steel or better material
• Water level indicator
• Internal Chamber Capacity: 200 liters or more
7 Autoclave Large 14
• Sterilization Temperature Range: 121°C to 134°C or more
• Maximum Chamber pressure: 2 bars or more
• Chamber Temperature and pressure gauges/display
• Cycles run countdown function
• Autoclave should be properly equipped with door safety locks & safety valves for chamber.
• With integral alarm system when temperature set-points are exceeded or fallen below.
• With Pressure safety valve, over-temperature limiter, over pressure limiter
• Low water protection with audio visual indicator
• Autoclave should execute Vacuum test, Bowie & Dick test or More
• Should be supplied with compatible RO plant of, with imported parts. Accessories:
• Basket 02 Nos
• Trays 10 Nos
 ANNEX – C (PART-I)

Item/ Qty

• Stainless steel imported/Local made

• Bowl lotion 150 mm -1
• Kidney Tray 10”- 3
• Mucus Extractor Reusable Rubber -2
• Catheter used with mucus Extractor- 2
• Artery Forceps Kocher 8” straight- 4
8 Delivery Set 14
• Dissecting Forceps 6” toothed- 4
• Needle holder mayo 6.5- 1
• Outlet Forceps large size- 2
• 1Episiotomy Scissors 6”- 2
• Scissors B/B -6
• Card Clamp- 1
• Sims Speculum -1
• Along with Container

Item/ Qty
• Uterine Sound- 1
• Curette Double Ended- 3
• Volselum10”- 1
• Artery Clamp 10” -8
• Ovum Forceps- 2
• Dialectomy set -1
• Sims speculum forceps set of three -1
9 D & C Set. • Curved for Gynae 1 to 5- 1 14
• Sate catheter (Metallic female catheter 1 Instrument containerbox10”x12”- 1
• towel clipsonpin -4
• sponge holding forceps 9.5”- 1
• non toothed dissecting forceps 8” -2
• Allis’s forceps 9” -2
• Dilator set (Hegers) -1
• Galli Pot150ml- 2
• Along with Container
 ANNEX – C (PART-I)

Item/ Qty
• instrument container box10”x12”- 1
• Towel clips on pin -4
• Sponge holding forceps -1
• non toothed dissecting forceps7” -6
• Allis’s forceps9” -2
• Dilator set -4
• Sims speculum set- 4
• Duck speculum set -4
10 E & C Set. 14
• Uterine Sound
• Volselum set- 4
• Uterine curette set of three- 2
• Kidney tray 1 liter- 1
• Page 0179 of 207
• Kidney tray 500ml -1
• Flushing curette set of three- 1
• Gallipots 150 ml- 1
• Along with Container

• Heavy Weight base mobile on 50 mm dia castors

11 Drip Stand • Powder coated base and column with telescope adjustment. 92
• 4 ports I/V rod of wire diameter0.5 mm.

• Constructed from shatter resistant materials fully protected plastic manometer tube with clear reading scale,
range 0 to 300 mm Hg.
Mercury BP set with • Integral mercury reservoir.
12 86
Stand • Spring coil tube with bulb. (Pump).
• Pediatric and adult cloth cuff with Velcro fastening cuff holder.
Unit mounted on stable 4 to 5 castor mild steel base.
 ANNEX – C (PART-I)

• Weighing 160 kg, resolution 500g platform size 28 x 38.5 cm with a series of 70 to 190 cm height.
- Weighing up to 160 kg
- The resolution capacity of 500 grams.
- Cover the platform tire size is 280 x 385 mm.
13 Adult Weight Machine 52
- The unit is weighing two kg and lb.
- The machine and the platform is made of lightweight steel.
- The center button on the rear of the machine.
- A series of 70 to 190 cm height.

• Scales to be highly accurate and stable.

• Touch controls with splash proof keyboard.
14 Pediatric Scale • Removable baby weighing pan. 48
• Automatic hold, slow and tare controls.
• Capacity: 0 kg to 30kg or better.

• Measuring range in cm: 20 - 205 cm

• Graduation [Measuring Rod]: 1 mm, 1 mm
15 Height Rod 48
• Measure (W x H x D): 328 x 2145 x 574
• Net weight: 3,6 kg

• Infantometer use for Measure height of born babies.

• These infantometer are made Acrylic structure.
16 Length Board 30
• Able to measure height in MM, CM and inches.
• 1 mm graduation.

• Frame constructed of stainless-steel hollow pipe

• Complete with two Stainless steel trays having open space between it.
17 Instrument Trolly • Both trays provided with reinforcement as side guards for safety. 64
• Mobile on 50mm dia, twin wheels.
• Size(60x90) cm
 ANNEX – C (PART-I)
• Folding Wheelchair
• Detachable Desk Armrests
• Swinging Detachable Elevating (Adjustable height) leg rests.
18 Wheelchair • Footsteps made of Aluminum. 49
• With Safety belt.
• Seat width 38 x 43cm
• Made of high-quality leather to withstand human load

• Length: 6 ft or more
• Width: 2 ft or more
• Made of stainless steel
19 Stretcher (Wheels) 49
• 4 rubber castors having 23 cm dia
• Castors should Lockable
• Top made of stainless steel. With Drip stand.

• Length: 6 ft or more
• Width: 2 ft or more
• Made of stainless steel
20 Folding Screen • 4 rubber castors having 23 cm dia 96
• Castors should Lockable
• Top made of stainless steel.
• With Drip stand.

• Stool with 16 SWG stainless steel structure and seat of diameter 300mm.
21 Patient Stool • Height adjustable by simple spun mechanism. 96
• Height adjustment not less than 53cm to 68cm.

• Suitable for domestic and commercial use.

• Manufactured from 30% recycled polyethylene to produce a bin that is lightweight yet robust and is resistant
Segregated Waste Bins
22 to ultraviolet, frost and chemical exposure. 38
(Set of 03)
• Easy to clean, hygienic solution to waste disposal.
• Y30:Z30

• Electric Water Cooler 80 Liters capacity

23 Electric Water Cooler • With three stage water filter 19
• with manufacturer warranty