KAOSS PAD KP3 MIDI Implementation Revision 1.1 (2007.09.

10)

1.Transmitted Data ---------------------------------------------------------

1-1 Channel Messages [H]:Hex, [D]:Decimal

+--------+----------+----------+-----------------------------------------------+
| Status | Second | Third | Description (Transmitted by ) |
| [Hex] | [H] [D] | [H] [D] | |
+--------+----------+----------+-----------------------------------------------+
| 8n | kk (kk) | 40 (64) | Note Off (Sample Bank) |
| 8n | dd (dd) | dd (dd) | Note Off (Ext.Ctrl Mode) |
| 9n | kk (kk) | 64 (100) | Note On (Sample Bank) |
| 9n | dd (dd) | dd (dd) | Note On (Ext.Ctrl Mode) |
| Bn | cc (cc) | vv (vv) | Control Change (Panel Control) |
| Cn | dd (dd) | -- -- | Program Change (Panel Control) |
+--------+----------+----------+-----------------------------------------------+
n : MIDI Channel = 0~15
kk : Note# 0~127
dd : Data = 0~127
cc : Control Change# = 0~127
vv : Value = 0~127

1-2 System Realtime Messages

+-----------+-------------------------------------------+
| Status[H] | Description |
+-----------+-------------------------------------------+
| F8 | Timing Clock *1|
| FA | Start *2|
| FB | Continue *2|
| FC | Stop *2|
| FE | Active Sensing |
+-----------+-------------------------------------------+
*1 :This message is transmitted when the "Clock" is set to "Internal".
*2 :Transmitted when in Ext.Ctrl mode.

1-3 Universal System Exclusive Messages ( Non Realtime )

Device Inquiry Reply

+---------+---------------------------------------------+
| Byte[H] | Description |
+---------+---------------------------------------------+
| F0 | Exclusive Status |
| 7E | Non Realtime Message |
| 0g | Global MIDI Channel ( Device ID ) |
| 06 | General Information |
| 02 | Identity Reply |
| 42 | KORG ID ( Manufacturers ID ) |
| 78 | KAOSS PAD KP3 ID ( Family ID (LSB)) |
| 00 | ( Family ID (MSB)) |
| 00 | ( Member ID (LSB)) |
| 00 | ( Member ID (MSB)) |
| xx | ( Minor Ver. (LSB)) |
| xx | ( Minor Ver. (MSB)) |
| xx | ( Major Ver. (LSB)) |
| xx | ( Major Ver. (MSB)) |
| F7 | End Of Exclusive |
+---------+---------------------------------------------+
 This message is transmitted whenever an INQUIRY MESSAGE REQUEST is received.

1-4 KAOSS PAD KP3 System Exclusive Message Transmitted Command List

Structure of KAOSS PAD KP3 System Exclusive Messages

+- -+ -+
| 1st Byte = 1111 0000 :(F0) Exclusive Status | |
| 2nd Byte = 0100 0010 :(42) KORG ID |Ex.Header |
| 3rd Byte = 0011 nnnn :(3g) Format ID g:MIDI Channel | |
| 4th Byte = 0111 1000 :(78) KAOSS PAD KP3 ID | |
| 5th Byte = 0fff ffff :(ff) Function Code -+ |
| 6th Byte = 0ddd dddd :(dd) Data |
| : : : |
| LastByte = 1111 0111 (F7) : End of Exclusive |
+- -+ -+

Function ID Code List

+-------------+-----------------------------------+-----+
| Function ID | Description/Function | |
| [Hex] | | |
+-------------+-----------------------------------+-----+
| 4C | 1 Program Memory Data Dump | R |
| 4E | Sample Header Data Dump | R |
| 4F | Sample Data Dump | R |
| 51 | Global Data Dump | R |
| 21 | Write Completed | E |
| 22 | Write Error | E |
| 27 | Sample Receive Ready | R |
| 28 | Irregular Mode Error (#11-1) | R,E |
| 29 | Irregular Condition Error (#11-1) | R,E |
+-------------+-----------------------------------+-----+
Transmitted when
R : Request Message is received.
E : Exclusive Message is received.

2.Recognized Receive Data --------------------------------------------------

2-1 Universal System Exclusive Message (Non Realtime)

Inquiry Message Request
+---------+---------------------------------------------+
| Byte[H] | Description |
+---------+---------------------------------------------+
| F0 | Exclusive Status |
| 7E | Non Realtime Message |
| gg | Global MIDI Channel |
| 06 | General Information |
| 01 | Identity Request |
| F7 | End Of Exclusive |
+---------+---------------------------------------------+
gg = 00~0F :Received if Global Channel
7F :Received on any Channel

2-2 KAOSS PAD KP3 System Exclusive Message Received Command List

Function ID Code List

+-------------+-----------------------------------------+
| Function ID | Description/Function |
| [Hex] | |
+-------------+-----------------------------------------+
| 0E | Global Data Dump Request |
| 1C | 1 Program Memory Data Dump Request |
| 1E | Sample Data Dump Request |
| 27 | Sample Receive Ready |
| 4C | 1 Program Memory Data Dump |
| 4E | Sample Header Data Dump |
| 4F | Sample Data Dump |
| 51 | Global Data Dump |
+-------------+-----------------------------------------+
When the "SystemEx" parameter is set to "ENA", these messages are recognized.

3.MIDI Exclusive Format (R:Receive, T:Transmit) --------------------------

(1) Global Data Dump Request

R,-
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0000 1110 (0E) | Global Data Dump Request
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message, and transmits Func=51 message.

(2) 1 Program Memory Data Dump Request

R,-
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0001 1100 (1C) | 1 Program Memory Data Dump Request
|
| 0000 0ppp (0p) | Program Memory No.(0~7)
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message, and transmits Func=4C message.

(3) Sample Data Dump Request

R,-
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0001 1110 (1E) | 1 Sample Data Dump Request
|
| 0000 00ss (0s) | ss:Sample Bank No.(0~3)
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message, and transmits Func=4E message.

(4) 1 Program Memory Data Dump

R,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0100 1100 (4C) | 1 Program Memory Data Dump
|
| 0000 0ppp (0p) | Program Memory No.(0~7)
|
| 0ddd dddd (dd) | Data (NOTE 1,4)
|
| : | :
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message & data, save them to Edit Buffer and transmits Func=21 or
Func=22 message.
Receive Func=1C message, and transmits this message & data from Edit Buffer.

(5) Sample Header Data Dump

R,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0100 1110 (4E) | Sample Header Data Dump
|
| 0000 00ss (0s) | ss:Sample Bank No.(0~3)
|
| 0ddd dddd (dd) | Data (NOTE 3,4)
|
| : | :
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message & data, transmits Func=27 message.
Receive Func=1E message, and transmits this message & data from Edit Buffer.

(6) Sample Data Dump

R,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0100 1111 (4F) | Sample Data Dump
|
| 0000 0000 (00) | dummy Data
|
| 0ddd dddd (dd) | Data (NOTE 4)
|
| : | :
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Receive this message & data, transmits Func=21 or Func=22 message.
Receive Func=27 message, and transmits this message & data from Edit Buffer.

(7) Global Data Dump

R,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0101 0001 (51) | Global Data Dump
|
| 0ddd dddd (dd) | Data (NOTE 2,4)
|
| : | :
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
 Receive this message & data, save them to Internal Memory and transmits Func=21 or
Func=22 message.
Receive Func=0E message, and transmits this message & data from Edit Buffer.

(8) Write Completed

-,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0010 0001 (21) | Write Completed
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
When "DATA LOAD" has been completed, transmits this message.

(9) Write Error

-,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0010 0010 (22) | Write Error
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
When "DATA LOAD" has not been completed, transmits this message.

(10) Sample Receive Ready

R,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0010 0111 (27) | Sample Receive Ready
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
 Receive Func=4E message, and transmits this message.

(11) Irregular Mode Error (in USB Mode)

-,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0010 1000 (28) | Irregular Mode Error (#11-1)
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Transmits this message when Func messages have been received in USB mode.

(12) Irregular Condition Error (Sampling)

-,T
+----------------
+------------------------------------------------------------------+
| Byte | Description
|
+----------------
+------------------------------------------------------------------+
| F0,42,3g,78 | KAOSS PAD KP3 Exclusive Header g;Global Channel [Hex]
|
| 0010 1001 (29) | Irregular Condition Error (#11-1)
|
| 1111 0111 (F7) | End of Exclusive (EOX)
|
+----------------
+------------------------------------------------------------------+
Transmits this message when Func messages have been received while Sampling.

NOTE 1: Program Memory Data Dump Format

702Bytes = 7*100+2 -> (7+1)*100+(2+1) => 803Bytes
(TABLE 1)

NOTE 2: Global Data Dump Format

256Bytes = 7*36+4 -> (7+1)*36+(4+1) => 293Bytes
(TABLE 2)

NOTE 3: Sample Header Data Dump Format

16Bytes = 7*2+2 -> (7+1)*2+(2+1) => 19Bytes
(TABLE 3)

NOTE 4: The Dump Data Conversion

Data (1set = 8bit x 7Byte)

b7 ~ b0 b7 ~ b0 b7 ~~ b0 b7 ~ b0
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+
 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+
7n+0 7n+1 7n+2 ~~ 7n+5 7n+6

MIDI Data (1set = 7bit x 8Byte)

b7b7b7b7b7b7b7 b6 ~ b0 b6 ~~ b0 b6 ~ b0
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+
|0| | | | | | | | |0| | | | | | | | |0| | | | | |0| | | | | | | |
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-~~-+-+-+ +-+-+-+-+-+-+-+-+
7n+6,5,4,3,2,1,0 7n+0 7n+1 ~~ 7n+5 7n+6

TABLE 1 : Program Memory Parameter

+-----------+-------------------+-----------------------------------+
| No. (bit)| PARAMETER | VALUE DESCRIPTION |
+-----------+-------------------+-----------------------------------+
| 0 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | Memorized Program#| 0~127 |
+-----------+-------------------+-----------------------------------+
| 1 B1~7 | not use | (0,0,0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0 | Hold SW | 0/1=Off/On |
+-----------+-------------------+-----------------------------------+
| 2,3 | Holded PadX Value | 0~1023 |
+-----------+-------------------+-----------------------------------+
| 4,5 | Holded PadY Value | 0~1023 |
+-----------+-------------------+-----------------------------------+
| 6 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | Fx Depth Value | 0~127 |
+-----------+-------------------+-----------------------------------+
| 7~19 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| Pad Motion Setting |
+-----------+-------------------+-----------------------------------+
| 20 | Motion Condition | 0~ |
+-----------+-------------------+-----------------------------------+
| 21 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| 22~25 | Motion Top Address| |
+-----------+-------------------+-----------------------------------+
| 26~29 | Motion End Address| |
+-----------+-------------------+-----------------------------------+
| 30~701 | Pad Motion Data | |
+-----------+-------------------+-----------------------------------+

TABLE 2 : Global Parameter

+-----------+-------------------+-----------------------------------+
| No. (bit)| PARAMETER | VALUE DESCRIPTION |
+-----------+-------------------+-----------------------------------+
| 0 B3~7 | not use | (0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~2 | Last Prog Memo# | 0~7=Program Memory 1~8 |
+-----------+-------------------+-----------------------------------+
| 1 B4~7 | not use | (0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~3 | Pad LED Setting | 0~10=Off/Chara/Type.1~8/Chain |
+-----------+-------------------+-----------------------------------+
| Pad LED Screen Saver Character |
+-----------+-------------------+-----------------------------------+
| 2 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | 1st Character | ASCII code (20~7F) |
+-----------+-------------------+-----------------------------------+
| 3 | 2nd Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 4 | 3rd Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 5 | 4th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 6 | 5th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 7 | 6th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 8 | 7th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 9 | 8th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 10 | 9th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 11 | 10th Character | (same as 1st Character) |
+-----------+-------------------+-----------------------------------+
| 12 | (reserved) | (0,0,0,0,0,0,0,0) |
+-----------+-------------------+-----------------------------------+
| 13 B1~7 | not use | (0,0,0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0 | Pad ProgName Disp | 0/1=Disable/Enable |
+-----------+-------------------+-----------------------------------+
| 14 B2~7 | not use | (0,0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0,1 | Mesg Scroll Time | 0/1/2=Slow/Middle/Fast |
+-----------+-------------------+-----------------------------------+
| 15 | (reserved) |
+-----------+-------------------+-----------------------------------+
| MIDI Filter Setting |
+-----------+-------------------+-----------------------------------+
| 16 B5~7 | not use | (0,0,0) |
| -------+-------------------+-----------------------------------+
| B4 | System Exclusive | 0/1=Disable/Enable |
| -------+-------------------+-----------------------------------+
| B3 | Note | 0/1=Disable/Enable |
| -------+-------------------+-----------------------------------+
| B2 | Control Change | 0/1=Disable/Enable |
| -------+-------------------+-----------------------------------+
| B1 | Program Change | 0/1=Disable/Enable |
| -------+-------------------+-----------------------------------+
| B0 | not use | (0) |
+-----------+-------------------+-----------------------------------+
| 17 B2~7 | not use | (0,0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0,1 | Clock Setting | 0~2=Internal/External/Auto |
+-----------+-------------------+-----------------------------------+
| 18,19 | BPM Value | 200~3000=BPM:20.0~300.0 |
+-----------+-------------------+-----------------------------------+
| 20 | Last LoopSmplTrig | 0~3=--/-G/R-/RG (#11-2) |
+-----------+-------------------+-----------------------------------+
| 21 | Last ShotSmplTrig | 0/1=R-/RG (Reset,Gate) (#11-2) |
+-----------+-------------------+-----------------------------------+
| 22 | LooperType Setting| 0/1=Type1/Type2 (#11-3) |
+-----------+-------------------+-----------------------------------+
| 23 | Smpl Loop Length | 0~4=1,2,4,8,16 Beat |
+-----------+-------------------+-----------------------------------+
| 24~31 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| MIDI Message Assignment |
+-----------+-------------------+-----------------------------------+
| 32 B4~7 | not use | (0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~3 | Global MIDI Ch. | 0~15=1~16 |
+-----------+-------------------+-----------------------------------+
| 33 | SmplBankA Assign | 0~127=Note#, 128~:Off |
+-----------+-------------------+-----------------------------------+
| 34 | SmplBankB Assign | (same as SmplBankA Assign Format) |
+-----------+-------------------+-----------------------------------+
| 35 | SmplBankC Assign | (same as SmplBankA Assign Format) |
+-----------+-------------------+-----------------------------------+
| 36 | SmplBankD Assign | (same as SmplBankA Assign Format) |
+-----------+-------------------+-----------------------------------+
| 37 | PadX-direc Assign | 0~127=ControlChange#, 128~:Off |
+-----------+-------------------+-----------------------------------+
| 38 | PadY-direc Assign | (same as PadX-direc Assign Format)|
+-----------+-------------------+-----------------------------------+
| 39 | Pad Touch Assign | (same as PadX-direc Assign Format)|
+-----------+-------------------+-----------------------------------+
| 40 | Fx Depth Assign | (same as PadX-direc Assign Format)|
+-----------+-------------------+-----------------------------------+
| 41 | Slider Assign | (same as PadX-direc Assign Format)|
+-----------+-------------------+-----------------------------------+
| 42 | Hold SW Assign | (same as PadX-direc Assign Format)|
+-----------+-------------------+-----------------------------------+
| 43~63 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| External Control Mode |
+-----------+-------------------+-----------------------------------+
| 64 B4~7 | not use | (0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~3 | External Setting# | 0~6=Pattern1~7 |
+-----------+-------------------+-----------------------------------+
| 65~79 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| 80 B7 | SmplBankA Status | 0/1=NoAssign/Assign Enable |
| -------+-------------------+-----------------------------------+
| B6 | SmplBankA SW Type | 0/1=Momentary/Toggle |
| -------+-------------------+-----------------------------------+
| B4,5 | RealTime Assign | 0/1/2/3=non/Start/Continue/Stop |
| -------+-------------------+-----------------------------------+
| B0~3 | SmplBankA MIDI Ch.| 0~15=1~16 |
+-----------+-------------------+-----------------------------------+
| 81 B7 | SBankA Assign Type| 0/1=Note# Assign/CC# Assign |
| -------+-------------------+-----------------------------------+
| B0~6 | SmplBankA Assing# | 0~127 CC:CC#, Note:Note# |
+-----------+-------------------+-----------------------------------+
| 82 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | SBA NoteOff Value | 0~127 |
+-----------+-------------------+-----------------------------------+
| 83 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | SBA NoteOn Value | 0~127 |
+-----------+-------------------+-----------------------------------+
| 84~87 | SmplBankB Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 88~91 | SmplBankC Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 92~95 | SmplBankD Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 96~99 | ProgMemo1 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 100~103 | ProgMemo2 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 104~107 | ProgMemo3 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 108~111 | ProgMemo4 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 112~115 | ProgMemo5 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 116~119 | ProgMemo6 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 120~123 | ProgMemo7 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 124~127 | ProgMemo8 Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 128~131 | Hold SW Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 132~135 | Pad Touch Assign | (same as Ext.SBankA Assign Format)|
+-----------+-------------------+-----------------------------------+
| 136 B7 | Fx Depth Status | 0/1=NoAssign/Assign Enable |
| -------+-------------------+-----------------------------------+
| B4~6 | not use | (0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~3 | Fx Depth MIDI Ch. | 0~15=1~16 |
+-----------+-------------------+-----------------------------------+
| 137 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | FxDepth CC Number | 0~127 |
+-----------+-------------------+-----------------------------------+
| 138 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | FxDepth Max Value | 0~127 |
+-----------+-------------------+-----------------------------------+
| 139 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | FxDepth Min Value | 0~127 |
+-----------+-------------------+-----------------------------------+
| 140~143 | Slider Assign | (same as Ext.Fx Depth Asgn Format)|
+-----------+-------------------+-----------------------------------+
| 144~191 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+
| 192 B7 | Pad 1 Asgn Status | 0/1=NoAssign/Assign Enable |
| -------+-------------------+-----------------------------------+
| B4~6 | not use | (0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~3 | Pad 1 MIDI Ch. | 0~15=1~16 |
+-----------+-------------------+-----------------------------------+
| 193 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | Pad 1 CC Number | 0~127 |
+-----------+-------------------+-----------------------------------+
| 194,195 | (Pad 1 reserved) | |
+-----------+-------------------+-----------------------------------+
| 196~199 | Pad 2 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 200~203 | Pad 3 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 204~207 | Pad 4 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 208~211 | Pad 5 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 212~215 | Pad 6 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 216~219 | Pad 7 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 220~223 | Pad 8 Assign | (same as Ext.Pad 1 Assign Format) |
+-----------+-------------------+-----------------------------------+
| 224~255 | (dummy bytes) |
+-----------+-------------------+-----------------------------------+

TABLE 3 : Sample Header Parameter

+-----------+-------------------+-----------------------------------+
| No. (bit)| PARAMETER | VALUE DESCRIPTION |
+-----------+-------------------+-----------------------------------+
| 0~3 | Sample DSP Address| 0(= no Sample)~ |
+-----------+-------------------+-----------------------------------+
| 4~7 | Sample Length | (60 / BPM * fs * BeatNum) <<10 |
+-----------+-------------------+-----------------------------------+
| 8,9 | Sample BPM Value | 200~3000=BPM:20.0~300.0 |
+-----------+-------------------+-----------------------------------+
| 10 | Smpl Trigger Type | Lp:0~3=--/-G/R-/RG,Shot:0/1(#11-2)|
+-----------+-------------------+-----------------------------------+
| 11 | Slice Bit Pattern | Slice 1~8 Off/On: 0/1 |
+-----------+-------------------+-----------------------------------+
| 12 | Sample Beat | 0~4=1,2,4,8,16beat |
+-----------+-------------------+-----------------------------------+
| 13 B1~7 | not use | (0,0,0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0 | Sample Type | 0/1=OneShot/Loop |
+-----------+-------------------+-----------------------------------+
| 14 B3~7 | not use | (0,0,0,0,0) |
| -------+-------------------+-----------------------------------+
| B0~2 | DSP SampleMemory# | 0~4 |
+-----------+-------------------+-----------------------------------+
| 15 B7 | not use | (0) |
| -------+-------------------+-----------------------------------+
| B0~6 | Sample Player Lvl | 0~127 |
+-----------+-------------------+-----------------------------------+

- Revision History -

Rev 1.0 Jun. 20.'06 Initial Release.

Rev 1.1 Sept.10.'07 System Version 2.00
Support new error messages. (#11-1)
Add Sample-Trigger parameter. (#11-2)
Add Looper-Type setting parameter. (#11-3)